The feasibility of sub-millisievert coronary CT angiography with low tube voltage, prospective ECG gating, and a knowledge-based iterative model reconstruction algorithm

Feasibility of Low-Dose and Low-Contrast Media Volume Approach in Computed Tomography Cardiovascular Imaging Reconstructed with Model-Based Algorithm

Aim: To evaluate the dose reduction and image quality of low-dose, low-contrast media volume in computed tomography (CT) examinations reconstructed with the model-based iterative reconstruction (MBIR) algorithm in comparison with the hybrid iterative (HIR) one. Methods: We prospectively enrolled a total of 401 patients referred for cardiovascular CT, evaluated with a 256-MDCT scan with a low kVp (80 kVp) reconstructed with an MBIR (study group) or a standard HIR protocol (100 kVp-control group) after injection of a fixed dose of contrast medium volume. Vessel contrast enhancement and image noise were measured by placing the region of interest (ROI) in the left ventricle, ascending aorta; left, right and circumflex coronary arteries; main, right and left pulmonary arteries; aortic arch; and abdominal aorta. The signal-to-noise ratio (SNR) and contrast-to-noise ratio (CNR) were computed. Subjective image quality obtained by consensus was assessed by using a 4-point Likert scale. Radiation dose exposure was recorded. Results: HU values of the proximal tract of all coronary arteries; main, right and left pulmonary arteries; and of the aorta were significantly higher in the study group than in the control group (p < 0.05), while the noise was significantly lower (p < 0.05). SNR and CNR values in all anatomic districts were significantly higher in the study group (p < 0.05). MBIR subjective image quality was significantly higher than HIR in CCTA and CTPA protocols (p < 0.05). Radiation dose was significantly lower in the study group (p < 0.05). Conclusions: The MBIR algorithm combined with low-kVp can help reduce radiation dose exposure, reduce noise, and increase objective and subjective image quality.

Inter-observer agreement and image quality of model-based algorithm applied to the Coronary Artery Disease-Reporting and Data System score

PURPOSE

To evaluate the inter-observer agreement of the CAD-RADS reporting system and compare image quality between model-based iterative reconstruction algorithm (MBIR) and standard iterative reconstruction algorithm (IR) of low-dose cardiac computed tomography angiography (CCTA).

METHODS

One-hundred-sixty patients undergone a 256-slice MDCT scanner using low-dose CCTA combined with prospective ECG-gated techniques were enrolled. CCTA protocols were reconstructed with both MBIR and IR. Each study was evaluated by two readers using the CAD-RADS lexicon. Vessels enhancement, image noise, signal-to-noise (SNR), and contrast-to-noise (CNR) were computed in the axial native images, and inter-observer agreement was assessed. Radiation dose exposure as dose-length product (DLP) and effective dose were finally reported.

RESULTS

The reliability analysis between the two readers was almost perfect for all CAD-RADS standard categories. Moreover, a significantly higher value of subjective qualitative analysis, SNR, and CNR in MBIR images compared to IR were found, due to a lower noise level (all p < 0.05). The mean DLP measured was 63.9 mGy*cm, and the mean effective dose was 0.9 mSv.

CONCLUSION

Inter-observer agreement of CAD-RADS was excellent confirming the importance, the feasibility, and the reproducibility of the CAD-RADS scoring system for CCTA. Moreover, lower noise and higher image quality with MBIR compared to IR were found.

IMPLICATIONS FOR PRACTICE

MBIR, by reducing noise and improving image quality, can help a better assessment of CAD-RADS, in comparison with standard IR algorithm.

Cardiac Computed Tomography Perfusion: Contrast Agents, Challenges and Emerging Methodologies from Preclinical Research to the Clinics

Computed Tomography (CT) has long been regarded as a purely anatomical imaging modality. Recent advances on CT technology and Contrast Agents (CA) in both clinical and preclinical cardiac imaging offer opportunities for the use of CT in functional imaging. Combined with modern ECG-gating techniques, functional CT has now become a reality allowing a comprehensive evaluation of myocardial global and regional function, perfusion and coronary angiography. This article aims at reviewing the current status of cardiac CT perfusion and micro-CT perfusion with established and experimental scanners and contrast agents, from clinical practice to the experimental domain of investigations based on animal models of heart diseases.

