An innovative swimming pool water quality index (SPWQI) to monitor and evaluate the pools: design and compilation of computational model

Full-scale multisampling and empirical modeling of DBPs in water and air of indoor pools

Disinfection by-products (DBPs) are formed in the water in swimming pools due to reactions between disinfectants (chlorine, bromine, ozone) and the organic matter introduced by bathers and supply water. High concentrations of DBPs are also reported in the air of indoor swimming pools. Based on a robust multisampling program, the levels and variations of DBPs in the air (trichloramine [TCAM] and trihalomethanes [THMs]) and water (THM) were assessed, as well as their precursors (total organic carbon, water temperature, pH, free, and total chlorine) and proxies (CO2 and relative humidity) in four indoor chlorinated swimming pools. High-frequency sampling was conducted during one high-attendance day for each pool. This study focused on parameters that are easy to measure in order to develop models for predicting levels of THMs and TCAM in the air. The results showed that the number of bathers had an important impact on the levels of THMs and TCAM, with a two-to-three-fold increase in air chloroform (up to 110 μg/m3) and a two-to-four-fold increase in TCAM (up to 0.52 mg/m3) shortly after pools opened. The results of this study for the first time showed that CO2 and relative humidity can serve as proxies for monitoring variations in airborne THMs and TCAM. Our results highlight the good predictive capacity of the developed models and their potential for use in day-to-day monitoring. This could help optimize and control DBPs formation in the air of indoor swimming pools and reduce contaminant exposure for both pool employees and users.

Impact of swimming pool water treatment system factors on the content of selected disinfection by-products

Recommendations regarding disinfection by-products (DBPs) in pool waters consider the content of trihalomethanes (THMs) and combined chlorine (CC) as indicators of DBPs based on which the health risk for swimmers and staff of pool facility can be determined. However, the content of DBPs in swimming pools depends on many factors. In this paper, the influence of selected factors (physicochemical parameters of water and technological parameters) on the content of THMs and CC in pool water was determined. During the 6-month period, 9 pools of various functions were analyzed. The water in pools was subjected to the same method of treatment. The content of THMs and CC was compared against the content of organic matter, free chlorine and nitrates, pH, temperature, redox potential and turbidity, technological, and operational parameters. The THM content did not exceed the limit value of 0.1 mg/L. The content of CC varied significantly, from 0.05 to 1.13 mg Cl2/L. It was found that a very large water volume per person, in comparison to a very small one, contributed to the low content of CC and THMs. The high load expressed as m3 of water per person or m2 of water per person and the specific function of hot tubs (HT1 and HT2) led to the average concentration of CC in these pools exceeding 0.3 mg Cl2/L. The THM concentrations in hot tubs (especially in HT1) were also among the largest (0.038-0.058 mg/L). In terms of the analyzed microbiological indicators, the quality of the tested pool water samples was not in doubt. It was found that the purpose of the pool, its volume, and number of swimmers should be the key parameters that determine the choice of methods of water treatment. The research on the pool water quality in the actual working conditions of swimming pool facilities is necessary due to the need to preserve the health safety of swimmers and staff.

Comparative study on the microbial quality in the swimming pools disinfected by the ozone-chlorine and chlorine processes in Tabriz, Iran

Applying a desirable disinfestation process is necessary to control the pathogenic microorganisms in the swimming pools and prevent both dermal and intestinal effects. Therefore, the present study was conducted to compare the bacterial community and diversity in the two swimming pools disinfected by the chlorine and ozone (O₃)-chlorine processes. A total of 24 samples were taken from the two swimming pools in three distinct seasons to analyze the bacterial and physico-chemical indicators. Culture and molecular methods were used to evaluate the microbial quality. Two sets of sample taken from the pools with the maximum swimmer load in the summer were investigated by the next-generation sequencing (NGS) technique. In total, 410 and 406 bacterial species were identified in the chlorine- and ozone-chlorine-disinfected pools, respectively. Among the eight dominant bacterial species in each swimming pool, Pseudomonas alcaliphila, Pseudomonas stutzeri, and Pseudomonas acnes were common species between the two studied pools. Oleomonas sagaranensis (350 reads/18593), Staphylococcus caprae (302 reads /18593), and Anaerococcus octavius (110 reads/18593) were among the dominant bacteria in the chlorine-disinfected pool. Bacterial diversity was lower in the ozone-chlorine-disinfected pool than the other one, and the highest bacterial sequencing belonged to the genus Pseudomonas (85.79%). Results showed that water quality of in O₃-chlorine-disinfected pool was more desirable than the chlorine-disinfected pool. Molecular methods along with conventional culture methods would be advantageous for microbial assessment in the swimming pools.