Haemorrhagic tracheal necrosis as a lethal complication of an aneurysm model in rabbits via endoluminal incubation with elastase

A modified method of elastase-induced saccular aneurysm creation in rabbits: Schematic representation of the method

BACKGROUND

The purpose of our study was to investigate the safety and effectiveness of a modified technique using a short guiding catheter for instillation of elastase in comparison with the previously described method of creating elastase-induced aneurysm in rabbits.

METHODS

Following right common carotid artery (RCCA) access using an arterial sheath and inflating the Fogarty balloon in the subclavian artery, a short guiding catheter was used for the instillation of the elastase in the experimental group (n = 5) while it was performed with a microcatheter in the control group (n = 5). The procedure duration was recorded from the RCCA puncture to the sheath removal. The histological changes were characterized using H&E and Masson's trichrome (MT) staining.

RESULTS

The procedure time was 23 ± 2 min in the experimental group and 29 ± 2 min in the control group. All the rabbits (100%) in the experimental group survived without neurologic deficits, but two rabbits (40%) survived in the control group. All aneurysms were created in the saccular shape (100%) with a neck size of 2.3 ± 0.29 mm, a width of 2.75 ± 0.36 mm, and height of 6.37 ± 0.46 mm, and a dome to neck ratio of 1.21 ± 0.23. The aneurysm walls were partly thickened due to the degradation of the media tunica and adventitia proliferation with loss of the internal elastic lamina.

CONCLUSION

By using a short guiding catheter, we could instill the elastase in a more effective and safe manner in the creation of the elastase-induced aneurysm model in rabbits.

Imaging of intracranial aneurysms in animals: a systematic review of modalities

Intracranial aneurysm (IA) animal models are paramount to study IA pathophysiology and to test new endovascular treatments. A number of in vivo imaging modalities are available to characterize IAs at different stages of development in these animal models. This review describes existing in vivo imaging techniques used so far to visualize IAs in animal models. We systematically searched for studies containing in vivo imaging of induced IAs in animal models in PubMed and SPIE Digital library databases between 1 January 1945 and 13 July 2022. A total of 170 studies were retrieved and reviewed in detail, and information on the IA animal model, the objective of the study, and the imaging modality used was collected. A variety of methods to surgically construct or endogenously induce IAs in animals were identified, and 88% of the reviewed studies used surgical methods. The large majority of IA imaging in animals was performed for 4 reasons: basic research for IA models, testing of new IA treatment modalities, research on IA in vivo imaging of IAs, and research on IA pathophysiology. Six different imaging techniques were identified: conventional catheter angiography, computed tomography angiography, magnetic resonance angiography, hemodynamic imaging, optical coherence tomography, and fluorescence imaging. This review presents and discusses the advantages and disadvantages of all in vivo IA imaging techniques used in animal models to help future IA studies finding the most appropriate IA imaging modality and animal model to answer their research question.

Anatomical Variations of the Common Carotid Arteries and Neck Structures of the New Zealand White Rabbit and Their Implications for the Development of Preclinical Extracranial Aneurysm Models

BACKGROUND

Rabbit models involving neck arteries are of growing importance for the development of preclinical aneurysm models. An optimal understanding of the anatomy is primordial to allow the conception of models while minimizing mortality and morbidity. The aim of this study is to give reliable anatomical landmarks to allow a standardized approach to the neck vessels.

METHODS

We performed a necropsy on nine specimens from ongoing experimental studies. We measured the distance between the origins of the right and left common carotid artery (rCCA/lCCA) and between the rCCA and the manubrium sterni (MS). The structures at risk were described.

RESULTS

Female New Zealand White rabbits (NZWR) weighing 3.7 ± 0.3 kg and aged 25 ± 5 weeks were included. The rCCA origin was located 9.6 ± 1.2 mm laterally and 10.1 ± 3.3 mm caudally to the MS. In all specimens, the lCCA originated from the aortic arch, together with the brachiocephalic trunk (BCT), and 6.2 ± 3.1 mm proximally to the rCCA origin. The external and internal jugular veins, trachea and laryngeal nerve were the main structures at risk.

