Electrodeposition of manganese dioxide: effect of quaternary amines

Xerogel-Derived Manganese Oxide/N-Doped Carbon as a Non-Precious Metal-Based Oxygen Reduction Reaction Catalyst in Microbial Fuel Cells for Energy Conversion Applications

Current study provides a novel strategy to synthesize the nano-sized MnO nanoparticles from the quick, ascendable, sol-gel synthesis strategy. The MnO nanoparticles are supported on nitrogen-doped carbon derived from the cheap sustainable source. The resulting MnO/N-doped carbon catalysts developed in this study are systematically evaluated via several physicochemical and electrochemical characterizations. The physicochemical characterizations confirms that the crystalline MnO nanoparticles are successfully synthesized and are supported on N-doped carbons, ascertained from the X-ray diffraction and transmission electron microscopic studies. In addition, the developed MnO/N-doped carbon catalyst was also found to have adequate surface area and porosity, similar to the traditional Pt/C catalyst. Detailed investigations on the effect of the nitrogen precursor, heat treatment temperature, and N-doped carbon support on the ORR activity is established in 0.1 M of HClO4. It was found that the MnO/N-doped carbon catalysts showed enhanced ORR activity with a half-wave potential of 0.69 V vs. RHE, with nearly four electron transfers and excellent stability with just a loss of 10 mV after 20,000 potential cycles. When analyzed as an ORR catalyst in dual-chamber microbial fuel cells (DCMFC) with Nafion 117 membrane as the electrolyte, the MnO/N-doped carbon catalyst exhibited a volumetric power density of ~45 mW m2 and a 60% degradation of organic matter in 30 days of continuous operation.

Role of Additives in Electrochemical Deposition of Ternary Metal Oxide Microspheres for Supercapacitor Applications

A simple two-step approach has been employed to synthesize a cobalt-nickel-copper ternary metal oxide, involving electrochemical precipitation/deposition followed by calcination. The ternary metal hydroxide gets precipitated/deposited from a nitrate bath at the cathode in the catholyte chamber of a two-compartment diaphragm cell at room temperature having a pH ≈ 3. The microstructure of the ternary hydroxides was modified in situ by two different surfactants such as cetyltrimethylammonium bromide and dodecyltrimethylammonium bromide in the bath aiming for enhanced storage performance in the electrochemical devices. The effect of the surfactant produces a transition from microspheres to nanosheets, and the effect of micelle concentration produces nanospheres at a higher ion concentration. The ternary hydroxides were calcined at 300 °C to obtain the desired ternary mixed oxide materials as the electrode for hybrid supercapacitors. X-ray diffraction analysis confirmed the formation of the ternary metal oxide product. The scanning electron microscopy images associated with energy-dispersive analysis suggest the formation of a nanostructured porous composite. Ternary metal oxide in the absence and presence of a surfactant served as the cathode and activated carbon served as the anode for supercapacitor application. DTAB-added metal oxide showed 95.1% capacitance retention after 1000 cycles, achieving 188 F/g at a current density of 0.1 A/g, and thereafter stable until 5000 cycles, inferring that more transition metals in the oxide along with suitable surfactants at an appropriate micellar concentration may be better for redox reactions and achieving higher electrical conductivity and smaller charge transfer resistance. The role of various metal cations and surfactants as additives in the electrolytic bath has been discussed.

Probing the electrochemical properties of biopolymer modified EMD nanoflakes through electrodeposition for high performance alkaline batteries

In the present work, a novel biopolymer approach has been made to electrodeposit manganese dioxide from manganese sulphate in a sulphuric acid bath containing chitosan in the absence and presence of glutaraldehyde as a cross-linking agent. Galvanostatically synthesised electrolytic manganese dioxide (EMD) nanoflakes were used as electrode materials and their electrochemical properties with the influence of biopolymer chitosan were systematically characterized. The structural determination, surface morphology and porosity of nanostructured EMD were evaluated using X-ray diffraction, Fourier transform infrared spectroscopy, field emission scanning electron microscopy and nitrogen adsorption-desorption techniques. The results obtained were compared with that of blank EMD (polymer free). The results indicated that the EMD having chitosan cross-linked with glutaraldehyde possesses a reduced particle size and more porous structure than the blank and EMDs synthesized in the presence of chitosan but without glutaraldehyde. The results revealed that chitosan was unable to play any significant role on its own but chitosan in the presence of glutaraldehyde forms a cross-linking structure, which in turn influences the nucleation and growth of the EMDs during electrodeposition. EMDs obtained in the presence of chitosan (1 g dm(-3)) and glutaraldehyde (1% glutaraldehyde) exhibited a reversible and better discharge capacity upon cycling than the blank which showed its typical capacity fading behaviour with cycling. In addition, EMD synthesized in the presence of 1 g dm(-3) chitosan and 2% glutaraldehyde exhibited a superior electrochemical performance than the blank and lower amounts (1%; 1.5%) of glutaraldehyde, showing a stable discharge capacity of 60 mA h g(-1) recorded up to 40 cycles in alkaline KOH electrolyte for a Zn-MnO2 system. Our results demonstrate the potential of using polymer modified EMDs as a new generation of alkaline battery materials. The XPS data show that a surface functional moiety arising from the cross-linked chitosan enhances the electrochemical properties of the Zn-MnO2 system.

Electrodeposition of Pluronic F127 assisted rod-like EMD/carbon arrays for efficient energy storage

In the traditional Duracell battery, the results obtained to date remain marginal in terms of cyclability. The development of the existing Zn-MnO2 with superior electrochemical performance for use in alkaline rechargeable batteries is reported. Electrolytic manganese dioxide (EMD) was synthesized from a conventional manganese sulphate bath but having a unique non-ionic surfactant (Pluronic F127), and activated carbon, in an electrolytic cell. The surface areas and morphologies of the as-prepared EMDs were influenced by the presence of these novel additives in the solution while the X-ray data revealed that there was no noticeable change in the crystal orientations thus all the EMDs were structurally similar. The synergistic effect of the optimal ratio of surfactant to carbon powder produced rod-like arrays exhibiting a larger surface area, which facilitates ion transport for better energy storage. It is interesting to note that EMD deposited in the presence of F127 showed better cyclability whereas in the presence of carbon, although it showed better storage capability, it was endowed with poor efficiency when compared with the surfactant added sample, nevertheless the results are better than the existing Zn-MnO2 technology (additive free EMD). Therefore, both the surfactant (50 mg dm(-3)) and the activated carbon (5 g dm(-3)) have been added together in the bath and the resultant EMD exhibits a high specific capacity and an excellent cycling stability. Moreover, the presence of surfactant and activated carbon improved the discharge capacity and its retention thus making this alkaline technology feasible for storing renewable energy for future use. The synergistic effect and the mechanism involved have been discussed.

Electrolytic manganese dioxide (EMD): a perspective on worldwide production, reserves and its role in electrochemistry

EMD – a weird but played wonderful role in electrochemistry and its intercalation mechanism suitable for alkaline rechargeable batteries and supercapacitors.