Wall thickness of the pulmonary vein-left atrial junction rather than electrical information as the major determinant of dormant conduction after contact force-guided pulmonary vein isolation

Voltage-guided pulmonary vein isolation for atrial fibrillation

BACKGROUND

Bipolar voltage amplitude is capable of helping determine the ideal lesion size index (LSI) setting during radiofrequency ablation for atrial fibrillation (AF).

OBJECTIVE

We aimed to determine whether voltage-guided pulmonary vein isolation (PVI) is noninferior to conventional LSI-guided PVI in patients with nonvalvular AF.

METHODS

This was a multicenter randomized trial conducted during a period of 12 months. The primary efficacy end points of the study were AF recurrence, atrial flutter, and atrial tachycardia, and the noninferiority margin was set at a hazard ratio of 1.4. The primary safety end point was a composite of procedure-related complications.

RESULTS

A total of 370 patients underwent randomization; 189 and 181 were assigned to the voltage (underwent voltage-guided PVI) and control (underwent conventional LSI-guided PVI) groups, respectively. The primary efficacy end point occurred in 22 patients (12.0%) in the voltage group and 23 patients (12.9%) in the control group (1-year Kaplan-Meier event-free rate estimates, 88.0% and 87.1%, respectively; hazard ratio, 1.00; 95% confidence interval, 0.80-1.25). The primary safety end points were 4.8% in the voltage group and 6.6% in the control group (P = .2791). PVI time was significantly shorter in the voltage group (35.7 ± 14.5 minutes vs 39.7 ± 14.7 minutes; P < .001).

CONCLUSION

Voltage-guided PVI was noninferior to conventional LSI-guided PVI with respect to efficacy in the treatment of patients with AF, and its use significantly reduced procedure time. UMIN Clinical Trials Registry: UMIN000042325.

In Vivo Tissue Temperature Characteristics of Contact Force Catheter With a Mesh-Shaped Irrigation Tip: A Porcine Study

BACKGROUND

Neither the actual in vivo tissue temperatures reached with a novel contact force sensing catheter with a mesh-shaped irrigation tip (TactiFlex SE, Abbott) nor the safety profile has been elucidated.

METHODS

In a porcine model (n = 8), thermocouples were implanted epicardially in the superior vena cava, right pulmonary vein, and esophagus close to the inferior vena cava following a right thoracotomy. After chest closure, endocardial ablation was conducted near the thermocouples under fluoroscopic guidance. We compared tissue temperatures during 50 W/13-s high-power short-duration (HPSD) and 30 W/30-s standard ablation.

RESULTS

No steam pops were observed in 34 HPSD and 35 standard ablation applications. Tmax (maximum tissue temperature when the thermocouple was located ≤5 mm from the catheter tip) was modestly higher in HPSD compared to standard ablation (60.1°C ± 12.4°C vs. 57.8°C ± 12.9°C; p = 0.46). The peak tissue temperature correlated inversely with the catheter tip-to-thermocouple distance (HPSD: r = -0.40; standard: r = -0.57). Lethal temperatures (≥50°C) were reached faster with HPSD (6.5 ± 3.2 s vs. 10.3 ± 8.6 s; p = 0.04) and the distance from the catheter tip achieving a lethal tissue temperature ≥50°C (indicative of the lesion depth) was slightly shallower with HPSD (4.2 and 4.8 mm, respectively). The esophageal injury occurred superficially in both settings (0.98 ± 0.22 mm vs. 1.16 ± 0.18 mm; p = 0.29).

CONCLUSIONS

HPSD ablation produced a modestly higher and more rapid increase in the tissue temperature around the veno-atrial junction with a shorter catheter tip-to-thermocouple distance required to reach lethal temperatures. This data contributes to understanding effective lesion creation and collateral injury prevention with the TactiFlex catheter.

Where is the gap after a 90 W/4 s very-high-power short-duration ablation of atrial fibrillation?: Association with the left atrial-pulmonary vein voltage and wall thickness

Background

Although pulmonary vein isolation (PVI) for atrial fibrillation (AF) utilizing radiofrequency (RF) applications with a very high-power and short-duration (vHPSD) has shortened the procedure time, the determinants of pulmonary vein (PV) gaps in the first-pass PVI and acute PV reconnections are unclear.

Methods

An extensive encircling PVI was performed with the QDOT MICRO catheter with a vHPSD (90 W-4 s) in 30 patients with AF (19 men, 64 ± 10 years). The association of the PV gap sites (first-pass PVI failure, acute PV reconnections [spontaneous reconnections or dormant conduction provoked by adenosine triphosphate] or both) with the left atrial (LA) wall thickness and LA bipolar voltage on the PVI line and ablation-related parameters were assessed.

Results

PV gaps were observed in 29 (6%) of 480 segments (16 segments per patient) in 17 patients (56%). The PV gaps were associated with the LA wall thickness, bipolar voltage, and the number of RF points (LA wall thickness, 2.5 ± 0.5 vs. 1.9 ± 0.4 mm, p < .001; bipolar voltage, 2.59 ± 1.62 vs. 1.34 ± 1.14 mV, p < .001; RF points, 6 ± 2 vs. 4 ± 2, p = .008) but were not with the other ablation-related parameters. Receiver operating characteristic curves yielded that an LA wall thickness ≥2.3 mm and bipolar voltage ≥2.40 mV were determinants of PV gaps with an area under the curve of 0.82 and 0.73, respectively.

Conclusions

The LA voltage and wall thickness on the PV-encircling ablation line were highly associated with PV gaps using the 90 W/4 s-vHPSD ablation.

