Complication rate in mandibular angle fractures-one vs. two plates: a 12-year retrospective analysis

Complications following miniplate insertion in maxillofacial fractures: a systematic review

Background

Maxillofacial fractures, frequently arising from road traffic incidents, falls, and acts of interpersonal aggression, are a considerable public health issue, exhibiting diverse epidemiological patterns according to demographic factors. The application of miniplates for fracture stabilization is a recognized technique, with innovative methods such as 3D plate systems emerging. Nonetheless, consequences including infections and hardware malfunctions persist. This systematic review seeks to present current evidence regarding the complications linked to miniplate placement in maxillofacial fractures over the last ten years.

Methods

A systematic review was performed in accordance with PRISMA principles. Databases such as the Cochrane Library, PubMed, and Scopus were examined from September 2014 to September 2024. Studies documenting problems related to miniplate placement were included, without language constraints. The ROBINS-I tool was utilized for non-randomized studies, whereas the Cochrane risk of bias tool was applied to randomized controlled trials.

Results

From 2,289 initially found studies, 56 satisfied the inclusion criteria. Among these, 28 employed interventional designs, whilst the remaining 28 were observational research. The predominant problems documented in several investigations encompassed infection, wound dehiscence, malocclusion, paraesthesia, malunion/non-union, segment movement, hardware failure, and palpable hardware. Advanced methodologies such as 3D plate systems and locking mechanisms were linked to diminished complication rates.

Conclusion

This systematic analysis presents a decade of updated research about problems associated with miniplate placement in maxillofacial fractures. Novel methodologies such as 3D plate systems and locking mechanisms demonstrate promise in mitigating problems relative to conventional techniques. These findings can facilitate informed decision-making in clinical practice. Additional study utilizing standardized outcomes and prospective designs is essential to enhance comprehension of the long-term effects of miniplate utilization.

Outcomes and Craniometric Analyses of the Champy Technique in the Treatment of Mandibular Angle Fractures: A Retrospective Study

The aim of this study is to examine the outcomes of superiorly placed monocortical single miniplate fixation in the treatment of mandibular angle fractures and evaluate treatment efficacy through craniometric measurements. Postoperative craniometrics were compared with both the preoperative measurements and the control group. Thirty-four patients were included with a mean follow-up of 3.1 years. Complications were observed in 6 patients, with 4 treated surgically and 2 managed nonoperatively. In the craniometric analyses, there was no significant difference between the preoperative and postoperative measurements of the gonial angle and condyle-midsagittal plane distance on both the fracture side and the contralateral side. The only significant difference was found in comparison of the degree of the mentum deviation (P=0.001). Postoperative mandibular morphometry was comparable to that of the control group. Single miniplate fixation corrects mentum deviation without resulting in any changes in condyle position and can achieve healthy mandibular morphometry.

Stability and Clinical Outcomes of Angle Fracture Fixation Using Sagittal Split Plate (SSOP) Versus Two Miniplates: Randomized Clinical Trial

The aim of this study was to compare the stability and clinical outcomes between the two miniplates and sagittal split plate (SSOP) in angle fracture fixation. Thirty-eight patients with a mandibular angle fracture were selected and divided randomly into two groups. Intervention was treated with SSOP, and the control group was treated with conventional two miniplates. Clinical evaluation included occlusion, edema, nerve affection, wound dehiscence and mouth opening. Radiographic parameters included the measurement of inter-ramus distance, inter-mental distance and bone density. All clinical parameters were evaluated at one week, one month and three months intervals. Radiographic parameters were evaluated immediately postoperative, and after three months. Results showed that SSOP had less postoperative complications (10.50%) than the two miniplates (31.60%). It can be concluded that both methods offered high performance in management of mandibular angle fractures. However, SSOP group had a significantly shorter operating time, increased bone density and less edema. Clinical trial registration number: NCT03839368.

Finite Element Analysis of New Modified Three-dimensional Strut Miniplate versus Conventional Plating in Mandibular Symphysis and Angle Fractures - An In vitro Study

Introduction

Mandibular fractures are common injuries during maxillofacial trauma, and currently, open reduction and internal fixation are considered gold-standard treatments. There is a wide discussion about which plates give the best outcomes. Hence, we are conducting a biomechanical comparison of two plates for mandibular symphysis and angle fracture with finite element analysis (FEA). The aim of this study was to do a comparative study of FEA between the conventional and our new modified three-dimensional (3D) strut miniplate in mandibular fractures at symphysis and angle regions.

