Cloning and sequence analysis of a novel xylanase gene, Auxyn10A, from Aspergillus usamii

Preparation of biodegradable composite films based on carboxymethylated holocellulose from wheat straw

Holocellulose was extracted from wheat straw and catalytically transformed into carboxymethylated holocellulose (CMHCS) to prepare a biodegradable composite film. By changing the type and amount of catalyst, the carboxymethylation of the holocellulose was optimized with respect to the degree of substitution (DS). A high DS of 2.46 was achieved in the presence of a cocatalyst composed of polyethylene glycol and cetyltrimethylammonium bromide. The effect of DS on the properties of CMHCS-derived biodegradable composite films was further investigated. Compared to pristine holocellulose, the mechanical properties of the composite film were significantly improved and increased with increasing DS. The tensile strength, elongation at break, and Young's modulus increased from 6.58 MPa, 51.4 %, and 26.13 MPa for the unmodified holocellulose-based composite film to 14.81 MPa, 89.36 %, and 81.73 MPa for the film derived from the CMHCS with a DS of 2.46. The biodegradability of the composite film was assessed under soil burial biodisintegration conditions and reached 71.5 % degradation after 45 d. Additionally, a possible degradation process for the composite film was proposed. The results indicated that the CMHCS-derived composite film has good comprehensive performance, and CMHCS is expected to be applied in the field of biodegradable composite materials.

Cloning and sequence analysis demonstrate the chromate reduction ability of a novel chromate reductase gene from Serratia sp

The ChrT gene encodes a chromate reductase enzyme which catalyzes the reduction of Cr(VI). The chromate reductase is also known as flavin mononucleotide (FMN) reductase (FMN_red). The aim of the present study was to clone the full-length ChrT DNA from Serratia sp. CQMUS2 and analyze the deduced amino acid sequence and three-dimensional structure. The putative ChrT gene fragment of Serratia sp. CQMUS2 was isolated by polymerase chain reaction (PCR), according to the known FMN_red gene sequence from Serratia sp. AS13. The flanking sequences of the ChrT gene were obtained by high efficiency TAIL-PCR, while the full-length gene of ChrT was cloned in Escherichia coli for subsequent sequencing. The nucleotide sequence of ChrT was submitted onto GenBank under the accession number, KF211434. Sequence analysis of the gene and amino acids was conducted using the Basic Local Alignment Search Tool, and open reading frame (ORF) analysis was performed using ORF Finder software. The ChrT gene was found to be an ORF of 567 bp that encodes a 188-amino acid enzyme with a calculated molecular weight of 20.4 kDa. In addition, the ChrT protein was hypothesized to be an NADPH-dependent FMN_red and a member of the flavodoxin-2 superfamily. The amino acid sequence of ChrT showed high sequence similarity to the FMN reductase genes of Klebsiella pneumonia and Raoultella ornithinolytica, which belong to the flavodoxin-2 superfamily. Furthermore, ChrT was shown to have a 85.6% similarity to the three-dimensional structure of Escherichia coli ChrR, sharing four common enzyme active sites for chromate reduction. Therefore, ChrT gene cloning and protein structure determination demonstrated the ability of the gene for chromate reduction. The results of the present study provide a basis for further studies on ChrT gene expression and protein function.

Improving the thermostability of a mesophilic family 10 xylanase, AuXyn10A, from Aspergillus usamii by in silico design

To improve the thermostability of a mesophilic GH family 10 xylanase, AuXyn10A, from Aspergillus usamii E001, its modification was performed by in silico design. Based on the comparison of B-factor values, a mutant xylanase ATXyn10 was predicted by substituting a segment YP from Tyr(25) to Pro(34) of AuXyn10A with the corresponding one from Asn(24) to Ala(32) of TaXyn10, a thermophilic GH family 10 xylanase from Thermoascus aurantiacus. Analysis of a TaXyn10 crystal structure indicated that there is a close interaction between segments YP and FP. For that reason, another mutant xylanase ATXyn10(M) was designed by mutating Ser(286) and His(288) of ATXyn10 into the corresponding Gly(285) and Phe(287) in the FP of TaXyn10. Then, two ATXyn10- and ATXyn10(M)-encoding genes, ATxyn10 and ATxyn10 (M), were expressed in Pichia pas toris GS115. The temperature optimum of recombinant (re) ATXyn10(M) was 60 °C, 10 °C higher than that of reAuXyn10A. Its thermal inactivation half-life (t(1/2)) at 55 °C was 10.4-fold longer than that of reAuXyn10A. As compared with reAuXyn10A, reATXyn10(M) displayed a slight decrease in K(m) value and a significant increase in V(max) value from 6,267 to 8,870 U/mg.

Optimized expression, purification and characterization of a family 11 xylanase (AuXyn11A) from Aspergillus usamii E001 in Pichia pastoris

BACKGROUND

Xylanases have attracted much attention because of their potential applications. Unfortunately, the commercialization of xylanases is limited by their low catalytic activities. The aim of this study was to improve the activity of a xylanase by optimization of the expression conditions and to investigate its characterization.