Design and preliminary validation of a high-fidelity vascular simulator for robot-assisted manipulation

The number of robot-assisted minimally invasive surgeries is increasing annually, together with the need for dedicated and effective training. Surgeons need to learn how to address the novel control modalities of surgical instruments and the loss of haptic feedback, which is a common feature of most surgical robots. High-fidelity physical simulation has proved to be a valid training tool, and it might help in fulfilling these learning needs. In this regard, a high-fidelity sensorized simulator of vascular structures was designed, fabricated and preliminarily validated. The main objective of the simulator is to train novices in robotic surgery to correctly perform vascular resection procedures without applying excessive strain to tissues. The vessel simulator was integrated with soft strain sensors to quantify and objectively assess manipulation skills and to provide real-time feedback to the trainee during a training session. Additionally, a portable and user-friendly training task board was produced to replicate anatomical constraints. The simulator was characterized in terms of its mechanical properties, demonstrating its realism with respect to human tissues. Its face, content and construct validity, together with its usability, were assessed by implementing a training scenario with 13 clinicians, and the results were generally positive.

Characteristics of tissue temperature during ablation with THERMOCOOL SMARTTOUCH SF versus TactiCath versus QDOT MICRO catheters (Qmode and Qmode+): An in vivo porcine study

INTRODUCTION

High-power short-duration (HPSD) ablation at 50 W, guided by ablation index (AI) or lesion size index (LSI), and a 90 W/4 s very HSPD (vHPSD) setting are available for atrial fibrillation (AF) treatment. Yet, tissue temperatures during ablation with different catheters around venoatrial junction and collateral tissues remain unclear.

METHODS

In this porcine study, we surgically implanted thermocouples on the epicardium near the superior vena cava (SVC), right pulmonary vein, and esophagus close to the inferior vena cava. We then compared tissue temperatures during 50W-HPSD guided by AI 400 or LSI 5.0, and 90 W/4 s-vHPSD ablation using THERMOCOOL SMARTTOUCH SF (STSF), TactiCath ablation catheter, sensor enabled (TacthCath), and QDOT MICRO (Qmode and Qmode+ settings) catheters.

RESULTS

STSF produced the highest maximum tissue temperature (Tmax ), followed by TactiCath, and QDOT MICRO in Qmode and Qmode+ (62.7 ± 12.5°C, 58.0 ± 10.1°C, 50.0 ± 12.1°C, and 49.2 ± 8.4°C, respectively; p = .005), achieving effective transmural lesions. Time to lethal tissue temperature ≥50°C (t-T ≥ 50°C) was fastest in Qmode+, followed by TacthCath, STSF, and Qmode (4.3 ± 2.5, 6.4 ± 1.9, 7.1 ± 2.8, and 7.7 ± 3.1 s, respectively; p < .001). The catheter tip-to-thermocouple distance for lethal temperature (indicating lesion depth) from receiver operating characteristic curve analysis was deepest in STSF at 5.2 mm, followed by Qmode at 4.3 mm, Qmode+ at 3.1 mm, and TactiCath at 2.8 mm. Ablation at the SVC near the phrenic nerve led to sudden injury at t-T ≥ 50°C in all four settings. The esophageal adventitia injury was least deep with Qmode+ ablation (0.4 ± 0.1 vs. 0.8 ± 0.4 mm for Qmode, 0.9 ± 0.3 mm for TactiCath, and 1.1 ± 0.5 mm for STSF, respectively; p = .005), correlating with Tmax .

CONCLUSION

This study revealed distinct tissue temperature patterns during HSPD and vHPSD ablations with the three catheters, affecting lesion effectiveness and collateral damage based on Tmax and/or t-T ≥ 50°C. These findings provide key insights into the safety and efficacy of AF ablation with these four settings.

In vivo tissue temperatures during 90 W/4 sec-very high power-short-duration (vHPSD) ablation versus ablation index-guided 50 W-HPSD ablation: A porcine study

INTRODUCTION

Neither the actual in vivo tissue temperatures reached with 90 W/4 s-very high-power short-duration (vHPSD) ablation for atrial fibrillation nor the safety and efficacy profile have been fully elucidated.

METHODS

We conducted a porcine study (n = 15) in which, after right thoracotomy, we implanted 6-8 thermocouples epicardially in the superior vena cava, right pulmonary vein, and esophagus close to the inferior vena cava. We compared tissue temperatures close to a QDOT MICRO catheter, between during 90 W/4 s-vHPSD ablation during ablation index (AI: target 400)-guided 50 W-HPSD ablation, both targeting a contact force of 8-15 g.

RESULTS

Maximum tissue temperature reached during 90 W/4 s-vHPSD ablation did not differ significantly from that during 50 W-HPSD ablation (49.2 ± 8.4°C vs. 50.0 ± 12.1°C; p = .69) and correlated inversely with distance between the catheter tip and the thermocouple, regardless of the power settings (r = -0.52 and r = -0.37). Lethal temperature (≥50°C) was best predicted at a catheter tip-to-thermocouple distance cut-point of 3.13 and 4.27 mm, respectively. All lesions produced by 90 W/4 s-vHPSD or 50 W-HPSD ablation were transmural. Although there was no difference in the esophageal injury rate (50% vs. 66%, p = .80), the thermal lesion was significantly shallower with 90 W/4 s-vHPSD ablation than with 50W-HPSD ablation (381.3 ± 127.3 vs. 820.0 ± 426.1 μm from the esophageal adventitia; p = .039).

CONCLUSION

Actual tissue temperatures reached with 90 W/4 s-vHPSD ablation appear similar to those with AI-guided 50 W-HPSD ablation, with the distance between the catheter tip and target tissue being shorter for the former. Although both ablation settings may create transmural lesions in thin atrial tissues, any resulting esophageal thermal lesions appear shallower with 90 W/4 s-vHPSD ablation.

In vivo tissue temperature during lesion size index-guided 50W ablation versus 30W ablation: A porcine study

BACKGROUND

Neither the actual in vivo tissue temperatures reached with lesion size index (LSI)-guided high-power short-duration (HPSD) ablation for atrial fibrillation nor the safety profile has been elucidated.

