Biodegradable nanofibrous drug delivery systems: effects of metronidazole and ciprofloxacin on periodontopathogens and commensal oral bacteria

Guidance on biomaterials for periodontal tissue regeneration: Fabrication methods, materials and biological considerations

Regeneration of the multiple tissues and interfaces in the periodontal complex necessitates multidisciplinary evaluation to establish structure/function relationships. This article, an initiative of the Academy of Dental Materials, provides guidance for performing chemical, structural, and mechanical characterization of materials for periodontal tissue regeneration, and outlines important recommendations on methods of testing bioactivity, biocompatibility, and antimicrobial properties of biomaterials/scaffolds for periodontal tissue engineering. First, we briefly summarize periodontal tissue engineering fabrication methods. We then highlight critical variables to consider when evaluating a material for periodontal tissue regeneration, and the fundamental tests used to investigate them. The recommended tests and designs incorporate relevant international standards and provide a framework for characterizing newly developed materials focusing on the applicability of those tests for periodontal tissue regeneration. The most common methods of biofabrication (electrospinning, injectable hydrogels, fused deposition modelling, melt electrowriting, and bioprinting) and their specific applications in periodontal tissue engineering are reviewed. The critical techniques for morphological, chemical, and mechanical characterization of different classes of materials used in periodontal regeneration are then described. The major advantages and drawbacks of each assay, sample sizes, and guidelines on specimen preparation are also highlighted. From a biological standpoint, fundamental methods for testing bioactivity, the biocompatibility of materials, and the experimental models for testing the antimicrobial potential are included in this guidance. In conclusion, researchers performing studies on periodontal tissue regeneration will have this guidance as a tool to assess essential properties and characteristics of their materials/scaffold-based strategies.

Electrospun nanofibers: Focus on local therapeutic delivery targeting infectious disease

Whether it be due to genetic variances, lack of patient adherence, or sub-optimal drug metabolism, the risk of antibiotic resistance from medications administered systemically continues to pose significant challenges to fighting infectious diseases. Ideally, infections would be treated locally for maximal efficacy while minimizing off-target effects. The electrospinning of biomaterials has recently facilitated the creation of electrospun nanofibers as an alternative delivery vehicle for local treatment. This review describes electrospun nanofiber applications to locally target various infectious diseases. Electrospinning is first reviewed as a method to fabricate nanofiber platforms with advantageous properties for developing drug delivery systems. The emergence of artificial intelligence to facilitate the development of nanofiber formulations and the evaluation of operating parameters to customize therapeutic behavior are described. A range of biomaterials utilized for electrospinning nanofibers is summarized in the context of properties suitable for drug delivery, particularly to treat infectious diseases. The current body of literature for electrospun nanofiber applications to tackle infectious diseases, including sexually transmitted infections, oral infections, and Staphylococcus Aureus infections is described. We anticipate that the advantages of electrospun nanofibers to facilitate targeted application while minimizing antibiotic resistance will substantially expand their clinical use in coming years.

Biofabrication - Revolutionizing the future of regenerative periodontics

Periodontium is a compartmentalized and highly specialized tissue responsible for tooth stability. Loss of tooth attachment due to periodontitis and trauma is a complex clinical burden affecting a large parcel of the adult and elderly population worldwide, and regenerative strategies to reestablish the native conditions of the periodontium are paramount. Biofabrication of scaffolds, through various techniques and materials, for regenerative periodontics has significantly evolved in the last decades. From the basics of occlusive membranes and graft materials to the complexity of converging 3D printing and Bioprinting using image-based models, biofabrication opens many possibilities for patient-specific scaffolds that recapitulate the anatomical and physiological conditions of periodontal tissues and interfaces. Thus, this review presents fundamental concepts related to the native characteristics of the periodontal tissues, the key to designing personalized strategies, and the latest trends of biofabrication in regenerative periodontics with a critical overview of how these emerging technologies have the potential to shift the one-size-fits-all paradigm.

Development and characterization of nitazoxanide-loaded poly(ε-caprolactone) membrane for GTR/GBR applications

OBJECTIVE

Guided tissue/guided bone regeneration (GTR/GBR) membranes are widely used for periodontal bone regeneration, but their success depends on a bacteria-free environment. Systemic antibiotic treatment often proves inadequate, moreover, the increasing prevalence of antibiotic resistance in oral infections exacerbates this challenge. This study aimed to fabricate antibacterial membranes using a new class of antibiotics for local drug delivery, to eradicate infections and promote tissue regeneration.

METHODS

Membranes loaded with nitazoxanide (NTZ) were fabricated via electrospinning using poly(ε-caprolactone) (PCL) with varying concentrations of NTZ (0 %, 2.5 %, and 5 % w/w) relative to the polymer weight. Morphochemical of NTZ-loaded membranes were assessed using scanning electron microscopy-energy dispersive spectroscopy (SEM-EDS) and Fourier Transform Infrared spectroscopy (FTIR). Mechanical properties were evaluated using universal testing machine and NTZ release profile from membranes was determined by spectrophotometer (λmax = 444) for 14 days. Antimicrobial efficacy against periodontal pathogens, cell compatibility and mineralization were evaluated using periodontal ligament stem cells (PDLSCs).

RESULTS

Optimized spinning parameter maintained a uniform fiber diameter and successful loading of NTZ was confirmed by SEM-EDS and FTIR. NTZ incorporation did not significantly affect mechanical properties, whereas the drug release kinetics showed an initial burst, followed by sustained release over 14 days. NTZ-loaded membranes demonstrated antibacterial activity against Aggregatibacter actinomycetemcomitans (Aa) and Fusobacterium nucleatum (Fn). Importantly, the presence of NTZ showed minimal cell toxicity; however, it reduced the mineralization potential compared with that of the pure PCL membrane, which increased over time.

SIGNIFICANCE

Taken together, these findings established that NTZ-loaded membranes could be promising barrier membrane to counteract microbial environment and aid periodontal bone regeneration.

Supra and subgingival application of antiseptics or antibiotics during periodontal therapy

Periodontal diseases (gingivitis and periodontitis) are characterized by inflammatory processes which arise as a result of disruption of the balance in the oral ecosystem. According to the current S3 level clinical practice guidelines, therapy of patients with periodontitis involves a stepwise approach that includes the control of the patient's risk factors and the debridement of supra and subgingival biofilm. This debridement can be performed with or without the use of some adjuvant therapies, including physical or chemical agents, host modulating agents, subgingivally locally delivered antimicrobials, or systemic antimicrobials. Therefore, the main aim of this article is to review in a narrative manner the existing literature regarding the adjuvant application of local agents, either subgingivally delivered antibiotics and antiseptics or supragingivally applied rinses and dentifrices, during the different steps in periodontal therapy performed in Europe.

