Diagnostic accuracy of CBCT compared to panoramic radiography in predicting IAN exposure: a systematic review and meta-analysis

Two-stage extraction by partial grinding of impacted mandibular third molar in close proximity to the inferior alveolar nerve

BACKGROUND

Extraction of impacted third molars often leads to severe complications caused by damage to the inferior alveolar nerve (IAN).

AIM

To proposes a method for the partial grinding of an impacted mandibular third molar (IMM3) near the IAN to prevent IAN injury during IMM3 extraction.

METHODS

Between January 1996 and March 2022, 25 patients with IMM3 roots near the IAN were enrolled. The first stage of the operation consisted of grinding a major part of the IMM3 crown with a high-speed turbine dental drill to achieve sufficient space between the mandibular second molar and IMM3. After 6 months, when the root tips were observed to be away from the IAN on X-ray examination, the remaining part of the IMM3 was completely removed.

RESULTS

All IMM3s were extracted easily without symptoms of IAN injury after extraction.

CONCLUSION

Partial IMM3 grinding may be a good alternative treatment option to avoid IAN injury in high-risk cases.

System for automatically assessing the likelihood of inferior alveolar nerve injury

Inferior alveolar nerve (IAN) injury is a severe complication associated with mandibular third molar (MM3) extraction. Consequently, the likelihood of IAN injury must be assessed before performing such an extraction. However, existing deep learning methods for classifying the likelihood of IAN injury that rely on mask images often suffer from limited accuracy and lack of interpretability. In this paper, we propose an automated system based on panoramic radiographs, featuring a novel segmentation model SS-TransUnet and classification algorithm CD-IAN injury class. Our objective was to enhance the precision of segmentation of MM3 and mandibular canal (MC) and classification accuracy of the likelihood of IAN injury, ultimately reducing the occurrence of IAN injuries and providing a certain degree of interpretable foundation for diagnosis. The proposed segmentation model demonstrated a 0.9 % and 2.6 % enhancement in dice coefficient for MM3 and MC, accompanied by a reduction in 95 % Hausdorff distance, reaching 1.619 and 1.886, respectively. Additionally, our classification algorithm achieved an accuracy of 0.846, surpassing deep learning-based models by 3.8 %, confirming the effectiveness of our system.

Three-dimensional positional relationship between impacted mandibular third molars and the mandibular canal

OBJECTIVE

To observe the three-dimensional positional relationship between impacted mandibular third molars (IMTMs) and mandibular canal close contacts using cone beam computed tomography (CBCT).

METHODS

A total of 101 patients with IMTMs were selected who met the diagnostic criteria for 142 teeth (no bone wall imaging area between IMTMs and the mandibular canal, a high-density bone cortical imaging area only, or a ≦1 mm bone imaging area). The parameters of the rotating CBCT anode were set as follows: 110 kV, 40-50 mA; the focal point and exposure field were set as 0.3 mmh and a high-resolution zoom, respectively; the exposure time and image layer thickness were set as 5.4 s and 0.25 mm. Three-dimensional reconstruction was performed, and the position of the mandibular canal through the IMTM area was observed continuously from the coronal, horizontal and sagittal planes.

RESULTS

We found that the mandibular canal was interrupted below the third molar (TM) in 85 cases, accounting for 59.86% of all cases. The mandibular canal was located below the buccal and lingual curvatures in 33 and 19 cases, respectively, accounting for 23.23% and 19%. In addition, a small number of mandibular canals were also located on the buccal side of the mandibular molars (2.82%). We also found one case of direct insertion of the mandibular third molar (MTM) into the mandibular canal. In addition, the mandibular canal passed through the IMTM region with 125 close contacts at the roots (88.03%); 14 mandibular canals were in contact with all teeth and 3 were in contact with the crown.

CONCLUSION

The use of CBCT can provide a dynamic and comprehensive understanding of the three-dimensional positional relationship of the mandibular alveolar nerve canal passing through the IMTM area, providing a high clinical reference value when extracting IMTMs and reducing the risk of injury to the inferior alveolar nerve.