Increasing iterative reconstruction strength at low tube voltage in coronary CT angiography protocols using 3D-printed and Catphan® 500 phantoms

Purpose

The purpose of this study was to investigate the effect of increasing iterative reconstruction (IR) algorithm strength at different tube voltages in coronary computed tomography angiography (CCTA) protocols using a three‐dimensional (3D)‐printed and Catphan^® 500 phantoms.

Methods

A 3D‐printed cardiac insert and Catphan 500 phantoms were scanned using CCTA protocols at 120 and 100 kVp tube voltages. All CT acquisitions were reconstructed using filtered back projection (FBP) and Adaptive Statistical Iterative Reconstruction (ASIR) algorithm at 40% and 60% strengths. Image quality characteristics such as image noise, signal–noise ratio (SNR), contrast–noise ratio (CNR), high spatial resolution, and low contrast resolution were analyzed.

Results

There was no significant difference (P > 0.05) between 120 and 100 kVp measures for image noise for FBP vs ASIR 60% (16.6 ± 3.8 vs 16.7 ± 4.8), SNR of ASIR 40% vs ASIR 60% (27.3 ± 5.4 vs 26.4 ± 4.8), and CNR of FBP vs ASIR 40% (31.3 ± 3.9 vs 30.1 ± 4.3), respectively. Based on the Modulation Transfer Function (MTF) analysis, there was a minimal change of image quality for each tube voltage but increases when higher strengths of ASIR were used. The best measure of low contrast detectability was observed at ASIR 60% at 120 kVp.

Conclusions

Changing the IR strength has yielded different image quality noise characteristics. In this study, the use of 100 kVp and ASIR 60% yielded comparable image quality noise characteristics to the standard CCTA protocols using 120 kVp of ASIR 40%. A combination of 3D‐printed and Catphan^® 500 phantoms could be used to perform CT dose optimization protocols.

Optimization of Pediatric Body CT Angiography: What Radiologists Need to Know

OBJECTIVE. Pediatric CT angiography (CTA) presents unique challenges compared with adult CTA. Because of the ionizing radiation exposure, CTA should be used judiciously in children. The pearls offered here are observations gleaned from the authors' experience in the use of pediatric CTA. We also present some potential follies to be avoided. CONCLUSION. Understanding the underlying principles and paying meticulous attention to detail can substantially optimize dose and improve the diagnostic quality of pediatric CTA.

Coronary CT Angiography with Knowledge-Based Iterative Model Reconstruction for Assessing Coronary Arteries and Non-Calcified Predominant Plaques

Objective

To assess the effects of iterative model reconstruction (IMR) on image quality for demonstrating non-calcific high-risk plaque characteristics of coronary arteries.

Materials and Methods

This study included 66 patients (53 men and 13 women; aged 39–76 years; mean age, 55 ± 13 years) having single-vessel disease with predominantly non-calcified plaques evaluated using prospective electrocardiogram-gated 256-slice CT angiography. Paired image sets were created using two types of reconstruction: hybrid iterative reconstruction (HIR) and IMR. Plaque characteristics were compared using the two algorithms. The signal-to-noise ratio (SNR) and contrast-to-noise ratio (CNR) of the images and the CNR between the plaque and adjacent adipose tissue were also compared between the two reformatted methods.

Results

Seventy-seven predominantly non-calcified plaques were detected. Forty plaques showed napkin-ring sign with the IMR reformatted method, while nineteen plaques demonstrated napkin-ring sign with HIR. There was no statistically significant difference in the presentation of positive remodeling, low attenuation plaque, and spotty calcification between the HIR and IMR reconstructed methods (all p > 0.5); however, there was a statistically significant difference in the ability to discern the napkin-ring sign between the two algorithms (χ² = 12.12, p < 0.001). The image noise of IMR was lower than that of HIR (10 ± 2 HU versus 12 ± 2 HU; p < 0.01), and the SNR and CNR of the images and the CNR between plaques and surrounding adipose tissues on IMR were better than those on HIR (p < 0.01).