CONCLUSIONS

The data help to localize both CCAs and their origin to guide surgical approaches with the manubrium sterni as a main landmark. Special attention has to be paid to the trachea, jugular veins and laryngeal nerves.

Clinical application for DSA combined with a double-chamber Fogarty catheter in the treatment of venous crisis

Introduction

Venous crisis, as a common vascular crisis post limb replantation, is usually treated with surgical exploration.

Aim

To investigate effects of digital subtraction angiography (DSA) combined with double-chamber Fogarty balloon catheter on venous crisis post replantation of limbs.

Material and methods

Twelve patients suffering from severed limbs were involved in this study. Patients underwent DSA combining double-chamber Fogarty balloon catheter operation. Colour Doppler ultrasound was used to diagnose patients with venous crisis. Patients were treated with rehydration, anti-infection, anticoagulation, and vasodilation. Indexes, including total joint active activity, working condition, remaining symptoms, appearance, feeling, and muscle strength, were evaluated.

Results

During operation, the limb was shortened to 0-1 cm in 8 cases, to 1-2 cm in 2 cases, and to 2-2.5 cm in 2 cases. According to DSA findings, popliteal vein thrombosis was formed at 0.6-4.2 cm and was removed from the popliteal vein. After removal of the thrombosis, DSA images showed re-canalization of the popliteal vein. A typical case of a 16-year-old patient underwent limb replantation; however, venous crisis was formed post operation. Postoperative colour Doppler ultrasound findings indicated re-canalization of the popliteal vein. Tibia and fibula were reduced and internally fixed, while the limb was survived post-operation. The degree of swelling of limbs was improved, and skin temperature was normal or 0.6-1.5°C lower than affected limbs. Skin colour was normal and activity was improved. Patients demonstrated sensory recovery grade of S³⁺ and two-point discrimination of 4.5 mm.

Conclusions

DSA combining double-chamber Fogarty balloon catheter, as a minimally invasive and fast approach, could accurately locate thrombi and improve pertinence of vein branches.

The development and understanding of intracranial aneurysm based on rabbit model

In modern society, intracranial aneurysms have seriously affected people's life. To better study and treat intracranial aneurysm, animal models are ideal candidates to perform biological research and preclinical endovascular device testing. Rabbit aneurysm model is one of the most commonly used animal models, and the rabbit aneurysms share similarities in histology, morphology, and hemodynamic aspects with human intracranial aneurysms, which is an ideal model for intracranial aneurysm pre-clinical and basic research. In this review, we will summarize the main methods of establishing rabbit aneurysms model and will further discuss the current biological mechanisms of intracranial aneurysms based on rabbit model. Further improvements of rabbit aneurysm model and more deep studies based on this model are needed to provide new insights into studying and clinical treating intracranial aneurysm.

From bench to bedside: utility of the rabbit elastase aneurysm model in preclinical studies of intracranial aneurysm treatment

Preclinical studies are important in helping practitioners and device developers improve techniques and tools for endovascular treatment of intracranial aneurysms. Thus an understanding of the major animal models used in such studies is important. The New Zealand rabbit elastase induced arterial aneurysm of the common carotid artery is one of the most commonly used models in testing the safety and efficacy of new endovascular devices. In this review we discuss: (1) the various techniques used to create the aneurysm, (2) complications of aneurysm creation, (3) natural history of the arterial aneurysm, (4) histopathologic and hemodynamic features of the aneurysm, (5) devices tested using this model, and (6) weaknesses of the model. We demonstrate how preclinical studies using this model are applied in the treatment of intracranial aneurysms in humans. The model has similar hemodynamic, morphological, and histologic characteristics to human aneurysms, and demonstrates similar healing responses to coiling as human aneurysms. Despite these strengths, however, the model does have many weaknesses, including the fact that the model does not emulate the complex inflammatory processes affecting growing and ruptured aneurysms. Furthermore, the extracranial location of the model affects its ability to be used in preclinical safety assessments of new devices. We conclude that the rabbit elastase model has characteristics that make it a simple and effective model for preclinical studies on the endovascular treatment of intracranial aneurysms, but further work is needed to develop aneurysm models that simulate the histopathologic and morphologic characteristics of growing and ruptured aneurysms.