Benefits of Natural Antioxidants on Oral Health

In recent years, special attention has been paid to the correlation between oxidation-reduction mechanisms and human health. The free radicals produced via physiological cellular biochemical processes are major contributors to oxidation phenomena. Their instability is the major cause of cellular damage. Free radical reactive oxygen species containing oxygen are the best-known ones. The body neutralises the harmful effects of free radicals via the production of endogenous antioxidants (superoxide dismutase, catalase, glutathione, and melatonin). The field of study of nutraucetics has found antioxidant capacity in substances such as vitamins A, B, C, E, coenzyme Q-10, selenium, flavonoids, lipoic acid, carotenoids, and lycopene contained in some foods. There are several areas of investigation that aim to research the interaction between reactive oxygen species, exogenous antioxidants, and the microbiota to promote increased protection via the peroxidation of macromolecules (proteins, and lipids) by maintaining a dynamic balance among the species that make up the microbiota. In this scoping review, we aim to map the scientific literature on oxidative stress related to the oral microbiota, and the use of natural antioxidants to counteract it, to assess the volume, nature, characteristics, and type of studies available to date, and to suggest the possible gaps that will emerge from the analysis.

Underestimated microbial infection of resorbable membranes on guided regeneration

Barrier membranes are critical in creating tissuecompartmentalization for guided tissue (GTR) and bone regeneration (GBR) therapies. More recently, resorbable membranes have been widely used for tissue and bone regeneration due to their improved properties and the dispensable re-entry surgery for membrane removal. However, in cases with membrane exposure, this may lead to microbial contamination that will compromise the integrity of the membrane, surrounding tissue, and bone regeneration, resulting in treatment failure. Although the microbial infection can negatively influence the clinical outcomes of regenerative therapy, such as GBR and GTR, there is a lack of clinical investigations in this field, especially concerning the microbial colonization of different types of membranes. Importantly, a deeper understanding of the mechanisms of biofilm growth and composition and pathogenesis on exposed membranes is still missing, explaining the mechanisms by which bone regeneration is reduced during membrane exposure. This scoping review comprehensively screened and discussed the current in vivo evidence and possible new perspectives on the microbial contamination of resorbable membranes. Results from eligible in vivo studies suggested that different bacterial species colonized exposed membranes according to their composition (collagen, expanded polytetrafluoroethylene (non-resorbable), and polylactic acid), but in all cases, it negatively affected the attachment level and amount of bone gain. However, limited models and techniques have evaluated the newly developed materials, and evidence is scarce. Finally, new approaches to enhance the antimicrobial effect should consider changing the membrane surface or incorporating long-term released antimicrobials in an effort to achieve better clinical success.

Coaxial electrospun nanofibers as drug delivery system for local treatment of periodontitis

OBJECTIVES

The aim of the present study was to prepare resorbable polylactide fibers for periodontitis treatment using coaxial electrospinning to optimize the release of metronidazole (MNA) by reducing the initial burst effect.

METHODS

Poly(L-lactide-co-D,L-lactide) (PLA) fibers mats with different distributions of metronidazole (MNA) were manufactured by coaxial electrospinning (COAX). By COAX spinning the central core of the fiber was enriched with 40% MNA (m/m), while the sheath of the fiber consisted of PLA only (test group). In contrast, fibers of the control group were prepared by conventional electrospinning with the same amount of MNA but with a homogenous drug distribution (HDD - homogenously distributed drug). The release of MNA was determined by analyzing aliquots from the fiber mats using UV-VIS spectroscopy. Agar diffusion tests were carried out to determine the antibacterial effect on periodontopathogenic bacteria. Biocompatibility was tested in direct contact to human gingival fibroblasts (HGF) for two days.

RESULTS

The COAX mats showed a retarded drug release compared to the conventional HDD fibers. After 24 h, 64% of total MNA was released cumulatively from the COAX fibers while 90% of the MNA was released from the HDD fibers (controls). The antibacterial effect of COAX fibers was significantly higher after 24 h compared to the HDD fibers. Cell cultivation revealed significant higher numbers of vital cells among the COAX mats.

SIGNIFICANCE

COAX fibers showed improved sustained MNA release compared to conventional fibers and can be seen as potential drug delivery systems in local periodontitis treatment.

Electrospun Nanofibers for Periodontal Treatment: A Recent Progress

Periodontitis is a major threat to oral health, prompting scientists to continuously study new treatment techniques. The nanofibrous membrane prepared via electrospinning has a large specific surface area and high porosity. On the one hand, electrospun nanofibers can improve the absorption capacity of proteins and promote the expression of specific genes. On the other hand, they can improve cell adhesion properties and prevent fibroblasts from passing through the barrier membrane. Therefore, electrospinning has unique advantages in periodontal treatment. At present, many oral nanofibrous membranes with antibacterial, anti-inflammatory, and tissue regeneration properties have been prepared for periodontal treatment. First, this paper introduces the electrospinning process. Then, the commonly used polymers of electrospun nanofibrous membranes for treating periodontitis are summarized. Finally, different types of nanofibrous membranes prepared via electrospinning for periodontal treatment are presented, and the future evolution of electrospinning to treat periodontitis is described.

Novel cinnamon-laden nanofibers as a potential antifungal coating for poly(methyl methacrylate) denture base materials

OBJECTIVES

To modify the surface of denture base material by coating it with cinnamon-laden nanofibers to reduce Candida albicans (C. albicans) adhesion and/or proliferation.

MATERIALS AND METHODS

Heat-cured poly(methyl methacrylate) (PMMA) specimens were processed and coated, or not, with cinnamon-laden polymeric nanofibers (20 or 40 wt.% of cinnamon relative to the total polymer weight). Scanning electron microscopy (SEM) and Fourier-transform infrared spectroscopy (FTIR) analyses of the nanofibers were performed. Antifungal activity was assessed through agar diffusion and colony-forming unit (CFU/mL) assays. Representative SEM morphological analysis was carried out to observe the presence/absence of C. albicans on the fibers. Alamar blue assay was used to determine cell toxicity. Analysis of variance and the Tukey's test were used to analyze the data (α = 0.05).

RESULTS

SEM imaging revealed nanofibers with adequate (i.e., bead-free) morphological characteristics and uniform microstructure. FTIR confirmed cinnamon incorporation. The cinnamon-laden nanofibers led to growth inhibition of C. albicans. Viable fungal counts support a significant reduction on CFU/mL also directly related to cinnamon concentration (40 wt.%: mean log 6.17 CFU/mL < 20 wt.%: mean log 7.12 CFU/mL), which agrees with the SEM images. Cinnamon-laden nanofibers at 40 wt.% led to increased cell death.

CONCLUSIONS

The deposition of 20 wt.% cinnamon-laden nanofibers onto PMMA surfaces led to a significant reduction of the adhesive and/or proliferative ability of C. albicans, while maintaining epithelial cells' viability.

CLINICAL RELEVANCE

The high recurrence rates of denture stomatitis are associated with patient non-adherence to treatments and contaminated prostheses use. Here, we provide the non-patients' cooperation sensible method, which possesses antifungal action, hence improving treatment effectiveness.