RESULTS

The activity of recombinant AuXyn11A (reAuXyn11A), a family 11 xylanase from Aspergillus usamii E001 expressed in Pichia pastoris GS115, reached 912.6 U mL⁻¹ under the optimized conditions, which was 2.14 times as high as that expressed using the standard protocol. After the endogenous 18-aa propeptide had been processed in P. pastoris, reAuXyn11A (188-aa mature peptide) was secreted and purified with a specific activity of 22 714 U mg⁻¹. It displayed maximum activity at pH 5 and 50 °C and was stable in the pH range 4-8 and at a temperature of 45 °C or below. Its activity was not significantly affected by most metal ions and EDTA. Xylooligosaccharides ranging from xylobiose (X2) to xylohexaose (X6) were produced from insoluble corncob xylan by reAuXyn11A.

CONCLUSION

Its high specific activity and good enzymatic properties suggest that reAuXyn11A is a potential candidate for applications in industrial processes.

Expression and characterization of hyperthermotolerant xylanases, SyXyn11P and SyXyn11E, in Pichia pastoris and Escherichia coli

Both Syxyn11P and Syxyn11E, two codon-optimized genes encoding glycoside hydrolase (GH) family 11 hyperthermotolerant xylanases (designated SyXyn11P and SyXyn11E), were synthesized and inserted into pPIC9K(M) and pET-28a(+) vectors, respectively. The resulting recombinant expression vectors, pPIC9K(M)-Syxyn11P and pET-28a(+)-Syxyn11E, were transformed into Pichia pastoris GS115 and Escherichia coli BL21, respectively. The maximum activities of two recombinant xylanases (reSyXyn11P and reSyXyn11E) expressed in P. pastoris and E. coli reached 30.9 and 17.8 U/ml, respectively. The purified reSyXyn11P and reSyXyn11E displayed the same pH optimum at 6.5 and pH stability at a broad range of 4.5-9.0. The temperature optimum and stability of reSyXyn11P were 85 and 80 °C, higher than those of reSyXyn11E, respectively. Their activities were not significantly affected by metal ions tested and EDTA, but strongly inhibited by Mn(2+) and Ag(+). The K m and V max of reSyXyn11P toward birchwood xylan were 4.3 mg/ml and 694.6 U/mg, whose K m was close to that (4.8 mg/ml), but whose V max was much higher than that (205.6 U/mg) of reSyXyn11E. High-performance liquid chromatography analysis indicated that xylobiose and xylotriose as the major products were excised from insoluble corncob xylan by reSyXyn11P.

Engineering hyperthermostability into a mesophilic family 11 xylanase from Aspergillus oryzae by in silico design of N-terminus substitution

A mesophilic xylanase from Aspergillus oryzae CICC40186 (abbreviated to AoXyn11A) belongs to glycoside hydrolase family 11. The thermostability of AoXyn11A was significantly improved by substituting its N-terminus with the corresponding region of a hyperthermostable family 11 xylanase, EvXyn11(TS) . The suitable N-terminus of AoXyn11A to be replaced was selected by the comparison of B-factors between AoXyn11A and EvXyn11(TS) , which were generated and calculated after a 15 ns molecular dynamic (MD) simulation process. Then, the predicted hybrid xylanase (designated AEx11A) was modeled, and subjected to a 2 ns MD simulation process for calculating its total energy value. The N-terminus substitution was confirmed by comparing the total energy value of AEx11A with that of AoXyn11A. Based on the in silico design, the AEx11A was constructed and expressed in Pichia pastoris GS115. After 72 h of methanol induction, the recombinant AEx11A (reAEx11A) activity reached 82.2 U/mL. The apparent temperature optimum of reAEx11A was 80°C, much higher than that of reAoXyn11A. Its half-life was 197-fold longer than that of reAoXyn11A at 70°C. Compared with reAoXyn11A, the reAEx11A displayed a slight alteration in K(m) but a decrease in V(max).

Cloning, Expression, and Characterization of an GHF 11 Xylanase from Aspergillus niger XZ-3S

A xylanase gene (xynZF-2) from the Aspergillus niger XZ-3S was cloned and expressed in Escherichia coli. The coding region of the gene was separated by only one intron with the 68 bp in length. It encoded 225 amino acid residues of a protein with a calculated molecular weight of 24.04 kDa plus a signal peptide of 18 amino acids. The amino acid sequence of the xynZF-2 gene had a high similarity with those of family 11 of glycosyl hydrolases reported from other microorganisms. The mature peptide encoding cDNA was subcloned into pET-28a(+) expression vector. The resultant recombinant plasmid pET-28a-xynZF-2 was transformed into E. coli BL21(DE3), and finally the recombinant strain BL21/xynZF-2 was obtained. A maximum activity of 42.33 U/mg was gained from cellular of E. coli BL21/xynZF-2 induced by IPTG. The optimum temperature and pH for recombinant enzyme which has a good stability in alkaline conditions were 40 °C and 5.0, respectively. Fe(3+) had an active effect on the enzyme obviously.

