The aerobic CO dehydrogenase from Oligotropha carboxidovorans

Enzymatic CO2 reduction catalyzed by natural and artificial Metalloenzymes

The continuously increasing level of atmospheric CO2 in the atmosphere has led to global warming. Converting CO2 into other carbon compounds could mitigate its atmospheric levels and produce valuable products, as CO2 also serves as a plentiful and inexpensive carbon feedstock. However, the inert nature of CO2 poses a major challenge for its reduction. To meet the challenge, nature has evolved metalloenzymes using transition metal ions like Fe, Ni, Mo, and W, as well as electron-transfer partners for their functions. Mimicking these enzymes, artificial metalloenzymes (ArMs) have been designed using alternative protein scaffolds and various metallocofactors like Ni, Co, Re, Rh, and FeS clusters. Both the catalytic efficiency and the scope of CO2-reduction product of these ArMs have been improved over the past decade. This review first focuses on the natural metalloenzymes that directly reduce CO2 by discussing their structures and active sites, as well as the proposed reaction mechanisms. It then introduces the common strategies for electrochemical, photochemical, or photoelectrochemical utilization of these native enzymes for CO2 reduction and highlights the most recent advancements from the past five years. We also summarize principles of protein design for bio-inspired ArMs, comparing them with native enzymatic systems and outlining challenges and opportunities in enzymatic CO2 reduction.

CO Oxidation Mechanism of Silver-Substituted Mo/Cu CO-Dehydrogenase - Analogies and Differences to the Native Enzyme

The aerobic oxidation of carbon monoxide to carbon dioxide is catalysed by the Mo/Cu-containing CO-dehydrogenase enzyme in the soil bacterium Oligotropha carboxidovorans, enabling the organism to grow on the small gas molecule as carbon and energy source. It was shown experimentally that silver can be substituted for copper in the active site of Mo/Cu CODH to yield a functional enzyme. In this study, we employed QM/MM calculations to investigate whether the reaction mechanism of the silver-substituted enzyme is similar to that of the native enzyme. Our results suggest that the Ag-substituted enzyme can oxidize CO and release CO2 following the same reaction steps as the native enzyme, with a computed rate-limiting step of 10.4 kcal/mol, consistent with experimental findings. Surprisingly, lower activation energies for C-O bond formation have been found in the presence of silver. Furthermore, comparison of rate constants for reduction of copper- and silver-containing enzymes suggests a discrepancy in the transition state stabilization upon silver substitution. We also evaluated the effects that differences in the water-active site interaction may exert on the overall energy profile of catalysis. Finally, the formation of a thiocarbonate intermediate along the catalytic pathway was found to be energetically unfavorable for the Ag-substituted enzyme. This finding aligns with the hypothesis proposed for the wild-type form, suggesting that the creation of such species may not be necessary for the enzymatic catalysis of CO oxidation.

Molybdenum-Copper Antagonism In Metalloenzymes And Anti-Copper Therapy

The connection between 3d (Cu) and 4d (Mo) via the "Mo-S-Cu" unit is called Mo-Cu antagonism. Biology offers case studies of such interactions in metalloproteins such as Mo/Cu-CO Dehydrogenases (Mo/Cu-CODH), and Mo/Cu Orange Protein (Mo/Cu-ORP). The CODH significantly maintains the CO level in the atmosphere below the toxic level by converting it to non-toxic CO2 for respiring organisms. Several models were synthesized to understand the structure-function relationship of these native enzymes. However, this interaction was first observed in ruminants, and they convert molybdate (MoO4 2- ) into tetrathiomolybdate (MoS4 2- ; TTM), reacting with cellular Cu to yield biological unavailable Mo/S/Cu cluster, then developing Cu-deficiency diseases. These findings inspire the use of TTM as a Cu-sequester drug, especially for treating Cu-dependent human diseases such as Wilson diseases (WD) and cancer. It is well known that a balanced Cu homeostasis is essential for a wide range of biological processes, but negative consequence leads to cell toxicity. Therefore, this review aims to connect the Mo-Cu antagonism in metalloproteins and anti-copper therapy.

Current status of carbon monoxide dehydrogenases (CODH) and their potential for electrochemical applications

Anthropogenic carbon dioxide (CO2) levels are rising to alarming concentrations in earth's atmosphere, causing adverse effects and global climate changes. In the last century, innovative research on CO2 reduction using chemical, photochemical, electrochemical and enzymatic approaches has been addressed. In particular, natural CO2 conversion serves as a model for many processes and extensive studies on microbes and enzymes regarding redox reactions involving CO2 have already been conducted. In this review we focus on the enzymatic conversion of CO2 to carbon monoxide (CO) as the chemical conversion downstream of CO production render CO particularly attractive as a key intermediate. We briefly discuss the different currently known natural autotrophic CO2 fixation pathways, focusing on the reversible reaction of CO2, two electrons and protons to CO and water, catalyzed by carbon monoxide dehydrogenases (CODHs). We then move on to classify the different type of CODHs, involved catalyzed chemical reactions and coupled metabolisms. Finally, we discuss applications of CODH enzymes in photochemical and electrochemical cells to harness CO2 from the environment transforming it into commodity chemicals.

Combining [MoVIO3] and [M0(CO)3] (M = Mo, Cr) Fragments within the Same Complex: Synthesis and Reactivity of the Single Oxo-Bridged Heterobimetallics Supported by Xanthene-Based Heterodinucleating Ligands

A functional model of Mo-Cu carbon monoxide dehydrogenase (CODH) enzyme requires the presence of an oxidant (metal-oxo) and a metal-bound carbonyl in close proximity. In this work, we report the synthesis, characterization, and reactivity of a heterobimetallic complex combining Mo(VI) trioxo with Mo(0) tricarbonyl. The formation of the heterobimetallic complex is facilitated by the xanthene-bridged heterodinucleating ligand containing a hard catecholate chelate and a soft iminopyridine chelate. A catechol-coordinated square-pyramidal [MoVIO3] fragment interacts directly with the iminopyridine-bound [Mo0(CO)3] fragment via a single (oxo) bridge, with the overall disposition being related to the proposed first step in the CODH mechanism, where square-pyramidal [MoVIO2S] interacts with the [Cu-CO] via a single sulfido bridge. Our attempt to obtain a sulfido-bridged analogue (using [MoO3S]2- precursor) led to a mixture of products possibly containing different (oxo and sulfido) bridges. Despite a direct interaction between Mo(VI) and Mo(0) segments, no internal redox is observed, with the high lying occupied MOs being mostly d-π orbitals at Mo0(CO)3 and the low lying unoccupied MOs being d-π orbitals at MoVIO3. Due to the overall rigid structure, the heterobimetallic complex was found to be stable up to 100 °C in DMF-d7 (based on 1H NMR). The decomposition of the complex above this temperature does not produce CO2 (based on gas chromatography), dissociating stable Mo(CO)3(DMF)3 instead (based on IR). We also synthesized and studied the reactivity of the Mo(VI)/Cr(0) analogue. While this complex demonstrated more facile decomposition, no CO2 production was observed. Density functional theory calculations suggest that the formation of [CO2]2- and its subsequent reductive elimination is endergonic in the present system, likely due to the stability of fac-Mo0(CO)3 and the relative nucleophilic character of the carbonyl carbon engendered by back donation from Mo(0). The calculations also indicate that the replacement of one oxo by sulfido (both terminal and bridging), replacement of catechol with dithiolene, and replacement of Mo(0) with Cr(0) does not affect significantly the energetics of the process, likely requiring the use a less stable and less π-basic CO anchor.