Lipid Nanocarriers-Loaded Nanocomposite as a Suitable Platform to Release Antibacterial and Antioxidant Agents for Immediate Dental Implant Placement Restorative Treatment

Immediate implant placement is a single-stage restorative approach for missing teeth widely used to overcome the ridge remodeling process occurring after dental extractions. The success of this procedure relies on opportune osseointegration in the surrounding tissues. To support this process, a multifunctional nanocomposite, to be applied in the fresh post-extraction socket, was here designed, prepared, and characterized. This formulation consists of quercetin (QRC)-loaded nanostructured lipid carriers (NLCs) entrapped in a chitosan-based solid matrix containing ciprofloxacin (CPX). QRC-NLCs were prepared by homogenization followed by high-frequency sonication, and thereafter this dispersion was trapped in a chitosan-based CPX-loaded gel, obtaining the nanocomposite powder (BioQ-CPX) by lyophilization. BioQ-CPX displayed desirable properties such as high porosity (94.1 ± 0.5%), drug amounts (2.1% QRC and 3.5% CPX). and low swelling index (100%). Moreover, the mechanism of drug release from BioQ-CPX and their ability to be accumulated in the target tissue were in vitro and ex vivo elucidated, also by applying mathematical models. When trapped into the nanocomposite, QRC stressed under UV light exposure (50 W) was shown to maintain its antioxidant power, and CPX and QRC under natural light were stable over nine months. Finally, both the measured antioxidant power and the antimicrobial and antibiofilm properties on Staphylococcus aureus demonstrated that BioQ-CPX could be a promising platform to support the single-stage dental restorative treatment.

Encapsulation of Metronidazole in Biocompatible Macrocycles and Structural Characterization of Its Nano Spray-Dried Nanostructured Composite

Due to the great potential of biocompatible cucurbit[7]uril (CB7) and 4-sulfonatocalix[4]arene (SCX4) macrocycles in drug delivery, the confinement of the pharmaceutically important metronidazole as an ionizable model drug has been systematically studied in these cavitands. Absorption and fluorescence spectroscopic measurements gave 1.9 × 10⁵ M⁻¹ and 1.0 × 10⁴ M⁻¹ as the association constants of the protonated metronidazole inclusion in CB7 and SCX4, whereas the unprotonated guests had values more than one order of magnitude lower, respectively. The preferential binding of the protonated metronidazole resulted in 1.91 pH unit pK_a diminution upon encapsulation in CB7, but the complexation with SCX4 led to a pK_a decrease of only 0.82 pH unit. The produced protonated metronidazole–SCX4 complex induced nanoparticle formation with protonated chitosan by supramolecular crosslinking of the polysaccharide chains. The properties of the aqueous nanoparticle solutions and the micron-sized solid composite produced therefrom by nano spray drying were unraveled. The results of the present work may find application in the rational design of tailor-made self-assembled drug carrier systems.

Personalized and Defect-Specific Antibiotic-Laden Scaffolds for Periodontal Infection Ablation

Periodontitis compromises the integrity and function of tooth-supporting structures. Although therapeutic approaches have been offered, predictable regeneration of periodontal tissues remains intangible, particularly in anatomically complex defects. In this work, personalized and defect-specific antibiotic-laden polymeric scaffolds containing metronidazole (MET), tetracycline (TCH), or their combination (MET/TCH) were created via electrospinning. An initial screening of the synthesized fibers comprising chemo-morphological analyses, cytocompatibility assessment, and antimicrobial validation against periodontopathogens was accomplished to determine the cell-friendly and anti-infective nature of the scaffolds. According to the cytocompatibility and antimicrobial data, the 1:3 MET/TCH formulation was used to obtain three-dimensional defect-specific scaffolds to treat periodontally compromised three-wall osseous defects in rats. Inflammatory cell response and new bone formation were assessed by histology. Micro-computerized tomography was performed to assess bone loss in the furcation area at 2 and 6 weeks post implantation. Chemo-morphological and cell compatibility analyses confirmed the synthesis of cytocompatible antibiotic-laden fibers with antimicrobial action. Importantly, the 1:3 MET/TCH defect-specific scaffolds led to increased new bone formation, lower bone loss, and reduced inflammatory response when compared to antibiotic-free scaffolds. Altogether, our results suggest that the fabrication of defect-specific antibiotic-laden scaffolds holds great potential toward the development of personalized (i.e., patient-specific medication) scaffolds to ablate infection while affording regenerative properties.

Should local drug delivery systems be used in dentistry?

In dentistry, the use of biomaterial-based drug delivery systems (DDS) aiming the release of the active compounds directly to the site of action is slowly getting more awareness among the scientific and medical community. Emerging technologies including nanotechnological platforms are offering novel approaches, but the majority are still in the proof-of-concept stage. This study critically reviews the potential use of DDS in anesthesiology, oral diseases, cariology, restorative dentistry, periodontics, endodontics, implantology, fixed and removable prosthodontics, and orthodontics with a special focus on infections. It also stresses the gaps and challenges faced. Despite numerous clinical and pharmacological advantages, some disadvantages of DDS pose an obstacle to their widespread use. The biomaterial's biofunctionality may be affected when the drug is incorporated and may cause an additional risk of toxicity. Also, the release of sub-therapeutic levels of drugs such as antibiotics may lead to microbial resistance. Multiple available techniques for the manufacture of DDS may affect drug release profiles and their bioavailability. If the benefits outweigh the costs, DDS may be potentially used to prevent or treat oral pathologies as an alternative to conventional strategies. A case-by-case approach must be followed.

Innovations in Craniofacial Bone and Periodontal Tissue Engineering - From Electrospinning to Converged Biofabrication

From a materials perspective, the pillars for the development of clinically translatable scaffold-based strategies for craniomaxillofacial (CMF) bone and periodontal regeneration have included electrospinning and 3D printing (biofabrication) technologies. Here, we offer a detailed analysis of the latest innovations in 3D (bio)printing strategies for CMF bone and periodontal regeneration and provide future directions envisioning the development of advanced 3D architectures for successful clinical translation. First, the principles of electrospinning applied to the generation of biodegradable scaffolds are discussed. Next, we present on extrusion-based 3D printing technologies with a focus on creating scaffolds with improved regenerative capacity. In addition, we offer a critical appraisal on 3D (bio)printing and multitechnology convergence to enable the reconstruction of CMF bones and periodontal tissues. As a future outlook, we highlight future directions associated with the utilization of complementary biomaterials and (bio)fabrication technologies for effective translation of personalized and functional scaffolds into the clinics.

Antimicrobial and physical properties of experimental endodontic sealers containing vegetable extracts

To assess the antimicrobial activity and the physical properties of resin-based experimental endodontic sealers with the incorporation of vegetable extracts obtained from Bixa orellana, Mentha piperita, and Tagetes minuta species. The extracts were obtained and characterized by gas chromatography-mass spectrometry (GC–MS), and minimum inhibitory concentration (MIC) against Streptococcus mutans, Enterococcus faecalis, and Candida albicans. The extracts were individually incorporated into a dual-cure experimental sealer at a mass concentration of 0.5%. A commercial reference RealSeal was used. The sealers were evaluated by measuring the setting time, degree of conversion, dimensional stability, radiopacity, flow, and film thickness of these materials, also and its antimicrobial effect was evaluated using the direct contact test. Data were statistically analyzed by analysis of variance and Tukey’s post-hoc test at α = 0.05 significance level. The physical properties were not influenced by the addition of the vegetable extracts (p > 0.05). For S. mutans, only T. minuta and B. orellana groups presented antibacterial activity after 24 h of contact (p < 0.05). All extracts evidenced an antibacterial effect against E. faecalis (p < 0.05). The experimental sealers hold promise as a novel vegetable sealer with great antimicrobial activity and also great physical–mechanical properties. Nonetheless, more studies are needed.

