Metal-enhanced fluorometric formaldehyde assay based on the use of in-situ grown silver nanoparticles on silica-encapsulated carbon dots

M13 bacteriophage based fluorescence immunoassay against food allergens of Ara h 3 and Mac i 1

Food allergy is increasingly prevalent and poses notable health risks, which underscores the urgent need to develop reliable and sensitive detection methods for effective identification of food allergens. This study aims to address the limitations of existing methods by developing an immunoassay utilizing bacteriophage/carbon dots (CDs)@silica core-shell nanospheres. Two CDs with different emission wavelengths (513 nm for Green CDs, 645 nm for Red CDs) were synthesized for signal development and amplification. The nanobodies (Nbs) displayed on M13 bacteriophage were employed for the rapid fluorescence quantification of peanut allergen Ara h 3 and macadamia allergen Mac i 1 through magnetic separation. Generally, the method was established with detection limits of 9.5 and 10.2 ng/mL for Ara h 3 and Mac i 1, respectively, demonstrating a sensitivity of 2-5 times greater than traditional methods. Collectively, this multiplexed testing offers a potential analytical strategy based on bacteriophage for effective screening of food allergens.

A Novel Fluorescent and Colorimetric Method for the Determination of Formaldehyde Based on Albumin Nanoparticles-Polyethyleneimine-Ag+ Ion Nanohybrids

As a carcinogenic substance, high dose of formaldehyde exposure may lead to poisoning and even death. Long-term exposure to low doses of formaldehyde can harm human skin, respiratory organs and immune system. Therefore, it is vital to detect formaldehyde content in real time. In this paper, a simple method for the determination of formaldehyde based on fluorometry and colorimetry was established in the range of 0-1.92 mg·mL-1. A fluorescence protein nanoparticles (BSA NPs) was prepared utlizing bovine serum albumin (BSA) as the raw material. Based on the silver mirror reaction, silver nanoparticles can be generated from the reaction between BSA NPs combined with polyethylenimide (PEI) and silver ion (Ag+) ions complex (BSA NPs-PEI-Ag) and formaldehyde. The fluorescent detection principle for formaldehyde was based on the fluorescence queching of BSA NPs-PEI-Ag system at 514 nm upon the reduction of Ag+ ions by formaldehyde. The colorimetric detection principle for formaldehyde was based on the enhancement of absorption band of BSA NPs-PEI-Ag system at 460 nm and color changes along with the generation of silver nanoparticles after the addition of formaldehyde. The proposed method was succesfully used for formaldehyde detection in real water sample with the recovery range of 106-110%.

Ratiometric fluorescence detection of dopamine based on copper nanoclusters and carbon dots

Nanoclusters for fluorescence detection are generally comprised of rare and expensive noble metals, and the nanoclusters based on more affordable transition metal have attracted increasing attention. This study designed a ratiometric fluorescent probe to detect dopamine (DA), an important neurotransmitter. With carbon dots encapsulated within silica (CDs@SiO2) as the reference, the emitted reference signal was almost unchanged due to the protection of inert silicon shell. Meanwhile, copper nanoclusters modified with 3-aminophenyl boronic acid (APBA-GSH-CuNCs) provided the sensing signal, in which the phenylboric acid could specifically recognize the cis-diol structure of DA, and caused the fluorescence quenching by photoinduced electron transfer. This dual emission ratiometric fluorescent probe exhibited high sensitivity and anti-interference, and was able to selectively responded to DA with a linear range of 0-1.4 mM, the detection limit of 5.6 nM, and the sensitivity of 815 mM-1. Furthermore, the probe successfully detected DA in human serum samples, yielding recoveries ranging from 92.5% to 102.7%. Overall, this study highlights the promising potential of this ratiometric probe for detecting DA.

Fluorimetric determination of aqueous formaldehyde employing heating and ultrasound-assisted approach through its derivatization with a ß-diketone-nickel(2+) complex immobilized in a PMMA flow cell

Formaldehyde (FA) is a highly toxic substance present in many matrices, including freshwater as well as found in natural mechanisms such as rainfall and combustion of organic matter. Consumption of water contaminated with high levels of FA can cause severe short-term or long-term health problems. Due to these health risks, procedures are necessary to determine and quantify FA in aqua sources This paper reports on a study of fluorimetric determination of FA using a nickel(2 + )-diketonate coordination compound immobilized as a solid precursor. The compound was characterized by electronic absorption, Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), thermogravimetry (TG), optical microscopy (OM), and scanner electron microscopy (SEM). The methodology was based on the reaction of the synthesized compound with an ammoniacal buffer generating a selective reagent for formaldehyde: fluoral-P. The product of the reaction generates 3,5-diacetyl-1,4-dihydrolutidine (DDL), which is responsible for the fluorescence of the system. Several parameters such as temperature, duration of heating time, and dilution effect with the best effects were studied to carry out FA determination. Under the optimum experimental conditions, a linear response ranging from 1.0 to 10.0 mg/L FA (R = 0.997 and n = 10), and a detection (3σ criterion) and quantification (10 σ criterion) limit estimated at 0.129 and 0.389 mg/L, respectively were achieved. The FA analysis was able to be conducted in 05 min with a relative standard deviation estimated at 1.10 %.

