Experimental maxillary sinus augmentation using a highly bioactive glass ceramic

Rapidly derived equimolar Ca: P phasic bioactive glass infused flexible gelatin multi-functional scaffolds - A promising tissue engineering

The study aims to design and fabricate an ultra-easier multi-functional biomedical polymeric scaffold loaded with unique equimolar Ca:P phasic bioactive glass material (BG). Gelatin (G) - 45S5 bioactive glass (BG) scaffolds were synthesized via a simple laboratory refrigerator with higher biocompatibility and cytocompatibility. The results proved that BG has enhanced bio-mineralization of the scaffolds and results support that the G: BG (1:2) ratio is the more appropriate composition. Brunauer-Emmett-Teller (BET) study confirms the higher surface area for pure Gelatin and G: BG (1:2). Scanning Electron Microscopic images display the precipitation of hydroxycarbonate apatite layer over the scaffolds on immersing it in simulated body fluid. Alkaline phosphate activity proved that G: BG (1:2) scaffold could induce mitogenesis in MG-63 osteoblast cells, thus helping in hard tissue regeneration. Sirius red collagen deposition showed that higher content bioactive glass incorporated Gelatin polymeric scaffold G: BG (1:2) could induce rapid collagen secretion of NIH 3T3 fibroblast cell line that could help in soft tissue regeneration and earlier wound healing. The scaffolds were also tested for cell viability using NIH 3T3 fibroblast cell lines and MG 63 osteoblastic cell lines through methyl thiazolyl tetrazolium (MTT) assay. Thus, the study shows a scaffold of appropriate composition G: BG (1:2) can be a multifunctional material to regenerate hard and soft tissues.

Ozone Improved Bone Dynamic of Female Rats Using Zoledronate

The aim of this study was to analyze the effect of ozone (OZN) therapy on the dynamics of bone tissue in ovariectomized rats treated with zoledronic acid (ZOL). Female Wistar rats aged 6 months (n = 110) were subjected to bilateral ovariectomy (OVX). At month 3 post-OVX, 10 animals were euthanized to characterize the bone tissue architecture using microtomography (micro-CT). The remaining animals were divided into two groups: ZOL group, administered with ZOL (100 μg/kg body weight); saline (SAL) group (0.45 mL of SAL solution), both for 28 days. At month 3 post-treatment, 10 animals from each group were euthanized to characterize the bone architecture using micro-CT. The remaining animals were divided into the following groups: ZOL (n = 20), ZOL + OZN (n = 20); SAL (n = 20), and SAL + OZN (n = 20). The animals in ZOL + OZN and SAL + OZN groups were intraperitoneally administered with OZN (0.7 mg/kg body weight) once every 2 days. On days 30 and 60, six animals from each group were euthanized for analysis and structural characterization of bones in the femoral head and spine. Some samples of the femoral neck were subjected to biomechanical tests, while some samples were analyzed under a laser confocal microscope. The other samples collected from the femoral neck and spine were analyzed for area of neoformed bone and used for performing inflammatory cell and osteocyte counts. Data were submitted to statistical analysis considering a significance level of p < 0.05. Bone volume percentage and osteocyte and inflammatory cell counts were upregulated in the femoral head region of the ZOL + OZN group. Biomechanical analysis of the femoral neck revealed that the modulus of elasticity was similar between the ZOL and ZOL + OZN groups but differed significantly between the SAL and SAL + OZN groups. The positive areas for calcein and alizarin in the ZOL and ZOL + OZN groups were higher than those in the SAL and SAL + OZN groups. This suggested a positive synergistic effect of OZN and ZOL on the maintenance of bone mass and restoration of bone tissue vitality in ovariectomized rats.

