Label-free fluorescence detection of hydrogen peroxide and glucose based on the Ni-MOF nanozyme-induced self-ligand emission

One-step cascade method via glucose oxidase-copper ion complex for detecting glucose using a portable device

In this study, a one-step cascade fluorescence method was developed for the detection of glucose in honey, based on the glucose oxidase-copper ion complexes (GOx@Cu2+). These complexes exhibit dual enzymatic activities-glucose oxidase and peroxidase-like activities-which enable them to catalyze a cascade reaction. This reaction involves the oxidation of glucose and o-phenylenediamine (OPD), leading to the formation of 2,3-diaminophenazine (oxOPD), a compound with fluorescent properties. The proposed method overcomes the challenges of pH mismatch between enzymes and streamlines the testing process, eliminating the need for nanomaterial preparation and reducing the detection time to just 20 min. The feasibility of the method was validated by analyzing three honey samples, achieving recoveries between 96.4 % and 106 %, with relative standard deviations of less than 1.9 %. The selectivity and accuracy of the method were verified by capillary electrophoresis in three honey samples. Moreover, a self-designed portable device was introduced to enable on-site glucose detection.

Facile synthesis of water-soluble and pH-stable silicon quantum dots and their application in enzyme-free hydrogen peroxide sensing

A sensor for non-enzymatic hydrogen peroxide (H2O2) detection was developed based on silicon quantum dots (SiQDs). The fluorescent SiQDs were synthesized using a one-pot hydrothermal method. The SiQDs were made water-soluble and pH-stable by covering their surfaces with amino and hydroxyl groups. Additionally, the prepared SiQDs had a large Stokes shift (131 nm), excellent photostability (442 min), and hypotoxicity (e.g., 99% cell viability was retained after a 24 h-treatment at 8.0 mg mL-1 of SiQDs). The dynamic quenching effect induced by H2O2 effectively suppresses the blue fluorescence of SiQDs. Under the optimum conditions, the SiQD-based H2O2 sensor exhibited a wide linear range (10-1000 μM), high sensitivity and selectivity, and good anti-interference ability. The detection limit and relative standard deviation were 1.7 μM and 4.5% (c = 20 μM, n = 7), respectively. Accordingly, a simple, enzyme-free, and highly efficient method was established for detecting H2O2 in aqueous solutions. Moreover, this eco-friendly fluorescent sensor successfully determined the H2O2 concentration in human serum samples with 92.0-102.4% recoveries.

A step towards non-invasive diagnosis of diabetes mellitus using in situ synthesized MOF-MXene hybrid material with extended gate field-effect transistor integration

The increasing demand for non-invasive and non-enzymatic glucose sensors is driven by the objective of eliminating the need for blood pricks from the body and enabling enzyme-free detection of glucose for diagnosing diabetes mellitus. To address this need, we synthesized Ni MOF-MXene (NiBDC-MXene) hybrid material through a one-pot synthesis method, which acts as a catalyst to detect salivary glucose using an extended gate field effect transistor (EGFET) method. The resulting sensor exhibits good selectivity towards glucose over common interfering molecules such as sucrose, fructose, maltose, uric acid, and ascorbic acid under physiological conditions in saliva. The fabricated electrode demonstrated high sensitivity of 531.78 μA mM-1 cm-2 with a detection range of 10 μM to 1100 μM, a sensor response time of less than 5 s, and a limit of detection (LOD) of 0.29 μM. The real saliva sample measurements under postabsorptive and postprandial conditions highlight the electrode's effectiveness in detecting salivary glucose. In addition to EGFET measurements, scanning Kelvin probe (SKP) measurements were performed to understand the mechanism of charge transfer between the glucose and NiBDC-MXene/CP electrode. Overall, the EGFET results demonstrate the capability of the sensor to detect salivary glucose in hypoglycemia, normal, and hyperglycemia ranges.

