Prediction of wall stress and oxygen flow in patient-specific abdominal aortic aneurysms: the role of intraluminal thrombus

Serum Creatinine Level in Relation to Intraluminal Thrombus and Abdominal Aortic Aneurysm Size

Objectives: Abdominal aortic aneurysm (AAA) diameter is the primary predictor of AAA rupture. However, smaller aneurysms do rupture, and other parameters are required for a more nuanced risk stratification. Reduced renal function is associated with increased cardiovascular risk and thrombosis, but the impact of renal function on ILT and AAA size remains unknown. This study aimed to investigate the association between creatinine level and volume of ILT and AAA. Methods: In a cross-sectional study, 184 patients with AAA under ultrasound surveillance were included. ILT volume and thickness, and AAA volume and diameter, were measured using three-dimensional contrast-enhanced ultrasound. ILT and AAA measures were compared with creatinine levels. Results: No associations were found between creatinine level and ILT or AAA volume (p = 0.18 and p = 0.41). There were no differences in ILT volume between patients with normal and elevated creatinine levels, when adjusting for AAA size and comorbidities (p = 0.06 and p = 0.54). A positive association was found between ILT volume and AAA volume (p < 0.001). Creatinine level did not influence this association (p = 0.06). Conclusions: In this study, creatinine level did not seem associated with ILT or AAA volume. Longitudinal studies are required to elucidate associations between renal function, clinical outcomes, and ILT and AAA development.

Fluid-structure interaction analysis for abdominal aortic aneurysms: the role of multi-layered tissue architecture and intraluminal thrombus

Introduction

Abdominal aortic aneurysm (AAA) is a life-threatening disease marked by localized dilatations of the infrarenal aortic wall. While clinical guidelines often use the aneurysm diameter as an indicator for surgical intervention, this metric alone may not reliably predict rupture risks, underscoring the need for detailed biomechanical analyses to improve risk assessments.

Methods

We investigate the effects of the multi-layered tissue architecture and the intraluminal thrombus (ILT) on the wall stress distribution of AAA. Using fluid-structure interaction, we analyze the biomechanical responses of fusiform and saccular AAAs under three conditions: without ILT, with ILT but no tissue degradation, and with both ILT and tissue degradation.

Results

The findings show that the media is the primary load-bearing layer, and the multi-layered model yields a more accurate stress profile than the single-layered tissue model. The ILT substantially reduces overall stress levels in the covered tissue, although its impact on the location of peak stress varies across different scenarios. Media degradation increases the stress in the intima and adventitia, but the cushioning effect of ILT largely mitigates this impact.

Discussion

The results underscore the importance of incorporating the multi-layered tissue architecture and ILT in patient-specific analyses of AAA. These factors may improve the predictive capabilities of biomechanical assessments for rupture risk.

A Comprehensive Review on Computational Analysis, Research Advances, and Major Findings on Abdominal Aortic Aneurysms for the Years 2021 to 2023

BACKGROUND

Abdominal aortic aneurysm (AAA) is a pathological condition characterized by the dilation of the lower part of the aorta, where significant hemodynamic forces are present. The prevalence and high mortality risk associated with AAA remain major concerns within the scientific community. There is a critical need for extensive research to understand the underlying mechanisms, pathophysiological characteristics, and effective detection methods for abdominal aortic abnormalities. Additionally, it is imperative to develop and refine both medical and surgical management strategies. This review aims to indicate the role of computational analysis in the comprehension and management of AAAs and covers recent research studies regarding the computational analysis approach conducted between 2021 and 2023. Computational analysis methods have emerged as sophisticated and noninvasive approaches, providing detailed insights into the complex dynamics of AAA and enhancing our ability to study and manage this condition effectively.

METHODS

Computational analysis relies on fluid mechanics principles applied to arterial flow, using the Navier-Stokes equations to model blood flow dynamics. Key hemodynamic indicators relevant to AAAs include Time-Average Wall Shear Stress, Oscillatory Shear Index, Endothelial Cell Activation Potential, and Relative Residence Time. The primary methods employed for simulating the abdominal aorta and studying its biomechanical environment are computational fluid dynamics and Finite Element Methods. This review article encompasses a thorough examination of recent literature, focusing on studies conducted between 2021 and 2023.

RESULTS

The latest studies have elucidated crucial insights into the blood flow characteristics and geometric attributes of AAAs. Notably, blood flow patterns within AAAs are associated with increased rupture risk, along with elevated intraluminal thrombus volume and specific calcification thresholds. Asymmetric AAAs exhibit heightened risks of rupture and thrombus formation due to low and oscillating wall shear stresses. Moreover, larger aneurysms demonstrate increased wall stress, pressure, and energy loss. Advanced modeling techniques have augmented predictive capabilities concerning growth rates and surgical thresholds. Additionally, the influence of material properties and thrombus volume on wall stress levels is noteworthy, while inlet velocity profiles significantly modulate blood flow dynamics within AAAs.

CONCLUSIONS

This review highlights the potential utility of computational modeling. However, the clinical applicability of computational modeling has been limited by methodological variability despite the ongoing accumulation of evidence supporting the prognostic significance of biomechanical and hemodynamic indices in this field. The establishment of standardized reporting is critical for clinical implementation.

