Spatial and vertical distribution analysis of heavy metals in urban retention tanks sediments: a case study of Strzyza Stream

Environmental risk assessment of the surface sediments based on trace elements analysis from the largest freshwater lake in the southern slope of the Himalaya, Nepal

Freshwater ecosystems, including high-altitude lakes, can be affected by trace metal pollution derived from a mix of natural sources and anthropogenic activities. These pollutants often collect in surface sediments, with notable concentrations in the deeper areas of lakes. To evaluate the environmental risk associated with metal contaminated sediment in Rara Lake, southern Himalaya, surface sediment samples were systematically collected in November 2018, with a subsequent specific emphasis on determinations of trace element concentrations. Subsequent analysis revealed nine elements exhibiting a descending mean concentrations order: iron (Fe) > manganese (Mn) > chromium (Cr) > rubidium (Rb) > nickel (Ni) > strontium (Sr) > cobalt (Co) > copper (Cu) > cadmium (Cd), of 7205.55 mg kg-1, 2290.34 mg kg-1, 176.29 mg kg-1, 153.78 mg kg-1, 51.86 mg kg-1, 44.61 mg kg-1, 38.89 mg kg-1, 29.11 mg kg-1, and 0.10 mg kg-1, respectively. Comparisons to sediment quality guidelines highlight that Mn, Cr, Cu, and Cd as significant threats to the aquatic ecosystem in Rara Lake. To assess the impact of metal pollution, enrichment factor (EF), geo-accumulation index (Igeo), pollution load index (PLI), and contamination factor (CF) were computed. All metals (except Cd) had Igeo value exceeding 5, displaying strong contamination. EF values for Mn, Cr, Co, and Ni metals were > 10, indicating severe effects of anthropogenic influences. CF and PLI values also indicated significant pollution for most of the investigated sites. Elevated trace element concentrations have the potential to adversely affect water, sediment, and aquatic life, also potentially impacting nutrient cycling and microbial activity. This study enhances our understanding of the metal compositions within Rara Lake sediments and provides a basis for more effective lake management and pollution control strategies. Urgent action by regional governing bodies is crucial to address the early stages of metals pollution, including identification and controlling of pollution sources, by appropriate regulations, optimizing industrial practices, and remediating existing pollution to prevent further contamination and protect the lake ecosystem.

Unveiling heavy metal pollution dynamics in sediments of river Ulhas, Maharashtra, India: a comprehensive analysis of anthropogenic influence, pollution indices, and health risk assessment

Metals and metalloids tainting sediments is an eminent issue, predominantly in megacities like Mumbai and Navi Mumbai, requiring an exhaustive examination to identify metal levels in river bodies that serve various populations. Thus, utilising pollution indices, multivariate analysis, and health risk assessment studies, we propose a novel investigation to examine the metal content in the Ulhas River sediments, a prominent agricultural and drinking water supply (320 million-litre per day) near Mumbai in Maharashtra, India. The eleven metals and metalloids (As, Cd, Cr, Cu, Fe, Hg, Mn, Ni, Pb, Se, and Zn) were examined monthly from 10 stations totaling 120 sediment specimens from October 2022 to September 2023. Investigations revealed that average values of Cr, Cu, Hg, and Ni exceeded Australian and New Zealand Environment and Conservation Council and Agriculture and Resource Management Council values, while all metals exceeded World surface rock average limits except As. Various pollution indices showed that upstream sites had none to low level contamination, whereas downstream locations had moderate to considerable contamination, suggesting anthropogenic influences. Furthermore, multivariate analysis including correlation, cluster, and principal component analysis identified that sediment pollution was mostly caused by anthropogenic activities. Lastly, health risk assessment indicated Fe was non-carcinogenic to children, whereas Cr and Ni were carcinogenic to children and adults, with children being more susceptible. Thus, from the findings of the study it is clear that, despite low to moderate pollution levels, metals may have significant repercussions, thus requiring long-term planning, frequent monitoring, and metal abatement strategies to mitigate river contamination.