Studies Relevant to the Functional Model of Mo-Cu CODH: In Situ Reactions of Cu(I)-L Complexes with Mo(VI) and Synthesis of Stable Structurally Characterized Heterotetranuclear MoVI2CuI2 Complex

In this study, we report the synthesis, characterization, and reactions of Cu(I) complexes of the general form Cu(L)(LigH₂) (LigH₂ = xanthene-based heterodinucleating ligand (E)-3-(((5-(bis(pyridin-2-ylmethyl)amino)-2,7-di-tert-butyl-9,9-dimethyl-9H-xanthen-4-yl)imino)methyl)benzene-1,2-diol); L = PMe₃, PPh₃, CN(2,6-Me₂C₆H₃)). New complexes [Cu(PMe₃)(LigH₂)] and [CuCN(2,6-Me₂C₆H₃)(LigH₂)] were synthesized by treating [Cu(LigH₂)](PF₆) with trimethylphosphine and 2,6-dimethylphenyl isocyanide, respectively. These complexes were characterized by multinuclear NMR spectroscopy, IR spectroscopy, high-resolution mass spectrometry (HRMS), and X-ray crystallography. In contrast, attempted reactions of [Cu(LigH₂)](PF₆) with cyanide or styrene failed to produce isolable crystalline products. Next, the reactivity of these and previously synthesized Cu(I) phosphine and isocyanide complexes with molybdate was interrogated. IR (for isocyanide) and ³¹P NMR (for PPh₃/PMe₃) spectroscopy demonstrates the lack of oxidation reactivity. We also describe herein the first example of a structurally characterized multinuclear complex combining both Mo(VI) and Cu(I) metal ions within the same system. The heterobimetallic tetranuclear complex [Cu₂Mo₂O₄(μ₂-O)(Lig)₂]·HOSiPh₃ was obtained by the reaction of the silylated Mo(VI) precursor (Et₄N)(MoO₃(OSiPh₃)) with LigH₂, followed by the addition of [Cu(NCMe)₄](PF₆). This complex was characterized by NMR spectroscopy, high-resolution mass spectrometry, and X-ray crystallography.

Functional characterization and taxonomic classification of novel gammaproteobacterial diversity in sponges

Sponges harbour exceptionally diverse microbial communities, whose members are largely uncultured. The class Gammaproteobacteria often dominates the microbial communities of various sponge species, but most of its diversity remains functional and taxonomically uncharacterised. Here we reconstructed and characterised 32 metagenome-assembled genomes (MAGs) derived from three sponge species. These MAGs represent ten novel species and belong to seven orders, of which one is new. We propose nomenclature for all these taxa. These new species comprise sponge-specific bacteria with varying levels of host specificity. Functional gene profiling highlights significant differences in metabolic capabilities across the ten species, though each also often exhibited a large degree of metabolic diversity involving various nitrogen- and sulfur-based compounds. The genomic features of the ten species suggest they have evolved to form symbiotic interaction with their hosts or are well-adapted to survive within the sponge environment. These Gammaproteobacteria are proposed to scavenge substrates from the host environment, including metabolites or cellular components of the sponge. Their diverse metabolic capabilities may allow for efficient cycling of organic matter in the sponge environment, potentially to the benefit of the host and other symbionts.

Bioelectrocatalytic CO2 Reduction by Redox Polymer-Wired Carbon Monoxide Dehydrogenase Gas Diffusion Electrodes

The development of electrodes for efficient CO₂ reduction while forming valuable compounds is critical. The use of enzymes as catalysts provides the advantage of high catalytic activity in combination with highly selective transformations. We describe the electrical wiring of a carbon monoxide dehydrogenase II from Carboxydothermus hydrogenoformans (ChCODH II) using a cobaltocene-based low-potential redox polymer for the selective reduction of CO₂ to CO over gas diffusion electrodes. High catalytic current densities of up to -5.5 mA cm^-2 are achieved, exceeding the performance of previously reported bioelectrodes for CO₂ reduction based on either carbon monoxide dehydrogenases or formate dehydrogenases. The proposed bioelectrode reveals considerable stability with a half-life of more than 20 h of continuous operation. Product quantification using gas chromatography confirmed the selective transformation of CO₂ into CO without any parasitic co-reactions at the applied potentials.

Second and Outer Coordination Sphere Effects in Nitrogenase, Hydrogenase, Formate Dehydrogenase, and CO Dehydrogenase

Gases like H2, N2, CO2, and CO are increasingly recognized as critical feedstock in "green" energy conversion and as sources of nitrogen and carbon for the agricultural and chemical sectors. However, the industrial transformation of N2, CO2, and CO and the production of H2 require significant energy input, which renders processes like steam reforming and the Haber-Bosch reaction economically and environmentally unviable. Nature, on the other hand, performs similar tasks efficiently at ambient temperature and pressure, exploiting gas-processing metalloenzymes (GPMs) that bind low-valent metal cofactors based on iron, nickel, molybdenum, tungsten, and sulfur. Such systems are studied to understand the biocatalytic principles of gas conversion including N2 fixation by nitrogenase and H2 production by hydrogenase as well as CO2 and CO conversion by formate dehydrogenase, carbon monoxide dehydrogenase, and nitrogenase. In this review, we emphasize the importance of the cofactor/protein interface, discussing how second and outer coordination sphere effects determine, modulate, and optimize the catalytic activity of GPMs. These may comprise ionic interactions in the second coordination sphere that shape the electron density distribution across the cofactor, hydrogen bonding changes, and allosteric effects. In the outer coordination sphere, proton transfer and electron transfer are discussed, alongside the role of hydrophobic substrate channels and protein structural changes. Combining the information gained from structural biology, enzyme kinetics, and various spectroscopic techniques, we aim toward a comprehensive understanding of catalysis beyond the first coordination sphere.

Can water act as a nucleophile in CO oxidation catalysed by Mo/Cu CO-dehydrogenase? Answers from theory

The aerobic CO dehydrogenase from Oligotropha carboxidovorans is an environmentally crucial bacterial enzyme for maintenance of subtoxic concentration of CO in the lower atmosphere, as it allows for the oxidation of CO to CO₂ which takes place at its Mo−Cu heterobimetallic active site. Despite extensive experimental and theoretical efforts, significant uncertainties still concern the reaction mechanism for the CO oxidation. In this work, we used the hybrid quantum mechanical/molecular mechanical approach to evaluate whether a water molecule present in the active site might act as a nucleophile upon formation of the new C−O bond, a hypothesis recently suggested in the literature. Our study shows that activation of H₂O can be favoured by the presence of the Mo=O_eq group. However, overall our results suggest that mechanisms other than the nucleophilic attack by Mo=O_eq to the activated carbon of the CO substrate are not likely to constitute reactive channels for the oxidation of CO by the enzyme.

