Boron doping and structure control of carbon materials for supercapacitor application: the effect of freeze-drying and air-drying for porosity engineering

Solvent self-doping synthesis of nitrogen/oxygen co-doped porous carbon from cellulose as high performance material for multipurpose energy storage

Developing novel heteroatoms co-doped biomass porous carbon with low-cost, tunable physical/chemical properties, and environmental friendliness is an important candidate to face energy shortage and environmental pollution currently. Herein, a novel solvothermal avenue was designed using triethanolamine as self-doping solvent to treat rice straw powders with KOH. The rice straw with triethanolamine derived carbon (RSTCs-1) possessed hierarchical porous structure, N/O diatomic doping, and large specific surface area. The electrochemical energy storage performance of RSTCs-1 was evaluated in the systems of supercapacitors, aqueous zinc ion hybrid supercapacitors (AZHSs), and lithium-ion batteries (LIBs) respectively. As the results, the RSTCs-1 based symmetric supercapacitor exhibited the maximum energy density of ca. 98.4 Wh·kg-1 with the excellent cycling stability. Moreover, both RSTCs-1 AZHSs and RSTCs-1 LIBs achieved the relative high discharge specific capacities of ca. 407.1 and 1906.7 mAh·g-1 at current density of 0.1 A·g-1. These results highlighted the huge potential of the obtained with notable electrochemical performance acting as multifunctional electrode material for the different energy storage devices.

B, P, and S heteroatom doped, bio- and hemo-compatible 2D graphitic-carbon nitride (g-C3N4) with antioxidant, light-induced antibacterial, and bioimaging endeavors

The synthesis of two-dimensional (2D) graphiticg-C3N4and heteroatom-doped graphitic H@g-C3N4(H: B, P, or S) particles were successfully done using melamine as source compounds and boric acid, phosphorous red, and sulfur as doping agents. The band gap values of 2Dg-C3N4, B50@g-C3N4, P50@g-C3N4, and S50@g-C3N4structures were determined as 2.90, 3.03, 2.89, and 2.93 eV, respectively. The fluorescent emission wavelengths of 2Dg-C3N4, B50@g-C3N4, P50@g-C3N4, and S50@g-C3N4structures were observed at 442, 430, 441, and 442 nm, respectively upon excitation atλEx= 325 nm. There is also one additional new emission wavelength was found at 345 nm for B50@g-C3N4structure. The blood compatibility test results ofg-C3N4, B50@g-C3N4, P50@g-C3N4, and S50@g-C3N4structures revealed that all materials are blood compatible with <2% hemolysis and >90% blood clotting indices at 100μg ml-1concentration. The cell toxicity of the prepared 2D graphitic structures were also tested on L929 fibroblast cells, and even the heteroatom doped hasg-C3N4structures induce no cytotoxicity was observed with >91% cell viability even at 250μg ml-1particle concentration with the exception of P50@g-C3N4which as >75 viability. Moreover, for 2Dg-C3N4, B50@g-C3N4, and S50@g-C3N4constructs, even at 500μg ml-1concentration, >90% cell viabilities was monitored. As a diagnostic material, B50@g-C3N4was found to have significantly high penetration and distribution abilities into L929 fibroblast cells granting a great potential in fluorescence imaging and bioimaging applications. Furthermore, the elemental doping with B, P, and S ofg-C3N4were found to significantly increase the photodynamic antibacterial activity e.g. more than half of bacterial elimination by heteroatom-doped forms ofg-C3N4under UVA treatment was achieved.