Assessing the Impact of Anthropogenically Modified Land Uses on Wetland Health: Case of Witbank Dam Catchment in South Africa

Wetlands are critical ecological infrastructures that improve water quality, serve as habitat for fish and other aquatic life, accumulate floodwaters, and maintain surface water flow during dry periods. However, the health of wetlands has been compromised by anthropogenic activities that affect the constant supply of ecosystem services. This study assessed the impact of anthropogenically modified land use on wetland health in the Witbank Dam Catchment in South Africa, whose land use has been severely modified for agriculture and mining purposes. The study developed a model linking surface runoff generated in the catchment with land use and wetland typology to comprehend diffuse pollution from pollution-source land uses. Runoff data and related wetland spatial information were processed and analysed in a Geographic Information System (GIS) to estimate pollutants (agricultural nutrients and acid mine drainage) from runoff detained and released by wetlands. The analysis facilitated the assessment of the value of wetlands in enhancing water quality, as well as human and environmental health. The runoff volume from pollution-source land uses (urban areas, farmlands, and mining) was used to evaluate annual pollution levels. Wetland types are ranked according to their efficiency levels to filter pollutants. The assumption is that the difference between filtered and unfiltered runoff is the quantity of polluted runoff water discharged into the river system. The analysis has shown that 85% of polluted runoff generated in the catchment ends up in the river system. An important observation is that although wetlands have a substantial ability to absorb excess pollutants, they have finite boundaries. Once they reach their full holding capacity, they can no longer absorb any further pollutants. The excess is discharged into the river system, risking human and environmental health. This explains why the Limpopo River is heavily polluted resulting in the death of fish, crocodiles and other aquatic life.

Anthropogenic effects on soils in the eastern Tibetan Plateau revealed by geochemical elemental characteristics

The Tibetan Plateau (TP) constitutes a fragile and sensitive ecological environment, which is vulnerable to global climate change and human activities. To investigate the anthropogenic effects on the TP's environmental system is valuable for guiding human responses and adaptations to future environmental changes. In this study, we detailedly analyzed the geochemical elements of four representative soil sections developed on loess from Ganzi, Jinchuan, Aba, and Chuanzhusi in the eastern TP. The chemical elemental profiles distinctly indicated the presence of typical anthropogenic elements (Cu, Zn, Ni, Cr, Pb, Mn, and Fe), underscoring the substantial influence of human activities on TP soil, and showing spatial variance. Our results indicate that anthropogenic impacts were relatively low at Aba and Ganzi, resulting in a deficit of anthropogenic elements at the surface layer. Whereas at Jinchuan and Chuanzhusi, relatively intense anthropogenic impacts have led to the enrichment of anthropogenic elements in the topsoil. We infer that agricultural activities, increased traffic, and expansion of tourism activities were the major factors affecting the anthropogenic elements of TP soils. Our study highlights the impact of human activities on soil geochemical processes in the Tibetan Plateau.

A multi-criteria approach to investigate spatial distribution, sources, and the potential toxicological effect of polycyclic aromatic hydrocarbons (PAHs) in sediments of urban retention tanks