Electrochemical Studies of CO2 -Reducing Metalloenzymes

Only two enzymes are capable of directly reducing CO₂ : CO dehydrogenase, which produces CO at a [NiFe₄ S₄ ] active site, and formate dehydrogenase, which produces formate at a mononuclear W or Mo active site. Both metalloenzymes are very rapid, energy-efficient and specific in terms of product. They have been connected to electrodes with two different objectives. A series of studies used protein film electrochemistry to learn about different aspects of the mechanism of these enzymes (reactivity with substrates, inhibitors…). Another series focused on taking advantage of the catalytic performance of these enzymes to build biotechnological devices, from CO₂ -reducing electrodes to full photochemical devices performing artificial photosynthesis. Here, we review all these works.

Exploiting Aerobic Carboxydotrophic Bacteria for Industrial Biotechnology

Aerobic carboxydotrophic bacteria are a group of microorganisms which possess the unique trait to oxidize carbon monoxide (CO) as sole energy source with molecular oxygen (O₂) to produce carbon dioxide (CO₂) which subsequently is used for biomass formation via the Calvin-Benson-Bassham cycle. Moreover, most carboxydotrophs are also able to oxidize hydrogen (H₂) with hydrogenases to drive the reduction of carbon dioxide in the absence of CO. As several abundant industrial off-gases contain significant amounts of CO, CO₂, H₂ as well as O₂, these bacteria come into focus for industrial application to produce chemicals and fuels from such gases in gas fermentation approaches. Since the group of carboxydotrophic bacteria is rather unknown and not very well investigated, we will provide an overview about their lifestyle and the underlying metabolic characteristics, introduce promising members for industrial application, and give an overview of available genetic engineering tools. We will point to limitations and discuss challenges, which have to be overcome to apply metabolic engineering approaches and to utilize aerobic carboxydotrophs in the industrial environment.

Sulfide and transition metals - A partnership for life

Sulfide and transition metals often came together in Biology. The variety of possible structural combinations enabled living organisms to evolve an array of highly versatile metal-sulfide centers to fulfill different physiological roles. The ubiquitous iron‑sulfur centers, with their structural, redox, and functional diversity, are certainly the best-known partners, but other metal-sulfide centers, involving copper, nickel, molybdenum or tungsten, are equally crucial for Life. This review provides a concise overview of the exclusive sulfide properties as a metal ligand, with emphasis on the structural aspects and biosynthesis. Sulfide as catalyst and as a substrate is discussed. Different enzymes are considered, including xanthine oxidase, formate dehydrogenases, nitrogenases and carbon monoxide dehydrogenases. The sulfide effect on the activity and function of iron‑sulfur, heme and zinc proteins is also addressed.

Bimetallic Mn, Fe, Co, and Ni Sites in a Four-Helix Bundle Protein: Metal Binding, Structure, and Peroxide Activation

Bimetallic active sites in enzymes catalyze small-molecule conversions that are among the top 10 challenges in chemistry. As different metal cofactors are typically incorporated in varying protein scaffolds, it is demanding to disentangle the individual contributions of the metal and the protein matrix to the activity. Here, we compared the structure, properties, and hydrogen peroxide reactivity of four homobimetallic cofactors (Mn(II)₂, Fe(II)₂, Co(II)₂, Ni(II)₂) that were reconstituted into a four-helix bundle protein. Reconstituted proteins were studied in solution and in crystals. All metals bind with high affinity and yield similar cofactor structures. Cofactor variants react with H₂O₂ but differ in their turnover rates, accumulated oxidation states, and trapped peroxide-bound intermediates. Varying the metal composition thus creates opportunities to tune the reactivity of the bimetallic cofactor and to study and functionalize reactive species.

Genomic Insights into the Ecological Role and Evolution of a Novel Thermoplasmata Order, "Candidatus Sysuiplasmatales"

Recent omics studies have provided invaluable insights into the metabolic potential, adaptation, and evolution of novel archaeal lineages from a variety of extreme environments. We utilized a genome-resolved metagenomic approach to recover eight medium- to high-quality metagenome-assembled genomes (MAGs) that likely represent a new order ("Candidatus Sysuiplasmatales") in the class Thermoplasmata from mine tailings and acid mine drainage (AMD) sediments sampled from two copper mines in South China. 16S rRNA gene-based analyses revealed a narrow habitat range for these uncultured archaea limited to AMD and hot spring-related environments. Metabolic reconstruction indicated a facultatively anaerobic heterotrophic lifestyle. This may allow the archaea to adapt to oxygen fluctuations and is thus in marked contrast to the majority of lineages in the domain Archaea, which typically show obligately anaerobic metabolisms. Notably, "Ca. Sysuiplasmatales" could conserve energy through degradation of fatty acids, amino acid metabolism, and oxidation of reduced inorganic sulfur compounds (RISCs), suggesting that they may contribute to acid generation in the extreme mine environments. Unlike the closely related orders Methanomassiliicoccales and "Candidatus Gimiplasmatales," "Ca. Sysuiplasmatales" lacks the capacity to perform methanogenesis and carbon fixation. Ancestral state reconstruction indicated that "Ca. Sysuiplasmatales," the closely related orders Methanomassiliicoccales and "Ca. Gimiplasmatales," and the orders SG8-5 and RBG-16-68-12 originated from a facultatively anaerobic ancestor capable of carbon fixation via the bacterial-type H₄F Wood-Ljungdahl pathway (WLP). Their metabolic divergence might be attributed to different evolutionary paths. IMPORTANCE A wide array of archaea populate Earth's extreme environments; therefore, they may play important roles in mediating biogeochemical processes such as iron and sulfur cycling. However, our knowledge of archaeal biology and evolution is still limited, since the majority of the archaeal diversity is uncultured. For instance, most order-level lineages except Thermoplasmatales, Aciduliprofundales, and Methanomassiliicoccales within Thermoplasmata do not have cultured representatives. Here, we report the discovery and genomic characterization of a novel order, "Ca. Sysuiplasmatales," within Thermoplasmata in extremely acidic mine environments. "Ca. Sysuiplasmatales" are inferred to be facultatively anaerobic heterotrophs and likely contribute to acid generation through the oxidation of RISCs. The physiological divergence between "Ca. Sysuiplasmatales" and closely related Thermoplasmata lineages may be attributed to different evolutionary paths. These results expand our knowledge of archaea in the extreme mine ecosystem.