Tissue Engineering and Three-Dimensional Printing in Periodontal Regeneration: A Literature Review

The three-dimensional printing of scaffolds is an interesting alternative to the traditional techniques of periodontal regeneration. This technique uses computer assisted design and manufacturing after CT scan. After 3D modelling, individualized scaffolds are printed by extrusion, selective laser sintering, stereolithography, or powder bed inkjet printing. These scaffolds can be made of one or several materials such as natural polymers, synthetic polymers, or bioceramics. They can be monophasic or multiphasic and tend to recreate the architectural structure of the periodontal tissue. In order to enhance the bioactivity and have a higher regeneration, the scaffolds can be embedded with stem cells and/or growth factors. This new technique could enhance a complete periodontal regeneration. This review summarizes the application of 3D printed scaffolds in periodontal regeneration. The process, the materials and designs, the key advantages and prospects of 3D bioprinting are highlighted, providing new ideas for tissue regeneration.

The role of nanohydroxyapatite on the morphological, physical, and biological properties of chitosan nanofibers

OBJECTIVES

This study aimed to evaluate the effects of nanohydroxyapatite (nHAp) particles on the morphological, chemical, physical, and biological properties of chitosan electrospun nanofibers.

MATERIALS AND METHODS

nHAp particles with a 1.67 Ca/P ratio were synthesized via the aqueous precipitation method, incorporated into chitosan polymer solution (0.5 wt%), and electrospun into nHAp-loaded fibers (ChHa fibers). Neat chitosan fibers (nHAp-free, Ch fibers) were used as the control. The electrospun fiber mats were characterized using morphological, topographical, chemical, thermal, and a range of biological (antibacterial, antibiofilm, cell viability, and alkaline phosphatase [ALP] activity) analyses. Data were analyzed using ANOVA and Tukey's test (α = 0.05).

RESULTS

ChHa fibers demonstrated a bead-like morphology, with thinner (331 ± 110 nm) and smoother (Ra = 2.9 ± 0.3 μm) distribution as compared to the control fibers. Despite showing similar cell viability and ALP activity to Ch fibers, the ChHa fibers demonstrated greater antibacterial potential against most tested bacteria (except for P. intermedia), and higher antibiofilm activity against P. gingivalis biofilm.

CONCLUSIONS

The incorporation of nHAp particles did not jeopardize the overall morphology, topography, physical, and biological characteristics of the chitosan nanofibers.

CLINICAL RELEVANCE

The combination of nHAp particles with chitosan can be used to engineer bioactive, electrospun composite nanofibers with potential applications in regenerative dentistry.

Sustained-release delivery of antimicrobial drugs for the treatment of periodontal diseases: Fantasy or already reality?

Periodontal diseases are prevalent in humans. Conventional means of combating these diseases involve basic oral hygiene, mostly toothbrushing, use of mouthwashes, and flossing. Supplementary means of treatment, either clinical or pharmaceutical, are often necessary. The use of sustained-release delivery systems, applied locally to the periodontal pocket, seems to be one feasible approach: local sustained-release delivery of antibacterial agents to treat periodontal diseases is conceivable. The use of local (intrapocket) sustained-release delivery systems has numerous clinical, pharmacologic, and toxicologic advantages over conventional treatments for periodontal diseases. Sustained-release technology has been proven to be effective over the last few decades. Films, gels, and fibers are the three main classical intrapocket pharmaceutical delivery systems. Research today is more focused on improving drug delivery, and less on introducing new drugs. New approaches, eg, those making use of nanotechnology, are emerging for local drug-delivery systems. The local sustained-release delivery system concept is innovative and a few products are already commercially available.

Antimicrobial effect of nanostructured membranes for guided tissue regeneration: an in vitro study

OBJECTIVE

The purpose of this in vitro study was to evaluate the antibacterial effect of a novel non-resorbable, bioactive polymeric nanostructured membrane (NMs), when doped with zinc, calcium and doxycycline.

METHODS

A validated in vitro subgingival biofilm model with six bacterial species (Streptococcus oralis, Actinomyces naeslundii, Veillonela parvula, Fusobacterium nucleatum, Porphyromonas gingivalis and Aggregatibacter actinomycetemcomitans) was used. The experimental NMs, with and without being doped with doxycycline, calcium and zinc, were placed on hydroxyapatite (HA) discs. As positive control membranes, commercially available dense polytetrafluoroethylene (d-PTFE) membranes were used and, as negative controls, the HA discs without any membrane. The experimental, positive and negative control discs were exposed to a mixed bacterial suspension, at 37 °C under anaerobic conditions, during 12, 24, 48 and 72 h. The resulting biofilms were analyzed through scanning electron microscopy (SEM), to study their structure, and by quantitative polymerase chain reaction (qPCR), to assess the bacterial load, expressed as colony forming units (CFU) per mL. Differences between experimental and control groups were evaluated with the general linear model and the Bonferroni adjustment.

RESULTS

As shown by SEM, all membrane groups, except the NMs with doxycycline, resulted in structured biofilms from 12-72 hours. Similarly, only the membranes loaded with doxycycline demonstrated a significant reduction in bacterial load during biofilm development, when compared with the control groups (p < 0.001).

SIGNIFICANCE

Doxycycline-doped nanostructured membranes have an impact on biofilm growth dynamics by significant reducing the bacterial load.

The role of polymeric nanofibers on the mechanical behavior of polymethyl methacrylate resin

This study aimed to synthesize and characterize non-woven acrylonitrile butadiene styrene (ABS), polyamide-6 (P6), and polystyrene (PS) nanofibers, and evaluate their effects on the flexural strength and fracture resistance of fiber-modified polymethyl methacrylate (PMMA) resin. ABS, P6, and PS polymer solutions were prepared and electrospun into fiber mats, which were characterized by means of morphological, chemical, physical, and mechanical analyses. The fiber mats were then used to modify a thermally-activated PMMA resin, resulting in four testing groups: one unmodified group (control) and three fiber-modified groups incorporated with ABS, P6, or PS fiber mats. Flexural strength, work of fracture, and fractographic analysis were performed for all groups. Data were analyzed using Kruskal-Wallis or ANOVA tests (α = 0.05). The fiber diameter decreased, respectively, as follows: ABS > P6 > PS. Only the P6 fiber mats demonstrated a crystalline structure. Wettability was similar among the distinct fiber mats, although tensile strength was significantly greater for P6, followed by ABS, and then PS mats. Flexural strength of the fiber-modified PMMA resins was similar to the control, except for the weaker P6-based material. The work of fracture seemed to be greater and lower when the P6 and PS fibers were used, respectively. The fiber-modified groups exhibited a rougher pattern in the fractured surfaces when compared to the control, which may suggest that the presence of fibers deviates the direction of crack propagation, making the fracture mechanism of the PMMA resin more dynamic. While the neat PMMA showed a typical brittle response, the fiber-modified PMMA resins demonstrated a ductile response, combined with voids, suggesting large shear deformation during fracture. Altogether, despite the lack of direct reinforcement in the mechanical strength of the PMMA resin, the use of electrospun fibers showed promising application for the improvement of fracture behavior of PMMA resins, turning them into more compliant materials, although this effect may depend on the fiber composition.