METHODS

We conducted a porcine study (n = 7) in which, after right thoracotomy, we implanted 6-8 thermocouples epicardially in the superior vena cava, right pulmonary vein, and esophagus close to the inferior vena cava. We compared tissue temperatures reached during 50 W-HPSD ablation with those reached during standard (30 W) ablation, both targeting an LSI of 5.0 (5-15 g contact force).

RESULTS

T_max  (maximum tissue temperature when the thermocouple was located ≤5 mm from the catheter tip) reached during HPSD ablation was modestly higher than that reached during standard ablation (58.0 ± 10.1°C vs. 53.6 ± 9.2°C; p = .14) and peak tissue temperature correlated inversely with the distance between the catheter tip and the thermocouple, regardless of the power settings (HPSD: r = -0.63; standard: r = -0.66). Lethal temperature (≥50°C) reached 6.3 ± 1.8 s and 16.9 ± 16.1 s after the start of HPSD and standard ablation, respectively (p = .002), and it was best predicted at a catheter tip-to-thermocouple distance cut point of 2.8 and 5.3 mm, respectively. All lesions produced by HPSD ablation and by standard ablation were transmural. There was no difference between HPSD ablation and standard ablation in the esophageal injury rate (70% vs. 75%, p = .81), but the maximum distance from the esophageal adventitia to the injury site tended to be shorter (0.94 ± 0.29 mm vs. 1.40 ± 0.57 mm, respectively; p = .09).

CONCLUSIONS

Actual tissue temperatures reached with LSI-guided HPSD ablation appear to be modestly higher, with a shorter distance between the catheter tip and thermocouple achieving lethal temperature, than those reached with standard ablation. HPSD ablation lasting <6 s may help minimize lethal thermal injury to the esophagus lying at a close distance.

Impact of cryoballoon contact angle and acute myocardial injury on pulmonary vein reconnection

At present, it remains unclear whether the effect on cryoinjury can be strongly exerted by contact of the balloon with the pulmonary vein (PV) ostium. The present study included 204 paroxysmal atrial fibrillation (PAF) patients who underwent an initial pulmonary vein isolation (PVI) using a cryoballoon from the Osaka Rosai Atrial Fibrillation ablation (ORAF) registry. The total balloon contact angle was measured from the equator line (sum of the angles of the upper side and bottom side in all PVs) under fluoroscopic imaging. The patients were stratified into three tertile groups according to the total balloon contact angle. We evaluated the relationship between the total balloon contact angle and clinical outcomes, including the value of acute myocardial injury marker (high-sensitive cardiac troponin I [hs-TnI]), arrhythmia recurrence, and PV reconnections in the repeated ablation. The total balloon contact angle was significantly associated with the hs-TnI value among the tertile groups (p < 0.001) and a multiple regression analysis showed that the total balloon contact angle significantly correlated with the hs-TnI value (standardized beta-coefficient = 0.572, p < 0.001). The balloon contact angle in PVs with PV reconnections was significantly lower than in those without (p = 0.044), while no significant differences in the recurrence of atrial fibrillation among the tertile groups were observed in the enrolled patients. The total balloon contact angle was significantly associated with the acute myocardial injury marker, hs-TnI. The total balloon contact angle was significantly associated with PV reconnections after cryoballoon ablation in patients who underwent a repeat ablation.

Actual tissue temperature during ablation index-guided high-power short-duration ablation versus standard ablation: Implications in terms of the efficacy and safety of atrial fibrillation ablation

BACKGROUND

Actual in vivo tissue temperatures and the safety profile during high-power short-duration (HPSD) ablation of atrial fibrillation have not been clarified.

METHODS

We conducted an animal study in which, after a right thoracotomy, we implanted 6-8 thermocouples epicardially in the superior vena cava, right pulmonary vein, and esophagus close to the inferior vena cava. We recorded tissue temperatures during a 50 W-HPSD ablation and 30 W-standard ablation targeting an ablation index (AI) of 400 (5-15 g contact force).

RESULTS

Maximum tissue temperatures reached with HSPD ablation were significantly higher than that reached with standard ablation (62.7 ± 12.5 vs. 52.7 ± 11.4°C, p = 0.033) and correlated inversely with the distance between the catheter tip and thermocouple, regardless of the power settings (HPSD: r = -0.71; standard: r = -0.64). Achievement of lethal temperatures (≥50°C) was within 7.6 ± 3.6 and 12.1 ± 4.1 s after HPSD and standard ablation, respectively (p = 0.003), and was best predicted at cutoff points of 5.2 and 4.4 mm, respectively. All HPSD ablation lesions were transmural, but 19.2% of the standard ablation lesions were not (p = 0.011). There was no difference between HPSD and standard ablation regarding the esophageal injury rate (30% vs. 33.3%, p > 0.99), with the injury appearing to be related to the short distance from the catheter tip.

CONCLUSIONS

Actual tissue temperatures reached with AI-guided HPSD ablation appeared to be higher with a greater distance between the catheter tip and target tissue than those with standard ablation. HPSD ablation for <7 s may help prevent collateral tissue injury when ablating within a close distance.

Modified ablation index: a novel determinant of a successful first-pass left atrial posterior wall isolation

Although a left atrial posterior wall isolation (LAPWI) in addition to a pulmonary vein isolation is a well-accepted option for persistent atrial fibrillation (AF), a complete isolation can be challenging. This study aimed to evaluate the performance of a modified ablation index (AI) (AI/bipolar voltage along the ablation line) for predicting a durable LAPWI. The study included 55 consecutive patients, aged 65 ± 11 years, who underwent an electroanatomic mapping-guided LAPWI of AF. The association between the gaps (first-pass LAPWI failure and/or acute LAPW reconnections), voltage amplitude along the roof and floor lines, and thickness of the LAPW was investigated. Gaps occurred in 22 patients (40%) and in 26 (8%) of the 330 line segments. Gaps were associated with a relatively high bipolar voltage (3.38 ± 1.83 vs. 1.70 ± 1.12 mV, P < 0.0001) and thick LA wall (2.52 ± 1.15 vs. 1.42 ± 0.44 mm, P < 0.0001). A modified AI ≤ 199 AU/mV, bipolar voltage ≥ 2.64 mV, wall thickness ≥ 2.04 mm, and roof ablation line ≥ 43.4 mm well predicted gaps (AUCs: 0.783, 0.787, 0.858, and 0.752, respectively). A high-voltage zone, thick LAPW, and long roof ablation line appeared to be determinants of gaps, and a modified AI ≥ 199 AU/mV along the ablation lines appeared to predict an acute durable LAPWI.