Bottom sediments deposited in retention tanks (RTs) located on two urban streams (Oliwski and Strzyza) in the central part of Gdansk (Poland) were analysed for polycyclic aromatic hydrocarbons' (PAHs) content. PAHs were extracted from samples with methylene chloride, then the extracts were subjected to clean-up applying the solid phase extraction (SPE) method. Quantitative and qualitative determination of 16 PAHs was performed with the use of gas chromatography/mass spectrometry technique. A multi-dimensional approach was applied to analyse PAHs' spatial distribution, source, and contamination status. Potential sources of PAHs were verified using isomer ratios supported by a statistical approach. The Σ16PAHs (in mg/kg d.w.) ranged from 1.95 ± 0.64 to 20.4 ± 6.8 for RTs located on the Oliwski Stream and from 0.50 ± 0.17 to 8.6 ± 2.9 for RTs located on the Strzyza Stream. PAHs detected in bottom sediments were mainly composed of 4- and 5-ring compounds. PAH isomer ratios such as Phen/Anth, Flth/Pyr, B(a)A/B(a)A + Chry, Inpy/Inpy + B(ghi)P, Flth/Flth + Pyr, Anth/Anth + Phen, and Flth/Flth + Pyr suggested delivery pathways for biomass, coal, and petroleum combustion. Petrogenic PAHs related to fuel leaks from cars were not detected. Statistical analyses confirmed traffic and heating system sources, while factor analysis (FA) pointed out the abrasion of wasting parts of vehicles. Based on threshold levels presented in sediment quality guidelines (SQGs), in most cases, PAHs were at low levels with occasional negative biological effects on organisms. Only sediments deposited in two RTs located on the Oliwski Stream presented harmful features for sediment-dwelling organisms. The risk assessment performed accordingly to the Σ16PAHs presented a moderate and high risk for biota. This study not only reflects the direct threat related to PAH content in bottom sediments, but also highlights the overall pollution of an area, considered to be a recreational part of the city (Oliwski Stream catchment). The findings of this study highlight the need to launch preventative methods to protect the area against pollution from heating system emission and traffic.

Evaluating heavy metal pollution risks and enzyme activity in soils with intensive hazelnut cultivation under humid ecological conditions

In order to promote sustainable agriculture and ensure food security, it has become more vital to identify the causes of soil pollution in agricultural areas. This study was carried out in order to determine the danger of heavy metal contamination in hazelnut production areas and to take the appropriate actions in accordance with the study's findings. In this context, the main objectives of this study were to (i) determine some physical, chemical, and biological properties and heavy metal concentrations of different soils in intensive hazelnut cultivation areas under humid ecological conditions; (ii) reveal the heavy metal pollution risks of these areas by their enrichment factor, contamination factor, geo-accumulation index, degree of contamination, pollution load index, and potential ecological risk index; (iii) analyze the quality of soils contaminated with heavy metals by their total enzyme activity index and the geometric mean of enzymatic activities; and (iv) explore the correlation between heavy metals and soil enzyme activity indices. According to our results, the average concentrations of heavy metals in the study area ranked as Fe > Mn > Zn > Cr > Ni > Cu > Co > Pb > Cd. Based on EF, the area was evaluated as between deficiency to low enrichment and moderate enrichment for all elements except for Cd. When the parameters used to assess the risk of heavy metal contamination were evaluated, it was determined that the risk of contamination of other elements in the study area, except Cd, was low. Finally, analyzing the heavy metals and soil enzyme activity indices shows that there is a negative correlation between Ni and GMea and TEI.

Trend analysis of anthropogenic activities affecting trace metals deposition in core sediments from the coastal and four rivers estuary of Sarawak, Malaysia

This study reports the concentrations of trace metals in core sediments profile from the coastal and four rivers estuary in the Kuching Division of Sarawak, Malaysia, and the controlling mechanisms influencing their availability in sediments of the studied area. The bonding of trace metals with non-mobile fractions was confirmed with the sequential extraction. Inductively coupled plasma-optical emission spectroscopy (ICP-OES) was used to measure the concentrations of the trace metals. Granulometric analyses were performed using normalized sieve apertures to determine the textural characteristics of the sediments. Enrichment factor was used to evaluate the level of metal enrichment. Heavy metals concentrations in sediment samples varied in the range: Pb (8.9-188.9 mg/kg d.w.), Zn (19.4-431.8 mg/kg d.w.), Cd (0.014-0.061 mg/kg d.w.), Ni (6.6-33.4 mg/kg d.w.), Mn (2.4-16.8 mg/kg d.w.), Cu (9.4-133.3 mg/kg d.w.), Ba (1.3-9.9 mg/kg d.w.), As (0.4-7.9 mg/kg d.w.), Co (0.9-5.1 mg/kg d.w.), Cr (1.4-7.8 mg/kg d.w.), Mg (68.8-499.3 mg/kg d.w.), Ca (11.3-64.9 mg/kg d.w.), Al (24.7-141.7 mg/kg d.w.), Na (8.8-29.4 mg/kg d.w.), and Fe (12,011-35,124.6 mg/kg d.w.). The estimated results of the enrichment factor suggested enrichments of Pb, Zn, and Cu in all the core sediment samples and depths at all sites. The other trace metals showed no enrichments in almost all the sampled stations. Continuous accumulation of Pb, Zn, and Cu metals over a period can be detrimental to living organisms and the ecology. The results obtained from the statistical analyses suggested that the deposition of trace metals in the studied sites is due to anthropogenic inputs from the adjacent land-based sources.