Facile synthesis of crumpled nitrogen-doped porous carbon nanosheets with ultrahigh surface area for high-performance supercapacitors

Porous carbon nanosheets are currently considered excellent electrode materials for high-performance supercapacitors. However, their ease of agglomeration and stacking nature reduce the available surface area and limit the electrolyte ion diffusion and transport, thereby leading to low capacitance and poor rate capability. To solve these problems, we report an adenosine blowing and KOH activation combination strategy to prepare crumpled nitrogen-doped porous carbon nanosheets (CNPCNS), which exhibit much higher specific capacitance and rate capability compared to flat microporous carbon nanosheets. The method is simple and capable of one-step scalable production of CNPCNS with ultrathin crumpled nanosheets, ultrahigh specific surface area (SSA), microporous and mesoporous structure and high heteroatom content. The optimized CNPCNS-800 with a thickness of 1.59 nm has an ultrahigh SSA of 2756 m² g^-1, high mesoporosity of 62.9% and high heteroatom content (2.6 at% for N, 5.4 at% for O). Consequently, CNPCNS-800 presents an excellent capacitance, high rate capability and long cycling stability both in 6 M KOH and EMIMBF₄. More importantly, the energy density of the CNPCNS-800-based supercapacitor in EMIMBF₄ can reach up to 94.9 W h kg^-1 at 875 W kg^-1 and is still 61.2 W h kg^-1 at 35 kW kg^-1.

Intumescent flame retardants inspired template-assistant synthesis of N/P dual-doped three-dimensional porous carbons for high-performance supercapacitors

Heteroatom-doped three-dimensional (3D) porous carbons possess great potential as promising electrodes for high-performance supercapacitors. Inspired by the inherent features of intumescent flame retardants (IFRs) with universal availability, rich heteroatoms and easy thermal-carbonization to form porous carbons, herein we proposed a self-assembling and template self-activation strategy to produce N/P dual-doped 3D porous carbons by nano-CaCO₃ template-assistant carbonization of IFRs. The IFRs-derived carbon exhibited large specific surface area, well-balanced hierarchical porosity, high N/P contents and interconnected 3D skeleton. Benefitting from these predominant characteristics on structure and composition, the assembled supercapacitive electrodes exhibited outstanding electrochemical performances. In three-electrode 6 M KOH system, it delivered high specific capacitances of 407 F g^-1 at 0.5 A g^-1, and good rate capability of 61.2% capacitance retention at 20 A g^-1. In two-electrode organic EMIMBF₄/PC system, its displayed high energy density of 62.8 Wh kg^-1 at a power density of 748.4 W kg^-1, meanwhile it had excellent cycling stability with 84.7% capacitance retention after 10,000 cycles. To our best knowledge, it is the first example to synthesize porous carbon from IFRs precursor. Thus, the current work paved a novel and low-cost way for the production of high-valued carbon material, and expanded its application for high-performance energy storage devices.

Doping strategy, properties and application of heteroatom-doped ordered mesoporous carbon

To date, tremendous achievements have been made to produce ordered mesoporous carbon (OMC) with well-designed and controllable porous structure for catalysis, energy storage and conversion. However, OMC as electrode material suffers from poor hydrophilicity and weak electrical conductivity. Numerous attempts and much research interest have been devoted to dope different heteroatoms in OMC as the structure defects to enhance its performance, such as nitrogen, phosphorus, sulphur, boron, and multi heteroatoms. Unfortunately, the "how-why-what" question for the heteroatom-doped OMC has not been summarized in any published reports. Therefore, this review focuses on the functionalization strategies of heteroatoms in OMC and the corresponding process characteristics, including in situ method, post treatment method, and chemical vapor deposition. The fundamentally influencing mechanisms of various heteroatoms in electrochemical property and porous structure are summarized in detail. Furthermore, this review provides an updated summary about the applications of different heteroatom-doped OMC in supercapacitor, electrocatalysis, and ion battery during the last decade. Finally, the future challenges and research strategies for heteroatom-doped OMC are also proposed.

Tailorable boron-doped carbon nanotubes as high-efficiency counter electrodes for quantum dot sensitized solar cells

1. Tunable BCNTs are prepared by the pre-oxidation strategy. 2. B-Doped CNTs exhibit excellent activity for S_n²⁻ reduction. 3. The QDSSC based on CdS/CdSe QDs and BCNT1 shows a PCE of 4.55% under one sunlight illumination.