Conclusion

IMR can significantly improve image quality compared with HIR for the demonstration of coronary artery and atherosclerotic plaques using a 256-slice CT.

Diagnostic efficacy of model-based iterative reconstruction algorithm in an assessment of coronary artery in comparison with standard hybrid-Iterative reconstruction algorithm: dose reduction and image quality

PURPOSE

To evaluate the image quality and radiation dose exposure of low-dose coronary CTA (cCTA) study, reconstructed with the new model-based iterative reconstruction algorithm (IMR), compared with standard hybrid-iterative reconstruction (iDose4) cCTA in patients with suspected coronary artery disease.

MATERIALS AND METHODS

Ninety-eight patients with an indication for coronary CT study were prospectively enrolled. Fifty-two patients (study group) underwent 256-MDCT low-dose cCTA (80 kV; automated-mAs; 60 mL of CM, 350 mgL/mL) with prospective ECG-triggering acquisition and IMR. A control group of 46 patients underwent 256-MDCT standard prospective ECG-gated protocol (100 kV; automated-mAs; 70 mL of CM, 400 mgL/mL; iDose4). Subjective and objective image quality (attenuation value, SD, SNR and CNR) were evaluated by two radiologists subjectively. Radiation dose exposure was quantified as DLP, CTDIvol and ED.

RESULTS

Mean values of mAs were significantly lower for IMR-cCTA (167 ± 62 mAs) compared to iDose-cCTA (278 ± 55 mAs), p < 0.001. With a significant reduction of 38% in radiation dose exposure (DLP: IMR-cCTA 91.7 ± 26 mGy cm vs. iDose-cCTA 148.6 ± 35 mGy cm; p value < 0.001), despite the use of different CM, we found higher mean attenuation values of the coronary arteries in IMR group compared to iDose4 (mean density in LAD: 491HU IMR-cCTA vs. 443HU iDose-cCTA; p = 0.03). We observed a significant higher value of SNR and CNR in study group due to a lower noise level. Qualitative analysis did not reveal any significant differences between the two groups (p = 0.23).

CONCLUSIONS

Low-dose cCTA study combined with IMR reconstruction allows to correctly evaluate coronary arteries disease, offering high-quality images and significant radiation dose exposure reduction (38%), as compared to standard cCTA protocol.

Non-inferior low-dose coronary computed tomography angiography image quality with knowledge-based iterative model reconstruction for overweight patients

We investigated the feasibility of low-dose coronary computed tomography angiography (CCTA), using a prospective electrocardiogram (ECG)-triggered axial scan protocol, knowledge-based iterative model reconstruction (IMR), and fixed tube current, in overweight subjects. Forty non-overweight (group A; body-mass index [BMI] < 25 kg/m²) and 40 overweight individuals (group B; BMI = 25–30 kg/m²), who underwent CCTA for coronary artery disease screening, were retrospectively and consecutively enrolled. A 64-slice CT scanner was used at 100-kVp tube voltage and 150-mA tube current, and images were reconstructed using IMR techniques. Image noise, attenuation at the aorta, signal-to-noise ratio (SNR), and contrast-to-noise ratio (CNR) at the proximal right and left main coronary arteries (pRCA and LMCA) were calculated. CCTA images were qualitatively evaluated using a four-point scale (1, poor; 4, excellent) and analyzed using a non-inferiority test with a pre-defined non-inferiority margin of -0.2. The mean CCTA radiation dose (Group A: 1.33 ± 0.02 mSv; Group B: 1.35 ± 0.10 mSv; p = 0.151) and mean aortic root CT attenuation values (Group A: 447.9 ± 81.6 HU; Group B: 439.5 ± 63.6 HU; p = 0.571) did not differ significantly between the two groups. The mean noise in groups A and B was 26.0 ± 4.8 HU and 29.2 ± 4.4 HU, respectively (p = 0.005). The noise reduction ratio in the groups, compared to filtered back projection, was 65.0% and 68.1%, respectively. The mean grade of image quality did not differ significantly (3.75 ± 0.04 vs. 3.71 ± 0.04, p = 0.478). Group B CCTA image quality was non-inferior (mean difference = -0.043, 95% CI = -0.162–0.077) to that of Group A. We concluded that low-dose CCTA with prospective ECG-triggering and IMR might be applied to overweight subjects, as well as to normal-weight subjects, by using a fixed tube current without an increase in tube current based on the patient’s body size.