Synthesis and Cu(I)/Mo(VI) Reactivity of a Bifunctional Heterodinucleating Ligand on a Xanthene Platform

In an effort to probe the feasibility of a model of Mo-Cu CODH (CODH = carbon monoxide dehydrogenase) lacking a bridging sulfido group, the new heterodinucleating ligand LH₂ was designed and its Cu(I)/Mo(VI) reactivity was investigated. LH₂ ((E)-3-(((5-(bis(pyridin-2-ylmethyl)amino)-2,7-di-tert-butyl-9,9-dimethyl-9H-xanthen-4-yl)imino)methyl)benzene-1,2-diol) features two different chelating positions bridged by a xanthene linker: bis(pyridyl)amine for Cu(I) and catecholate for Mo(VI). LH₂ was synthesized via the initial protection of one of the amine positions, followed by two consecutive alkylations of the second position, deprotection, and condensation to attach the catechol functionality. LH₂ was found to exhibit dynamic cooperativity between two reactive sites mediated by H-bonding of the catechol protons. In the free ligand, catechol protons exhibit H-bonding with imine (intramolecular) and with pyridine (intermolecular in the solid state). The reaction of LH₂ with [Cu(NCMe)₄]⁺ led to the tetradentate coordination of Cu(I) via all nitrogen donors of the ligand, including the imine. Cu(I) complexes were characterized by multinuclear NMR spectroscopy, high-resolution mass spectrometry (HRMS), X-ray crystallography, and DFT calculations. Cu(I) coordination to the imine disrupted H-bonding and caused rotation away from the catechol arm. The reaction of the Cu(I) complex [Cu(LH₂)]⁺ with a variety of monodentate ligands X (PPh₃, Cl^-, SCN^-, CN^-) released the metal from coordination to the imine, thereby restoring imine H-bonding with the catechol proton. The second catechol proton engages in H-bonding with Cu-X (X = Cl, CN, SCN), which can be intermolecular (XRD) or intramolecular (DFT). The reaction of LH₂ with molybdate [MoO₄]^2- led to incorporation of [Mo^VIO₃] at the catecholate position, producing [MoO₃(L)]^2-. Similarly, the reaction of [Cu(LH₂)]⁺ with [MoO₄]^2- formed the heterodinuclear complex [CuMoO₃(L)]^-. Both complexes were characterized by multinuclear NMR, UV-vis, and HRMS. HRMS in both cases confirmed the constitution of the complexes, containing molecular ions with the expected isotopic distribution.

Bacteria and Metabolic Potential in Karst Caves Revealed by Intensive Bacterial Cultivation and Genome Assembly

Karst caves are widely distributed subsurface systems, and the microbiomes therein are proposed to be the driving force for cave evolution and biogeochemical cycling. In past years, culture-independent studies on the microbiomes of cave systems have been conducted, yet intensive microbial cultivation is still needed to validate the sequence-derived hypothesis and to disclose the microbial functions in cave ecosystems. In this study, the microbiomes of two karst caves in Guizhou Province in southwest China were examined. A total of 3,562 bacterial strains were cultivated from rock, water, and sediment samples, and 329 species (including 14 newly described species) of 102 genera were found. We created a cave bacterial genome collection of 218 bacterial genomes from a karst cave microbiome through the extraction of 204 database-derived genomes and de novo sequencing of 14 new bacterial genomes. The cultivated genome collection obtained in this study and the metagenome data from previous studies were used to investigate the bacterial metabolism and potential involvement in the carbon, nitrogen, and sulfur biogeochemical cycles in the cave ecosystem. New N₂-fixing Azospirillum and alkane-oxidizing Oleomonas species were documented in the karst cave microbiome. Two pcaIJ clusters of the β-ketoadipate pathway that were abundant in both the cultivated microbiomes and the metagenomic data were identified, and their representatives from the cultivated bacterial genomes were functionally demonstrated. This large-scale cultivation of a cave microbiome represents the most intensive collection of cave bacterial resources to date and provides valuable information and diverse microbial resources for future cave biogeochemical research.IMPORTANCE Karst caves are oligotrophic environments that are dark and humid and have a relatively stable annual temperature. The diversity of bacteria and their metabolisms are crucial for understanding the biogeochemical cycling in cave ecosystems. We integrated large-scale bacterial cultivation with metagenomic data mining to explore the compositions and metabolisms of the microbiomes in two karst cave systems. Our results reveal the presence of a highly diversified cave bacterial community, and 14 new bacterial species were described and their genomes sequenced. In this study, we obtained the most intensive collection of cultivated microbial resources from karst caves to date and predicted the various important routes for the biogeochemical cycling of elements in cave ecosystems.

Molybdenum-Containing Metalloenzymes and Synthetic Catalysts for Conversion of Small Molecules

The energy deficiency and environmental problems have motivated researchers to develop energy conversion systems into a sustainable pathway, and the development of catalysts holds the center of the research endeavors. Natural catalysts such as metalloenzymes have maintained energy cycles on Earth, thus proving themselves the optimal catalysts. In the previous research results, the structural and functional analogs of enzymes and nano-sized electrocatalysts have shown promising activities in energy conversion reactions. Mo ion plays essential roles in natural and artificial catalysts, and the unique electrochemical properties render its versatile utilization as an electrocatalyst. In this review paper, we show the current understandings of the Mo-enzyme active sites and the recent advances in the synthesis of Mo-catalysts aiming for high-performing catalysts.

First-Principles Calculations on Ni,Fe-Containing Carbon Monoxide Dehydrogenases Reveal Key Stereoelectronic Features for Binding and Release of CO2 to/from the C-Cluster

In view of the depletion of fossil fuel reserves and climatic effects of greenhouse gas emissions, Ni,Fe-containing carbon monoxide dehydrogenase (Ni-CODH) enzymes have attracted increasing interest in recent years for their capability to selectively catalyze the reversible reduction of CO₂ to CO (CO₂ + 2H⁺ + 2e^– CO + H₂O). The possibility of converting the greenhouse gas CO₂ into useful materials that can be used as synthetic building blocks or, remarkably, as carbon fuels makes Ni-CODH a very promising target for reverse-engineering studies. In this context, in order to provide insights into the chemical principles underlying the biological catalysis of CO₂ activation and reduction, quantum mechanics calculations have been carried out in the framework of density functional theory (DFT) on different-sized models of the Ni-CODH active site. With the aim of uncovering which stereoelectronic properties of the active site (known as the C-cluster) are crucial for the efficient binding and release of CO₂, different coordination modes of CO₂ to different forms and redox states of the C-cluster have been investigated. The results obtained from this study highlight the key role of the protein environment in tuning the reactivity and the geometry of the C-cluster. In particular, the protonation state of His93 is found to be crucial for promoting the binding or the dissociation of CO₂. The oxidation state of the C-cluster is also shown to be critical. CO₂ binds to C_red2 according to a dissociative mechanism (i.e., CO₂ binds to the C-cluster after the release of possible ligands from Fe_u) when His93 is doubly protonated. CO₂ can also bind noncatalytically to C_red1 according to an associative mechanism (i.e., CO₂ binding is preceded by the binding of H₂O to Fe_u). Conversely, CO₂ dissociates when His93 is singly protonated and the C-cluster is oxidized at least to the C_int redox state.

Density functional theory was used to investigate Ni,Fe-containing carbon monoxide dehydrogenase enzymes. Different coordination modes of the substrate CO₂ to several forms and redox states of the C-cluster—the enzyme active site—were considered. The obtained results highlight the key role of the protein environment in tuning the reactivity and the geometry of the C-cluster. This helps to uncover which stereoelectronic properties of the active site are crucial for the efficient binding and release of CO₂.

