Enantioselective hydrolysis of (R)-2, 2-dimethylcyclopropane carboxamide by immobilized cells of an R-amidase-producing bacterium, Delftia tsuruhatensis CCTCC M 205114, on an alginate capsule carrier

Evaluation of acrylamide production by Rhodococcus rhodochrous (RS-6) cells immobilized in agar matrix

AIMS

The efficiency of acrylamide production was examined with immobilized cells of Rhodococcus rhodochrous (RS-6) containing NHase.

METHODS AND RESULTS

Different entrapment matrices such as agar, alginate and polyacrylamide were used. Various immobilization parameters like agar concentration, cell concentration and reaction conditions affecting the bioconversion process using suitable matrices were determined. The cells immobilized with agar matrix were found to be most effective for acrylonitrile conversion. The bioconversion was more efficient in beads prepared with 2% agar and 5% (v/v) cell concentration. The entire conversion of acrylonitrile to acrylamide with agar entrapped cells was achieved in 120 min at 15°C. The agar entrapped R. rhodochrous (RS-6) cells exhibited 8% (w/v) tolerance to acrylonitrile and 35% tolerance to acrylamide. The immobilized cells also retained 50% of its conversion ability up to seven cycles. The laboratory-scale (1 L) production resulted in 466 g L^-1 accumulation of acrylamide in 16 h.

CONCLUSIONS

The cells immobilized in agar showed better stability and biocatalytic properties and increased reusability potential.

SIGNIFICANCE AND IMPACT OF THE STUDY

The agar-immobilized Rhodococcus rhodochrous (RS-6) cells showed enhanced tolerance for both the substrate and product and is economical for the large-scale production of acrylamide.

Amidase as a versatile tool in amide-bond cleavage: From molecular features to biotechnological applications

Amidases (EC 3. 5. 1. X) are versatile biocatalysts for synthesis of chiral carboxylic acids, α-amino acids and amides due to their hydrolytic and acyl transfer activity towards the C-N linkages. They have been extensively exploited and studied during the past years for their high specific activity and excellent enantioselectivity involved in various biotechnological applications in pharmaceutical and agrochemical industries. Additionally, they have attracted considerable attentions in biodegradation and bioremediation owing to environmental pressures. Motivated by industrial demands, crystallographic investigations and catalytic mechanisms of amidases based on structural biology have witnessed a dramatic promotion in the last two decades. The protein structures showed that different types of amidases have their typical stuctural elements, such as the conserved AS domains in signature amidases and the typical architecture of metal-associated active sites in acetamidase/formamidase family amidases. This review provides an overview of recent research advances in various amidases, with a focus on their structural basis of phylogenetics, substrate specificities and catalytic mechanisms as well as their biotechnological applications. As more crystal structures of amidases are determined, the structure/function relationships of these enzymes will also be further elucidated, which will facilitate molecular engineering and design of amidases to meet industrial requirements.

Enantioselective Resolution of (R,S)-Carvedilol to (S)-(-)-Carvedilol by Biocatalysts

Among the microorganisms employed in the study, Aspergillus niger (GUFCC5443), Escherichia coli (ATCC9637), Streptomyces halstedii (CKM-2), Pseudomonas putida (NCIB9494), Cunninghamella elegans (NCIM689) and Sphingomonas paucimobilis (NCTC11030) were capable for the enantioselective conversion of racemic Carvedilol. Immobilization technique enhanced the enantioselectivity of microorganisms and thus increased the enantiomeric purity of the drug. Excellent enantiomeric ratios (E) were found in reactions catalyzed by immobilized A. niger and E. coli with values 174.44 and 104.26, respectively. Triacylglycerol lipase from Aspergillus niger was also employed in this study as a biocatalyst which resulted in the product with 83.35% enantiomeric excess (ee) and E of 11.34 while the enzyme on immobilization has yielded 99.08% ee and 216.39 E. The conversion yield (C%) of the drug by free-enzyme was 57.42%, which was enhanced by immobilization to 90.51%. Hence, our results suggest that immobilized triacylglycerol lipase from A. niger (Lipase AP6) could be an efficient biocatalyst for the enantioselective resolution of racemic Carvedilol to (S)-(-)-Carvedilol with high enantiomeric purity followed by immobilized cultures of A. niger and E. coli.