Materials and Methods

Finite element models of symphyseal and angle fractures of the mandible were developed. Each fracture model was then realigned and fixed by the conventional method 2.0 mm system, and our modified 3D strut plating method 2.0 mm system followed by the analysis of various stresses developed in plates and mandibular fracture area after application of load was observed in the study.

Results

The modified 3D strut plating system with 2.0 mm miniplates is significantly better in preventing displacement of fracture segments by better distribution of forces compared to the conventional plating system. Rest of the parameters were within the permitted limits.

Discussion

Modified 3D strut plating method was reasonably effective and superior in managing force-displacement compared to the conventional method of fixation for comminuted and unfavourable mandibular symphyseal fracture and angle fracture.

New design titanium miniplate versus conventional miniplate in treatment of mandibular angle fractures: A comparative study

Introduction

Mandibular angle fracture (MAF) is the second most common site of all fractures of the mandible with the highest complication rate. Management of MAF has evolved in the past four decades. The purpose of the prospective study was to compare the efficacy of new design titanium miniplate (NDM) with conventional titanium miniplate (CTM) in the treatment of MAF.

Objectives

Mouth opening, occlusion, bite force measurement, and radiographs compared preoperatively and first week, first month and third month postoperatively.

Materials and Method

Fourteen patients diagnosed with MAF were randomly divided into two groups: Group A (seven patients) was treated with NDM and Group B (seven patients) with CTM. Patients were assessed preoperatively and postoperatively at an interval of one week, one month and three months.

Results

Repeated measures ANOVA and Post hoc Tukey test showed a significant increase in bite force and mouth opening for both groups in first and third postoperative months. Unpaired t-test showed slightly better mouth opening in Group B and slightly higher bite force in Group A.

Discussion

Both miniplates fulfilled all the study objectives and equally satisfactory healing was seen at the end of third month. NDM offers better stability, rigidity, and anatomic reduction of the fracture with a drawback of difficulty in adaptation and increased operative timing compared to CTM. Hence, we would like to conclude that both miniplates are equally efficient in the treatment of non-comminuted angle fractures with the NDM having upper hand in stability.

Should Degree of Third Molar Eruption Influence Operative Management of Mandibular Angle Fractures? A Systematic Review

Study Design

Systematic review.

Objective

There is a growing trend toward evidence-based management of third molars in the fracture line of mandibular angle fractures (MAFs). This study aimed to differentiate MAF fixation complications by degree of third molar eruption and by extraction strategy in patients undergoing Champy fixation.

Methods

PubMed, EMBASE, OVID, SCOPUS, the Cochrane Library, and clinicaltrials.gov were queried through May 2020 for English-language publications for MAFs with third molar involvement for this systematic review. Bias was assessed using author-defined criteria. Relative risk (RR) of post-operative complications associated with extracted unerupted and retained partially erupted third molars (Group I) was calculated against controls of retained unerupted and extracted partially erupted third molars (Group II).

Results

Ten studies reported complications by eruption or extraction; however, only one study stratified complications by both eruption and extraction to meet inclusion criteria. The risk of bias was medium as only cases meeting defined follow-up were included. 73 cases (N) were included: 34 qualified for Group I and 39 for Group II. Quantitative synthesis of individual case data demonstrated significantly higher complication rate in Group I compared to Group II (23.5% vs 5.1%) (RR 4.6, 95% CI 1.04-20.1). No significant differences were observed between groups for infectious complications, mechanical complications, nonunion, or dehiscence. Reoperation was required significantly more often for Group I (P = .043).

Conclusions

For MAFs involving the third molar, concomitant extraction of unerupted as well as retention of partially erupted third molars increases risk of complications with Champy fixation technique. For these patients, alternative strategies for fixation should be considered.

One miniplate versus two miniplates in the fixation of mandibular angle fractures. An updated systematic review and meta-analysis

PURPOSE

The aim of this study is to compare the outcomes after using one miniplate fixation in the external oblique ridge versus two miniplate fixation for mandibular angle fractures.

METHODS

A systematic review of MEDLINE (via PubMed), Scopus and Cochrane Library database was performed (last search date: 04 February 2022) according to the PRISMA guidelines. The research question was addressed using the PICO criteria. Only comparative studies between the two techniques were included. Random-effects model meta-analyses were performed.

