Viability of calcifying bacterial formulations in fly ash for applications in building materials

Biocompatibility characterization of vaterite with a bacterial whole-cell biosensor

The growing biomedical challenges impose the continuous development of novel platforms. Ensuring the biocompatibility of drug delivery and implantable biomedical devices is an essential requirement. Calcium carbonate (CaCO3) in the form of vaterite nanoparticles is a promising platform, which has demonstrated distinctive optical and biochemical properties, including high porosity and metastability. In this study, the biocompatibility of differently shaped CaCO₃ vaterite particles (toroids, ellipsoids, and spheroids) are evaluated by bacterial toxicity mode-of-action with a whole-cell biosensor. Different Escherichia coli (E. coli) strains were used in the bioluminescent assay, including cytotoxicity, genotoxicity and quorum-sensing. Firstly, both scanning electron microscopy (SEM) and fluorescence microscopy characterizations were conducted. Bacterial cell death and aggregates were observed only in the highest tested concentration of the vaterite particles, especially in toroids 15-25 µm. After, the bioluminescent bacterial panel was exposed to the vaterite particles, and their bioluminescent signal reflected their toxicity mode-of-action. The vaterite particles resulted in an induction factor (IF > 1) on the bacterial panel, which was higher after exposure to the toroids (1.557 ≤ IF ≤ 2.271) and ellipsoids particles (1.712 ≤ IF ≤ 2.018), as compared to the spheroids particles (1.134 ≤ IF ≤ 1.494), in all the tested bacterial strains. Furthermore, the vaterite particles did not affect the viability of the bacterial cells. The bacterial monitoring demonstrated the biofriendly nature of especially spheroids vaterite nanoparticles.

Biochemical composite material using corncob powder as a carrier material for ureolytic bacteria in soil cadmium immobilization

Corncob powder possessing its superiority in environmental sustainability and cost, was approved with strong capability of being a replacement of biochar in facilitating the microbial carbonate precipitation process. In this study, the ureolytic bacterial strain Bacillus sp. WA isolated from a pre-acquired metal contaminated soil in Guiyu, China, was showed to be well attached on the surfaces of corncob powder, indicating the carrier's role as a durable shelter for bacterial cells. The efficient immobilization helped develop biochemical composite material (BCM) and proven to function better the calcite precipitation. Afterwards, the mechanism and multi-directional benefits of BCM in edaphic cadmium remediation were examined through pot experiment and compared with corncob powder/bacterial strain/nutrient media as control groups. Integrated lab-scale analyses emphasized the advantages of BCM by the maximum soil urease activity (up to 3.440 U/mg and increased by 214% in 28 days), maximal bacterial propagation (most abundant population in fluorescence microscopy), richest surface functional group (most remarkable OC bond and CO bond in FTIR result), notable calcite precipitation (clear calcite crystals on the surface of BCM compared to control group under SEM-EDS), and highest Cd immobilization rate (exchangeable Cd decreased by 68.54%), among all treatments. The pH and electroconductivity measurements additionally led to the mechanism of corncob powder and NBU promoting pre-existed ureolytic bacteria in soil, which demonstrated the added value of corncob to be fine carbon source and residence shelter for soil microorganism, revealing its potential in developing agricultural materials.

Fly ash incorporated with biocement to improve strength of expansive soil

Microbially induced calcium carbonate precipitation (MICP) results in the formation of biocement (BC). This process, also known as biocementation, is recently widely used to improve the strength and durability of building materials including soils. In the present study, effectiveness of biocement as admixture with fly ash (FA) was investigated as first few studies to improve geotechnical properties of expansive soils. Biocement precipitated by Bacillus megaterium was blend with four formulations of fly ash at concentrations of 0, 10, 25 and 50%, namely 0% FABC, 10% FABC, 25% FABC, and 50% FABC, respectively. These formulations were separately added to expansive soils. Specimens with 25% FABC resulted in significant improvement in unconfined compressive strength of expansive soil that was more than two-times higher than control. Further, scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDX), Fourier-transform infrared spectroscopy (FTIR), and X-ray diffraction (XRD) analyses characterized microstructures of soil specimens, and depicted the process of MICP in improving strength of expansive soils. This research indicates that incorporation of biocement in fly ash is an effective means of increasing the strength of expansive soils.

Biomineralization in metakaolin modified cement mortar to improve its strength with lowered cement content

The role of industrial byproduct as supplementary cementitious material to partially replace cement has greatly contributed to sustainable environment. Metakaolin (MK), one of such byproduct, is widely used to partial replacement of cement; however, during cement replacement at high percentage, it may not be a good choice to improve the strength of concrete. Thus, in the present study, biocement, a product of microbially induced carbonate precipitation is utilized in MK-modified cement mortars to improve its compressive strength. Despite of cement replacement with MK as high as 50%, the presented technology improved compressive strength of mortars by 27%, which was still comparable to those mortars with 100% cement. The results proved that biomineralization could be effectively used in reducing cement content without compromising compressive strength of mortars. Biocementation also reduced the porosity of mortars at all ages. The process was characterized by SEM-EDS to observe bacterially-induced carbonate crystals and FTIR spectroscopy to predict responsible bonding in the formation of calcium carbonate. Further, XRD analysis identified bio/minerals formed in the MK-modified mortars. The study also encourages combining biological role in construction engineering to solve hazardous nature of cement and at same time solve the disposal problem of industrial waste for sustainable environment.

Rhizosphere of Avicennia marina (Forsk.) Vierh. as a landmark for polythene degrading bacteria

Due to high durability, cheap cost, and ease of manufacture, 311 million tons of plastic-based products are manufactured around the globe per annum. The slow/least rate of plastic degradation leads to generation of million tons of plastic waste per annum, which is of great environmental concern. Of the total plastic waste generated, polythene shared about 64 %. Various methods are available in the literature to tackle with the plastic waste, and biodegradation is considered as the most accepted, eco-friendly, and cost-effective method of polythene waste disposal. In the present study, an attempt has been made to isolate, screen, and characterize the most efficient polythene degrading bacteria by using rhizosphere soil of Avicennia marina as a landmark. From 12 localities along the west coast of India, a total of 123 bacterial isolates were recorded. Maximum percent weight loss (% WL; 21.87 ± 6.37 %) was recorded with VASB14 at pH 3.5 after 2 months of shaking at room temperature. Maximum percent weight gain (13.87 ± 3.6 %) was reported with MANGB5 at pH 7. Maximum percent loss in tensile strength (% loss in TS; 87.50 ± 4.8 %) was documented with VASB1 at pH 9.5. The results based on the % loss in TS were only reproducible. Further, the level of degradation was confirmed by scanning electron microscopic (SEM) and Fourier transform infrared spectroscopy (FTIR) analysis. In SEM analysis, scions/crakes were found on the surface of the degraded polythene, and mass of bacterial cell was also recorded on the weight-gained polythene strips. Maximum reduction in carbonyl index (4.14 %) was recorded in untreated polythene strip with Lysinibacillus fusiformis strain VASB14/WL. Based on 16S ribosomal RNA (rRNA) gene sequence homology, the most efficient polythene degrading bacteria were identified as L. fusiformis strainVASB14/WL and Bacillus cereus strain VASB1/TS.