The Fluorescent Detection of Glucose and Lactic Acid Based on Fluorescent Iron Nanoclusters

In this paper, a novel fluorescent detection method for glucose and lactic acid was developed based on fluorescent iron nanoclusters (Fe NCs). The Fe NCs prepared using hemin as the main raw material exhibited excellent water solubility, bright red fluorescence, and super sensitive response to hydrogen peroxide (H2O2). This paper demonstrates that Fe NCs exhibit excellent peroxide-like activity, catalyzing H2O2 to produce hydroxyl radicals (•OH) that can quench the red fluorescence of Fe NCs. In this paper, a new type of glucose sensor was established by combining Fe NCs with glucose oxidase (GluOx). With the increase in glucose content, the fluorescence of Fe NCs decreases correspondingly, and the glucose content can be detected in the scope of 0-200 μmol·L-1 (μM). Similarly, the lactic acid sensor can also be established by combining Fe NCs with lactate oxidase (LacOx). With the increase in lactic acid concentration, the fluorescence of Fe NCs decreases correspondingly, and the lactic acid content can be detected in the range of 0-100 μM. Furthermore, Fe NCs were used in the preparation of gel test strip, which can be used to detect H2O2, glucose and lactic acid successfully by the changes of fluorescent intensity.

Ratiometric luminescence detection of H2O2 in food samples using a terbium coordination polymer sensitized with 3-carboxyphenylboronic acid

A ratiometric luminescent probe was fabricated using adenosine monophosphate (AMP) as a bridging ligand and 3-carboxyphenylboronic acid (3-CPBA) as the sensitizer and functional ligand that allowed the probe to recognize hydrogen peroxide (H2O2). The probe was labeled AMP-Tb/3-CPBA. Adding H2O2 caused the nonluminescent 3-CPBA to be converted into 3-hydroxybenzoic acid, which strongly luminesces at 401 nm. This meant that adding H2O2 decreased the AMP-Tb/3-CPBA luminescence intensity at 544 nm and caused luminescence at 401 nm. The 401 and 544 nm luminescence intensity ratio (I401/I544) was strongly associated with the H2O2 concentration between 0.1 and 60.0 μM, and the detection limit was 0.23 μM. Dual emission reverse-change ratio luminescence sensing using the probe allowed environmental effects to be excluded and the assay to be very selective. We believe that the results pave the way for the development of new functionalized lanthanide coordination polymers for use in luminescence assays.

Advancing stroke therapy: the potential of MOF-based nanozymes in biomedical applications

In this study, we explored the growing use of metal-organic framework (MOF)-based Nanozymes in biomedical research, with a specific emphasis on their applications in stroke therapy. We have discussed the complex nature of stroke pathophysiology, highlighting the crucial role of reactive oxygen species (ROS), and acknowledging the limitations of natural enzymes in addressing these challenges. We have also discussed the role of nanozymes, particularly those based on MOFs, their structural similarities to natural enzymes, and their potential to improve reactivity in various biomedical applications. The categorization of MOF nanozymes based on enzyme-mimicking activities is discussed, and their applications in stroke therapy are explored. We have reported the potential of MOF in treating stroke by regulating ROS levels, alleviation inflammation, and reducing neuron apoptosis. Additionally, we have addressed the challenges in developing efficient antioxidant nanozyme systems for stroke treatment. The review concludes with the promise of addressing these challenges and highlights the promising future of MOF nanozymes in diverse medical applications, particularly in the field of stroke treatment.

Recent progress of metal-organic framework-based nanozymes with oxidoreductase-like activity

Nanozymes, a class of synthetic nanomaterials possessing enzymatic catalytic properties, exhibit distinct advantages such as exceptional stability and cost-effectiveness. Among them, metal-organic framework (MOF)-based nanozymes have garnered significant attention due to their large specific surface area, tunable pore size and uniform structure. MOFs are porous crystalline materials bridged by inorganic metal ions/clusters and organic ligands, which hold immense potential in the fields of catalysis, sensors and drug carriers. The combination of MOFs with diverse nanomaterials gives rise to various types of MOF-based nanozyme, encompassing original MOFs, MOF-based nanozymes with chemical modifications, MOF-based composites and MOF derivatives. It is worth mentioning that the metal ions and organic ligands in MOFs are perfectly suited for designing oxidoreductase-like nanozymes. In this review, we intend to provide an overview of recent trends and progress in MOF-based nanozymes with oxidoreductase-like activity. Furthermore, the current obstacles and prospective outlook of MOF-based nanozymes are proposed and briefly discussed. This comprehensive analysis aims to facilitate progress in the development of novel MOF-based nanozymes with oxidoreductase-like activity while serving as a valuable reference for scientists engaged in related disciplines.