RESULTS

Seventeen studies, comprising a total of 1667 patients, 846 undergoing one miniplate fixation and 854 undergoing two miniplate fixation for mandibular angle fractures were identified. No statistically significant differences were observed regarding surgical site infection (odds ratio [OR]= 0.94, 95% confidence interval [CI]: [0.69] - [1.28], p = 0.68, I²=0.00%), post-operative malocclusion (OR= 0.97, 95% CI: [0.53] - [1.18], p = 0.25, I²=0.00%), post-operative neurosensory dysfunction (OR= 0.67, 95% CI: [0.37] - [1.22], p = 0.19, I²=73.93%), pseudoarthrosis formation (OR=0.90, 95% CI: [0.58] - [(1.39], p = 0.63, I²=0.00%). Wound dehiscence was marginally less common in the one miniplate group (OR=0.52, 95% CI: [0.28] - [0.98], p = 0.04, I²=54.34%). The probability of scarring formation (OR=0.13, 95% CI: [0.05] - [0.32], p = 0.00, I²=0.00%) and hardware failure (OR=0.36, 95% CI [0.21] - [0.62], p = 0.00, I²=29.33%) were statistically significantly higher in the two miniplates arm.

CONCLUSION

One miniplate fixation and two miniplates fixation of mandibular angle fractures have similar results regarding post operative infection, malocclusion, neurosensory dysfunction and pseudoarthrosis formation while wound dehiscence, hardware failure and scarring seem to be more common when two miniplates are used as a fixation technique.

Transbuccal vs. Intraoral Approach using an Angulated Screwdriver in Fixation of a Mandibular Angle Fracture

Objectives:

This study aimed to evaluate surgical stability and cosmetic outcomes in patients with mandibular angle fractures (MAFs) using an angled screwdriver (ASD) versus transbuccal trocar (TBT) for single locking plate fixation.

Methods:

A prospective cohort clinical study was done on 44 male patients (88%) and 6 (12% females patients with MAFs, categorized into 2 groups. Group A patients were treated with strictly intraoral vestibular incision using an angulated screwdriver; group B was treated with TBT. Both groups placed a single locking 2.0 mm mini-plates at the inferior border. The main outcome variables were the perioperative complication rate.

Results:

There were no statistical differences between both groups regarding postoperative wound dehiscence, screw or/and plate looseness, infection rate, and inferior dental nerve injury. The study (ASD) approach took 28.10±3.3minutes, while the TBT approach took 37.40±1.75minutes, indicating a highly significant difference in operating time (P=0.001). Post-operative edema had decreased significantly in the ASD group.

Conclusion:

According to the present results, a strictly intraoral approach for ASD enabled stable fixation of MAFs using a single mini-locking plate. This can significantly reduce operation time and postoperative edema and prevent extraoral scarring.

Impacted lower third molar relationship with mandibular angle fracture complications

INTRODUCTION

Mandibular angle fractures are very common and are associated with the highest risk of complications. The aim of this study is to evaluate the correlation between impacted lower third molar and mandibular angle fracture complications.

MATERIAL AND METHODS

All patients presenting with a mandibular angle fracture and at least 2 months follow up were retrospectively included. The following complications were recorded: post-traumatic malocclusion, mouth opening limitation, inferior alveolar nerve hypoesthesia, infection, delayed union, hardware loosening. The patients were divided in two groups: impacted lower third molar or erupted/absent lower third molar.

RESULTS

A total of 68 patients were included, lower third molar was impacted in 36 cases and erupted/absent in 32 cases. 40 complications were recorded in 27 patients at 2 months. No statistically significant difference could be found about malocclusion, mouth opening limitation and inferior alveolar nerve hypoesthesia. A lower rate of persistent inferior alveolar nerve hypoesthesia (p = 0.0557) in patients with impacted lower third molar (19.4%) was observed compared to patients without impacted lower third molar (40.6%). There was no occurrence of delayed union and hardware loosening in impacted lower third molar group, whereas 5 delayed unions and 4 hardware loosening were recorded in erupted/absent lower third molar group. Finally, the rate of patients with at least one of the 6 complications is significantly higher in the erupted/absent lower third molar group (17/32, 53.1%) than in the impacted lower third molar group (10/36, 27.8%), p = 0.033.

DISCUSSION

The risk of overall complication is decreased when lower third molar is impacted in mandibular angle fracture. This supports the idea of a role of the impacted lower third molar in fracture reduction and stability.