An improved elastase-based method to create a saccular aneurysm rabbit model

PURPOSE

To find a safe, effective, and simple method to create a rabbit aneurysm model.

METHODS

Twelve adult New Zealand rabbits were divided into two groups: experimental (n = 9) and control (n = 3). The origin of the right external carotid artery was occluded with a temporary aneurysm clip, after which the right external carotid artery was ligated distally. The resulting stump was infused with elastase (experimental group) or saline (control group) for 20 minutes, and the clip was removed. The animals were studied angiographically and sacrificed 3 weeks after the procedure to harvest the aneurysms for histological analysis.

RESULTS

All nine rabbits in the experimental group successfully developed aneurysm after 3 weeks. Aneurysms had an average height of 5.2 ± 1.1 mm and width of 3.5 ± 0.8 mm. Histological analysis showed that the tunica media of the aneurysmal wall was barely identifiable. None of the three rabbits in the control group developed an aneurysm, and instead had achieved closure of the right external carotid artery stump.

CONCLUSIONS

We have established an effective and a simple elastase-based method to create a rabbit aneurysm model. The procedure is easy to perform and does not require an interventional technique and or ligation of the internal carotid artery, which would otherwise reduce the blood supply to the brain.

Development of a new experimental model of saccular aneurysm by intra-arterial incubation of papain in rabbits

INTRODUCTION

Experimental saccular aneurysms can be created with surgical techniques of the arterial wall or by injecting pancreatic elastase. Papain is an enzyme with properties similar to those of elastase, and it has not been tested for this purpose. The objective of this study was to determine whether papain produces saccular aneurysms.

METHODS

Eleven New Zealand white rabbits (1.9-3.0 kg) were divided into two groups: group I (n = 8)-papain, and group II (n = 3)-sham. The animals underwent surgical exposure of the neck; the right common carotid artery was used as the test and the left common carotid artery as the control. On the 21st day after surgery, animals were sacrificed for removal of the arteries, measurements, and histological analysis. We determine formation of aneurysm to occur when the test artery dilated compared to the control.

RESULTS

There was no aneurysm formation in the sham group. The papain group showed aneurysm formation in all cases (100%). The average diameter of the aneurysms was 3.8  ± 1.4 mm and the average length was 16.7  ±  6.0 mm. The histological analysis showed a destruction of the elastic fibers in 100% of cases, mild inflammation in 62.5%, intimal fibrosis in 50%, endothelial injury in 100%, and thrombosis in 100% of cases.

CONCLUSION

Papain was capable of forming aneurysms with histological characteristics similar to those of elastase-induced aneurysms; however, a comparative study is necessary to determine whether the papain is superior to elastase in the production of experimental saccular aneurysms.

In vivo experimental intracranial aneurysm models: a systematic review

Animal models are necessary to develop and test innovations in aneurysm therapy before clinical introduction. This review aims at identifying the most likely candidates for standardizing preclinical testing of aneurysm devices. We systematically searched electronic databases for publications on animal aneurysm models from 1961-2008 to assess the methodologic quality of the studies and collect data on the patency and angiographic and pathologic outcomes of treatments. There has been a steady increase in the annual number of publications with time. Species that were most frequently used were dogs, rabbits, and rodents, followed by swine. Most publications are single-laboratory studies with variables and poorly validated outcome measures, a small number of subjects, and limited standardization of techniques. The most appropriate models to test for recurrences after endovascular occlusion were the surgical bifurcation model in dogs, and the elastase-induced aneurysm model in rabbits. A standardized multicenter study is needed to improve the preclinical evaluation of endovascular devices in aneurysm therapy.