Hybrid Antimicrobial Hydrogel as Injectable Therapeutics for Oral Infection Ablation

Oral bacterial infection represents the leading cause of the gradual destruction of tooth and periodontal structures anchoring the teeth. Lately, injectable hydrogels have gained increased attention as a promising minimally invasive platform for localized delivery of personalized therapeutics. Here, an injectable and photocrosslinkable gelatin methacryloyl (GelMA) hydrogel is successfully engineered with ciprofloxacin (CIP)-eluting short nanofibers for oral infection ablation. For this purpose, CIP or its β-cyclodextrin (β-CD)-inclusion complex (CIP/β-CD-IC) has been incorporated into polymeric electrospun fibers, which were subsequently cut into short nanofibers, and then embedded in GelMA to obtain an injectable hybrid antimicrobial hydrogel. Thanks to the solubility enhancement of CIP by β-CD-IC and the tunable degradation profile of GelMA, the hydrogels promote localized, sustained, and yet effective cell-friendly antibiotic doses, as measured by a series of bacterial assays that demonstrated efficacy in attenuating the growth of Gram-positive Enterococcus faecalis. Altogether, we foresee significant potential in translating this innovative hybrid hydrogel as an injectable platform technology that may have broad applications in oral infection ablation, such as periodontal disease and pulpal pathology.

The Effect of Cross-linking Efficiency of Drug-Loaded Novel Freeze Gelated Chitosan Templates for Periodontal Tissue Regeneration

Innovative strategies for periodontal regeneration have been the focus of research clusters across the globe for decades. In order to overcome the drawbacks of currently available options, investigators have suggested a novel concept of functionally graded membrane (FGM) templates with different structural and morphological gradients. Chitosan (CH) has been used in the past for similar purpose. However, the composite formulation of composite and tetracycline when cross-linked with glutaraldehyde have received little attention. Therefore, the purpose of the study was to investigate the drug loading and release characteristics of novel freeze gelated chitosan templates at different percentages of glutaraldehyde. These were cross-linked with 0.1 and 1% glutaraldehyde and loaded with doxycycline hyclate. The electron micrographs depicted porous morphology of neat templates. After cross-linking, these templates showed compressed ultrastructures. Computerized tomography analysis showed that the templates had 88 to 92% porosity with average pore diameter decreased from 78 to 44.9 μm with increasing concentration. Fourier transform infrared spectroscopy showed alterations in the glycosidic segment of chitosan fingerprint region which after drug loading showed a dominant doxycycline spectral composite profile. Interestingly, swelling profile was not affected by cross-linking either at 0.1 and 1% glutaraldehyde and template showed a swelling ratio of 80%, which gained equilibrium after 15 min. The drug release pattern also showed a 40 μg/mL of release after 24 h. These doxycycline-loaded templates show their tendency to be used in a functionally graded membrane facing the defect site.

Ex vivo investigations on bioinspired electrospun membranes as potential biomaterials for bone regeneration

OBJECTIVES

To assess the surface characteristics and composition that may enhance osteoblasts viability on novel electrospun composite membranes (organic polymer/silicon dioxide nanoparticles).

METHODS

Membranes are composed by a novel polymer blend, the mixture of two hydrophilic copolymers 2-hydroxyethylmethacrylate-co-methylmethacrylate and 2-hydroxyethylacrylate-co-methylacrylate, and they are doped with silicon dioxide nanoparticles. Then the membranes were functionalized with zinc or doxycycline. The membranes were morphologically characterized by atomic force and scanning electron microscopy (FESEM), and mechanically probed using a nanoindenter. Biomimetic calcium phosphate precipitation on polymeric tissues was assessed. Cell viability tests were performed using human osteosarcoma cells. Cells morphology was also studied by FESEM. Data were analyzed by ANOVA, Student-Newman-Keuls and Student t tests (p < 0.05).

RESULTS

Silica doping of membranes enhanced bioactivity and increased mechanical properties. Membranes morphology and mechanical properties were similar to those of trabecular bone. Zinc and doxycycline doping did not exert changes but it increased novel membranes bioactivity. Membranes were found to permit osteoblasts proliferation. Silica-doping favored cells proliferation and spreading. As soon as 24 h after the seeding, cells in silica-doped membranes were firmly attached to experimental tissues trough filopodia, connected to each other. The cells produced collagen and minerals onto the surfaces.

CONCLUSIONS

Silica nanoparticles enhanced surface properties and osteoblasts viability on electrospun membranes.

CLINICAL SIGNIFICANCE

The ability of silica-doped matrices to promote precipitation of calcium phosphate, together with their mechanical properties, observed non-toxicity, stimulating effect on osteoblasts and its surface chemistry allowing covalent binding of proteins, offer a potential strategy for bone regeneration applications.

Emerging Applications of Drug Delivery Systems in Oral Infectious Diseases Prevention and Treatment

The oral cavity is a unique complex ecosystem colonized with huge numbers of microorganism species. Oral cavities are closely associated with oral health and sequentially with systemic health. Many factors might cause the shift of composition of oral microbiota, thus leading to the dysbiosis of oral micro-environment and oral infectious diseases. Local therapies and dental hygiene procedures are the main kinds of treatment. Currently, oral drug delivery systems (DDS) have drawn great attention, and are considered as important adjuvant therapy for oral infectious diseases. DDS are devices that could transport and release the therapeutic drugs or bioactive agents to a certain site and a certain rate in vivo. They could significantly increase the therapeutic effect and reduce the side effect compared with traditional medicine. In the review, emerging recent applications of DDS in the treatment for oral infectious diseases have been summarized, including dental caries, periodontitis, peri-implantitis and oral candidiasis. Furthermore, oral stimuli-responsive DDS, also known as "smart" DDS, have been reported recently, which could react to oral environment and provide more accurate drug delivery or release. In this article, oral smart DDS have also been reviewed. The limits have been discussed, and the research potential demonstrates good prospects.

Rapid Release Polymeric Fibers for Inhibition of Porphyromonas gingivalis Adherence to Streptococcus gordonii

Active agents targeting key bacterial interactions that initiate biofilm formation in the oral cavity, may alter periodontitis progression; however, to date, specifically-targeted prophylactic and treatment strategies have been limited. Previously we developed a peptide, BAR (SspB Adherence Region), that inhibits oral P. gingivalis/S. gordonii biofilm formation in vitro and in vivo, and BAR nanoparticles that increase BAR effectiveness via multivalency and prolonged delivery. However, limited BAR loading and nanoparticle retention in the oral cavity can result in inadequate release and efficaciousness. Given this, an effective delivery platform that can release concentrations of BAR suitable for twice-daily applications, may offer an alternative that enhances loading, ease of administration, and retention in the oral cavity. With this in mind, the study objectives were to develop and characterize a rapid-release platform, composed of polymeric electrospun fibers (EFs) that encapsulate BAR, and to evaluate fiber safety and functionality against P. gingivalis/S. gordonii biofilms in vitro. Poly(lactic-co-glycolic acid) (PLGA), poly(L-lactic acid) (PLLA), and polycaprolactone (PCL) were electrospun alone or blended with polyethylene oxide (PEO), to provide high BAR loading and rapid-release. The most promising formulation, 10:90 PLGA:PEO EFs, provided 95% BAR release after 4 h, dose-dependent inhibition of biofilm formation (IC50 = 1.3 μM), disruption of established dual-species biofilms (IC50 = 2 μM), and maintained high cell viability. These results suggest that BAR-incorporated EFs may provide a safe and specifically-targeted rapid-release platform to inhibit and disrupt dual-species biofilms, that we envision may be applied twice-daily to exert prophylactic effect in the oral cavity.