Analysis of Complication in Mandibular Angle Fracture: Champy Technique Versus Rigid Fixation

INTRODUCTION

The mandibular angle endures tension and compression during mastication, and proper internal fixation is essential when a fracture occurs. The authors analyzed the complication rate between Champy technique and rigid fixation, used in the treatment of mandibular angle fracture.

METHODS

The retrospective study included patients with mandibular angle fracture in single center, from January 2003 to December 2019. The patients were categorized into 2 groups by fixation method of angle fracture: Champy technique which uses single miniplate and rigid fixation which uses multiple miniplate, reconstruction plate, compression plate, lag screw, and wire. Pearson chi-square test was used to analyze the complication rates.

RESULTS

A total of 64 patients met inclusion criteria. Thirty-four patients had isolated angle fractures and 30 patients had multiple mandibular fractures. In isolated angle fracture, there were no significant differences in all complications between the Champy technique group and rigid fixation group. In multiple mandibular fractures, there were no significant differences in all complications between 2 groups.

CONCLUSIONS

For isolated angle fractures, Champy technique is a reliable treatment method. Additionally, in case of multiple mandibular fractures, Champy technique is an effective fixation method in angle fractures when proper rigid fixation is performed for accompanying fractures.

Is Outpatient Management of Mandibular Fractures Associated With Inflammatory Complications? An ACS-NSQIP Study

PURPOSE

Timing of mandibular fracture repair has long been debated. The purpose of the present study was to assess the incidence of postoperative inflammatory complications (POICs) following open repair of mandibular fractures managed non-urgently in the outpatient setting versus urgently in the inpatient setting.

METHODS

The authors utilized the American College of Surgeons National Surgical Quality Improvement Program (ACS-NSQIP) database to enroll a sample of patients with mandibular fractures who underwent open repair. The primary independent variable was treatment protocol: outpatient (elective) versus inpatient (urgent/non-elective). The primary dependent variable was POIC (yes/no). Descriptive, bivariate, and multiple logistic regression statistics were utilized to evaluate the relationship between treatment protocol and POICs.

RESULTS

The study cohort was comprised of 1,848 subjects with 1,134 outpatients and 714 inpatients. The incidence of POICs was 6.53% for the outpatient group compared to 8.96% for the inpatient group, with no significant difference between groups (P= .052). However, subjects treated as inpatients were 1.51 times more likely to experience any complication (P = .008) due to an increase in non-POICs (P = .028), in particular urinary tract infections (P = .035). After adjusting for age, hypertension requiring medical treatment, and smoking, classification as ASA II (P = .046, OR = 2.21, 95% CI 1.01 to 4.83), ASA III (P = .020, OR = 2.88, 95% CI 1.18 to 7.02), diabetes (P = 0.004, OR = 3.11, 95% CI 1.43 to 6.74), and preoperative hematocrit (P = 0.010, OR = 0.950, 95% CI 0.913 to 0.988) were independent predictors of POICs. Length of stay was 0.83 ± 2.61 days compared to 2.36 ± 3.63 days for the outpatient and inpatient groups, respectively (P ≤ .001).

CONCLUSIONS

There was no significant difference in POICs between patients treated as outpatients versus inpatients, though outpatients had fewer non-POICs and a shorter length of hospital stay.

The Influence of the Gonial Angle on the Initial Biomechanical Stability of the Plate Osteosynthesis in Polyurethane Mandibles With Angle Fractures

The aim of the present study was to examine the biomechanical stability of the mandibular angle fractures (MAF) fixated with standard titanium miniplates in polyurethane models with different gonial angles (GA). Three custom molds were prepared for 3-dimensional printed mandibles with low, normal and high GA. Twenty polyurethane replicas were cast per group and standard MAFs were created on each sample. Fractures were stabilized with 1 4-hole standard titanium miniplate inserted over the superior alveolar border. Half of the samples were subjected to molar loading and the other half to the incisal loading up until 150 N force magnitude. The load-displacement curves and the horizontal moment arms were recorded and analyzed. The samples with high GA demonstrated greater displacement than those with normal and low GA during molar loading (P < 0.05 for both). After correcting for the effects of the moment arm, the incisal loading also resulted in higher mean displacement in the high GA group than the others (P < 0.05 for both) and the normal GA samples showed higher displacement after 100 N level compared to those in low GA (P < 0.05). Within the limits of this in vitro study, it can be concluded that the MAFs of the polyurethane mandibles with high GA fixated with 1 standard monocortical plate are more likely to demonstrate higher displacement values under the effects of the molar and incisal loadings than do the mandibles with normal and low GA.