Neck injury is critical to elastase-induced aneurysm model

We modified the elastase-induced aneurysm model by use of a simple surgical technique in rabbits. A temporary arcuated aneurysm clip was placed at the origin of the right common carotid artery (RCCA), ascertaining the inner edge of the clip blade on the juncture of the RCCA and right subclavian artery (RSCA), and the elastase-induced aneurysm procedure was undertaken. We found elastase and location of the temporary arcuated aneurysm clip are critical to the success of this aneurysm model.

Morbidity and mortality associated with creation of elastase-induced saccular aneurysms in a rabbit model

BACKGROUND AND PURPOSE

Elastase-induced aneurysms in rabbits have been proposed as a useful preclinical tool for device development. The object of this study was to report rates of morbidity and mortality associated with the creation and embolization of elastase-induced rabbit aneurysms and to assess the impact of operator experience on these rates.

MATERIALS AND METHODS

Elastase-induced model aneurysms were created in New Zealand white rabbits (n = 700). One neuroradiologist/investigator, naive to the aneurysm-creation procedure at the outset of the experiments, performed all surgeries. All morbidity and deaths related to aneurysm creation (n = 700) and embolization procedures (n = 529) were categorized into acute and chronic deaths. Data were analyzed with single-regression analysis and analysis of variance. To assess the impact of increasing operator experience, we broke the number of animals into 50-animal increments.

RESULTS

There were 121 (17%) deaths among 700 subjects. Among 700 aneurysm-creation procedures, 59 deaths (8.4%) were noted. Among 529 aneurysm-embolization procedures, 43 deaths (8.1%) were noted. Nineteen additional deaths (2.7% of 700 subjects) were unrelated to the procedures. Simple regression-indicated mortality associated with procedures diminished with increasing operator experience (R(2) = 0.38, P = .0180), and that for each 50-rabbit increment mortality was reduced, on average, by 0.6%.

CONCLUSIONS

Mortality rates of approximately 8% are associated with both experimental aneurysm creation and with embolization in the rabbit elastase-induced aneurysm model. Increasing operator experience is inversely correlated with mortality, and the age of the rabbit is positively associated with morbidity.

Neurological deficits associated with the elastase-induced aneurysm model in rabbits

OBJECTIVE

Although the rabbit elastase-induced aneurysm model is currently used widely for endovascular research and device testing, procedural causes leading to animal morbidity and mortality have not yet been clearly described. We conducted a retrospective study to analyse factors contributing to neurological deficits in rabbits that underwent the elastase-induced aneurysm creation procedure at our research center from 2002 to 2005 in order to improve the technique and reduce procedure-related morbidity and mortality.

METHODS

A total sample of 38 animals that underwent the procedure under the same conditions was analysed in two groups: animals that presented neurological deficits (ND, n=15) and animals that were neurological deficit free (NDF, n=23). Data were collected by reviewing the animal records and radiographic images from the procedures. Statistical analyses using the Mann-Whitney test, unpaired t-test with Welch correction and Fisher's exact tests were performed to compare the two groups based on variables associated with endothelial injury and activation of the coagulation cascade.

RESULTS

The variables of animal weight (signifying state of health of the animal), total procedure time, total balloon occlusion time and clot formation were found to be significantly and/or very significantly correlated to ND presentation.

DISCUSSION

Successful creation of the rabbit elastase-induced aneurysm model depends on careful control over several technical details. Important variables governing outcome have been identified here. A specific, improved endovascular arrangement that facilitates maneuvering of the devices and reduces the risk of air emboli is presented.

Modified technique to create morphologically reproducible elastase-induced aneurysms in rabbits

INTRODUCTION

The purpose of this study was to create morphologically reproducible elastase-induced model aneurysms in rabbits.

METHODS

We created 120 elastase-induced aneurysms in rabbits using two different methods: the standard technique (group 1, n=62) and a modified technique (group 2, n=58). In the standard technique a small cutdown with a focal area of exposure of the mid-right common carotid artery (RCCA) was employed, while in the modified technique the RCCA was completely exposed to its origin. We measured aneurysm sizes (neck diameter, width and height) in the two groups. The aneurysm sizes were compared between the two groups using Student's t test, and the standard deviations of the aneurysm sizes were compared between the groups using the F test.