Lipid A from Oligotropha carboxidovorans Lipopolysaccharide That Contains Two Galacturonic Acid Residues in the Backbone and Malic Acid A Tertiary Acyl Substituent

The free-living Gram-negative bacterium Oligotropha carboxidovorans (formerly: Pseudomonas carboxydovorans), isolated from wastewater, is able to live in aerobic and, facultatively, in autotrophic conditions, utilizing carbon monoxide or hydrogen as a source of energy. The structure of O. carboxidovorans lipid A, a hydrophobic part of lipopolysaccharide, was studied using NMR spectroscopy and high-resolution mass spectrometry (MALDI-ToF MS) techniques. It was demonstrated that the lipid A backbone is composed of two d-GlcpN3N residues connected by a β-(1→6) glycosidic linkage, substituted by galacturonic acids (d-GalpA) at C-1 and C-4’ positions. Both diaminosugars are symmetrically substituted by 3-hydroxy fatty acids (12:0(3-OH) and 18:0(3-OH)). Ester-linked secondary acyl residues (i.e., 18:0, and 26:0(25-OH) and a small amount of 28:0(27-OH)) are located in the distal part of lipid A. These very long-chain hydroxylated fatty acids (VLCFAs) were found to be almost totally esterified at the (ω-1)-OH position with malic acid. Similarities between the lipid A of O. carboxidovorans and Mesorhizobium loti, Rhizobium leguminosarum, Caulobacter crescentus as well as Aquifex pyrophylus were observed and discussed from the perspective of the genomic context of these bacteria.

Heavy chalcogenide-transition metal clusters as coordination polymer nodes

While metal-oxygen clusters are widely used as secondary building units in the construction of coordination polymers or metal-organic frameworks, multimetallic nodes with heavier chalcogenide atoms (S, Se, and Te) are comparatively untapped. The lower electronegativity of heavy chalcogenides means that transition metal clusters of these elements generally exhibit enhanced coupling, delocalization, and redox-flexibility. Leveraging these features in coordination polymers provides these materials with extraordinary properties in catalysis, conductivity, magnetism, and photoactivity. In this perspective, we summarize common transition metal heavy chalcogenide building blocks including polynuclear metal nodes with organothiolate/selenolate or anionic heavy chalcogenide atoms. Based on recent discoveries, we also outline potential challenges and opportunities for applications in this field.

A W/Cu Synthetic Model for the Mo/Cu Cofactor of Aerobic CODH Indicates That Biochemical CO Oxidation Requires a Frustrated Lewis Acid/Base Pair

Constructing synthetic models of the Mo/Cu active site of aerobic carbon monoxide dehydrogenase (CODH) has been a long-standing synthetic challenge thought to be crucial for understanding how atmospheric concentrations of CO and CO₂ are regulated in the global carbon cycle by chemolithoautotrophic bacteria and archaea. Here we report a W/Cu complex that is among the closest synthetic mimics constructed to date, enabled by a silyl protection/deprotection strategy that provided access to a kinetically stabilized complex with mixed O^2-/S^2- ligation between (bdt)(O)W^VI and Cu^I(NHC) (bdt = benzene dithiolate, NHC = N-heterocyclic carbene) sites. Differences between the inorganic core's structural and electronic features outside the protein environment relative to the native CODH cofactor point to a biochemical CO oxidation mechanism that requires a strained active site geometry, with Lewis acid/base frustration enforced by the protein secondary structure. This new mechanistic insight has the potential to inform synthetic design strategies for multimetallic energy storage catalysts.

Genetic Engineering of Oligotropha carboxidovorans Strain OM5-A Promising Candidate for the Aerobic Utilization of Synthesis Gas

Due to climate change and worldwide pollution, development of highly sustainable routes for industrial production of basic and specialty chemicals is critical nowadays. One possible approach is the use of CO₂- and CO-utilizing microorganisms in biotechnological processes to produce value-added compounds from synthesis gas (mixtures of CO₂, CO, and H₂) or from C1-containing industrial waste gases. Such syngas fermentation processes have already been established, e.g., biofuel production using strictly anaerobic acetogenic bacteria. However, aerobic processes may be favorable for the formation of more costly (ATP-intensive) products. Oligotropha carboxidovorans strain OM5 is an aerobic carboxidotrophic bacterium and potentially a promising candidate for such processes. We here performed RNA-Seq analysis comparing cells of this organism grown heterotrophically with acetate or autotrophically with CO₂, CO, and H₂ as carbon and energy source and found a variety of chromosomally and of native plasmid-encoded genes to be highly differentially expressed. In particular, genes and gene clusters encoding proteins required for autotrophic growth (CO₂ fixation via Calvin-Benson-Bassham cycle), for CO metabolism (CO dehydrogenase), and for H₂ utilization (hydrogenase), all located on megaplasmid pHCG3, were much higher expressed during autotrophic growth with synthesis gas. Furthermore, we successfully established reproducible transformation of O. carboxidovorans via electroporation and developed gene deletion and gene exchange protocols via two-step recombination, enabling inducible and stable expression of heterologous genes as well as construction of defined mutants of this organism. Thus, this study marks an important step toward metabolic engineering of O. carboxidovorans and effective utilization of C1-containing gases with this organism.

Carbon monoxide-dependent transcriptional changes in a thermophilic, carbon monoxide-utilizing, hydrogen-evolving bacterium Calderihabitans maritimus KKC1 revealed by transcriptomic analysis

Calderihabitans maritimus KKC1 is a thermophilic, carbon monoxide (CO)-utilizing, hydrogen-evolving bacterium that harbors seven cooS genes for anaerobic CO dehydrogenases and six hyd genes for [NiFe] hydrogenases and capable of using a variety of electron acceptors coupled to CO oxidation. To understand the relationships among these unique features and the transcriptional adaptation of the organism to CO, we performed a transcriptome analysis of C. maritimus KKC1 grown under 100% CO and N₂ conditions. Of its 3114 genes, 58 and 32 genes were significantly upregulated and downregulated in the presence of CO, respectively. A cooS–ech gene cluster, an “orphan” cooS gene, and bidirectional hyd genes were upregulated under CO, whereas hydrogen-uptake hyd genes were downregulated. Transcriptional changes in anaerobic respiratory genes supported the broad usage of electron acceptors in C. maritimus KKC1 under CO metabolism. Overall, the majority of the differentially expressed genes were oxidoreductase-like genes, suggesting metabolic adaptation to the cellular redox change upon CO oxidation. Moreover, our results suggest a transcriptional response mechanism to CO that involves multiple transcription factors, as well as a CO-responsive transcriptional activator (CooA). Our findings shed light on the diverse mechanisms for transcriptional and metabolic adaptations to CO in CO-utilizing and hydrogen-evolving bacteria.

Bacterial catabolism of nicotine: Catabolic strains, pathways and modules

Nicotine, the major alkaloid in tobacco, is a toxic, carcinogenic, and addictive compound. In recent years, nicotine catabolism in prokaryotes, including the catabolic pathways for its degradation and the catabolic genes that encode the enzymes of these pathways, have been systemically investigated. In this review, the three known pathways for nicotine catabolism in bacteria are summarized: the pyridine pathway, the pyrrolidine pathway, and a variation of the pyridine and pyrrolidine pathway (VPP pathway). The three nicotine catabolic pathways appear to have evolved separately in three distantly related lineages of bacteria. However, the general mechanism for the breakdown of the nicotine molecule in all three pathways is conserved and can be divided into six major enzymatic steps or catabolic modules that involve hydroxylation of the pyridine ring, dehydrogenation of the pyrrolidine ring, cleavage of the side chain, cleavage of the pyridine ring, dehydrogenation of the side chain, and deamination of pyridine ring-lysis products. In addition to summarizing our current understanding of nicotine degradation pathways, we identified several potential nicotine-degrading bacteria whose genome sequences are in public databases by comparing the sequences of conserved catabolic enzymes. Finally, several uncharacterized genes that are colocalized with nicotine degradation genes and are likely to be involved in nicotine catabolism, including regulatory genes, methyl-accepting chemotaxis protein genes, transporter genes, and cofactor genes are discussed. This review provides a comprehensive overview of the catabolism of nicotine in prokaryotes and highlights aspects of the process that still require additional research.