Curcumin-A Natural Medicament for Root Canal Disinfection: Effects of Irrigation, Drug Release, and Photoactivation

INTRODUCTION

Curcumin incorporation into polymeric fibers was tested for its antimicrobial properties and potential use in root canal disinfection.

METHODS

Curcumin-modified fibers were processed via electrospinning and tested against a 7-day old established Actinomyces naeslundii biofilm. The medicaments tested were as follows: curcumin-modified fibers at 2.5 and 5.0 mg/mL, curcumin-based irrigant at 2.5 and 5.0 mg/mL, saline solution (negative control), and the following positive controls: 2% chlorhexidine, 1% sodium hypochlorite, and triple antibiotic paste (TAP, 1 mg/mL). All medicaments, except for the positive controls, were allocated according to the light exposure protocol (ie, photoactivation with a light-emitting diode every 30 seconds for 4 minutes or without photoactivation). After treatment, the medicaments were removed, and 1 mL saline solution was added; the biofilm was scraped from the well and used to prepare a 1:2000 dilution. Spiral plating was performed using anaerobic blood agar plates. After 24 hours, colony-forming units (colony-forming units/mL, n = 11/group) were counted to determine the antimicrobial effects.

RESULTS

Data exhibited significant antimicrobial effects on the positive control groups followed by the curcumin irrigants and, lastly, the photoactivated curcumin-modified fibers. There was a significant reduction of viable bacteria in curcumin-based irrigants, which was greater than the TAP-treated group. Curcumin-free fibers, saline, and the nonphotoactivated curcumin-modified fibers did not display antimicrobial activity.

CONCLUSIONS

Curcumin seems to be a potential alternative to TAP when controlling infection, but it requires a minimal concentration (2.5 mg/mL) to be effective. Photoactivation of curcumin-based medicaments seems to be essential to obtain greater antibiofilm activity.

Core-shell nanofibers as drug delivery systems

Core-shell nanofibers have grown in popularity over the last decade owing to their special features and their many applications in biomedicine. They can be produced by electrospinning of immiscible polymer blends or emulsions through a single nozzle or by electrospinning using a coaxial nozzle. Several of the electrospinning parameters allow great versatility for the compositions and diameters of core-shell nanofibers to be produced. Morphology of core-shell nanofibers can be investigated using transmission electron microscopy and, in some cases, scanning electron microscopy. Several studies have shown that core-shell nanofibers have some advantages over monolithic nanofibers, such as better drug, protein, gene or probiotic incorporation into the nanofibers, greater control over drug release, and maintenance of protein structure and activity during electrospinning. We herein review the production and characterization of core-shell nanofibers, the critical parameters that affect their development, and their advantages as delivery systems.

Nanofibrous antibiotic-eluting matrices: Biocompatibility studies in a rat model

This study evaluated the biocompatibility of degradable polydioxanone (PDS) electrospun drug delivery systems (hereafter referred as matrices) containing metronidazole (MET) or ciprofloxacin (CIP) after subcutaneous implantation in rats. Sixty adult male rats were randomized into six groups: SHAM (sham surgery); PDS (antibiotic-free matrix); 1MET (one 25 wt% MET matrix); 1CIP (one 25 wt% CIP matrix); 2MET (two 25 wt% MET matrices); and 2CIP (two 25 wt% CIP matrices). At 3 and 30 days, animals were assessed for inflammatory cell response (ICR), collagen fibers degradation, and oxidative profile (reactive oxygen species [ROS]; lipid peroxidation [LP]; and protein carbonyl [PC]). At 3 days, percentages of no/discrete ICR were 100, 93.3, 86.7, 76.7, 50, and 66.6 for SHAM, PDS, 1MET, 1CIP, 2MET, and 2CIP, respectively. At 30 days, percentages of no/discrete ICR were 100% for SHAM, PDS, 1MET, and 1CIP and 93.3% for 2MET and 2CIP. Between 3 and 30 days, SHAM, 1CIP, and 2CIP produced collagen, while 1MET and 2MET were unchanged. At 30 days, the collagen fiber means percentages for SHAM, PDS, 1MET, 1CIP, 2MET, and 2CIP were 63.7, 60.7, 56.6, 62.6, 51.8, and 61.7, respectively. Antibiotic-eluting matrices showed similar or better oxidative behavior when compared to PDS, except for CIP-eluting matrices, which showed higher levels of PC compared to SHAM or PDS at 30 days. Collectively, our findings indicate that antibiotic-eluting matrices may be an attractive biocompatible drug delivery system to fight periodontopathogens. © 2019 Wiley Periodicals, Inc. J Biomed Mater Res Part B, 2019.

Polymeric materials and films in dentistry: An overview

The use of polymeric materials (PMs) and polymeric films (PMFs) has increased in medicine and dentistry. This increasing interest is attributed to not only the excellent surfaces of PMs and PMFs but also their desired mechanical and biological properties, low production cost, and ease in processing, allowing them to be tailored for a wide range of applications. Specifically, PMs and PMFs are used in dentistry for their antimicrobial, drug delivery properties; in preventive, restorative and regenerative therapies; and for corrosion and friction reduction. PMFs such as acrylic acid copolymers are used as a dental adhesive; polylactic acids are used for dental pulp and dentin regeneration, and bioactive polymers are used as advanced drug delivery systems. The objective of this article was to review the literatures on the latest advancements in the use of PMs and PMFs in medicine and dentistry. Published literature (1990–2017) on PMs and PMFs for use in medicine and dentistry was reviewed using MEDLINE/PubMed and ScienceDirect resources. Furthermore, this review also explores the diversity of latest PMs and PMFs that have been utilized in dental applications, and analyzes the benefits and limitations of PMs and PMFs. Most of the PMs and PMFs have shown to improve the biomechanical properties of dental materials, but in future, more clinical studies are needed to create better treatment guidelines for patients.

Clindamycin-modified Triple Antibiotic Nanofibers: A Stain-free Antimicrobial Intracanal Drug Delivery System

INTRODUCTION

A biocompatible strategy to promote bacterial eradication within the root canal system after pulpal necrosis of immature permanent teeth is critical to the success of regenerative endodontic procedures. This study sought to synthesize clindamycin-modified triple antibiotic (metronidazole, ciprofloxacin, and clindamycin [CLIN]) polymer (polydioxanone [PDS]) nanofibers and determine in vitro their antimicrobial properties, cell compatibility, and dentin discoloration.