Left atrial wall thickness and its relationship with reconnection after pulmonary vein isolation in patients with atrial fibrillation evaluated using a three-dimensional wall thickness map

Background

The major cause of recurrence after pulmonary vein (PV) isolation for atrial fibrillation (AF) is PV reconnection, and thicker wall could be associated with reconnection.

Objectives

This study aimed to evaluate the wall thickness of the PV antrum in reconnection sites using a three-dimensional (3D) wall thickness map.

Methods

A total of 91 patients who underwent a second ablation procedure due to AF recurrence were evaluated. The locations of the PV reconnection sites were confirmed in electroanatomical maps. A 3D atrial wall thickness (AWT) map was created using computed tomography scan data. The AWT values of the ablation lines of the index procedure were graded in each segment of the PV antrum: grade 1, 0.5 < AWT ≤ 1.0 mm; grade 2, 1.0 < AWT ≤ 1.5 mm; grade 3, 1.5 < AWT ≤ 2.0 mm; grade 4, 2.0 < AWT ≤ 2.5 mm; grade 5, AWT > 2.5 mm.

Results

A total of 281 PV reconnection sites among 1256 segments of the PV antrum in 79 patients were detected. The average AWT grades were 2.7 ± 1.0 and 2.2 ± 1.0 in the reconnected and non-reconnected segments, respectively (P < 0.01). Higher AWT grades were observed in the reconnected superior segments of the left superior PV, carina and inferior segments of the left inferior PV, superior and posterior segments of the right superior PV, and posterior and inferior segments of the right inferior PV.

Conclusion

The reconnected segments of the PV antrum showed thicker myocardium than the non-reconnected ones in patients with recurrent AF after catheter ablation. A wall thickness map for PV isolation could be considered for customized ablation in order to reduce PV reconnection.

Relationship of Catheter Contact Angle and Contact Force with Contact Area on the Surface of Heart Muscle Tissue in Cardiac Catheter Ablation

Purpose

The aims of this study were to develop an experimental procedure for setting the catheter angle with respect to the surface of the heart muscle and the catheter contact force and to investigate the catheter contact area on the heart muscle as a function of catheter contact angle and force.

Methods

Visualization tests were performed for 5 contact angles (0°, 30°, 45°, 60°, and 90°) and 8 contact forces (2, 4, 6, 10, 15, 20, 30, and 40 gf). Each experiment was repeated 6 times with 2 different commercially available catheter tips.

Results

The morphology of the contact area was classified into rectangular, circular, ellipsoidal, and semi-ellipsoidal. The correlation between contact force and contact area was a logarithmic function; increasing contact force was associated with increased contact area. At the same contact force, the correlation between contact angle and contact area was inverse; decreasing contact angle was associated with a corresponding increase in contact area.

Conclusion

Both the catheter contact angle and contact force substantially impact the contact area and morphology in catheter ablation procedures.

Impact of the combined use of intracardiac ultrasound and a steerable sheath visualized by a 3D mapping system on pulmonary vein isolation

BACKGROUND

A novel steerable sheath visualized on a three-dimensional mapping system has become available in this era in which a durable pulmonary vein (PV) isolation (PVI) with reduced fluoroscopy is required.

METHODS

In 60 patients who underwent a PVI with a visualized sheath (n = 30) and non-visualized conventional sheath (n = 30), the fluoroscopic time and catheter stability during the PVI were analyzed.

RESULTS

The fluoroscopic time during the transseptal access (0 [0, 0.1] vs. 1.4 [0.8, 2.3] minutes, P < .001) and PVI (0 [0, 0.1] vs. 0.4 [0.2, 1.1] minutes, P < .001) were shorter in the visualized sheath group than conventional sheath group. The procedure time during the PVI (32.0 [26.8, 36.3] vs. 41.0 [31.8, 47.3] minutes, P = .01), particularly during the right PVI (15.0 [12.8, 18.0] vs. 23.0 [15.8, 26.3] minutes, P = .009), was shorter in the visualized sheath group than conventional sheath group, however, that during the other steps was equivalent. The standard deviation of the catheter contact force during each radiofrequency application was smaller in the visualized sheath group than conventional sheath group (4.5 ± 2.7 vs. 4.9 ± 3.1 g, P = .001). The impedance drop for each lesion was larger in the visualized sheath group than conventional sheath group (10.7 ± 6.5 vs. 9.8 ± 5.5 ohms, P < .001). The incidence of acute PV reconnections per patient (30% vs. 23%, P = .56) and per PV segment (2.5% vs. 2.3%, P = .83) were similar between the two groups. No major complications occurred in either sheath group.

CONCLUSIONS

The use of visualized sheaths may reduce the fluoroscopic time and improve the catheter stability during the PVI.

Tailored ablation index for pulmonary vein isolation according to wall thickness within the ablation circle

BACKGROUND

Ablation index (AI), a novel lesion quality marker, includes contact force, time, and power of radiofrequency (RF) application, but not regional variation in wall thickness within the wide antral catheter ablation (WACA) circle. This study explored the relationships among AI target value, atrial wall thickness, and gap formation within the WACA circle in patients with paroxysmal atrial fibrillation (PAF).

METHODS

We evaluated 102 consecutive patients (mean age, 65 ± 9 years) with PAF who underwent AI-guided WACA for ipsilateral pulmonary vein isolation (PVI). Each WACA circle was subdivided into eight segments, and overall 7143 RF applications were delivered, including 125 gaps in PVI ablation lines. For each RF tag within the ablation circle, we collected data on ablation lesion depth surrogates (time of application, delivery power, impedance drop, average contact force, force-time integral [FTI], and AI) and left atrial wall thickness measured by multidetector computer tomography scanning.