Inflammatory response and macrophage polarization using different physicochemical biomaterials for oral and maxillofacial reconstruction

Knowledge about the action of immune system in the recognition of biomaterials has been extremely helpful when it comes about understanding host response and biomaterials' fate in human body. This study aimed to investigate inflammatory response and macrophage polarization during bone healing process of rat's calvaria critical defects using different bone materials in order to evaluate their influence on bone repair and on the quality of the newly formed bone tissue. Eighty male albinus Wistar rats underwent surgical procedure for the confectioning of a 5-mm diameter bone defect in their right parietal bone, and divided in four groups (n = 20 each), according the biomaterial: AG - Control, particulate intramembranous autogenous bone graft, HA/TCP - particulate biphasic calcium phosphate with HA/TCP (60/40), DBB - particulate deproteinized bovine bone, VC - particulate bioactive vitroceramic. After 3, 7, 21, and 45 days, the specimens were removed and prepared for microcomputed tomography (microCT), light and polarized microscopy, immunohistochemical analysis, and histomorphometry. No significant differences were detected considering percentage of leukocytes among the groups and periods, as well as in relation to immunolabeling for inflammatory (M1) and reparative (M2) macrophages. However, immunolabeling for bone marker indicated a delayed osteoblast differentiation in VC group, resulting in a decrease in mineralized bone matrix parameters in this group, revealed by microCT. In addition, AG and HA/TCP presented a satisfactory bone collagenous content. Despite the distinct origins and physicochemical properties of the tested biomaterials, they presented similar immune-inflammatory responses in the present experimental model, influencing bone-related proteins and bone quality, which must be considered according to their use.

Medication-related osteonecrosis of the jaws after tooth extraction in senescent female mice treated with zoledronic acid: Microtomographic, histological and immunohistochemical characterization

Treatment with cumulative dosages of zoledronic acid (ZA) in elderly patients is a risk factor for the development of medication-related osteonecrosis of the jaws (MRONJ), mainly related to surgical triggers such as tooth extraction. However, animal models for the investigation and understanding of MRONJ pathophysiology in senescent and postmenopausal stages remains to be developed and characterized. The aim of this study was to analyze MRONJ development in senescent female mice treated with cumulative dosages of ZA. For this purpose, twenty 129/Sv female mice, 64 weeks old, were treated with 0.9% saline solution as control group (n = 10), and with ZA at 250μg/Kg (n = 10), once a week, starting 4 weeks before the upper right incisor extraction and until the end of the experimental time points (7 days and 21 days). At 7 and 21 days post-surgery, specimens were harvested for microCT, histological, birefringence and immunohistochemical analysis. Clinically, an incomplete epithelialization was observed in ZA group at 7 days and a delayed bone matrix mineralization and collagen maturation at 7 and 21 days compared to the controls. Controls revealed sockets filled with mature bone at 21 days as observed by microCT and birefringence, while ZA group presented delayed bone deposition at 7 and 21 days, as well increased leukocyte infiltration and blood clot at 7 days, and increased bone sequestrum and empty osteocyte lacunae at 21 days (p<0.05). Also, ZA group presented decreased quantity of TGFb+ and Runx-2+ cells at 7 days, and decreased quantity of TRAP+ osteoclasts compared to the control at 21 days (p<0.05). Altogether, these data demonstrate the usefulness of this model to understanding the pathophysiology of MRONJ.

Simultaneously Improved Flame Retardance and Ceramifiable Properties of Polymer-Based Composites via the Formed Crystalline Phase at High Temperature

Ceramifiable polyolefin materials have an excellent application prospect in high-temperature-resistant wires and cables because of their excellent fire safety performance via a ceramization process under fire conditions. During the ceramization process, the control of the crystalline phase plays a vital role in determining the final fire resistance and ceramifiable properties. In this work, ammonium polyphosphate/zinc borate (APP/ZB) was developed to achieve the highly efficient flame retardance and ceramization of the ethylene-vinyl acetate/mica powder/organo-modified montmorillonite (EVA/MP/OMMT) composite. In the combustion test, the EVA/MP/OMMT/APP/ZB system displayed obvious flame retardance feature, showing much lower total heat release and total smoke production than neat EVA. After treating at high temperatures, rigid ceramic products were formed for EVA/MP/OMMT/APP/ZB. The ceramic that was formed at 900 °C had a flexural strength of 10.3 MPa for EVA/MP/OMMT/APP/ZB containing 23 wt % of APP/ZB (9.9:13.1), increased by 2475.0, 635.7, and 586.7% compared to the corresponding values of EVA/MP/OMMT, EVA/MP/OMMT/ZB, and EVA/MP/OMMT/APP. For the latter two systems, the content of ZB or APP was 23 wt %. APP/ZB showed a remarkable fluxing effect on the ceramization of the MP-based EVA composite. The fluxing mechanism of APP/ZB was revealed by different measurements. Both APP and ZB led to the formation of a glass melt containing α-Zn₃(PO₄)₂ and orthophosphate by increasing the temperature. Successively, the melt crystalline structure cohered the OMMT and MP together, accompanied by the gradual disappearance of the mica phase and the generation of eutectic phenomenon. Finally, a ceramic with high flexural strength was formed, leading to the improved flame retardance and ceramifiable properties of EVA-based composites.