Computational Study of Abdominal Aortic Aneurysm Walls Accounting for Patient-Specific Non-Uniform Intraluminal Thrombus Thickness and Distinct Material Models: A Pre- and Post-Rupture Case

An intraluminal thrombus (ILT) is present in the majority of abdominal aortic aneurysms, playing a crucial role in their growth and rupture. Although most computational studies do not include the ILT, in the present study, this is taken into account, laying out the whole simulation procedure, namely, from computed tomography scans to medical image segmentation, geometry reconstruction, mesh generation, biomaterial modeling, finite element analysis, and post-processing, all carried out in open software. By processing the tomography scans of a patient's aneurysm before and after rupture, digital twins are reconstructed assuming a uniform aortic wall thickness. The ILT and the aortic wall are assigned different biomaterial models; namely, the first is modeled as an isotropic linear elastic material, and the second is modeled as the Mooney-Rivlin hyperelastic material as well as the transversely isotropic hyperelastic Holzapfel-Gasser-Ogden nonlinear material. The implementation of the latter requires the designation of local Cartesian coordinate systems in the aortic wall, suitably oriented in space, for the proper orientation of the collagen fibers. The composite aneurysm geometries (ILT and aortic wall structures) are loaded with normal and hypertensive static intraluminal pressure. Based on the calculated stress and strain distributions, ILT seems to be protecting the aneurysm from a structural point of view, as the highest stresses appear in the thrombus-free areas of the aneurysmal wall.

The mechanism and therapy of aortic aneurysms

Aortic aneurysm is a chronic aortic disease affected by many factors. Although it is generally asymptomatic, it poses a significant threat to human life due to a high risk of rupture. Because of its strong concealment, it is difficult to diagnose the disease in the early stage. At present, there are no effective drugs for the treatment of aneurysms. Surgical intervention and endovascular treatment are the only therapies. Although current studies have discovered that inflammatory responses as well as the production and activation of various proteases promote aortic aneurysm, the specific mechanisms remain unclear. Researchers are further exploring the pathogenesis of aneurysms to find new targets for diagnosis and treatment. To better understand aortic aneurysm, this review elaborates on the discovery history of aortic aneurysm, main classification and clinical manifestations, related molecular mechanisms, clinical cohort studies and animal models, with the ultimate goal of providing insights into the treatment of this devastating disease. The underlying problem with aneurysm disease is weakening of the aortic wall, leading to progressive dilation. If not treated in time, the aortic aneurysm eventually ruptures. An aortic aneurysm is a local enlargement of an artery caused by a weakening of the aortic wall. The disease is usually asymptomatic but leads to high mortality due to the risk of artery rupture.

Rupture risk parameters upon biomechanical analysis independently change from vessel geometry during abdominal aortic aneurysm growth

Objective

The indication for abdominal aortic aneurysm (AAA) repair is based on a diameter threshold. However, mechanical properties, such as peak wall stress (PWS) and peak wall rupture index (PWRI), influence the individual rupture risk. This study aims to correlate biomechanical and geometrical AAA characteristics during aneurysm growth applying a new linear transformation-based comparison of sequential imaging.

Methods

Patients with AAA with two sequential computed tomography angiographies (CTA) were identified from a single-center aortic database. Patient characteristics included age, gender, and comorbidities. Semiautomated segmentation of CTAs was performed using Endosize (Therenva) for geometric variables (diameter, neck configuration, α/β angle, and vessel tortuosity) and for finite element method A4 Clinics Research Edition (Vascops) for additional variables (intraluminal thrombus [ILT]), vessel volume, PWS, PWRI). Maximum point coordinates from at least one CTA 6 to 24 months before their final were predicted for the final preoperative CTA using linear transformation along fix and validation points to estimate spatial motion. Pearson's correlation and the t test were used for comparison.

Results

Thirty-two eligible patients (median age, 70 years) were included. The annual AAA growth rate was 3.7 mm (interquartile range [IQR], 2.25-5.44; P < .001) between CTs. AAA (+17%; P < .001) and ILT (+43%; P < .001) volume, maximum ILT thickness (+35%; P < .001), β angle (+1.96°; P = .017) and iliac tortuosity (+0.009; P = .012) increased significantly. PWS (+12%; P = .0029) and PWRI (+16%; P < .001) differed significantly between both CTAs. Both mechanical parameters correlated most significantly with the AAA volume increase (r = 0.68 [P < .001] and r = 0.6 [P < .001]). Changes in PWS correlated best with the aneurysm neck configuration. The spatial motion of maximum ILT thickness was 14.4 mm (IQR, 7.3-37.2), for PWS 8.4 mm (IQR, 3.8-17.3), and 11.5 mm (IQR, 5.9-31.9) for PWRI. Here, no significant correlation with any of the aforementioned parameters, patient age, or time interval between CTs were observed.

Conclusions

PWS correlates highly significant with vessel volume and aneurysm neck configuration. Spatial motion of maximum ILT thickness, PWS, and PWRI is detectable and predictable and might expose different aneurysm wall segments to maximum stress throughout aneurysm growth. Linear transformation could thus add to patient-specific rupture risk analysis.

Clinical Relevance

Abdominal aortic aneurysm rupture risk assessment is a key feature in future individualized therapy approaches for patients, since more and more data are obtained concluding a heterogeneous disease entity that might not be addressed ideally looking only at diameter enlargement. The approach presented in this pilot study demonstrates the feasibility and importance of measuring peak wall stress and rupture risk indices based on predicted and actual position of maximum stress points including intraluminal thrombus.