Enhanced Nanozymatic Activity on Rough Surfaces for H2O2 and Tetracycline Detection

The needless use of tetracyclines (TCs) in foodstuffs is a huge health concern in low- and middle-income and Arab countries. Herein, a sensitive and faster monitoring system for H2O2 and TCs is proposed, utilizing the large surface-to-volume ratio of a non-spherical gold nanoparticle/black phosphorus nanocomposite (BP-nsAu NPs) for the first time. BP-nsAu NPs were synthesized through a single-step method that presented nanozymatic activity through 3,3',5,5'-Tetramethylbenzidine (TMB) oxidation while H2O2 was present and obeyed the Michaelis-Menten equation. The nanozymatic activity of the BP-nsAu NPs was enhanced 12-fold and their detection time was decreased 83-fold compared to conventional nanozymatic reactions. The proposed method enabled us to quantify H2O2 with a limit of detection (LOD) value of 60 nM. Moreover, target-specific aptamer-conjugated BP-nsAu NPs helped us detect TCs with an LOD value of 90 nM. The present strategy provides a proficient route for low-level TC monitoring in real samples.

A Dual-Antioxidative Coating on Transmucosal Component of Implant to Repair Connective Tissue Barrier for Treatment of Peri-Implantitis

Since the microgap between implant and surrounding connective tissue creates the pass for pathogen invasion, sustained pathological stimuli can accelerate macrophage-mediated inflammation, therefore affecting peri-implant tissue regeneration and aggravate peri-implantitis. As the transmucosal component of implant, the abutment therefore needs to be biofunctionalized to repair the gingival barrier. Here, a mussel-bioinspired implant abutment coating containing tannic acid (TA), cerium and minocycline (TA-Ce-Mino) is reported. TA provides pyrogallol and catechol groups to promote cell adherence. Besides, Ce3+ /Ce4+  conversion exhibits enzyme-mimetic activity to remove reactive oxygen species while generating O2 , therefore promoting anti-inflammatory M2 macrophage polarization to help create a regenerative environment. Minocycline is involved on the TA surface to create local drug storage for responsive antibiosis. Moreover, the underlying therapeutic mechanism is revealed whereby the coating exhibits exogenous antioxidation from the inherent properties of Ce and TA and endogenous antioxidation through mitochondrial homeostasis maintenance and antioxidases promotion. In addition, it stimulates integrin to activate PI3K/Akt and RhoA/ROCK pathways to enhance VEGF-mediated angiogenesis and tissue regeneration. Combining the antibiosis and multidimensional orchestration, TA-Ce-Mino repairs soft tissue barriers and effector cell differentiation, thereby isolating the immune microenvironment from pathogen invasion. Consequently, this study provides critical insight into the design and biological mechanism of abutment surface modification to prevent peri-implantitis.

Recent advances in the colorimetric and fluorescence analysis of bioactive small-molecule compounds based on the enzyme-like activity of nanomaterials

Nanomaterials with enzyme-like activity have been widely used in the construction of colorimetric and fluorescence sensors due to their advantages of cost-effectiveness, high stability, good biocompatibility, and ease of modification. Furthermore, the colorimetric and fluorescence sensors, which are effective approaches for detecting bioactive small-molecule compounds, have been extensively explored due to their simple operation and high sensitivity. Recent significant researches have focused on designing various sensors based on nanozymes with peroxidase- and oxidase-like activity for the colorimetric and fluorescence analysis of different analytes. In this review, recent developments (from 2018 to present) in the colorimetric and fluorescent analysis of bioactive small-molecule compounds based on the enzyme-like activity of nanomaterials were summarized. In addition, the challenges and design strategies in developing colorimetric and fluorescent assays with high performance and specific sensing were discussed.

Conversion of senescent cartilage into a pro-chondrogenic microenvironment with antibody-functionalized copper sulfate nanoparticles for efficient osteoarthritis therapy

The development of osteoarthritis (OA) correlates with the expansion of senescent cells in cartilage, which contributes to an inflammatory microenvironment that accelerates matrix degradation and hampers cartilage generation. To address OA, we synthesized small copper sulfide nanoparticles functionalized with anti-beta-2-microglobulin antibodies (B2M-CuS NPs) that catalyze the formation of toxic •OH from H2O2 via peroxidase-like activity. These B2M-CuS NPs are specifically targeted to induce apoptosis in senescent chondrocytes while showing no toxicity toward normal chondrocytes. Furthermore, B2M-CuS NPs enhance the chondrogenesis of normal chondrocytes. Thus, B2M-CuS NPs can effectively treat OA by clearing senescent chondrocytes and promoting cartilage regeneration after intra-articular injection into the knee joints of surgery-induced OA mice. This study uses smart nanomaterials to treat OA with a synergistic strategy that both remodels senescent cartilage and creates a pro-chondrogenic microenvironment.