Distinct healing pattern of maxillary sinus augmentation using the vitroceramic Biosilicate®: Study in rabbits

OBJECTIVES

To follow healing process of augmented maxillary sinus in rabbits analyzing the histological pattern of bone tissue formation, along with the osteogenic activity and vascularization using a bioactive vitroceramic in comparison to deproteinized bovine bone associated or not with autogenous bone graft.

DESIGN

Forty five male adult New Zealand rabbits, 5 months of age, mean weight of 4 Kg, underwent bilateral sinus augmentation surgeries to be divided in five groups: G - (Control) particulate autogenous bone graft (AG), BO - deproteinized bovine bone, BO+G - deproteinized bovine bone + AG, BSi -vitroceramic, and BSi + G - vitroceramic +AG. After 15, 45 and 90 days, all animals were euthanized for specimen's removal to be analyzed under light microscopy, histomorphometry, and immunohistochemistry for Runx2 and VEGF labeling.

RESULTS

G, BO and BO+G groups healed uneventfully, allowing the formation of mature remodeling bone at day 90, regarding the association of AG with the biomaterial. On the other hand, BSi and BSi + G groups showed an important cellular reaction and granulation/fibrous tissue formation from the first to the last period of observation. Runx-2 and VEGF immunolabeling were coherent with this result. However, histomorphometry did not reveal significant differences considering new bone formation.

CONCLUSIONS

Reconstructed maxillary sinuses using Biosilicate® permitted satisfactory new bone formation in comparison to the deproteinized bovine bone and AG. However, the presence of granulation/fibrous tissue and inflammatory cells associated to the degrading biomaterial indicate that further studies should be careful performed considering the immunological aspect of this new biomaterial.

Bioactive glass added to autogenous bone graft in maxillary sinus augmentation: a prospective histomorphometric, immunohistochemical, and bone graft resorption assessment

Objective

The aim of this study was to compare the bone resorption rate, histomorphometry and immunohistochemical findings of bioactive glass (Biogran; Biomet, Warsaw, IN, USA) mixed with autogenous bone grafts (1:1) and autogenous bone graft isolate in maxillary sinus elevation surgery.

Material and Methods

A total of 9 maxillary sinuses were grafted with Biogran with autogenous bone graft (group 1) and 12 were mixed with autogenous bone graft (group 2). Postoperative cone beam computed tomography (CBCT) was used to measure the initial graft volume after 15 days (T1), and 6 months later, another CBCT scan was performed to evaluate the final graft volume (T2) and determine the graft resorption rate. The resorption outcomes were 37.9%±18.9% in group 1 and 45.7%±18.5% in group 2 (P=0.82). After 6 months, biopsies were obtained concurrent with the placement of dental implants; these implants were subjected to histomorphometric analysis and immunohistochemical analysis for tartrate-resistant acid phosphatase (TRAP).

Results

The average bone formation in group 1 was 36.6%±12.9 in the pristine bone region, 33.2%±13.3 in the intermediate region, and 45.8%±13.8 in the apical region; in group 2, the values were 34.4%±14.4, 35.0%±13.9, and 42.0%±16.6 of new bone formation in the pristine bone, intermediate, and apical regions, respectively. Immunostaining for TRAP showed poor clastic activity in both groups, which can indicate that those were in the remodeling phase.