Microbial response and adaption to thallium contamination in soil profiles

Thallium (Tl) is a trace metal with high toxicity. Comprehensive investigation of spatial distribution of Tl and microorganism is still limited in soils from mining area. In this study, 16S rRNA sequencing and network analysis were used for deciphering the co-occurrence patterns of bacterial communities in two different types of soil profiles around a typical Tl-bearing pyrite mine. The results showed that geochemical parameters (such as pH, S, Tl, Fe and TOM) were the driving forces for shaping the vertical distribution of microbial community. According to network analysis, a wide diversity of microbial modules were present in both soil profiles and affected by depth, significantly associated with variations in Tl geochemical fractionation. Phylogenetic information further unveiled that the microbial modules were mainly dominated by Fe reducing bacteria (FeRB), Fe oxidizing bacteria (FeOB), S oxidizing bacteria and Mn reducing bacteria. The results of metagenome indicated that Fe, Mn and S cycle in soil are closely involved in the biogeochemical cycle of Tl. The findings of co-occurrence patterns in the bacterial network and correlation between microorganisms and different geochemical fractions of Tl may benefit the strategy of bioremediation of Tl-contaminated soils with indigenous microbes.

Can Bottom Sediments Be a Prospective Fertilizing Material? A Chemical Composition Analysis for Potential Reuse in Agriculture

Every year, huge amounts of bottom sediments are extracted worldwide, which need to be disposed. The recycling of bottom sediments for soil fertilization is in line with the long-promoted circular economy policy and enables the use of micro and macronutrients accumulated in sediments for soil fertilization. When considering potential agricultural reuse of the dredge sediments, the first necessary step should be to analyze whether the heavy metal content meets the obligatory criteria. Then, the contents of valuable elements required for plant growth and their ratios should be assessed. In this study, the content of nitrogen, organic carbon, phosphorus, and potassium was tested and iron, sulfur, calcium, and magnesium were also analyzed along vertical profiles of sediments extracted from four urban retention tanks in Gdańsk (Poland). The sediments were indicated to have a low content of nutrients (Ntot 0.01–0.52%, Corg 0.1–8.4%, P₂O₅ 0.00–0.65%, K 0.0–1.0%), while being quite rich in Fe and S (0.2–3.3%, 0.0–2.5%, respectively). The C/N ratio changed in the range of 17.4–28.4, which proved good nitrogen availability for plants. The mean values of the Fe/P ratio were above 2.0, which confirms that phosphorus in the sediments would be available to the plants in the form of iron phosphate. To summarize, the bottom sediments from municipal retention reservoirs are not a perfect material for soil fertilization, but they are a free waste material which, when enriched with little cost, can be a good fertilizer. Future research should focus on cultivation experiments with the use of sediments enriched with N, P, Corg.

Ecological risk assessment of heavy metal pollution in sediments of Nile River, Egypt

The Nile River is the soul of Egypt, providing more than 95% of its freshwater demand. However, it receives different pollutants discharged into the water body along its stretch from Aswan (downstream of the High Dam) to Cairo, which is approximately 950 km. Alternatively, sediments play an important role in the dynamics of the entire aquatic environment and act as a sink or a source of pollution in the overlying water under various conditions. This study assessed sediment quality and its heavy metal levels. Several indices and human health risks were determined to assess the potential ecological risk of the Nile River sediment. On the basis of the index results, Cd registered the highest pollution ranking, whereas Fe, Mn, Zn, Cu, and Ni had the lowest effect. In another context, southern sites represented the lowest ecological risk relative to the central and northern sectors. The results of the noncarcinogenic hazard indices, hazard quotient, and hazard index in addition to the lifetime cancer risk were below the acceptable international limits, confirming that there are no adverse effects on the exposed population due to the Nile sediment.