METHODS

CLIN-only and triple antibiotic CLIN-modified (CLIN-m, minocycline-free) nanofibers were processed via electrospinning. Scanning electron microscopy, Fourier-transform infrared spectroscopy (FTIR), and tensile testing were performed to investigate fiber morphology, antibiotic incorporation, and mechanical strength, respectively. Antimicrobial properties of CLIN-only and CLIN-m nanofibers were assessed against several bacterial species by direct nanofiber/bacteria contact and over time based on aliquot collection up to 21 days. Cytocompatibility was measured against human dental pulp stem cells. Dentin discoloration upon nanofiber exposure was qualitatively recorded over time. The data were statistically analyzed (P < .05).

RESULTS

The mean fiber diameter of CLIN-containing nanofibers ranged between 352 ± 128 nm and 349 ± 128 nm and was significantly smaller than PDS fibers. FTIR analysis confirmed the presence of antibiotics in the nanofibers. Hydrated CLIN-m nanofibers showed similar tensile strength to antibiotic-free (PDS) nanofibers. All CLIN-containing nanofibers and aliquots demonstrated pronounced antimicrobial activity against all bacteria. Antibiotic-containing aliquots led to a slight reduction in dental pulp stem cell viability but were not considered toxic. No visible dentin discoloration upon CLIN-containing nanofiber exposure was observed.

CONCLUSIONS

Collectively, based on the remarkable antimicrobial effects, cell-friendly, and stain-free properties, our data suggest that CLIN-m triple antibiotic nanofibers might be a viable alternative to minocycline-based antibiotic pastes.

Advanced Scaffolds for Dental Pulp and Periodontal Regeneration

No current therapy promotes root canal disinfection and regeneration of the pulp-dentin complex in cases of pulp necrosis. Antibiotic pastes used to eradicate canal infection negatively affect stem cell survival. Three-dimensional easy-to-fit antibiotic-eluting nanofibers, combined with injectable scaffolds, enriched or not with stem cells and/or growth factors, may increase the likelihood of achieving predictable dental pulp regeneration. Periodontitis is an aggressive disease that impairs the integrity of tooth-supporting structures and may lead to tooth loss. The latest advances in membrane biomodification to endow needed functionalities and technologies to engineer patient-specific membranes/constructs to amplify periodontal regeneration are presented.

Antimicrobial Efficacy of Triple Antibiotic-eluting Polymer Nanofibers against Multispecies Biofilm

The elimination of microbial flora in cases of immature permanent teeth with necrotic pulp is both key and a challenging goal for the long-term success of regenerative therapy. Recent research has focused on the development of cell-friendly intracanal drug delivery systems. This in vitro study aimed to investigate the antimicrobial action of 3-dimensional (3D) tubular-shaped triple antibiotic-eluting nanofibrous constructs against a multispecies biofilm on human dentin. Polydioxanone polymer solutions, antibiotic-free or incorporated with metronidazole, ciprofloxacin, and minocycline, were electrospun into 3D tubular-shaped constructs. A multispecies biofilm consisting of Actinomyces naeslundii, Streptococcus sanguinis, and Enterococcus faecalis was forced inside the dentinal tubules via centrifugation in a dentin slice in vitro model. The infected specimens were exposed to 2 experimental groups (ie, 3D tubular-shaped triple antibiotic-eluting constructs and triple antibiotic paste [TAP]) and 2 control groups (7-day biofilm untreated and antibiotic-free 3D tubular-shaped constructs). Biofilm elimination was quantitatively analyzed with confocal laser scanning microscopy. Confocal laser scanning microscopic (CLSM) analysis showed a dense population of viable (green) bacteria adhered to dentin and penetrated into the dentinal tubules. Upon 3D tubular-shaped triple antibiotic-eluting nanofibrous construct exposure, nearly complete elimination of viable bacteria on the dentin surface and inside the dentinal tubules was shown in the CLSM images, which was similar (P < .05) to the bacterial death promoted by the TAP group but significantly greater when compared with both the antibiotic-free 3D tubular-shaped constructs and the control (saline). The proposed 3D tubular-shaped antibiotic-eluting construct showed pronounced antimicrobial effects against the multispecies biofilm tested and therefore holds significant clinical potential as a disinfection strategy before regenerative endodontics.

Triple Antibiotic Polymer Nanofibers for Intracanal Drug Delivery: Effects on Dual Species Biofilm and Cell Function

INTRODUCTION

Root canal disinfection and the establishment of an intracanal microenvironment conducive to the proliferation/differentiation of stem cells play a significant role in regenerative endodontics. This study was designed to (1) investigate the antimicrobial efficacy of triple antibiotic-containing nanofibers against a dual-species biofilm and (2) evaluate the ability of dental pulp stem cells (DPSCs) to adhere to and proliferate on dentin upon nanofiber exposure.

METHODS

Seven-day-old dual-species biofilm established on dentin specimens was exposed for 3 days to the following: saline (control), antibiotic-free nanofibers (control), and triple antibiotic-containing nanofibers or a saturated triple antibiotic paste (TAP) solution (50 mg/mL in phosphate buffer solution). Bacterial viability was assessed using the LIVE/DEAD assay (Molecular Probes, Inc, Eugene, OR) and confocal laser scanning microscopy. For cytocompatibility studies, dentin specimens after nanofiber or TAP (1 g/mL in phosphate buffer solution) exposure were evaluated for cell adhesion and spreading by actin-phalloidin staining. DPSC proliferation was assessed on days 1, 3, and 7. Statistics were performed, and significance was set at the 5% level.

RESULTS

Confocal laser scanning microscopy showed significant bacterial death upon antibiotic-containing nanofiber exposure, differing significantly (P < .05) from antibiotic-free fibers and the control (saline). DPSCs showed enhanced adhesion/spreading on dentin specimens treated with antibiotic-containing nanofibers when compared with its TAP counterparts. The DPSC proliferation rate was similar on days 1 and 3 in antibiotic-free nanofibers, triple antibiotic-containing nanofibers, and TAP-treated dentin. Proliferation was higher (9-fold) on dentin treated with antibiotic-containing nanofibers on day 7 compared with TAP.

CONCLUSIONS

Triple antibiotic-containing polymer nanofibers led to significant bacterial death, whereas they did not affect DPSC attachment and proliferation on dentin.

Chitosan Biomaterials for Current and Potential Dental Applications

Chitosan (CHS) is a very versatile natural biomaterial that has been explored for a range of bio-dental applications. CHS has numerous favourable properties such as biocompatibility, hydrophilicity, biodegradability, and a broad antibacterial spectrum (covering gram-negative and gram-positive bacteria as well as fungi). In addition, the molecular structure boasts reactive functional groups that provide numerous reaction sites and opportunities for forging electrochemical relationships at the cellular and molecular levels. The unique properties of CHS have attracted materials scientists around the globe to explore it for bio-dental applications. This review aims to highlight and discuss the hype around the development of novel chitosan biomaterials. Utilizing chitosan as a critical additive for the modification and improvement of existing dental materials has also been discussed.