RESULTS

The anterior and roof walls were the thickest segments of the ablation circle, in which 85.8% of gaps concentrated, while the posterior and inferior walls were the thinnest. Gap formation was significantly associated with FTI, AI, wall thickness, FTI/wall thickness, and AI/wall thickness. AI/wall thickness had the highest predictive value for gap formation, with a cutoff of 195.6 au/mm for effective ablation.

CONCLUSIONS

In AI-guided PVI of PAF, AI/wall thickness by normalizing myocardial thickness variation along the WACA circle was a strong predictor of gap formation, with a target of 195.6 au/mm appearing suitable for effective ablation.

One-year outcome and durability of pulmonary vein isolation after prospective use of ablation index for catheter ablation in patients with persistent atrial fibrillation

BACKGROUND

Radiofrequency (RF) catheter ablation for persistent atrial fibrillation (peAF) is associated with less favorable outcomes than for paroxysmal AF (PAF). Recent studies have shown improved clinical outcomes with use of ablation index (AI) targets for pulmonary vein isolation (PVI) in PAF. AI is a novel ablation quality marker that incorporates contact force (CF), time, and power in a weighted formula. This is a single-arm registry to investigate the 1-year efficacy of AF ablation guided by the AI in patients with peAF, and further to evaluate pulmonary vein reconduction at repeat electrophysiology study in case of recurrent AF.

METHODS

In total, 55 consecutive patients (69 ± 10 years, 55% male, median time since first AF diagnosis: 31 months (Q1-Q3: 10-70)) with peAF underwent AIguided PVI using a CF surround-flow catheter. AI targets were 600 for anterior and 450 for roof/posterior/inferior antral segments. Patients were monitored for atrial tachyarrhythmia recurrence using 5-day Holter-ECG recordings at 3, 6, and 12 months.

RESULTS

The median procedure time was 173 min (Q1-Q3: 152-204). The median fluoroscopy time was 4 min (Q1-Q3: 3-6) and the median fluoroscopy dose was 2.64 Gy/cm2 (Q1-Q3: 1.04-3.99). The median ablation time was 57 min (Q1-Q3: 47-63). At 12 months, 42% of the patients were in sinus rhythm. AF recurrence was seen in 58% of patients. No major complications occurred.

CONCLUSIONS

RF ablation using AI in peAF is a feasible and safe technique. At 1 year, AI-guided ablation was associated with AF recurrence in 58% of the patients.

Impact of local left atrial wall thickness on the incidence of acute pulmonary vein reconnection after Ablation Index-guided atrial fibrillation ablation

•

Ablation Index-guided ablation allows for ablation lesions of consistent depth.

•

Ablation Index-guided ablation is limited by ignoring local wall thickness.

•

Local atrial wall thickness is associated with acute pulmonary vein reconnection.

•

Wall thickness adjusted Ablation Index targets may improve ablation outcomes.

Background

Although Ablation Index (AI)-guided ablation facilitates creation of lesions of consistent depth, pulmonary vein (PV) reconnection is still commonly observed after AI-guided pulmonary vein isolation (PVI). The present study aimed to investigate the impact of local left atrial wall thickness on the incidence of acute PV reconnection after AI-guided atrial fibrillation (AF) ablation.

Methods and results

Seventy patients (63% paroxysmal AF, 67% male, mean age 63 ± 8 years) who underwent preprocedural CT imaging and AI-guided AF ablation were studied. Occurrence of acute PV reconnection after initial PVI was assessed after a 30-minute waiting period. Ablation procedures were retrospectively analyzed and each ablation circle was subdivided into 8 segments. Minimum AI, force-time integral, contact force, ablation duration, power, impedance drop and maximum interlesion distance were determined for each segment. PV antrum wall thickness was assessed for each segment on reconstructed CT images based on patient-specific thresholds in Hounsfield Units. Acute reconnection occurred in 27/1120 segments (2%, 15 anterior/roof, 12 posterior/inferior) in 19/140 ablation circles (14%). Reconnected segments were characterized by a greater local atrial wall thickness, both in anterior/roof (1.87 ± 0.42 vs. 1.54 ± 0.42 mm; p < 0.01) and posterior/inferior (1.43 ± 0.20 vs. 1.16 ± 0.22 mm; p < 0.01) segments. Minimum AI, force-time integral, contact force, ablation duration, power, impedance drop and maximum interlesion distance were not associated with acute reconnection.

Conclusions

Local atrial wall thickness is associated with acute pulmonary vein reconnection after AI-guided PVI. Individualized AI targets based on local wall thickness may be of use to create transmural ablation lesions and prevent PV reconnection after PVI.

Role of Contact Force Sensing in Catheter Ablation of Cardiac Arrhythmias: Evolution or History Repeating Itself?

Adequate catheter-tissue contact facilitates efficient heat energy transfer to target tissue. Tissue contact is thus critical to achieving lesion transmurality and success of radiofrequency (RF) ablation procedures, a fact recognized more than 2 decades ago. The availability of real-time contact force (CF)-sensing catheters has reinvigorated the field of ablation biophysics and optimized lesion formation. The ability to measure and display CF came with the promise of dramatic improvement in safety and efficacy; however, CF quality was noted to have just as important an influence on lesion formation as absolute CF quantity. Multiple other factors have emerged as key elements influencing effective lesion formation, including catheter stability, lesion contiguity and continuity, lesion density, contact homogeneity across a line of ablation, spatiotemporal dynamics of contact governed by cardiac and respiratory motion, contact directionality, and anatomic wall thickness, in addition to traditional ablation indices of power and RF duration. There is greater appreciation of surrogate markers as a guide to lesion formation, such as impedance fall, loss of pace capture, and change in unipolar electrogram morphology. In contrast, other surrogates such as tactile feedback, catheter motion, and electrogram amplitude are notably poor predictors of actual contact and lesion formation. This review aims to contextualize the role of CF sensing in lesion formation with respect of the fundamental principles of biophysics of RF ablation and summarize the state-of-the-art evidence behind the role of CF in optimizing lesion formation.