Electrochemical biomimetic enzyme cascade amplification combined with target-induced DNA walker for detection of thrombin

Fe-N-doped carbon nanomaterials (Fe-N/CMs) were designed as a novel biomimetic enzyme with excellent peroxidase-like activity to achieve high-efficient enzyme cascade catalytic amplification with the aid of glucose oxidase (GOx), which was further combined with target-induced DNA walker amplification to develop a sensitive electrochemical biosensor for thrombin detection. Impressively, massive output DNA was transformed from small amounts of target thrombin by highly effective DNA walker amplification as protein-converting strategy, which could then induce the immobilization of functionalized nanozyme on the electrode surface to achieve the high-efficient electrochemical biomimetic enzyme cascade amplification. As a result, an amplified enzyme cascade catalytic signal was measured for thrombin detection ranging from 0.01 pM to 1 nM with a low detection limit of 3 fM. Importantly, the new biomimetic enzyme cascade reaction coupled the advantages of natural enzyme and nanozyme, which paved an avenue to construct varied artificial multienzymes amplification systems for biosensing, bioanalysis, and disease diagnosis applications.

An Overview of the Design of Metal-Organic Frameworks-Based Fluorescent Chemosensors and Biosensors

Taking advantage of high porosity, large surface area, tunable nanostructures and ease of functionalization, metal-organic frameworks (MOFs) have been popularly applied in different fields, including adsorption and separation, heterogeneous catalysis, drug delivery, light harvesting, and chemical/biological sensing. The abundant active sites for specific recognition and adjustable optical and electrical characteristics allow for the design of various sensing platforms with MOFs as promising candidates. In this review, we systematically introduce the recent advancements of MOFs-based fluorescent chemosensors and biosensors, mainly focusing on the sensing mechanisms and analytes, including inorganic ions, small organic molecules and biomarkers (e.g., small biomolecules, nucleic acids, proteins, enzymes, and tumor cells). This review may provide valuable references for the development of novel MOFs-based sensing platforms to meet the requirements of environment monitoring and clinical diagnosis.

Nanozyme and Stimulated Fluorescent Cu-Based Metal-Organic Frameworks (Cu-MOFs) Functionalized with Engineered Aptamers as a Molecular Recognition Element for Thrombin Detection in the Plasma of COVID-19 Patients

An essential tool in the management and control of the COVID-19 pandemic is the development of a fast, selective, sensitive, and inexpensive COVID-19 biomarkers detection method. Herein, an ultrasensitive and label-free biosensing strategy was described for the colorimetric and fluorimetric detection of thrombin. A dual-mode aptasensing method based on integrating engineered ssDNA with a stimulated fluorescent enzyme-mimetic copper-based metal-organic framework (Cu-MOF) as a molecular recognition element for thrombin was investigated. Cu-MOFs displayed stimulated fluorescence and enzyme-mimetic peroxidase activities that oxidize the chromogenic colorless substance TMB to blue-colored oxTMB. The thrombin-based aptamer (ssDNA) can be immobilized on the Cu-MOF surface to form a functionalized composite, ssDNA/MOF, and quench the stimulated fluorescence emission and the enzymatic activity of the Cu-MOF. Later, addition of thrombin recovers the fluorescence and enzymatic activity of the MOF. Thus, a turn-on colorimetry/fluorimetry aptasensing probe was designed for the detection of thrombin. Based on colorimetric assay, 350 pM was recorded as the lower limit of detection (LOD), while based on the fluorescence mode, 110 fM was recorded as the LOD (when S/N = 3). The label-free aptasensing probe was used successfully for the detection of thrombin in COVID-19 patients with satisfactory recoveries, 95-98%. Since the detection time of our aptasensor is relatively rapid (45 min) and due to the low-cost precursors and easy-to-operate characteristics, we believe that it has great potential to be used in point-of-care testing (POCT).