CT coronary imaging-a fast evolving world

Computed tomography (CT) has become an important modality in the evaluation of coronary artery disease (CAD). The tremendous technological advances in CT in the last two decades has made it possible to obtain high quality images of coronary arteries with high spatial and temporal resolutions. Multiple trials have confirmed the accuracy of CT compared to invasive catheter angiography. CT is also able to evaluate beyond the lumen in characterizing and quantifying atherosclerotic plaques, including evaluation of high risk features. Although CTA has low specificity in identification of lesion-specific ischemia, functional techniques are now possible such as CT myocardial perfusion and CT-fractional flow reserve (FFR) which evaluate the hemodynamic significance of stenosis and help with revascularization strategies. Multi-energy CT provides additional information beyond what is possible with a conventional CT and is useful in variety of clinical applications, including myocardial perfusion imaging, lesion characterization and low contrast studies. Large trials have confirmed the ability of CT to predict major adverse cardiovascular events and recent trials have even demonstrated improved clinical outcomes by using CT for the evaluation of CAD. CT is also useful in structural heart disease and 3 D printing is now increasingly used for surgical/interventional planning. Machine learning is evolving rapidly and is likely to impact diagnosis and management.

Evaluation of the CT imaging findings in patients newly diagnosed with chronic thromboembolic pulmonary hypertension

PURPOSE

The aim of this study was to evaluate the vascular and parenchymal CT imaging findings, including vessel and cardiac chamber diameter measurements, in patients newly diagnosed with chronic thromboembolic pulmonary hypertension (CTEPH). The CT imaging findings were correlated with hemodynamic measurements and patient outcome.

METHODS

Vascular and parenchymal CT findings were assessed on retrospectively ECG-gated MDCT angiography scans in 76 patients newly diagnosed with CTEPH. The diameters of the right and left ventricle (dRV, dLV), the right and left atrium (dRA, dLA), the ascending aorta (dAA), the right and left pulmonary arteries (drPA, dlPA), and the main pulmonary artery (dPA) were measured on axial CT scans. The CT imaging findings were correlated with demographic and hemodynamic data and adverse patient outcome due to right heart failure (RHF).

RESULTS

The majority of patients showed chronic PE, mosaic perfusion, disparity in segmental vessel size, parenchymal densities, bronchial dilatation, and bronchial collaterals in CT. Mean pulmonary artery pressure (mPAP) was not significantly different in patients with and those without chronic PE, mosaic perfusion, disparity in segmental vessel size, parenchymal densities, bronchial dilatation, and bronchial collaterals. Mean PAP showed significant correlations with the CT metrics of dRV/dLV ratio, dRA, dRV, dPA and dPA/dAA ratio, but no correlation with the central thrombi score. By backward linear regression, the dPA/dAA ratio independently correlated with mPAP. Patients who died of RHF tended to have a higher frequency of exclusively chronic peripheral PE and greater dRV/dLV ratios on presenting CT scans compared with survivors.

CONCLUSION

The majority of patients newly diagnosed with CTEPH show vascular signs of chronic PE, mosaic perfusion, parenchymal densities, disparity in segmental vessel size, bronchial dilatation, and bronchial collaterals on presenting CT scans. Particularly CTEPH patients with exclusively chronic peripheral PE and increased dRV/dLV ratios seem to be at risk of adverse outcome due to RHF.