Anaerobic and hydrogenogenic carbon monoxide-oxidizing prokaryotes: Versatile microbial conversion of a toxic gas into an available energy

Carbon monoxide (CO) is a gas that is toxic to various organisms including humans and even microbes; however, it has low redox potential, which can fuel certain microbes, namely, CO oxidizers. Hydrogenogenic CO oxidizers utilize an energy conservation system via a CO dehydrogenase/energy-converting hydrogenase complex to produce hydrogen gas, a zero emission fuel, by CO oxidation coupled with proton reduction. Biochemical and molecular biological studies using a few model organisms have revealed their enzymatic reactions and transcriptional response mechanisms using CO. Biotechnological studies for CO-dependent hydrogen production have also been carried out with these model organisms. In this chapter, we review recent advances in the studies of these microbes, which reveal their unique and versatile metabolic profiles and provides future perspectives on ecological roles and biotechnological applications. Over the past decade, the number of isolates has doubled (37 isolates in 5 phyla, 20 genera, and 32 species). Some of the recently isolated ones show broad specificity to electron acceptors. Moreover, accumulating genomic information predicts their unique physiologies and reveals their phylogenomic relationships with novel potential hydrogenogenic CO oxidizers. Combined with genomic database surveys, a molecular ecological study has unveiled the wide distribution and low abundance of these microbes. Finally, recent biotechnological applications of hydrogenogenic CO oxidizers have been achieved via diverse approaches (e.g., metabolic engineering and co-cultivation), and the identification of thermophilic facultative anaerobic CO oxidizers will promote industrial applications as oxygen-tolerant biocatalysts for efficient hydrogen production by genomic engineering.

Theoretical Insights into the Aerobic Hydrogenase Activity of Molybdenum–Copper CO Dehydrogenase

The Mo/Cu-dependent CO dehydrogenase from O. carboxydovorans is an enzyme that is able to catalyse CO oxidation to CO 2 ; moreover, it also expresses hydrogenase activity, as it is able to oxidize H 2 . Here, we have studied the dihydrogen oxidation catalysis by this enzyme using QM/MM calculations. Our results indicate that the equatorial oxo ligand of Mo is the best suited base for catalysis. Moreover, extraction of the first proton from H 2 by means of this basic centre leads to the formation of a Mo–OH–Cu I H hydride that allows for the stabilization of the copper hydride, otherwise known to be very unstable. In light of our results, two mechanisms for the hydrogenase activity of the enzyme are proposed. The first reactive channel depends on protonation of the sulphur atom of a Cu-bound cysteine residues, which appears to favour the binding and activation of the substrate. The second reactive channel involves a frustrated Lewis pair, formed by the equatorial oxo group bound to Mo and by the copper centre. In this case, no binding of the hydrogen molecule to the Cu center is observed but once H 2 enters into the active site, it can be split following a low-energy path.

Exploiting Hydrogenophaga pseudoflava for aerobic syngas-based production of chemicals

Gasification is a suitable technology to generate energy-rich synthesis gas (syngas) from biomass or waste streams, which can be utilized in bacterial fermentation processes for the production of chemicals and fuels. Established microbial processes currently rely on acetogenic bacteria which perform an energetically inefficient anaerobic CO oxidation and acetogenesis potentially hampering the biosynthesis of complex and ATP-intensive products. Since aerobic oxidation of CO is energetically more favorable, we exploit in this study the Gram-negative β-proteobacterium Hydrogenophaga pseudoflava DSM1084 as novel host for the production of chemicals from syngas. We sequenced and annotated the genome of H. pseudoflava and established a genetic engineering toolbox, which allows markerless chromosomal modification via the pk19mobsacB system and heterologous gene expression on pBBRMCS2-based plasmids. The toolbox was extended by identifying strong endogenous promotors such as P_gapA2 which proved to yield high expression under heterotrophic and autotrophic conditions. H. pseudoflava showed relatively fast heterotrophic growth in complex and minimal medium with sugars and organic acids which allows convenient handling in lab routines. In autotrophic bioreactor cultivations with syngas, H. pseudoflava exhibited a growth rate of 0.06 h^-1 and biomass specific uptakes rates of 14.2 ± 0.3 mmol H₂ g_CDW^-1 h^-1, 73.9 ± 1.8 mmol CO g_CDW^-1 h^-1, and 31.4 ± 0.3 mmol O₂ g_CDW^-1 h^-1. As proof of concept, we engineered the carboxydotrophic bacterium for the aerobic production of the C₁₅ sesquiterpene (E)-α-bisabolene from the C₁ carbon source syngas by heterologous expression of the (E)-α-bisabolene synthase gene agBIS. The resulting strain H. pseudoflava (pOCEx1:agBIS) produced 59 ± 8 μg (E)-α-bisabolene L^-1 with a volumetric productivity Q_p of 1.2 ± 0.2 μg L^-1 h^-1 and a biomass-specific productivity q_p of 13.1 ± 0.6 μg g_CDW^-1 h^-1. The intrinsic properties and the genetic repertoire of H. pseudoflava make this carboxydotrophic bacterium a promising candidate for future aerobic production processes to synthesize more complex or ATP-intensive chemicals from syngas.

Structural and Phylogenetic Diversity of Anaerobic Carbon-Monoxide Dehydrogenases

Anaerobic Ni-containing carbon-monoxide dehydrogenases (Ni-CODHs) catalyze the reversible conversion between carbon monoxide and carbon dioxide as multi-enzyme complexes responsible for carbon fixation and energy conservation in anaerobic microbes. However, few biochemically characterized model enzymes exist, with most Ni-CODHs remaining functionally unknown. Here, we performed phylogenetic and structure-based Ni-CODH classification using an expanded dataset comprised of 1942 non-redundant Ni-CODHs from 1375 Ni-CODH-encoding genomes across 36 phyla. Ni-CODHs were divided into seven clades, including a novel clade. Further classification into 24 structural groups based on sequence analysis combined with structural prediction revealed diverse structural motifs for metal cluster formation and catalysis, including novel structural motifs potentially capable of forming metal clusters or binding metal ions, indicating Ni-CODH diversity and plasticity. Phylogenetic analysis illustrated that the metal clusters responsible for intermolecular electron transfer were drastically altered during evolution. Additionally, we identified novel putative Ni-CODH-associated proteins from genomic contexts other than the Wood–Ljungdahl pathway and energy converting hydrogenase system proteins. Network analysis among the structural groups of Ni-CODHs, their associated proteins and taxonomies revealed previously unrecognized gene clusters for Ni-CODHs, including uncharacterized structural groups with putative metal transporters, oxidoreductases, or transcription factors. These results suggested diversification of Ni-CODH structures adapting to their associated proteins across microbial genomes.