Conclusions

The similarity between the groups in the formation and maintenance of the graft volume after 6 months suggests that the bioactive glass mixed with autogenous bone (1:1) can be used safely as a bone substitute for the maxillary sinus lift.

Bioactive glass-ceramic bone repair associated or not with autogenous bone: a study of organic bone matrix organization in a rabbit critical-sized calvarial model

OBJECTIVE

The aim of the study was to analyze bone matrix (BMX) organization after bone grafting and repair using a new bioactive glass-ceramic (Biosilicate^®) associated or not with particulate autogenous bone graft.

MATERIAL AND METHODS

Thirty rabbits underwent surgical bilateral parietal defects and divided into groups according to the materials used: (C) control-blood clot, (BG) particulate autogenous bone, (BS) bioactive glass-ceramic, and BG + BS. After 7, 14, and 30 days post-surgery, a fragment of each specimen was fixed in - 80 °C liquid nitrogen for zymographic evaluation, while the remaining was fixed in 10% formalin for histological birefringence analysis.

RESULTS

The results of this study demonstrated that matrix organization in experimental groups was significantly improved compared to C considering collagenous organization. Zymographic analysis revealed pro-MMP-2, pro-MMP-9, and active (a)-MMP-2 in all groups, showing gradual decrease of total gelatinolytic activity during the periods. At day 7, BG presented more prominent gelatinolytic activity for pro-MMP-2 and 9 and a-MMP-2, when compared to the other groups. In addition, at day 7, a 53% activation ratio (active form/[active form + latent form]) was evident in C group, 33% in BS group, and 31% in BG group.

CONCLUSION

In general, BS allowed the production of a BMX similar to BG, with organized collagen deposition and MMP-2 and MMP-9 disponibility, permitting satisfactory bone remodeling at the late period.

CLINICAL RELEVANCE

The evaluation of new bone substitute, with favorable biological properties, opens the possibility for its use as a viable and efficient alternative to autologous bone graft.

Comparison between mineralized cancellous bone allograft and an alloplast material for sinus augmentation: A split mouth histomorphometric study

BACKGROUND

Several grafting materials have been used in sinus augmentation procedures including autogenous bone, demineralized freeze-dried bone, hydroxyapatite, β-tricalcium phosphate, anorganic deproteinized bovine bone, and combination of these and others. Yet, the issue of the optimal graft material for sinus floor augmentation is controversial.

PURPOSE

This prospective, randomized split-mouth study was undertaken to histomorphometrically compare a biphasic calcium phosphate (BCP) alloplastic bone substitute and a human bone mineral allograft (freeze-dried bone allograft, FDBA) in patients undergoing bilateral maxillary lateral sinus floor augmentation.

MATERIAL AND METHODS

Apico-coronal core biopsies were harvested at 9 months from 26 bilateral sites in 13 treated patients. Specimens were processed for histological and histomorphometrical analyses.

RESULTS

Newly formed bone (NB) was evident in all specimens with values of 27.5% and 24.0% at the FDBA and BCP sites, respectively (P = .331). The residual graft particle values were 12.5% and 25.4% (P = .001), and the connective tissue values were 60.0% and 50.6%, respectively. The osteoconductive value was 52.6% for the FDBA and 26.7% for the alloplast (P = .001). The values for the measured residual graft particles, connective tissue, and osteoconductivity, but not for NB, showed highly significant differences between the two groups. All sections in the alloplast material showed evidence of a light chronic inflammatory infiltrate, mainly comprising lymphocytes and multinucleated giant cells.

CONCLUSIONS

Both graft materials are suitable for sinus floor augmentation, with the allograft material being more osteoconductive.

Volumetric changes of grafted volumes and the Schneiderian membrane after transcrestal and lateral sinus floor elevation procedures: A clinical, pilot study

AIM

To investigate the influence of various surgical techniques for sinus augmentation on the volumetric changes of graft, membrane and the post-operative discomfort.