RESULTS

The mean aneurysm neck size, width and height in group 1 were 3.4+/-1.2 mm, 3.8+/-1.0 mm and 8.0+/-1.7 mm, respectively, and in group 2, were 3.2+/-0.9 mm, 3.7+/-0.6 mm and 9.1+/-1.8 mm, respectively. The differences in mean aneurysm neck and width between the two groups were not significant (P>0.05). However, there were significant differences in the standard deviation of these two parameters between the two groups (P<0.05 and P<0.01, respectively). The mean aneurysm height in group 2 was larger than in group 1 (P<0.001), but no significant difference in the standard deviation of this parameter between the two groups was found (P>0.05).

CONCLUSION

The results indicate that more consistent aneurysm diameters can be created using the modified technique.

Treatment of Experimentally Induced Aneurysms with Stents

OBJECTIVE

Although Guglielmi detachable coil systems have been widely accepted for treatment of intracranial aneurysms, primary stenting of aneurysms using porous stents, stent grafts, or implantation of coils after stent placement constitute emerging techniques in endovascular treatment. The aim of the present study was to use an animal model to investigate these different approaches to treat cerebral aneurysms with regard to the rate of closure and the histopathological changes within the aneurysm cavity and the parent vessel after stent placement.

METHODS

We created aneurysms in 30 rabbits by distal ligation and intraluminal incubation of the right common carotid artery with elastase. Ten animals were treated with porous stents alone, 10 animals with stent grafts (covered stents), and 10 animals with stents and additional coiling via the interstices of the stent, which enabled dense packing of the coils. Five animals in each group were observed for 1 month and the other animals for 3 months. Histological analyses were performed, including immunohistochemical investigations for estimating the proliferation of the intima and possible inflammatory infiltration.

RESULTS

Covered stents led to a complete and stable aneurysm occlusion with only minimal proliferative carrier vessel wall changes. One covered stent was completely occluded with old thrombus, and the other 9 remained patent. Porous stents occluded two of five aneurysms in the 1-month follow-up group and four of five after 3 months. However, progressive sprouting of neointima inside the carrier vessel that resulted in a stenosis of up to 40% was present. In the Stent + Coil group, one aneurysm showed recanalization after 1 month, and three of five aneurysms were recanalized after 3 months after coil compaction. Moreover, in-stent stenosis of up to 30% was present.

CONCLUSION

This study demonstrates the possible shortcomings and problems of emerging stent techniques to treat intracerebral aneurysms, shows where technical advances have to be made, and describes in which cases of aneurysm morphology caution has to be exercised when considering an endovascular approach using stents.

Are the configuration and neck morphology of experimental aneurysms predictable? A technical approach

Aneurysm configuration and neck morphology are important factors in the decision for cerebral aneurysm therapy, i.e., clipping versus coiling. The aim of our study was to create various aneurysm configurations in a predictable and reproducible way in an animal model. In our recently proposed endovascular approach to produce bifurcation aneurysms in the rabbit, the right common carotid artery (CCA) is surgically exposed and distally ligated, and a sheath is advanced retrogradely into the CCA, the base of which is proximally occluded using a Fogarty balloon. Subsequently, elastase is injected via a microcatheter that is placed directly distal to the balloon and allowed to incubate for 20 min. After removal of the sheath, saccular aneurysms begin to form within 2 weeks. For greater variability in aneurysm size and neck morphology, we modified two parameters of this formerly established elastase-induced aneurysm model--the distance between the balloon and sheath and the level of balloon position--before the elastase was endoluminally incubated in 15 rabbits. Three weeks after aneurysm induction, the size and configuration of the aneurysms were controlled using DSA. Our results confirm that balloon occlusion in the brachiocephalic trunk results in broad-based aneurysms, whereas balloon occlusion in the CCA gives rise to circumscribed aneurysm necks. By increasing the distance between the balloon and sheath, the rabbits developed significantly larger aneurysms. The balloon-sheath distance and the level of balloon occlusion proved to be parameters whose modifications result in predictable and reproducible aneurysm variants that can be used for the testing of endovascular devices.