Influence of tube potential on quantitative coronary plaque analyses by low radiation dose computed tomography: a phantom study

Previous studies have shown that employing the low dose computed tomography (CT) technique based on low tube potential reduces the radiation dose required for the coronary artery examination protocol. However, low tube potential may adversely influence the CT number of plaque composition. Therefore, we aimed to determine whether quantitative atherosclerotic plaque analysis by a multi-slice, low radiation dose CT protocol using 80 kilovolts (kV) yields results comparable to those of the standard 120 kV protocol. Artificial plaque samples (n = 17) composed of three kinds of plaque were scanned at 120 and 80 kV. Relative low-density and medium-density plaque component volumes obtained by three protocols (80 kV, 60 Hounsfield units [HU] threshold; 120 kV, 60 HU threshold; and 80 kV, 82 HU threshold) were compared. Using the 60 HU threshold, relative volume of the low-density plaque component obtained at 80 kV was lower than that obtained at 120 kV (27 ± 3% vs. 51 ± 5%, P < 0.001), whereas relative volume of the medium-density plaque component obtained at 80 kV was higher than that obtained at 120 kV (73 ± 3% vs. 48 ± 5%, P < 0.001). By contrast, no significant difference in relative volume obtained at 80 kV (82 HU threshold) versus 120 kV (60 HU threshold) was observed for either low-density (52 ± 5% vs. 51 ± 5%) or medium-density (48 ± 5% vs. 48 ± 5%) plaque component. Low tube potential may affect the accuracy of quantitative atherosclerotic plaque analysis. For our phantom test, 82 HU was the optimal threshold for scanning at 80 kV.

Knowledge-based iterative model reconstruction in coronary computed tomography angiography: comparison with hybrid iterative reconstruction and filtered back projection

Background Knowledge-based iterative model reconstruction (IMR) is known to allow radiation dose reduction while preserving image quality. Purpose To investigate the effect of IMR on coronary computed tomography angiography (CCTA) by comparing it with filtered back projection (FBP) and hybrid iterative reconstruction (HIR). Material and Methods Forty-five patients (group A) who underwent CCTA with prospective electrocardiogram (ECG) triggering at 80 kVp were included. All images were reconstructed using three algorithms: FBP, HIR, and IMR. The control group comprised 45 patients (group B) who underwent CCTA at 100 kVp; their images were reconstructed with HIR alone. Objective and subjective image quality was assessed by two radiologists. Results In group A, the signal-to-noise and contrast-to-noise ratios were significantly higher for images reconstructed with IMR than with HIR or FBP ( P < 0.001). IMR was also superior to HIR and FBP in subjective image quality analyses, including image noise, vessel sharpness, beam-hardening artifact, and overall quality ( P < 0.001). Moreover, the images reconstructed using IMR in group A had superior image quality with less radiation exposure than those reconstructed using HIR in group B on both objective and subjective analyses ( P < 0.001). The mean attenuation values were also significantly higher in group A than in group B ( P < 0.001). Conclusion Compared with HIR and FBP, IMR provided higher quality images with less radiation exposure in CCTA, using low kilovoltage and prospective ECG triggering.

The role of MRI and CT for diagnosis and work-up in suspected ACS

This article describes the role of cardiovascular magnetic resonance (CMR) and cardiac computed tomography (CCT) in the diagnostic work-up of patients with suspected acute coronary syndrome (ACS). Recent studies on the principles, diagnostic targets, clinical utility, accuracy, prognostic relevance and implications for clinical decision-making are discussed and current state-of-the-art and novel approaches are presented. The authors recognize that in ACS, time is of the essence and therefore put a special emphasis on the feasibility of tomographic cardiac imaging in realistic clinical settings.

State-of-the-Art Pulmonary CT Angiography for Acute Pulmonary Embolism

OBJECTIVE

Pulmonary CT angiography (CTA) is the imaging modality of choice in suspected acute pulmonary embolism (PE). Current pulmonary CTA techniques involve ever lower doses of contrast medium and radiation along with advanced postprocessing applications to enhance image quality, diagnostic accuracy, and provide added value in patient management. The objective of this article is to summarize these current developments and discuss the appropriate use of state-of-the-art pulmonary CTA.

