Novel photosensitizer for dye-sensitized solar cell based on ionic liquid–doped blend polymer electrolyte

Synthesis And Photovoltaic Performance of Carbazole (Donor) Based Photosensitizers in Dye-Sensitized Solar Cells (DSSC): A Review

Carbazoles are nitrogen-containing aromatic heterocycles, having widespread applications in the field of photovoltaics. Carbazole-based photosensitizers have tunable features for absorption on semi-conductor (tellurium dioxide or zinc oxide) layers to create sufficient push-pull force in the conversion of sunlight into electrical energy, thus presenting as promising heterocyclic donor candidates to be used in dye-sensitized solar cells. For the synthesis of these dyes, various structural designs are available, namely, D-A, D-π-A, D-D-π-A, D-A-π-A, A-π-D-π-A-π-A, and D2-π-A that all involve incorporating carbazole as a donor (D), along with spacer (π-extender) moieties, such as thiophene, phenol, ethynylene, nitromethane, azine, thiadiazole, or acetonitrile. Additionally, acceptors (A) employed in the designs include cyanoacrylic acids, carboxylic acids, malononitrile, rhodanine-3-acetic acid, 4-aminobenzoic acid, or 4-amino salicylic acid. This comprehensive review explores the synthesis and photovoltaic performances of numerous carbazole-based photosensitizers tailored for dye-sensitized solar cells, covering the period of 2019-2023.

Structural, Optical, and Electrical Parameters of Doped PVA/PVP Blend with TPAI or THAI Salt

The 70% polyvinyl alcohol/30% polyvinyl pyrrolidone (PVA/PVP) polymer blends, with different weight ratios of tetrapropylammonium iodide (TPAI) or tetrahexylammonium iodide (THAI) salt, were prepared using dimethyl sulfoxide (DMSO) as a solvent. The X-ray diffraction technique was used to trace the crystalline nature of the formed blends. The SEM and EDS techniques were applied to figure out the morphology of the blends. The variation in the FTIR vibrational bands was used to investigate the chemical composition and the effect of different salt doping on the functional groups of the host blend. The influence of the salt type (TPAI or THAI) and its ratio on the linear and nonlinear optical parameters for the doped blends were investigated in detail. Absorbance and reflectance are highly enhanced in the UV region reaching a maximum for the blend with 24% TPAI or THAI; so, it can be employed as shielding materials for UVA and UVB types. The direct (5.1 eV) and indirect (4.8 eV) optical bandgaps were reduced continuously to (3.52, 3.63 eV) and (3.45, 3.51 eV) while increasing the content of TPAI or THAI, respectively. The blend doped with 24% wt TPAI exhibited the highest refractive index (around 3.5 in 400-800 nm). The DC conductivity is affected by the content and type of salt, its dispersion, and blend-salt interaction. The activation energies of different blends were obtained by applying the Arrhenius formula.

Biosynthesis, characterization and optimization of TiO2 nanoparticles by novel marine halophilic Halomonas sp. RAM2: application of natural dye-sensitized solar cells

BACKGROUND

Metal oxide nanoparticles (NPs) are becoming valuable due to their novel applications. The green synthesis of TiO2 NPs is more popular as a flexible and eco-friendly method compared to traditional chemical synthesis methods. TiO2 NPs are the most commonly used semiconductor in dye-sensitized solar cells (DSSCs).

RESULTS

The biogenic TiO2 NPs were produced extracellularly by the marine halophilic bacterium Halomonas sp. RAM2. Response surface methodology (RSM) was used to optimize the biosynthesis process, resulting in a starting TiO2 concentration of 0.031 M and a pH of 5 for 92 min (⁓15 nm). TiO2 NPs were well-characterized after the calcination process at different temperatures of 500, 600, 700 and 800 °C. Anatase TiO2 NPs (calcined at 500 °C) with a smaller surface area and a wider bandgap were nominated for use in natural dye-sensitized solar cells (NDSSCs). The natural dye used as a photosensitizer is a mixture of three carotenoids extracted from the marine bacterium Kocuria sp. RAM1. NDSSCs were evaluated under standard illumination. After optimization of the counter electrode, NDSSCBio(10) (10 layers) demonstrated the highest photoelectric conversion efficiency (η) of 0.44%, which was almost as good as NDSSCP25 (0.55%).

