ZIF-67 MOF-derived Co nanoparticles supported on N-doped carbon skeletons for the amperometric determination of hydrogen peroxide

Iron/manganese-zeolitic imidazolate framework (Fe/Mn-ZIF) nanozyme combined with acetylcholinesterase for colorimetric rapid detection of organophosphorus pesticides

Organophosphorus pesticides (OPs) are extensively utilized in agricultural production, but they pose significant threats to environment and organisms. This study aims to develop a novel method for the rapid and efficient detection of OPs. Initially, an iron/manganese zeolitic imidazolate framework (Fe/Mn-ZIF) with excellent oxidase-like activity was synthesised. The catalytic performance was evaluated, and the main factors influencing catalytic activity were investigated. Subsequently, a combined acetylcholinesterase assay was employed to detect three OPs. The specificity and recyclability of Fe/Mn-ZIF were also studied. The proposed colorimetric strategy demonstrated strong linear relationships: 0.1-2 mg/L for trichlorfon, 0.2-14 mg/L for glyphosate, and 0.4-10 mg/L for glufosinate, with the low detection limits of 0.024, 0.080, and 0.121 mg/L (3 S/N) respectively. Good recoveries were observed in real sample detection. This work lays a foundation for enhancing the catalytic performance of Fe/Mn-ZIF, which holds promise for biosensing applications.

Fabrication of polyoxometalate dispersed cobalt oxide nanowires for electrochemically monitoring superoxide radicals from Hela cell mitochondria

An ultrasensitive electrochemical sensor is constructed by electrostatically adsorbing negatively charged hourglass-shape Cu-Polyoxometalate (POM) onto a positively charged CoO nanowires modified carbon cloth. The petaloid CoO nanowires have a large specific surface area that can well disperse open-structured Cu-POM to form Cu-POM@CoONWs@CC, which can maximumly expose catalytic active centers (Co2+ and Cu2+) and accelerate mass/charge transfer. In addition to the above advantages, the excellent electron exchange ability of Cu-POM and good conductivity of CoONWs@CC endow the sensor with good detection capability to H2O2 including a linear detection range of 0.05-1.4 μA μM-1, a low detection limit of 0.022 μM, high sensitivity of 110.48 μA μM-1, good selectivity and long-term stability. Due to the fast transformation of superoxide anion (O2∙-) to H2O2, the sensor can indirectly monitor the electron leakage resulting in the formation of O2∙- via detecting H2O2. Afterwards, Hela cell mitochondria were extracted from the living cells that cultured with different mitochondrial inhibitors and the release of O2∙- from the corresponding mitochondrial complexes was monitored by the sensor. Through comparing the current signals, we determined that complex I is probably the main electron leakage site. This work could provide meaningful information for the diagnosis of certain oxidative stress diseases.

Controllable synthesis of Co/NC catalysts with high-density Co-N x active sites derived from Co/Zn-ZIF for cyclopropanation

Novel Co/NC heterogeneous catalysts were prepared by simply employing self-made Co/Zn-ZIF (zeolitic imidazolate framework) through pyrolysis. The samples were characterized by XRD, XPS, Raman, TEM and BET, and were successfully applied in a cyclopropanation reaction with a yield of 85%. Furthermore, this one-pot synthesized catalyst could be recycled several times without apparent deactivation. The content of Co-N x active sites could be modified by adjusting the Co/Zn molar ratio of the ZIF precursor. The generation of Co-N x could be attributed to the evaporation of Zn species, which provides rich micropores.

A ratiomectic aptasensor with enhanced signals based on peroxidase-like enzymes and NH2-MIL-101@MoS2 for trace detection of deoxynivalenol in traditional Chinese herbs

The accumulation of the deoxynivalenol (DON) in the human body poses a significant health risk that is often overlooked, and we urgently need an ultra-sensitive rapid detection platform. Due to the porosity of NH2-MIL-101@MoS2, an increased loading of toluidine blue (TB) serves to create a signal reference. Cobalt@carbon (CoC) derived from metal organic frameworks was combined with NH2-MIL-101(NH2-MIL-101@CoC) to form an enzyme-free Nanoprobe (Apt-pro) with significant catalytic properties. The ratio (IBQ /ITB) was changed by varying the electrochemical signal of benzoquinone (BQ) (IBQ) and the amount of TB deposition (ITB). This aptasensor was successfully applied to detect DON in malt and peach seed, which exhibited a great linear range from 1 fg/mL to 10 ng/mL and low detection limit of 0.31 fg/mL for DON.