The modified ablation index: a novel determinant of acute pulmonary vein reconnections after pulmonary vein isolation

BACKGROUND

Although pulmonary vein isolation (PVI) guided by the ablation index (AI) has been well-developed, acute PV reconnections (PVRs) still occur. This study aimed to compare the prognostic performance of the modified AI and its optimal cut-off value for the prediction of acute PVRs to ensure durable PVI.

METHODS

Three-dimensional left atrium (LA) voltage maps created before an extensive encircling PVI in 64 patients with atrial fibrillation (AF) (45 men, 62 ± 10 years) were examined for an association between electrogram voltage amplitude recorded from the PV-LA junction and acute post-PVI PVRs (spontaneous PVRs and/or ATP-provoked dormant PV conduction).

RESULTS

Acute PVRs were observed in 22 patients (34%) and 33 (3%) of the 1012 PV segments. Acute PVRs were significantly associated with segments with higher bipolar voltage zones (3.23 ± 1.17 vs. 1.97 ± 1.20 mV, P < 0.0001), lower mean AI values (449 [428-450] vs. 460 [437-486], P = 0.05), and radiofrequency lesion gaps ≥ 6 mm (48 vs. 32%, P = 0.04), but not with contact force, force-time integral, or power. We created the modified AI calculated as AI/LA bipolar voltage, and found it to be significantly lower in areas with acute PVRs than in those without (152 [109-185] vs. 256 [176-413] AU/mV, P < 0.0001). Univariate analysis showed the prognostic performance of the modified AI, with an area under the curve of 0.801 (0.775-0.825), to be the highest of all the significant parameters.

CONCLUSIONS

Low values of the novel modified AI on the PV-encircling ablation line were strongly associated with acute PVRs.

Influence of balloon temperature and time to pulmonary vein isolation on acute pulmonary vein reconnection and clinical outcomes after cryoballoon ablation of atrial fibrillation

BACKGROUND

Limited data exist on indicators of durable pulmonary vein isolation (PVI) undergoing cryoballoon ablation (CBA) for atrial fibrillation (AF). We investigated whether balloon temperature and time to PVI can be used to predict early PV reconduction (EPVR), including residual PV conduction and adenosine triphosphate-induced dormant conduction and the relation between touch-up ablation of EPVR sites and mid-term recurrence of AF.

METHODS

We obtained procedural and outcome data from the records of 130 consecutive patients who underwent CBA and followed up for 13.4 months.

RESULTS

EPVR was identified in 86 (17%) PVs of 61 (47%) patients. Balloon temperatures during 30 seconds (-27 ± 5.7°C vs -31 ± 5.5°C), 60 seconds (-36 ± 5.6°C vs -41 ± 5.4°C), and at the nadir point (-41 ± 7.4°C vs -49 ± 7.0°C) were significantly higher, and the time to PVI was longer (90 ± 50 seconds vs 52 ± 29 seconds) in PVs with EPVR than in those without (P < 0.0001 for all). Among PVs without EPVR, the time to PVI was longer and balloon temperature was lower for the left superior pulmonary vein/ right inferior pulmonary vein (LSPV/RIPV) than for the right superior pulmonary vein/left inferior pulmonary vein (RSPV/LIPV) (time: 60 ± 25/73 ± 37 seconds vs 41 ± 31/45 ± 20 seconds, P < 0.0001) (temp: -39.2 ± 11.3/-39.4 ± 8.3°C vs -33.8 ± 10.6/-33.6 ± 6.8°C, P = 0.0023). AF recurrence rates were equivalent between patients with and without EPVR (13% [8/69] vs 15% [9/61], P = 0.845).

CONCLUSIONS

Cryoballoon temperature and time to PVI appear to be useful in predicting durable PVI, that is, prevention of EPVR, but the balloon temperature and time required for PVI differ between PVs. Although EPVR does not predict AF recurrence, high success rates can be expected when touch-up ablation of EPVR sites is performed.

'CLOSE'-Guided Pulmonary Vein Isolation and Changes in Local Bipolar and Unipolar Atrial Electrograms: Observations from the EP Lab

Background

'CLOSE'-guided pulmonary vein isolation (PVI) is a point-by-point, contact force (CF)-guided radiofrequency (RF) approach aiming to enclose the PVs with contiguous RF lesions by targeting strict criteria for interlesion distance and ablation index (AI). We characterized real-time changes in bipolar (B-EGMs) and unipolar electrograms (U-EGMs) during AI-targeted RF delivery.

Methods

EGM changes during 56 RF applications in 7 patients with paroxysmal atrial fibrillation (AF) undergoing 'CLOSE'-guided PVI were studied. CF-guided RF was delivered with 35W targeting an AI of 400 at posterior and 550 at anterior wall. 336 B-EGMs and 336 U-EGMs before, during and after RF delivery were analyzed with their RF characteristics. Amplitude of the B-and U-EGM and morphology of the U-EGM were measured at each 5-second step using custom-made software.

Results

We observed a significant reduction in B-EGM amplitude (0.43 [IQR=0.25, 0.55] to 0.11 [0.07, 0.22] mV, p<0.001) and U-EGM amplitude (0.57 [0.40, 0.87] to 0.22 [0.10, 0.34] mV, p<0.001) within 5 seconds, after which no more changes were observed. Impedance drop was 18.3±1.1Ω. Loss of the unipolar terminal S-wave occurred in 59% of applications. There was no correlation between U-EGM morphology changes and RF characteristics.

Conclusion

In AI-guided RF delivery there is a significant reduction in EGM amplitude within 5 seconds. Loss of the unipolar terminal S wave occurred in 59% of applications and was not related to RF characteristics suggestive of adequate lesion formation. These findings suggest that there is a limited value in monitoring electrograms to further optimize 'CLOSE'-guided PVI.