CONCLUSION

The obtained results confirmed the successful green synthesis of TiO2 NPs and suggested a novel use in combination with bacterial carotenoids in DSSC fabrication, which represents an initial step for further efficiency enhancement studies.

New Luminescent Pyridine-based Disc type Molecules: Synthesis, Photophysical, Electrochemical, and DFT studies

The design and synthesis of new conjugated luminescent molecules have attracted the attention of researchers because of their various applications, especially in the field of optoelectronic devices. Most of the applications were mainly based on the intramolecular charge transfer (ICT). For this purpose, we designed and synthesized a series of new donor-acceptor based disc type molecules i.e. 2,4,6-tris(4-(alkyloxy)phenyl)pyridines carrying variable alkoxy chains [i.e. n = 2, 4, 6, 8, 10, 12, 14, 16]. Further, the structures of all the synthesized compounds were confirmed by using ATR-IR, ¹H-NMR, ¹³C-NMR, and ESI-MS analysis. Moreover, the photophysical property study indicated that all the molecules are blue light emitting materials, however the change of alkoxy chain length in phenyl arms does not affect their absorption, emission, and energy levels. Besides, the thermal study revealed that core is stable up to 350 °C. Also, the DFT study showed that the photo induced electron transfer caused by HOMO-LUMO excitation in the studied molecules. Therefore, all the molecules have potential applications in optoelectronic applications.

Photosensitization of fucoxanthin-graphene complexes: A computational approach

Photosensitization of fucoxanthin-graphene (FX-GR) complexes were investigated in this work for detecting their roles of irradiating energy absorptions. To this aim, density functional theory (DFT computational approach as employed to obtain the optimized structures and their corresponding molecular orbital features. Both of original linear models of FX and its broken models, LFX and RFX, were investigated for attaching to a brigading GR molecular model. In this regard, the models were optimized to obtain the minimized energy configurations, in which for double-attachment of FG to the GR coroner atoms, Cis and Trans configurations were obtained for the FX-GR complex models. Based on the obtained achievements of molecular orbitals photosensitization features, the models were varied by the absorbed wavelengths making them suitable for various applications. In this regard, both of shorter and longer irradiated wavelengths were applicable for the purpose.

Synthesis and characterization of a new phenothiazine-based sensitizer/co-sensitizer for efficient dye-sensitized solar cell performance using a gel polymer electrolyte and Ni–TiO2 as a photoanode

Efficiency enhancement of a DSSC using a metal-free co-sensitizer, Ni–TiO2 photoanode, and blend gel polymer electrolyte.

Cobalt and Carbon Complex as Counter Electrodes in Dye-Sensitized Solar Cells

We developed cobalt and carbon complex materials as counter electrodes (CEs) for dye-sensitized solar cells (DSSCs) to replace conventional platinum (Pt) CEs. Co12 and Co15, both of which are basic cobalt derivatives, showed good redox potential with a suitable open-circuit voltage (VOC); however, their poor electrical conductivity engendered a low short-circuit current (JSC) and fill factor (FF). Mixing them with carbon black (CB) improved the electrical conductivity of the CE; in particular, JSC and FF were considerably improved. Further improvement was achieved by combining cobalt derivatives and CB through thermal sintering to produce a novel CoCB material as a CE. CoCB had good electrical conductivity and electrocatalytic capability, and this further enhanced both JSC and VOC. The optimized device exhibited a power conversion efficiency (PCE) of 7.44%, which was higher than the value of 7.16% for a device with a conventional Pt CE. The conductivity of CoCB could be further increased by mixing it with PEDOT:PSS, a conducting polymer. The device’s JSC increased to 18.65 mA/cm2, which was considerably higher than the value of 14.24 mA/cm2 for the device with Pt CEs. The results demonstrate the potential of the cobalt and carbon complex as a CE for DSSCs.