Schiff Base Functionalized Cellulose: Towards Strong Support-Cobalt Nanoparticles Interactions for High Catalytic Performances

A new hybrid catalyst consisting of cobalt nanoparticles immobilized onto cellulose was developed. The cellulosic matrix is derived from date palm biomass waste, which was oxidized by sodium periodate to yield dialdehyde and was further derivatized by grafting orthoaminophenol as a metal ion complexing agent. The new hybrid catalyst was characterized by FT-IR, solid-state NMR, XRD, SEM, TEM, ICP, and XPS. The catalytic potential of the nanocatalyst was then evaluated in the catalytic hydrogenation of 4-nitrophenol to 4-aminophenol under mild experimental conditions in aqueous medium in the presence of NaBH4 at room temperature. The reaction achieved complete conversion within a short period of 7 min. The rate constant was calculated to be K = 8.7 × 10-3 s-1. The catalyst was recycled for eight cycles. Furthermore, we explored the application of the same catalyst for the hydrogenation of cinnamaldehyde using dihydrogen under different reaction conditions. The results obtained were highly promising, exhibiting both high conversion and excellent selectivity in cinnamyl alcohol.

ZIF-67-Derived Co/N-Doped Carbon-Functionalized MXene for Enhanced Electrochemical Sensing of Carbendazim

Herein, ZIF-67-derived Co and N-doped carbon (Co/NC) particle-modified multilayer MXene (MXene@Co/NC) was developed as remarkable electrode material for carbendazim (CBZ) detection. MXene as a substrate provides an excellent conductive framework and plentiful accessibility sites. Co/NC particles embedding in MXene can not only prevent the interlayer stacking of MXene but also contribute a great deal of metal catalytic active sites and finally improve the adsorption and catalytic properties of the composite. Accordingly, the MXene@Co/NC electrode displays excellent electrocatalytic activity toward CBZ oxidation. Experimental parameters such as pH value, accumulation time, MXene@Co/NC modification volume and constituent materials' mass ratios were optimized. Under optimal conditions, the as-prepared sensor based on MXene@Co/NC holds a broad linearity range from 0.01 μM to 45.0 μM with a low limit of detection (LOD) of 3.3 nM (S/N = 3, S means the detection signal, while N represents the noise of the instrument). Moreover, the proposed sensor displays excellent anti-interference ability, superior reproducibility, excellent stability, and successfully achieves actual applications for CBZ detection in a lettuce sample.

In vitro toxicological assessment and biosensing potential of bioinspired chitosan nanoparticles, selenium nanoparticles, chitosan/selenium nanocomposites, silver nanoparticles and chitosan/silver nanocomposites

Hydrogen peroxide (H₂O₂) is widely used in various industries and biological fields. H₂O₂ rapidly contaminants with water resources and hence simple detection process is highly wanted in various fields. The present study was focused on the biosensing, antimicrobial and embryotoxicity of bioinspired chitosan nanoparticles (Cs NPs), selenium nanoparticles (Se NPs), chitosan/selenium nanocomposites (Cs/Se NCs), silver nanoparticles (Ag NPs) and chitosan/silver nanocomposites (Cs/Ag NCs) synthesized using the aqueous Cucurbita pepo Linn. leaves extract. The physico-chemical properties of as-synthesized nanomaterials were confirmed by various spectroscopic and microscopic techniques. Further, hydrogen peroxide (H₂O₂) sensing properties and their sensitivities were confirmed by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and chronoamperometry (CA) methods, in which Cs/Ag NCs showed pronounced sensing properties. In addition, the mode of antibacterial interaction results clearly demonstrated the effective inhibitory activity of as-prepared Ag NPs and Cs/Ag NCs against Gram negative pathogenic bacteria. The highest embryotoxicity was recorded at 0.19 μg/ml of Ag NPs and 1.56 μg/ml of Se NPs. Intriguingly, the embryo treated with Cs/Se NCs and Cs/Ag NCs significantly reduced the toxicity in the presence of Cs matrix. However, Cs/Se NCs did not show good response in H₂O₂ sensing than the Cs/Ag NCs, implying the biocompatibility of Cs/Ag NCs. Overall, the obtained results clearly suggest that Cs/Ag NCs could be suitable for dual applications such as for the detection of environmental pollutant biosensors and for biomedical research.

Metal–Organic Frameworks for Electrocatalytic Sensing of Hydrogen Peroxide

The electrochemical detection of hydrogen peroxide (H₂O₂) has become more and more important in industrial production, daily life, biological process, green energy chemistry, and other fields (especially for the detection of low concentration of H₂O_2). Metal organic frameworks (MOFs) are promising candidates to replace the established H₂O₂ sensors based on precious metals or enzymes. This review summarizes recent advances in MOF-based H₂O₂ electrochemical sensors, including conductive MOFs, MOFs with chemical modifications, MOFs-composites, and MOF derivatives. Finally, the challenges and prospects for the optimization and design of H₂O₂ electrochemical sensors with ultra-low detection limit and long-life are presented.