Cloning and Characterization of a Novel Esterase from Rhodococcus sp. for Highly Enantioselective Synthesis of a Chiral Cilastatin Precursor

A novel nonheme chloroperoxidase (RhEst1), with promiscuous esterase activity for enantioselective hydrolysis of ethyl (S)-2,2-dimethylcyclopropanecarboxylate, was identified from a shotgun library of Rhodococcus sp. strain ECU1013. RhEst1 was overexpressed in Escherichia coli BL21(DE3), purified to homogeneity, and functionally characterized. Fingerprinting analysis revealed that RhEst1 prefers para-nitrophenyl (pNP) esters of short-chain acyl groups. pNP esters with a cyclic acyl moiety, especially that with a cyclobutanyl group, were also substrates for RhEst1. The Km values for methyl 2,2-dimethylcyclopropanecarboxylate (DmCpCm) and ethyl 2,2-dimethylcyclopropane carboxylate (DmCpCe) were 0.25 and 0.43 mM, respectively. RhEst1 could serve as an efficient hydrolase for the bioproduction of optically pure (S)-2,2-dimethyl cyclopropane carboxylic acid (DmCpCa), which is an important chiral building block for cilastatin. As much as 0.5 M DmCpCe was enantioselectively hydrolyzed into (S)-DmCpCa, with a molar yield of 47.8% and an enantiomeric excess (ee) of 97.5%, indicating an extremely high enantioselectivity (E = 240) of this novel and unique biocatalyst for green manufacturing of highly valuable chiral chemicals.

Enzymatic production of Cilastatin intermediate via highly enantioselective hydrolysis of methyl (±)-2,2-dimethylcyclopropane carboxylate using newly isolated Rhodococcus sp. ECU1013

(S)-(+)-2,2-Dimethylcyclopropane carboxylic acid [(S)-(+)-DMCPA] is a key chiral intermediate for production of Cilastatin, an excellent renal dehydropeptidase-I inhibitor. In this study, a new method for preparation of (S)-(+)-DMCPA with microbial esterases was investigated. A microbial screening program obtained six esterase-producing isolates that could display relatively high activities and enantioselectivities using racemic ethyl 2,2-dimethylcyclopropane carboxylate (DMCPE) as screening substrate, aiming at forming optically pure (S)-(+)-DMCPA. Further selection was carried out with substrates having different alcohol moieties, including methyl, ethyl, and 2-chloroethyl esters. Finally, one of these strains, numbered ECU1013, with high enantioselectivity toward the hydrolytic resolution of methyl 2,2-dimethylcyclopropane carboxylate (DMCPM), afforded the (S)-product in 92 % ee, and was later identified as Rhodococcus sp. According to our research, there were several active esterases to DMCPM in cells of Rhodococcus sp. ECU1013; however, (S)-preferential esterase was selectively enriched based on the time-dependent profile of esterases biosynthesis, thereby the enantiomeric excess of biotransformation product (ee p) was constantly increased, finally maintained at 95 % (S). To improve the yield, various organic solvents were employed for better dispersion of the hydrophobic substrate. As a result, (±)-DMCPM of up to 400 mM in the organic phase of isooctane was enantioselectively hydrolyzed into (S)-(+)-DMCPA, with an isolation yield of 38 % and a further increase of ee p to 99 %.

Immobilization of Delftia tsuruhatensis in macro-porous cellulose and biodegradation of phenolic compounds in repeated batch process

Delftia tsuruhatensis BM90, previously isolated from Tyrrhenian Sea and selected for its ability to degrade a wide array of phenolic compounds, was immobilized in chemically modified macro porous cellulose. The development of bacterial adhesion on the selected carrier was monitored by scanning electron microscopy. Evident colonization started already after 8h of incubation. After 72h, almost all the carrier surface was covered by the bacterial cells. Extracellular bacterial structures, such as pili or fimbriae, contributed to carrier colonization and cell attachment. Immobilized cells of D. tsuruhatensis were tested for their ability to biodegrade a pool of 20 phenols in repeated batch process. During the first activation batch (72h), 90% of phenols degradation was obtained already in 48h. In the subsequent batches (up to 360h), same degradation was obtained after 24h only. By contrast, free cells were slower: to obtain almost same degradation, 48h were needed. Thus, process productivity, achieved by the immobilized cells, was double than that of free cells. Specific activity was also higher suggesting that the use of immobilized D. tsuruhatensis BM90 could be considered very promising in order to obtain an efficient reusable biocatalyst for long-term treatment of phenols containing effluents.

Screening, cultivation, and biocatalytic performance of Rhodococcus boritolerans FW815 with strong 2,2-dimethylcyclopropanecarbonitrile hydratase activity

In this work, a mild, efficient bioconversion of 2,2-dimethylcyclopropanecarbonitrile (DMCPCN) to 2,2-dimethylcyclopropanecarboxamide (DMCPCA) in distilled water system was developed. The isolate FW815 was screened using the enrichment culture technique, displaying strong DMCPCN hydratase activity, and was identified as Rhodococcus boritolerans based on morphological, physiological, biochemical tests and 16S rRNA gene sequencing. Cultivation outcomes indicated that R. boritolerans FW815 was a neutrophile, with a growth optimum of 28-32°C; its DMCPCN hydratase belonged to the Fe-type family, and was most active at 38-42°C, pH 7.0, with maximal activity of 4.51 × 10(4) U g(-1) DCW. R. boritolerans FW815 was found to be DMCPCA amidase-negative, eliminating the contamination of dimethylcyclopropanecarboxylic acid. Moreover, it displayed high activity and acceptable reusability in the non-buffered distilled water system, comparable to those in pH 7.0 phosphate buffer (50.0 mmol l(-1)).