RGB color analysis of formaldehyde in vegetables based on DNA functionalized gold nanoparticles and triplex DNA

A highly sensitive and selective RGB color analysis for the detection of formaldehyde (FA) was developed by using a DNA functionalized gold nanoparticle (AuNPs-DNA) probe. When complementary oligonucleotides (oligo 2 and oligo 3) and a silver ion (Ag⁺) were added to the AuNPs-DNA solution, triplex DNA was formed, resulting in the aggregation of AuNPs, and accompanied by a solution color change from red to purple. With the addition of formaldehyde, it reacted with Ag⁺, decreased the stability of triplex DNA between AuNPs-DNA, induced the dispersion of AuNPs, and the color of AuNPs recovered to red. Therefore, the formaldehyde concentration could be estimated with the RGB (red, green, blue) values of the AuNP solution by using a smartphone application (APP). The R value of the system was proportional to the concentration of formaldehyde within the range of 0.23-4.50 mg L^-1, with a detection limit of 0.14 mg L^-1. The method has been successfully applied to detect the residues of formaldehyde in vegetable samples and has the potential of the on-site determination of formaldehyde.

A Brief Review of Carbon Dots-Silica Nanoparticles Synthesis and their Potential Use as Biosensing and Theragnostic Applications

Carbon dots (CDs) are carbon nanoparticles with sizes below 10 nm and have attracted attention due to their relatively low toxicity, great biocompatibility, water solubility, facile synthesis, and exceptional photoluminescence properties. Accordingly, CDs have been widely exploited in different sensing and biomedical applications, for example, metal sensing, catalysis, biosensing, bioimaging, drug and gene delivery, and theragnostic applications. Similarly, the well-known properties of silica, such as facile surface functionalization, good biocompatibility, high surface area, and tunable pore volume, have allowed the loading of diverse inorganic and organic moieties and nanoparticles, creating complex hybrid nanostructures that exploit distinct properties (optical, magnetic, metallic, mesoporous, etc.) for sensing, biosensing, bioimaging, diagnosis, and gene and drug delivery. In this context, CDs have been successfully grafted into diverse silica nanostructures through various synthesis methods (e.g., solgel chemistry, inverse microemulsion, surfactant templating, and molecular imprinting technology (MIT)), imparting hybrid nanostructures with multimodal properties for distinct objectives. This review discusses the recently employed synthesis methods for CDs and silica nanoparticles and their typical applications. Then, we focus on combined synthesis techniques of CD-silica nanostructures and their promising biosensing operations. Finally, we overview the most recent potential applications of these materials as innovative smart hybrid nanocarriers and theragnostic agents for the nanomedical field.

A novel signal-on fluorometric sensor based on metal ion-mediated carbon dots for formaldehyde determination and lysosome-targeted bioimaging

Preparation of Ag-M-NSCDs for the fluorometric detection of formaldehyde and lysosome-targeted bioimaging.

Old silver mirror in qualitative analysis with new shoots in quantification: Nitrogen-doped carbon dots (N-CDs) as fluorescent probes for "off-on" sensing of formalin in food samples

A novel fluorometric assay for selective and sensitive determination of formalin (FA) was developed based on nitrogen-doped carbon dots (N-CDs) coupled with silver mirror reaction. N-CDs was synthesized using the hydrothermal method with the ethylene glycol and ammonia solution as carbon and nitrogen precursors, respectively. The detection principle was based on "off-on" fluorescence switching. Specifically, the fluorescence signal of N-CDs was first turned off after incorporating the Ag⁺ and Tollens' reagents. Then, in the presence of FA, the Ag⁺ species on the N-CDs surface were reduced to Ag⁰ species and the fluorescence signal of N-CDs was switched back on. The fluorescence intensity due to the N-CDs signal linearly increased with the increasing FA concentrations in the range of 5-100 mg L^-1, with the detection limit of 1.5 mg L^-1. The proposed approach provides rapid, simple, sensitive, and selective detection of FA in various food samples.