Low Risk of Pulmonary Vein Stenosis After Contemporary Atrial Fibrillation Ablation - Lessons From Repeat Procedures After Radiofrequency Current, Cryoballoon, and Laser Balloon

BACKGROUND

The incidence of pulmonary vein stenosis (PVS) after AF ablation following contemporary procedures remains unclear. We compared the incidence of PVS/narrowing (PVS/N) after PV isolation (PVI) for (1) 3-D mapping-guided wide-area encircling irrigated radiofrequency current (RFC) ablation; (2) first-third-generation big cryoballoon (CB1-3) ablation; and (3) laser balloon (LB) ablation.

METHODS AND RESULTS

All patients undergoing a second procedure between January 2012 and November 2016 were subgrouped according to index ablation (PVI): RFC; CB; or LB. PVS/N was classified using PV diameter ratio (second/index procedure) on selective PV angiogram performed before ablation: mild, 25-49%; moderate, 50-74%; or severe, ≥75%. A total of 344 patients (1,362 PV) were analyzed (RFC, n=211; 840 PV; CB1, n=21; 82 PV; CB2,3, n=64; 250 PV; LB, n=48; 190 PV). In the LB group, 45 patients (94%) were treated with dose ≥8.5 W. Second procedures were performed on average 14.9±14.1 months after the index procedure. Mild PVS/N was observed in 18.4%, 9.5% and 3.6% of PV in the LB, RFC and CB groups, respectively (P<0.01). Moderate PVS was recognized in 2 PV (0.1%; RFC, LB). Severe PVS was never observed, and no PV intervention/surgery was required.

CONCLUSIONS

The risk for significant PVS is low after RFC/CB. The incidence of mild PVS/N was highest after standard-dose LB ablation and lowest after high-dose CB ablation.

Adenosine Testing After Atrial Fibrillation Ablation: Systematic Review and Meta-Analysis

BACKGROUND

Adenosine can be used to reveal dormant pulmonary vein (PV) conduction after pulmonary vein isolation (PVI) for the treatment of atrial fibrillation (AF). We performed a systematic review and meta-analysis to assess the impact of adenosine administration in patients undergoing PVI for AF.

METHODS

Meta-analysis of 22 studies was performed to assess the rates of freedom from AF in 1) patients with dormant PV conduction versus patients without dormant PV conduction, and 2) patients given routine adenosine post PVI versus patients not given adenosine. Relative-risks (RR) were calculated using random effects modelling.

RESULTS

In 18 studies, 3038 patients received adenosine and freedom from AF in those patients with dormant PV reconnection was significantly lower (62.9%) compared to patients without PV reconnection (67.2%) (RR 0.87; 95% CI: 0.78-0.98). In seven studies with 3049 patients, the freedom from AF was significantly higher in patients who received adenosine (67%) versus those patients who did not receive adenosine (63%) (RR: 1.11; 95% CI: 1.01-1.22).

CONCLUSIONS

The present study showed clear benefits of adenosine testing for freedom from AF recurrence. Adenosine-guided dormant conduction is associated with higher AF recurrence despite further ablation. Future studies should investigate the optimal methodology, including dosage and waiting time between PVI and adenosine administration.

Evolution of Force Sensing Technologies

In order to Improve the procedural success and long-term outcomes of catheter ablation techniques for atrial fibrillation (AF), an Important unfulfilled requirement is to create durable electrophysiologically complete lesions. Measurement of contact force (CF) between the catheter tip and the target tissue can guide physicians to optimise both mapping and ablation procedures. Contact force can affect lesion size and clinical outcomes following catheter ablation of AF. Force sensing technologies have matured since their advent several years ago, and now allow the direct measurement of CF between the catheter tip and the target myocardium in real time. In order to obtain complete durable lesions, catheter tip spatial stability and stable contact force are important. Suboptimal energy delivery, lesion density/contiguity and/or excessive wall thickness of the pulmonary vein-left atrial (PV-LA) junction may result in conduction recovery at these sites. Lesion assessment tools may help predict and localise electrical weak points resulting in conduction recovery during and after ablation. There is increasing clinical evidence to show that optimal use of CF sensing during ablation can reduce acute PV re-conduction, although prospective randomised studies are desirable to confirm long-term favourable clinical outcomes. In combination with optimised lesion assessment tools, contact force sensing technology has the potential to become the standard of care for all patients undergoing AF catheter ablation.

Adenosine-guided radiofrequency catheter ablation of atrial fibrillation: A meta-analysis of randomized control trials

BACKGROUND

The prognostic significance of adenosine-mediated dormant pulmonary vein conduction, and whether such dormant conduction should be eliminated, remains controversial. We sought to perform a meta-analysis of data from eligible studies to delineate the prognostic impact of adenosine-guided radiofrequency catheter ablation of atrial fibrillation.

METHODS

A systematic literature search was performed using online databases in order to identify relevant studies from January 2004 to September 2016. Ten studies [six observational and four randomized control trials (RCTs)] were included in the analysis.

RESULTS

Five studies (two observational and three RCTs) compared the efficacy of adenosine-mediated elimination of dormant conduction versus no adenosine test. Overall, the adenosine-guided ablation strategy displayed better long-term outcomes as compared with no adenosine testing (RR 1.08, 95% CI 1.01-1.14, p=0.02; Heterogeneity: I2=42%, p: 0.14). The meta-analysis of only RCTs failed to show any differences between the two strategies (RR 1.03, 95% CI 0.96-1.11, p=0.37; Heterogeneity: I2 0%, p: 0.41). Eight studies (five observational and three RCTs) addressed the efficacy of adenosine-induced dormant conduction and additional ablation versus no dormant conduction during adenosine challenge. Overall, a trend towards a better outcome in those without dormant conduction during drug challenge was noted (RR 0.89, 95% CI 0.77-1.03, p=0.11; Heterogeneity: I2 65% p: 0.006). The pooled analysis of RCTs failed to show any differences between the two arms (RR 0.90, 95% CI 0.62-1.30, p= 0.57; Heterogeneity: I2 88%, p: 0.0002).