Novel potential scaffold for periodontal tissue engineering

OBJECTIVE

The objective of the study is characterization of novel calcium and zinc-loaded electrospun matrices to be used for periodontal regeneration.

MATERIALS AND METHODS

A polymethylmetacrylate-based membrane was calcium or zinc loaded. Matrices were characterized morphologically by atomic force and scanning electron microscopy and mechanically probed by a nanoindenter. Biomimetic calcium phosphate precipitation on polymeric tissues was assessed. Cell viability tests were performed using oral mucosa fibroblasts. Data were analyzed by Kruskal-Wallis and Mann-Whitney tests or by ANOVA and Student-Newman-Keuls multiple comparisons.

RESULTS

Zinc and calcium loading on matrices did not modify their morphology but increased nanomechanical properties and decreased nanoroughness. Precipitation of calcium and phosphate on the matrix surfaces was observed in zinc-loaded specimens. Matrices were found to be non-toxic to cells in all the assays. Calcium- and zinc-loaded scaffolds presented a very low cytotoxic effect.

CONCLUSIONS

Zinc-loaded membranes permit cell viability and promoted mineral precipitation in physiological conditions. Based on the tested nanomechanical properties and scaffold architecture, the proposed membranes may be suitable for cell proliferation.

CLINICAL RELEVANCE

The ability of zinc-loaded matrices to promote precipitation of calcium phosphate deposits, together with their observed non-toxicity and its surface chemistry allowing covalent binding of proteins, may offer new strategies for periodontal regeneration.

Novel bioactive tetracycline-containing electrospun polymer fibers as a potential antibacterial dental implant coating

The purpose of this investigation was to determine the ability of tetracycline-containing fibers to inhibit biofilm formation of peri-implantitis-associated pathogens [i.e., Porphyromonas gingivalis (Pg), Fusobacterium nucleatum (Fn), Prevotella intermedia (Pi), and Aggregatibacter actinomycetemcomitans (Aa)]. Tetracycline hydrochloride (TCH) was added to a poly(DL-lactide) [PLA], poly(ε-caprolactone) [PCL], and gelatin [GEL] polymer blend solution at distinct concentrations to obtain the following fibers: PLA:PCL/GEL (TCH-free, control), PLA:PCL/GEL + 5 % TCH, PLA:PCL/GEL + 10 % TCH, and PLA:PCL/GEL + 25 % TCH. The inhibitory effect of TCH-containing fibers on biofilm formation was assessed by colony-forming units (CFU/mL). Qualitative analysis of biofilm inhibition was done via scanning electron microscopy (SEM). Statistical significance was reported at p < 0.05. Complete inhibition of biofilm formation on the fibers was observed in groups containing TCH at 10 and 25 wt%. Fibers containing TCH at 5 wt% demonstrated complete inhibition of Aa biofilm. Even though a marked reduction in CFU/mL was observed with an increase in TCH concentration, Pi proved to be the most resilient microorganism. SEM images revealed the absence of or a notable decrease in bacterial biofilm on the TCH-containing nanofibers. Collectively, our data suggest that tetracycline-containing fibers hold great potential as an antibacterial dental implant coating.

Potential of Electrospun Nanofibers for Biomedical and Dental Applications

Electrospinning is a versatile technique that has gained popularity for various biomedical applications in recent years. Electrospinning is being used for fabricating nanofibers for various biomedical and dental applications such as tooth regeneration, wound healing and prevention of dental caries. Electrospun materials have the benefits of unique properties for instance, high surface area to volume ratio, enhanced cellular interactions, protein absorption to facilitate binding sites for cell receptors. Extensive research has been conducted to explore the potential of electrospun nanofibers for repair and regeneration of various dental and oral tissues including dental pulp, dentin, periodontal tissues, oral mucosa and skeletal tissues. However, there are a few limitations of electrospinning hindering the progress of these materials to practical or clinical applications. In terms of biomaterials aspects, the better understanding of controlled fabrication, properties and functioning of electrospun materials is required to overcome the limitations. More in vivo studies are definitely required to evaluate the biocompatibility of electrospun scaffolds. Furthermore, mechanical properties of such scaffolds should be enhanced so that they resist mechanical stresses during tissue regeneration applications. The objective of this article is to review the current progress of electrospun nanofibers for biomedical and dental applications. In addition, various aspects of electrospun materials in relation to potential dental applications have been discussed.

Regenerative endodontics--Creating new horizons

Trauma to the dental pulp, physical or microbiologic, can lead to inflammation of the pulp followed by necrosis. The current treatment modality for such cases is non-surgical root canal treatment. The damaged tissue is extirpated and the root canal system prepared. It is then obturated with an inert material such a gutta percha. In spite of advances in techniques and materials, 10%-15% of the cases may end in failure of treatment. Regenerative endodontics combines principles of endodontics, cell biology, and tissue engineering to provide an ideal treatment for inflamed and necrotic pulp. It utilizes mesenchymal stem cells, growth factors, and organ tissue culture to provide treatment. Potential treatment modalities include induction of blood clot for pulp revascularization, scaffold aided regeneration, and pulp implantation. Although in its infancy, successful treatment of damaged pulp tissue has been performed using principles of regenerative endodontics. This field is dynamic and exciting with the ability to shape the future of endodontics. This article highlights the fundamental concepts, protocol for treatment, and possible avenues for research in regenerative endodontics.

Dental pulp stem cell responses to novel antibiotic-containing scaffolds for regenerative endodontics

AIM

To evaluate both the drug-release profile and the effects on human dental pulp stem cells' (hDPSC) proliferation and viability of novel bi-mix antibiotic-containing scaffolds intended for use as a drug delivery system for root canal disinfection prior to regenerative endodontics.

METHODOLOGY

Polydioxanone (PDS)-based fibrous scaffolds containing both metronidazole (MET) and ciprofloxacin (CIP) at selected ratios were synthesized via electrospinning. Fibre diameter was evaluated based on scanning electron microscopy (SEM) images. Pure PDS scaffolds and a saturated CIP/MET solution (i.e. 50 mg of each antibiotic in 1 mL) (hereafter referred to as DAP) served as both negative (nontoxic) and positive (toxic) controls, respectively. High-performance liquid chromatography (HPLC) was performed to investigate the amount of drug(s) released from the scaffolds. WST-1(®) proliferation assay was used to evaluate the effect of the scaffolds on cell proliferation. LIVE/DEAD(®) assay was used to qualitatively assess cell viability. Data obtained from drug release and proliferation assays were statistically analysed at the 5% significance level.

RESULTS

A burst release of CIP and MET was noted within the first 24 h, followed by a sustained maintenance of the drug(s) concentration for 14 days. A concentration-dependent trend was noticed upon hDPSCs' exposure to all CIP-containing scaffolds, where increasing the CIP concentration resulted in reduced cell proliferation (P < 0.05) and viability. In groups exposed to pure MET or pure PDS scaffolds, no changes in proliferation were observed.

CONCLUSIONS

Synthesized antibiotic-containing scaffolds had significantly lower effects on hDPSCs proliferation when compared to the saturated CIP/MET solution (DAP).