The Challenging in silico Description of Carbon Monoxide Oxidation as Catalyzed by Molybdenum-Copper CO Dehydrogenase

Carbon monoxide (CO) is a highly toxic gas to many living organisms. However, some microorganisms are able to use this molecule as the sole source of carbon and energy. Soil bacteria such as the aerobic Oligotropha carboxidovorans are responsible for the annual removal of about 2x108 tons of CO from the atmosphere. Detoxification through oxidation of CO to CO2 is enabled by the MoCu-dependent CO-dehydrogenase enzyme (MoCu-CODH) which-differently from other enzyme classes with similar function-retains its catalytic activity in the presence of atmospheric O2. In the last few years, targeted advancements have been described in the field of bioengineering and biomimetics, which is functional for future technological exploitation of the catalytic properties of MoCu-CODH and for the reproduction of its reactivity in synthetic complexes. Notably, a growing interest for the quantum chemical investigation of this enzyme has recently also emerged. This mini-review compiles the current knowledge of the MoCu-CODH catalytic cycle, with a specific focus on the outcomes of theoretical studies on this enzyme class. Rather controversial aspects from different theoretical studies will be highlighted, thus illustrating the challenges posed by this system as far as the application of density functional theory and hybrid quantum-classical methods are concerned.

Carbon Monoxide Dehydrogenases

Carbon monoxide dehydrogenases (CODHs) catalyze the reversible oxidation of CO with water to CO₂, two electrons, and two protons. Two classes of CODHs exist, having evolved from different scaffolds featuring active sites built from different transition metals. The basic properties of both classes are described in this overview chapter.

Life on the fringe: microbial adaptation to growth on carbon monoxide

Microbial adaptation to extreme conditions takes many forms, including specialized metabolism which may be crucial to survival in adverse conditions. Here, we analyze the diversity and environmental importance of systems allowing microbial carbon monoxide (CO) metabolism. CO is a toxic gas that can poison most organisms because of its tight binding to metalloproteins. Microbial CO uptake was first noted by Kluyver and Schnellen in 1947, and since then many microbes using CO via oxidation have emerged. Many strains use molecular oxygen as the electron acceptor for aerobic oxidation of CO using Mo-containing CO oxidoreductase enzymes named CO dehydrogenase. Anaerobic carboxydotrophs oxidize CO using CooS enzymes that contain Ni/Fe catalytic centers and are unrelated to CO dehydrogenase. Though rare on Earth in free form, CO is an important intermediate compound in anaerobic carbon cycling, as it can be coupled to acetogenesis, methanogenesis, hydrogenogenesis, and metal reduction. Many microbial species—both bacteria and archaea—have been shown to use CO to conserve energy or fix cell carbon or both. Microbial CO formation is also very common. Carboxydotrophs thus glean energy and fix carbon from a “metabolic leftover” that is not consumed by, and is toxic to, most microorganisms. Surprisingly, many species are able to thrive under culture headspaces sometimes exceeding 1 atmosphere of CO. It appears that carboxydotrophs are adapted to provide a metabolic “currency exchange” system in microbial communities in which CO arising either abiotically or biogenically is converted to CO ₂ and H ₂ that feed major metabolic pathways for energy conservation or carbon fixation. Solventogenic CO metabolism has been exploited to construct very large gas fermentation plants converting CO-rich industrial flue emissions into biofuels and chemical feedstocks, creating renewable energy while mitigating global warming. The use of thermostable CO dehydrogenase enzymes to construct sensitive CO gas sensors is also in progress.

X-Ray Crystallography of Carbon Monoxide Dehydrogenases

Carbon monoxide dehydrogenases (CODHs) are central players in the biogeochemical carbon monoxide (CO) cycle and have been extensively studied from the ecological level to the structural/molecular level. Of the two types of CODHs, the oxygen-tolerant CODHs use a bimetallic [CuSMo(=O)OH] center connected to the protein via a pyranopterin cofactor, whereas the oxygen-sensitive CODHs contain a [NiFe₄S₄-OH_x]-cluster. Despite the fact that we have a basic understanding of how both types of CODHs use distinct active sites to catalyze the oxidation of CO with water to CO₂, two protons, and two electrons (a reversible reaction in the cases of the oxygen-sensitive CODHs), many questions remain unanswered, especially concerning the electronic structures of the intermediate states. Since these states will likely be only revealed by the interplay of experimental and theoretical methods, there is a need to obtain accurate descriptions of the active site architectures in various states and, consequently, a need to generate crystals with good diffraction quality and collect data at element-specific wavelengths in order to determine the identity of elements in the case of mixed states. This chapter provides a description of the general working protocols for the crystallization and structural analysis of Cu,Mo-CODH and Ni,Fe-CODH that facilitates the mechanistic investigations of these important metalloenzymes.

Something special about CO-dependent CO2 fixation

Carbon dioxide enters metabolism via six known CO₂ fixation pathways, of which only one is linear, exergonic in the direction of CO₂‐assimilation, and present in both bacterial and archaeal anaerobes – the Wood‐Ljungdahl (WL) or reductive acetyl‐CoA pathway. Carbon monoxide (CO) plays a central role in the WL pathway as an energy rich intermediate. Here, we scan the major biochemical reaction databases for reactions involving CO and CO₂. We identified 415 reactions corresponding to enzyme commission (EC) numbers involving CO₂, which are non‐randomly distributed across different biochemical pathways. Their taxonomic distribution, reversibility under physiological conditions, cofactors and prosthetic groups are summarized. In contrast to CO₂, only 15 reaction classes involving CO were detected. Closer inspection reveals that CO interfaces with metabolism and the carbon cycle at only two enzymes: anaerobic carbon monoxide dehydrogenase (CODH), a Ni‐ and Fe‐containing enzyme that generates CO for CO₂ fixation in the WL pathway, and aerobic CODH, a Mo‐ and Cu‐containing enzyme that oxidizes environmental CO as an electron source. The CO‐dependent reaction of the WL pathway involves carbonyl insertion into a methyl carbon‐nickel at the Ni‐Fe‐S A‐cluster of acetyl‐CoA synthase (ACS). It appears that no alternative mechanisms to the CO‐dependent reaction of ACS have evolved in nearly 4 billion years, indicating an ancient and mechanistically essential role for CO at the onset of metabolism.

Maturation of the [Ni-4Fe-4S] active site of carbon monoxide dehydrogenases

Nickel-containing enzymes are diverse in terms of function and active site structure. In many cases, the biosynthesis of the active site depends on accessory proteins which transport and insert the Ni ion. We review and discuss the literature related to the maturation of carbon monoxide dehydrogenases (CODH) which bear a nickel-containing active site consisting of a [Ni–4Fe–4S] center called the C-cluster. The maturation of this center has been much less studied than that of other nickel-containing enzymes such as urease and NiFe hydrogenase. Several proteins present in certain CODH operons, including the nickel-binding proteins CooT and CooJ, still have unclear functions. We question the conception that the maturation of all CODH depends on the accessory protein CooC described as essential for nickel insertion into the active site. The available literature reveals biological variations in CODH active site biosynthesis.

Models for aerobic carbon monoxide dehydrogenase: synthesis, characterization and reactivity of paramagnetic MoVO(μ-S)CuI complexes

Complexes exhibiting the Mo^VO(μ-S)Cu^I cores, EPR properties, electronic structures and biomimetic reactions of aerobic Mo/Cu-containing carbon monoxide dehydrogenases are reported.