Multi-isotope signatures (Cu, Zn, Pb) of different particle sizes in road-deposited sediments: a case study from industrial area

Road-deposited sediments (RDS) are major sources of heavy metal contamination in urban areas and adversely affect surrounding environments and human health. Multi-isotope combinations (Cu, Zn, and Pb), which serve as environmental tracers, enable the identification and management of metal contaminants in RDS. Here, we present Cu, Zn, and Pb isotopic data for the first time in size-fractionated RDS samples collected from industrial areas to describe the relationship between the RDS and total suspended solids (TSS) in runoff, and to explore the feasibility of using multi-isotopes to identify sources of metal contamination. RDS in the industrial study areas had high concentrations of Cu, Zn, and Pb, and their δ65CuAE647, δ66ZnIRMM3702, and 206Pb/207Pb values ranged from − 0.33 to + 0.73‰, − 0.36 to + 0.01‰, and 1.1418 to 1.1616, respectively. The variation in δ65CuAE647 (δ65Cumax-min) was larger than that of δ66ZnIRMM3702 (i.e., δ66Znmax-min), and the isotope values of Zn and Pb (206Pb/207Pb) tended to increase with the concentrations of these elements. Meanwhile, the fine RDS particles (< 63 µm) had similar Cu, Zn, and Pb isotopic compositions to those of TSS. Hierarchical cluster analyses revealed that the < 63 µm RDS fractions were associated with the TSS. Our results also showed that a combination of Pb and either Cu or Zn could be used to distinguish between RDS and non-exhaust emissions (e.g., brake pads, tires, etc.). Multi-isotope approaches utilizing Cu, Zn, and Pb and more robust isotopic data on individual sources of metal contamination could be useful for identifying pollution sources and understanding their environmental impacts.

Trace Metal Contamination of Bottom Sediments: A Review of Assessment Measures and Geochemical Background Determination Methods

This paper provides an overview of different methods of assessing the trace metal (TM) contamination status of sediments affected by anthropogenic interference. The geochemical background determination methods are also described. A total of 25 papers covering rivers, lakes, and retention tanks sediments in areas subjected to anthropogenic pressure from the last three years (2019, 2020, and 2021) were analysed to support our examination of the assessment measures. Geochemical and ecotoxicological classifications are presented that may prove useful for sediment evaluation. Among the geochemical indices, several individual pollution indices (CF, Igeo, EF, Pi (SPI), PTT), complex pollution indices (PLI, Cdeg, mCdeg, Pisum, PIAvg, PIaAvg, PIN, PIProd, PIapProd, PIvectorM, PINemerow, IntPI, MPI), and geochemical classifications are compared. The ecotoxicological assessment includes an overview of Sediment Quality Guidelines (SQG) and classifications introduced nationally (as LAWA or modified LAWA). The ecotoxicological indices presented in this review cover individual (ERi) and complex indices (CSI, SPI, RAC, PERI, MERMQ). Biomonitoring of contaminated sites based on plant bioindicators is extensively explored as an indirect method for evaluating pollution sites. The most commonly used indices in the reviewed papers were Igeo, EF, and CF. Many authors referred to ecotoxicological assessment via SQG. Moreover, PERI, which includes the toxic response index, was just as popular. The most recognised bioindicators include the Phragmites and Salix species. Phragmites can be considered for Fe, Cu, Cd, and Ni bioindication in sites, while Salix hybrid cultivars such as Klara may be considered for phytostabilisation and rhizofiltration due to higher Cu, Zn, and Ni accumulation in roots. Vetiveria zizanoides demonstrated resistance to As stress and feasibility for the remediation of As. Moreover, bioindicators offer a feasible tool for recovering valuable elements for the development of a circular economy (e.g., rare earth elements).