Silane-Functionalized Carbon Dots and Their Polymerized Hybrids: From Optoelectronics to Biotherapy

Nanomaterials usually manifest unique properties in solutions but will be undermined in the solid state. It is necessary to incorporate them into substrates or hybrid them with other functional materials for multiple devices and applications. Though there are a variety of methods to inherit their intrinsic properties like fluorescent and mechanical performance, most nanohybrid materials would lose their transparency irreversibly when construct solid-state devices. As a hot topic of nanomaterials in recent years, scientific works found a type of carbon dots using silane coupling agents as precursors that can overcome the shortcoming. These carbon dots, called silane-functionalized carbon dots (SiCDs), are catching increasing interest due to their versatility. Silane coupling agents endow SiCDs with the ability to disperse in solvents or polymerize with matrices by blending or covalent bonds without loss of transparency and decline of performance. The distinguishing features make SiCDs an ideal high transmittance, high doping concentration nanomaterial. The synergistic effect of SiCDs and hybridized sol-gel solid structures can not only hold the optical features of CDs but also enhance their original physical and chemical performance. This highlight focuses on the connection between SiCDs and organosilanes. Plus, preparation methods, applications, and prospective of SiCDs are mentioned.

Enhanced Tb(III) fluorescence on gelatin-coated silver nanoparticles in dopamine detection

A composite fluorescent nanoprobe based on metal enhanced fluorescence (MEF) effect of gelatin-coated silver nanoparticles (AgNPs@gel) was developed for selective and sensitive detection of dopamine (DA). The characteristic fluorescence of Tb(III) was using as the detection signal and AgNPs@gel served as substrates of the MEF. Gelatin with rich amine and carboxylic groups was used not only as a co-ligand of Tb(III) complex, but also as a bridging substance and a spacing material for improving the MEF of AgNPs@gel on the intrinsic luminescent intensity of Tb(III). Under the optimal conditions, the increment of the fluorescence intensity (measured at 307/544 nm as excitation/emission wavelength) of the system increased linearly with the concentration of DA in the range of 0.80-100 nM (R² = 0.9937) and 100-1000 nM (R² = 0.9978). The fluorescent probe greatly improved Tb(III) luminescence, which paved the way for sensitive detection with a low detection limit of 0.54 nM. It also showed good selectivity among other neurotransmitters. This work was successfully applied to the determination of DA in human serum samples with recoveries ranging from 99.8 to 102.2%. We believe that the Tb(III)-DA-AgNPs@gel composite fluorescent probe can be developed as a new approach for DA detection.

Selective formaldehyde detection at ppb in indoor air with a portable sensor

Formaldehyde is a carcinogenic indoor air pollutant emitted from wood-based furniture, building materials, paints and textiles. Yet, no low-cost sensor exists for on-site monitoring to fulfill stringent current and upcoming (e.g., 8 parts-per-billion by volume, ppb, in France by 2023) exposure guidelines. Here, we present an inexpensive and handheld formaldehyde detector with proven performance in real indoor air. Selectivity is achieved by a compact packed bed column of nanoporous polymer sorbent that separates formaldehyde from interferants present in ambient air. Downstream, a highly sensitive nanoparticle-based chemoresistive Pd-doped SnO₂ sensor detects formaldehyde in the relevant concentration range down to 5 ppb within 2 min. As a proof-of-concept, we measured formaldehyde in indoor air and from different wood product emissions, in excellent agreement (R² > 0.98) with high-resolution proton-transfer-reaction time-of-flight mass spectrometry. This detector is simple-in-use and readily applicable for on-site formaldehyde exposure monitoring at home or work. It is promising for internet-of-things (IOT) sensing networks or even wearables for personal exposure assessment.

Luminescent Transparent Wood Based on Lignin-Derived Carbon Dots as a Building Material for Dual-Channel, Real-Time, and Visual Detection of Formaldehyde Gas

Formaldehyde (FA) is a widespread indoor air pollutant, and its efficient detection is a major industrial challenge. The development of a building material with real-time and visual self-detection of FA gas is highly desirable for meeting both construction and human health demands. Herein, a luminescent transparent wood (LTW) as the building material was developed for dual-channel, real-time, and visual detection of FA gas. It was fabricated by encapsulating multicolor lignin-derived carbon dots (CDs) and poly(vinyl alcohol) (PVA) into a delignified wood framework. It exhibited 85% optical transmittance, tunable room-temperature phosphorescence (RTP), and ratiometric fluorescence (FL) emission. The tunable luminescence was attributed to different CD graphitization and surface functionalization. The color-responsive ratiometric FL and delayed RTP detections of FA were displayed over the range of 20-1500 μM (R² = 0.966, LOD = 1.08 nM) and 20-2000 μM (R² = 0.977, LOD = 45.8 nM), respectively. The LTW was also used as an encapsulation film on a UV-emitting InGaN chip to form white light-emitting diodes, indicating the feasibility as an FA-responsive planar light source. The operational notion of functional LTW can expand its applications to new fields such as a stimuli-responsive light-transmitting window or planar light sources while monitoring indoor air pollutants, temperature, and humidity.