Forensic Age Estimation: A Multifactorial Approach in a Retrospective Population Study

Objectives: The objective of this study was to evaluate the accuracy of forensic age estimation in a German population by combining clavicle and wisdom teeth assessments based on cone beam computed tomography (CT) data. The study aimed to determine the reliability of this approach in predicting biological age. Material and Methods: A total of 161 CT data sets from 120 males and 41 females with known exact ages were evaluated by three raters. The clavicle was assessed according to stages 1-5 (including substages 2a-c and 3a-c), and the Demirjian stage's classification method was used for the wisdom teeth. Inter-class correlation (ICC) was calculated to assess the agreement among the three raters. Additionally, ordinary least square regressions were performed to predict chronological age using the clavicle or one of the four teeth. Finally, age prediction models using multiple indicators were developed. Results: The ICCs ranged from 0.82 for the clavicle to 0.86 and 0.88 for the wisdom teeth. Linear estimation tended to overestimate chronological age, especially in subjects over 18 years old. The clavicle showed the strongest overestimation. Combining age estimation from the clavicle with the upper and lower wisdom teeth improved the predictive power, resulting in a 14% and 15% increase in R² for the upper and lower wisdom teeth, respectively. Adding more than one tooth to the prediction did not improve the predictive power (all ΔR² < 1%). Conclusions: Age estimation using CT can be significantly improved by combining information from the analysis of wisdom teeth with age estimation based on the clavicle.

Application of Cone Beam Computed Tomography in Risk Assessment of Lower Third Molar Surgery

Risks of lower third molar surgery like the inferior alveolar nerve injury may result in permanent consequences. Risk assessment is important prior to the surgery and forms part of the informed consent process. Traditionally, plain radiographs like orthopantomogram have been used routinely for this purpose. Cone beam computed tomography (CBCT) has offered more information from the 3D images in the lower third molar surgery assessment. The proximity of the tooth root to the inferior alveolar canal, which harbours the inferior alveolar nerve, can be clearly identified on CBCT. It also allows the assessment of potential root resorption of the adjacent second molar as well as the bone loss at its distal aspect as a consequence of the third molar. This review summarized the application of CBCT in the risk assessment of lower third molar surgery and discussed how it could aid in the decision-making of high-risk cases to improve safety and treatment outcomes.

Monitoring cone-beam CT radiation dose levels in a University Hospital

OBJECTIVE

To present patient dose levels for different CBCT scanners, acquired by a dose monitoring tool in a University Hospital, as a function of field of view (FOV), operation mode, and patient age.

METHODS

An integrated dose monitoring tool was used to collect radiation exposure data [type of CBCT unit, dose-area product (DAP), FOV size, and operation mode] and patient demographic information (age, referral department) performed on a 3D Accuitomo 170 and a Newtom VGI EVO unit. Effective dose conversion factors were calculated and implemented into the dose monitoring system. For each CBCT unit, the frequency of examinations, clinical indications, and effective dose levels were obtained for different age and FOV groups, and operation modes.

RESULTS

A total of 5163 CBCT examinations were analyzed. Surgical planning and follow-up were the most frequent clinical indications. For the standard operation mode, effective doses ranged from 35.1 to 300 µSv and 9.26-117 µSv using 3D Accuitomo 170 and Newtom VGI EVO, respectively. In general, effective doses decreased with increasing age and FOV size reduction.

CONCLUSIONS

Effective dose levels varied notably between systems and operation modes.Operation mode selection and FOV size were indication-oriented, with larger FOV sizes election serving surgical planning and follow-up. Seeing the influence of FOV size on effective dose levels, manufacturers could be advised to move toward patient-specific collimation and dynamic FOV selection. Systematically monitoring patient doses could be recommended for steering future CBCT optimization.

Diagnostic value of routine dental radiographs for predicting the mandibular canal localization validated by cone-beam computed tomogram measurements

OBJECTIVES

To test the hypothesis that routine dental radiographs can be used to draw conclusions regarding the mandibular canal (MC) localization. MATERIAL AND METHODS: A total of 108 radiographs (36 orthopantomograms [OPTs], 36 lateral cephalograms [LCs], and 36 cone-beam computed tomograms [CBCTs]) of 36 patients were analyzed. Statistical analysis included all cephalometric parameters obtained by OPTs, LCs, and CBCTs. Potential influencing parameters were calculated using linear and logistic regression with a backward removal algorithm. For predictability of MC localization, parameters were correlated using Pearson's correlation.

RESULTS

The MC ran along the lingual half (n = 24) twice as often as in the buccal half (n = 12) in the population studied. The position was always symmetrical contralaterally. No sex-specific influence was observed (p = .34). Lingual and buccal MC courses were statistically significantly correlated to increased and decreased jaw angles (LC/OPT), respectively (p = .003; r = -.48/p = .010; r = -.42). An increased jaw angle was significantly correlated with a more cranial MC position (p = .013; r = -.41); a deep and distal bite position was significantly correlated with a caudal and buccal MC position (p = .004; r = -.47/p = .001; r = .57). Moreover, an increase of 1 point in the Hasund score predicted an increased probability of a buccal MC position by 18.6%. The jaw angle analyzed in OPT and LC images were positively correlated (r = .89, p < .001).

CONCLUSIONS

Routine dental radiographs provide informative guidance on the location of the MC in the vertical and transverse levels. This finding could be used in the initial consultation and treatment planning to consider more invasive diagnostic methods further down the line.