Reaction of [CoCp₂][Tp^iPrMoOS(OAr)] [Cp = η⁵-cyclopentadienyl; Tp^iPr = hydrotris(3-isopropylpyrazol-1-yl)borate; OAr = phenolate or derivative thereof] with [Cu(NCMe)(Me₃tcn)]BF₄ (Me₃tcn = 1,4,7-trimethyl-1,4,7-triazacyclononane) in MeCN at –30 °C results in the formation of red-brown/black, paramagnetic, μ-sulfido-Mo(v)/Cu(i) complexes, Tp^iPrMoO(OAr)(μ-S)Cu(Me₃tcn). The complexes possess the MoO(μ-S)Cu core found in aerobic carbon monoxide dehydrogenases (CODHs) and exhibit X-band EPR spectra closely related to those of semi-reduced CODH, with g_iso ∼ 1.937, hyperfine coupling to ^95,97Mo (a_iso = 39–42 × 10^–4 cm^–1) and strong superhyperfine coupling to ^63,65Cu (a_iso = 34–63 × 10^–4 cm^–1). Anisotropic spectra exhibit monoclinic symmetry with g₁ ∼ 1.996, g₂ ∼ 1.944 and g₃ ∼ 1.882, and nearly isotropic A_Cu values (75–90 × 10^–4 cm^–1). The X-ray structures of four derivatives (Ar = Ph, C₆H₄^tBu-2, C₆H₄^sBu-2, C₆H₄Ph-4) are reported and discussed along with that of the Ar = C₆H₃^tBu₂-3,5 derivative (communicated in C. Gourlay, D. J. Nielsen, J. M. White, S. Z. Knottenbelt, M. L. Kirk and C. G. Young, J. Am. Chem. Soc., 2006, 128, 2164). The complexes exhibit distorted octahedral oxo-Mo(v) and distorted tetrahedral Cu(i) centres bridged by a single bent μ-sulfido ligand, with Mo–S and Cu–S distances and Mo–S–Cu angles in the ranges 2.262–2.300 Å, 2.111–2.134 Å and 115.87–134.27°, respectively. The 2 t-butyl derivative adopts a unique phenolate conformation with O Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]> Mo–O–Cα and O Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]> Mo–S–Cu torsion angles of 92.7 and 21.1°, respectively, very different from those of the other structurally characterized derivatives (31–47 and 33–45°, respectively) and exhibits a relatively short Mo···Cu distance [3.752(2) Å vs. 3.806(7)–4.040(2) Å]. As well, the a_Cu value of this complex (34.3 × 10^–4 cm^–1) is much lower than the values observed for other members of the series (55–63 × 10^–4 cm^–1), supporting the hypothesis that the electronic structure of the MoO(μ-S)Cu core unit and the degree of intermetallic communication are strongly dependent on the geometry of the MoO(OR)(μ-S)Cu unit. The complexes participate in an electrochemically reversible Mo(vi)/Mo(v) redox couple and react with cyanide undergoing decupration and desulfurization reactions of the type observed for CODH.

Cooperative bimetallic reactivity of a heterodinuclear molybdenum–copper model of Mo–Cu CODH

Modeling the reactivity of Mo–Cu CODH: Cu(i) brings the substrate close to Mo–oxo and develops electrophilic character in CO carbon.

Expression and characterization of Pantoea CO dehydrogenase to utilize CO-containing industrial waste gas for expanding the versatility of CO dehydrogenase

Although aerobic CO dehydrogenases (CODHs) might be applicable in various fields, their practical applications have been hampered by low activity and no heterologous expression. We, for the first time, could functionally express recombinant PsCODH in E. coli and obtained a highly concentrated recombinant enzyme using an easy and convenient method. Its electron acceptor spectra, optimum conditions (pH 6.5 and 30 °C), and kinetic parameters (k_cat of 12.97 s⁻¹, K_m of 0.065 mM, and specific activity of 0.86 Umg⁻¹) were examined. Blast furnace gas (BFG) containing 20% CO, which is a waste gas from the steel-making process, was tested as a substrate for PsCODH. Even with BFG, the recombinant PsCODH retained 88.2% and 108.4% activity compared with those of pure CO and 20% CO, respectively. The results provide not only a promising strategy to utilize CO-containing industrial waste gases as cheap, abundant, and renewable resources but also significant information for further studies about cascade reactions producing value-added chemicals via CO₂ as an intermediate produced by a CODH-based CO-utilization system, which would ultimately expand the versatility of CODH.

d(1) Oxosulfido-Mo(V) Compounds: First Isolation and Unambiguous Characterization of an Extended Series

Reaction of Tp(iPr)Mo(VI)OS(OAr) with cobaltocene in toluene results in the precipitation of brown, microcrystalline oxosulfido-Mo(V) compounds, [CoCp2][Tp(iPr)Mo(V)OS(OAr)] (Cp(-) = η(5)-C5H5(-), Tp(iPr)(-) = hydrotris(3-isopropylpyrazol-1-yl)borate, OAr(-) = phenolate or 2-(s)Bu, 2-(t)Bu, 3-(t)Bu, 4-(s)Bu, 4-Ph, 3,5-(s)Bu2, 2-CO2Me, 2-CO2Et or 2-CO2Ph derivative thereof). The compounds are air- and water-sensitive and display ν(Mo═O) and ν(Mo[Formula: see text]S) IR absorption bands at ca. 890 and 435 cm(-1), respectively, 20-40 cm(-1) lower in energy than the corresponding bands in Tp(iPr)MoOS(OAr). They are electrochemically active and exhibit three reversible cyclovoltammetric waves (E(Mo(VI)/Mo(V)) = -0.40 to -0.66 V, E([CoCp2](+)/CoCp2) = -0.94 V and E(CoCp2/[CoCp2](-)) = -1.88 V vs SCE). Structural characterization of [CoCp2][Tp(iPr)MoOS(OC6H4CO2Et-2)]·2CH2Cl2 revealed a distorted octahedral Mo(V) anion with Mo═O and Mo[Formula: see text]S distances of 1.761(5) and 2.215(2) Å, respectively, longer than corresponding distances in related Tp(iPr)MoOS(OAr) compounds. The observation of strong S(1s) → (S(3p) + Mo(4d)) S K-preedge transitions indicative of a d(1) sulfido-Mo(V) moiety and the presence of short Mo═O (ca. 1.72 Å) and Mo[Formula: see text]S (ca. 2.25 Å) backscattering contributions in the Mo K-edge EXAFS further support the oxosulfido-Mo(V) formulation. The compounds are EPR-active, exhibiting highly anisotropic (Δg 0.124-0.150), rhombic, frozen-glass spectra with g1 close to the value observed for the free electron (ge = 2.0023). Spectroscopic studies are consistent with the presence of a highly covalent Mo[Formula: see text]S π* singly occupied molecular orbital. The compounds are highly reactive, with reactions localized at the terminal sulfido ligand. For example, the compounds react with cyanide and PPh3 to produce thiocyanate and SPPh3, respectively, and various (depending on solvent) oxo-Mo(V) species. Reactions with copper reagents also generally lead to desulfurization and the formation of oxo-Mo(V) or -Mo(IV) complexes.