CONCLUSIONS

Adenosine-guided radiofrequency catheter ablation of atrial fibrillation does not provide additional benefit in terms of freedom of arrhythmia recurrence.

High-voltage zones within the pulmonary vein antra: Major determinants of acute pulmonary vein reconnections after atrial fibrillation ablation

PURPOSE

Recurrence of atrial fibrillation (AF) after pulmonary vein isolation (PVI) is mainly due to PV reconnections. Patient-specific tissue characteristics that may contribute remain unidentified. This study aimed to assess the relationship between the bipolar electrogram voltage amplitudes recorded from the PV-left atrial (LA) junction and acute PV reconnection sites.

METHODS

Three-dimensional LA voltage maps created before an extensive encircling PVI in 47 AF patients (31 men; mean age 62 ± 11 years) were examined for an association between the EGM voltage amplitude recorded from the PV-LA junction and acute post-PVI PV reconnections (spontaneous PV reconnections and/or ATP-provoked dormant PV conduction).

RESULTS

Acute PV reconnections were observed in 17 patients (36%) and in 24 (3%) of the 748 PV segments (16 segments per patient) and were associated with relatively high bipolar voltage amplitudes (3.26 ± 0.85 vs. 1.79 ± 1.15 mV, p < 0.0001) and a relatively low mean force-time integral (FTI) (428 ± 56 vs. 473 ± 76 gs, p = 0.0039) as well as FTI/PV-LA bipolar voltage (137 [106, 166] vs. 295 [193, 498] gs/mV, p < 0.0001). An analysis of the receiver operating characteristic curves revealed a high prognostic performance of the LA bipolar voltage and FTI/PV-LA bipolar voltage for acute PV reconnections (areas under the curve: 0.86 and 0.89, respectively); the best cutoff values were >2.12 mV and ≤183 gs/mV, respectively.

CONCLUSIONS

The PV-LA voltage on the PV-encircling ablation line and FTI/PV-LA voltage were related to the acute post-PVI PV reconnections. A more durable ablation strategy is warranted for high-voltage zones.

High Voltage Guided Pulmonary Vein Isolation in Paroxysmal Atrial Fibrillation

Background

Ablation of the pulmonary vein (PV) antrum using an electroanatomic mapping system is standard of care for point-by-point pulmonary vein isolation (PVI). Focused ablation at critical areas is more likely to achieve intra-procedural PV isolation and decrease the likelihood for reconnection and recurrence of atrial fibrillation (AF). Therefore this prospective pilot study is to investigate the short-term outcome of a voltage-guided circumferential PV ablation (CPVA) strategy.

Methods

We recruited patients with a history of paroxysmal atrial fibrillation (AF). The EnSite NavX system (St. Jude Medical, St Paul, Minnesota, USA) was employed to construct a three-dimensional geometry of the left atrium (LA) and voltage map. CPVA was performed; with radiofrequency (RF) targeting sites of highest voltage first in a sequential clockwise fashion then followed by complete the gaps in circumferential ablation. Acute and short-term outcomes were compared to a control group undergoing conventional standard CPVA using the same 3D system. Follow-up was scheduled at 3, 6 and 12 months.

Results

Thirty-four paroxysmal AF patients with a mean age of 40 years were included. Fourteen patients (8 male) underwent voltage mapping and 20 patients underwent empirical, non-voltage guided standard CPVA. A mean of 54 ± 12 points per PV antrum were recorded. Mean voltage for right and left PVs antra were 1.7±0.1 mV and 1.9±0.2 mV, respectively. There was a trend towards reduced radiofrequency time (40.9±17.4 vs. 48.1±15.5 mins; p=0.22).

Conclusion

Voltage-guided CPVA is a promising strategy in targeting critical points for PV isolation with a lower trend of AF recurrence compared with a standard CPVA in short-term period. Extended studies to confirm these findings are warranted.

Adenosine‐Guided Pulmonary Vein Antral Isolation for Paroxysmal Atrial Fibrillation: A Randomized Study

Objectives

The prognostic significance of adenosine‐mediated pulmonary vein (PV) dormant conduction and whether such conduction should be eliminated still remain controversial. This randomized study aimed to investigate whether adenosine‐guided ablation of the reconnection gaps improves the long‐term outcomes of pulmonary vein antral isolation (PVAI) for paroxysmal atrial fibrillation (AF).

Methods and Results

Consecutive patients with paroxysmal AF were randomly assigned to undergo (n = 80, group 1) or not (n = 81, group 2) adenosine testing following PVAI. Adenosine‐mediated PV dormant conduction was unmasked in 26 patients (32.5%) of group 1. Successful elimination of the reconnection gaps was subsequently performed in all patients. During a mean follow‐up period of 11.39 ± 5.10 months, 30 patients of group 1 (37.5%), and 27 patients of group 2 (33.3%) experienced arrhythmia recurrence. The Kaplan–Meier arrhythmia free survival curves failed to demonstrate any significant differences between study groups (log rank 0.217, P = 0.642). Fourteen of 26 (53.8%) patients with adenosine‐mediated dormant conduction and subsequent elimination of reconnection gaps experienced AF recurrence during follow‐up. On the contrary, only 16 of 54 patients without dormant conduction (29.6%) displayed arrhythmia recurrence (P = 0.049). Logistic regression analysis showed that adenosine‐mediated PV reconnection (hazard ratio 0.292, 95% confidence interval 0.122–0.483; P = 0.01) was an independent predictor of AF recurrence.

Conclusion

In this patients’ cohort, adenosine‐mediated PV reconnection is predictive of future arrhythmic events. Elimination of dormant conduction with additional ablation lesions does not improve the long‐term outcome of the procedure compared to the standard PVAI.