Expression of a family 10 xylanase gene from Aspergillus usamii E001 in Pichia pastoris and characterization of the recombinant enzyme

A cDNA gene (Auxyn10A), which encodes a mesophilic family 10 xylanase from Aspergillus usamii E001 (abbreviated to AuXyn10A), was amplified and inserted into the XhoI and NotI sites of pPIC9K(M) vector constructed from a parent pPIC9K. The recombinant expression vector, designated pPIC9K(M)-Auxyn10A, was transformed into Pichia pastoris GS115. All P. pastoris transformants were spread on a MD plate, and then inoculated on geneticin G418-containing YPD plates for screening multiple copies of integration of the Auxyn10A. One transformant expressing the highest recombinant AuXyn10A (reAuXyn10A) activity of 368.6 U/ml, numbered as P. pastoris GSX10A4-14, was selected by flask expression test. SDS-PAGE assay demonstrated that the reAuXyn10A was extracellularly expressed with an apparent M.W. of 39.8 kDa. The purified reAuXyn10A displayed the maximum activity at pH 5.5 and 50 °C. It was highly stable at a broad pH range of 4.5-8.5, and at a temperature of 45 °C. Its activity was not significantly affected by EDTA and several metal ions except Mn(2+), which caused a strong inhibition. The K(m) and V(max), towards birchwood xylan at pH 5.5 and 50 °C, were 2.25 mg/ml and 6,267 U/mg, respectively. TLC analysis verified that the AuXyn10A is an endo-β-1,4-D-xylanase, which yielded a major product of xylotriose and a small amount of xylose, xylotetraose, and xylopentose from birchwood xylan, but no xylobiose.

Cloning and functional expression of an acidophilic β-mannanase gene (Anman5A) from Aspergillus niger LW-1 in Pichia pastoris

A cDNA fragment of the Anman5A, a gene that encodes an acidophilic β-mannanase of Aspergillus niger LW-1 (abbreviated as AnMan5A), was cloned and functionally expressed in Pichia pastoris . Homology alignment of amino acid sequences verified that the AnMan5A belongs to the glycoside hydrolase (GH) family 5. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) assay demonstrated that the recombinant AnMan5A (reAnMan5A), a N-glycosylated protein with an apparent molecular weight of 52.0 kDa, was secreted into the medium. The highest reAnMan5A activity expressed by one P. pastoris transformant, labeled as GSAnMan4-12, reached 29.0 units/mL. The purified reAnMan5A displayed the highest activity at pH 3.5 and 70 °C. It was stable at a pH range of 3.0-7.0 and at a temperature of 60 °C or below. Its activity was not significantly affected by an array of metal ions and ethylenediaminetetraacetic acid (EDTA). The K(m) and V(max) of the reAnMan5A, toward locust bean gum, were 1.10 mg/mL and 266.7 units/mg, respectively.

Cloning and bioinformatics analysis of an endoglucanase gene (Aucel12A) from Aspergillus usamii and its functional expression in Pichia pastoris

Using 3' and 5' rapid amplification of cDNA ends methods, the full-length cDNA sequence encoding an endo-1,4-β-glucanase of Aspergillus usamii E001 (abbreviated as AuCel12A) was amplified from the total RNA. The clone cDNA sequence of the gene encoding the AuCel12A, named as Aucel12A, is 1,027 bp in length harboring 5' and 3' non-coding regions, as well as a 720 bp of open reading frame that encodes a 16-aa signal peptide, and a 223-aa mature AuCel12A with a theoretical M.W. of 24,294 Da, a calculated pI of 4.15, and one putative N-glycosylation site. The complete DNA sequence of the gene Aucel12A was amplified from the genomic DNA of A. usamii E001 by using the conventional PCR and pUCm-T vector-mediated PCR initially developed in our lab. The clone DNA sequence is 1,576 bp in length, consisting of a 5' flanking regulatory region, three exons, and two introns with sizes of 50 and 66 bp. The cDNA fragment encoding the mature AuCel12A was expressed in a fully active form in Pichia pastoris. One P. pastoris transformant expressing the highest recombinant AuCel12A (rAuCel12A) activity, labeled as P. pastoris GSCel2-1, was chosen for subsequent studies. Integration of the Aucel12A into P. pastoris genome was confirmed by PCR analysis using 5'- and 3'-AOX1 primers. SDS-PAGE and enzyme activity assays demonstrated that the rAuCel12A, a glycosylated protein with an apparent M.W. of 27.0 kDa and a carbohydrate content of 4.82%, was secreted into the culture medium. The purified rAuCel12A displayed the highest activity at pH 5.0 and 60°C. It was highly stable at a pH range of 3.5-7.0, and at a temperature of 55°C or below. Its activity was not significantly affected by an array of metal ions and EDTA, but inhibited by Ag⁺, Hg²⁺ and Fe²⁺. The K(m) and V(max) of the rAuCel12A, towards carboxymethylcellulose-Na (CMC-Na) at pH 5.0 and 50°C were 4.85 mg/ml and 160.5 U/mg, respectively.