MATERIALS AND METHODS

Eighteen patients in need of bilateral sinus floor elevation (SFE) were assigned to lateral SFE, transcrestal SFE and intralift procedures. CBCT images taken at baseline, 1 week and 6 weeks were analysed for volumetric changes in graft and Schneiderian membrane. Questionnaires were used to analyse post-op discomfort.

RESULTS

The overall average graft volume obtained after 1 week was 1.87 cm³ (range 0.12-4.72 cm³ ). Volumes decreased after 6 weeks to an overall mean volume of 1.33 cm³ (range 0.10-4.29 cm³ - average decrease of 27.6%). After 6 weeks, the amount of graft volume decreased in every treatment option, ranging from -23.13% for the tSFE, over -24.55% for the lSFE, to -33.71% for the IL. Although all treatment options correspond in an increase in Schneiderian membrane volume, no statistically significant correlation between this increase and loss of graft volume could be obtained for all treatments (p = 0.97).

CONCLUSION

All SFE techniques provided sufficient graft volume for implant treatment. All techniques provoke a partially transient swelling of the Schneiderian membrane. All techniques resulted in a decrease in graft volume after 6 weeks; however, no significant differences were obtained between treatments. Furthermore, no statistical significant correlation between the post-operative swelling of the Schneiderian membrane and reduction in graft volume at 6 weeks could be obtained.

An osteogenesis/angiogenesis-stimulation artificial ligament for anterior cruciate ligament reconstruction

To solve the poor healing of polyethylene terephthalate (PET) artificial ligament in bone tunnel, copper-containing bioactive glass (Cu-BG) nanocoatings on PET artificial ligaments were successfully prepared by pulsed laser deposition (PLD). It was hypothesized that Cu-BG coated PET (Cu-BG/PET) grafts could enhance the in vitro osteogenic and angiogenic differentiation of rat bone marrow mesenchymal stem cells (rBMSCs) and in vivo graft-bone healing after anterior cruciate ligament (ACL) reconstruction in a goat model. Scanning electron microscope and EDS mapping analysis revealed that the prepared nanocoatings had uniform element distribution (Cu, Ca, Si and P) and nanostructure. The surface hydrophilicity of PET grafts was significantly improved after depositing Cu-BG nanocoatings. The in vitro study displayed that the Cu-BG/PET grafts supported the attachment and proliferation of rBMSCs, and significantly promoted the expression of HIF-1α gene, which up-regulated the osteogenesis-related genes (S100A10, BMP2, OCN) and angiogenesis-related genes (VEGF) in comparison with PET or BG coated PET (BG/PET) grafts which do not contain Cu element. Meanwhile, Cu-BG/PET grafts promoted the bone regeneration at the graft-host bone interface and decreased graft-bone interface width, thus enhancing the bonding strength as well as angiogenesis (as indicated by CD31 expression) in the goat model as compared with BG/PET and pure PET grafts. The study demonstrates that the Cu-containing biomaterials significantly promote osteogenesis and angiogenesis in the repair of bone defects of large animals and thus offering a promising method for ACL reconstruction by using Cu-containing nanobioglass modified PET grafts.

STATEMENT OF SIGNIFICANCE

It remains a significant challenge to develop an artificial graft with distinct osteogenetic/angiogenetic activity to enhance graft-bone healing for ligament reconstruction. To solve these problems, copper-containing bioactive glass (Cu-BG) nanocoatings on PET artificial ligaments were successfully prepared by pulsed laser deposition (PLD). It was found that the prepared Cu-BG/PET grafts significantly stimulated the proliferation and osteogenic/angiogenic differentiation of bone marrow stromal cells (BMSCs) through activating HIF-1α/S100A10/Ca²⁺ signal pathway. The most important is that the in vivo bone-forming ability of Cu-containing biomaterials was, for the first time, elucidated in a large animal model, revealing the enhanced capacity of osteogenesis and angiogenesis with incorporation of bioactive Cu element. It is suggested that the copper-containing biomaterials significantly promote osteogenesis and angiogenesis in large animal defects and thus offering a promising method for ACL reconstruction by using Cu-containing nanobioglass modification of PET grafts, paving the way to apply Cu-containing biomaterials for tissue engineering and regenerative medicine.