CONCLUSION

Pulmonary CTA is well established as a fast and reliable means of excluding or diagnosing PE. Continued developments in CT system hardware and postprocessing techniques will allow incremental reductions in radiation and contrast material requirements while improving image quality. Advances in risk stratification and prognostication from pulmonary CTA examinations should further refine its clinical value while minimizing the potential harm from overutilization and overdiagnosis.

Image quality of ct angiography using model-based iterative reconstruction in infants with congenital heart disease: Comparison with filtered back projection and hybrid iterative reconstruction

PURPOSE

To compare the image quality, rate of coronary artery visualization and diagnostic accuracy of 256-slice multi-detector computed tomography angiography (CTA) with prospective electrocardiographic (ECG) triggering at a tube voltage of 80kVp between 3 reconstruction algorithms (filtered back projection (FBP), hybrid iterative reconstruction (iDose⁴) and iterative model reconstruction (IMR)) in infants with congenital heart disease (CHD).

METHODS

Fifty-one infants with CHD who underwent cardiac CTA in our institution between December 2014 and March 2015 were included. The effective radiation doses were calculated. Imaging data were reconstructed using the FBP, iDose⁴ and IMR algorithms. Parameters of objective image quality (noise, signal-to-noise ratio (SNR) and contrast-to-noise ratio (CNR)); subjective image quality (overall image quality, image noise and margin sharpness); coronary artery visibility; and diagnostic accuracy for the three algorithms were measured and compared.

RESULTS

The mean effective radiation dose was 0.61±0.32 mSv. Compared to FBP and iDose⁴, IMR yielded significantly lower noise (P<0.01), higher SNR and CNR values (P<0.01), and a greater subjective image quality score (P<0.01). The total number of coronary segments visualized was significantly higher for both iDose⁴ and IMR than for FBP (P=0.002 and P=0.025, respectively), but there was no significant difference in this parameter between iDose⁴ and IMR (P=0.397). There was no significant difference in the diagnostic accuracy between the FBP, iDose⁴ and IMR algorithms (χ²=0.343, P=0.842).

CONCLUSIONS

For infants with CHD undergoing cardiac CTA, the IMR reconstruction algorithm provided significantly increased objective and subjective image quality compared with the FBP and iDose⁴ algorithms. However, IMR did not improve the diagnostic accuracy or coronary artery visualization compared with iDose⁴.

Coronary Computed Tomographic Angiography at 80 kVp and Knowledge-Based Iterative Model Reconstruction Is Non-Inferior to that at 100 kVp with Iterative Reconstruction

The aims of this study were to compare the image noise and quality of coronary computed tomographic angiography (CCTA) at 80 kVp with knowledge-based iterative model reconstruction (IMR) to those of CCTA at 100 kVp with hybrid iterative reconstruction (IR), and to evaluate the feasibility of a low-dose radiation protocol with IMR. Thirty subjects who underwent prospective electrocardiogram-gating CCTA at 80 kVp, 150 mAs, and IMR (Group A), and 30 subjects with 100 kVp, 150 mAs, and hybrid IR (Group B) were retrospectively enrolled after sample-size calculation. A BMI of less than 25 kg/m² was required for inclusion. The attenuation value and image noise of CCTA were measured and the signal-to-noise ratio (SNR) and contrast-to-noise ratio (CNR) were calculated at the proximal right coronary artery and left main coronary artery. The image noise was analyzed using a non-inferiority test. The CCTA images were qualitatively evaluated using a four-point scale. The radiation dose was significantly lower in Group A than Group B (0.69 ± 0.08 mSv vs. 1.39 ± 0.15 mSv, p < 0.001). The attenuation values were higher in Group A than Group B (p < 0.001). The SNR and CNR in Group A were higher than those of Group B. The image noise of Group A was non-inferior to that of Group B. Qualitative image quality of Group A was better than that of Group B (3.6 vs. 3.4, p = 0.017). CCTA at 80 kVp with IMR could reduce the radiation dose by about 50%, with non-inferior image noise and image quality than those of CCTA at 100 kVp with hybrid IR.