Evaluation of airborne exposure to volatile organic compounds of benzene, toluene, xylene, and ethylbenzene and its relationship to biological contact index in the workers of a petrochemical plant in the west of Iran

Biomonitoring of Exposures to Solvents and Metals in Electronics Manufacturing Facilities in Batam, Indonesia

Concerns about chemical exposure in the electronics manufacturing industry have long been recognized, but data are lacking in Southeast Asia. We conducted a study in Batam, Indonesia, to evaluate chemical exposures in electronics facilities, using participatory research and biological monitoring approaches. A convenience sample of 36 workers (28 exposed, 8 controls) was recruited, and urine samples were collected before and after shifts. Five solvents (acetone, methyl ethyl ketone, toluene, benzene, and xylenes) were found in 46%-97% of samples, and seven metals (arsenic, cadmium, cobalt, tin, antimony, lead, and vanadium) were detected in 60%-100% of samples. Biological monitoring and participatory research appeared to be useful in assessing workers' exposure when workplace air monitoring is not feasible due to a lack of cooperation from the employer. Several logistical challenges need to be addressed in future biomonitoring studies of electronics workers in Asia in factories where employers are reluctant to track workers' exposure and health.

Adsorption Phenomenon of VOCs Released from the Fiber-Reinforced Plastic Production onto Carbonaceous Surface

The manufacturing of fiber-reinforced plastics has been linked to the discharge of volatile organic compounds (VOCs), particularly toluene and benzene, which have been identified as posing substantial risks to human health and the environment. To counteract this issue, activated carbons have been suggested as a means of reducing VOC emissions through adsorption. The objective of this study was to investigate the adsorption characteristics of toluene and benzene onto activated carbons produced from coal (AC) and coconut shells (CAC). The study was carried out in an aqueous medium. The findings revealed that the AC sample with higher surface characteristics exhibited a higher adsorption capacity (toluene: 196.0784 mg g−1 and benzene: 181.8182 mg g−1) in comparison to the CAC sample (toluene: 135.1351 mg g−1 and benzene: 116.2791 mg g−1). The superior adsorption performance of AC on both VOCs can be attributed to its higher surface characteristics. The Langmuir model was found to be more appropriate than the Freundlich model, as indicated by the higher coefficient of determination (R2) value of the Langmuir isotherm (avg. R2 = 0.9669) compared to that of the Freundlich isotherm (avg. R2 = 0.9654), suggesting the use of a monolayer adsorption mechanism. The adsorption kinetics of the samples were analyzed using the pseudo-first-order and pseudo-second-order models, and the former was found to be more fitting, indicating that the rate of adsorption is directly proportional to the concentration difference between the solution and the sample surface. The adsorption process was found to be spontaneous and favorable based on the positive value of ΔG_ads. Furthermore, the adsorption process was endothermic and disordered, as indicated by the positive values of ΔH_ads and ΔS_ads. The regeneration efficiency of all the samples was secured more than 95% upon the fifth cycle.

Occupational exposure to BTEX and styrene in West Asian countries: a brief review of current state and limits

The aim of introducing occupational exposure limits (OELs) is to use them as a risk management tool in order to protect workers' health and well-being against harmful agents at the workplace. In this review we identify OELs for benzene, toluene, ethylbenzene, xylene (BTEX), and styrene concentrations in air and assess occupational exposure to these compounds through a systematic literature search of publications published in West Asian countries from 1980 to 2021. OELs for BTEX and styrene have been set in Iran and Turkey to levels similar to those in European countries and the US. The search yielded 49 full-text articles that cover studies of exposure assessment in six countries, but most (n=40) regard Iran. Average occupational exposure to benzene of workers in oil-related industries is higher than recommended OEL, while average occupational exposure to other compounds is lower than local OELs (where they exist). Currently, information about levels of occupational exposure to BTEX and styrene is insufficient in West Asian countries, which should be remedied through OEL regulation and application. Furthermore, coherent research is also needed to determine actual levels of occupational exposure, dose-responses, and the economic and technical capacity of local industries to address current issues.