Vasculogenic potential evaluation of bottom-up, PCL scaffolds guiding early angiogenesis in tissue regeneration

Microsphere-Enabled Modular Formation of Miniaturized In Vitro Breast Cancer Models

In search of effective therapeutics for breast cancers, establishing physiologically relevant in vitro models is of great benefit to facilitate the clinical translation. Despite extensive progresses, it remains to develop the tumor models maximally recapturing the key pathophysiological attributes of their native counterparts. Therefore, the current study aimed to develop a microsphere-enabled modular approach toward the formation of in vitro breast tumor models with the capability of incorporating various selected cells while retaining spatial organization. Poly (lactic-co-glycolic acid) microspheres (150-200 mm) with tailorable pore size and surface topography are fabricated and used as carriers to respectively lade with breast tumor-associated cells. Culture of cell-laden microspheres assembled within a customized microfluidic chamber allowed to form 3D tumor models with spatially controlled cell distribution. The introduction of endothelial cell-laden microspheres into cancer-cell laden microspheres at different ratios would induce angiogenesis within the culture to yield vascularized tumor. Evaluation of anticancer drugs such as doxorubicin and Cediranib on the tumor models do demonstrate corresponding physiological responses. Clearly, with the ability to modulate microsphere morphology, cell composition and spatial distribution, microsphere-enabled 3D tumor tissue formation offers a high flexibility to satisfy the needs for pathophysiological study, anticancer drug screening or design of personalized treatment.

Review on Bioinspired Design of ECM-Mimicking Scaffolds by Computer-Aided Assembly of Cell-Free and Cell Laden Micro-Modules

Tissue engineering needs bioactive drug delivery scaffolds capable of guiding cell biosynthesis and tissue morphogenesis in three dimensions. Several strategies have been developed to design and fabricate ECM-mimicking scaffolds suitable for directing in vitro cell/scaffold interaction, and controlling tissue morphogenesis in vivo. Among these strategies, emerging computer aided design and manufacturing processes, such as modular tissue unit patterning, promise to provide unprecedented control over the generation of biologically and biomechanically competent tissue analogues. This review discusses recent studies and highlights the role of scaffold microstructural properties and their drug release capability in cell fate control and tissue morphogenesis. Furthermore, the work highlights recent advances in the bottom-up fabrication of porous scaffolds and hybrid constructs through the computer-aided assembly of cell-free and/or cell-laden micro-modules. The advantages, current limitations, and future challenges of these strategies are described and discussed.

Computer-aided patterning of PCL microspheres to build modular scaffolds featuring improved strength and neovascularized tissue integration

In the past decade, modular scaffolds prepared by assembling biocompatible and biodegradable building blocks (e.g. microspheres) have found promising applications in tissue engineering (TE) towards the repair/regeneration of damaged and impaired tissues. Nevertheless, to date this approach has failed to be transferred to the clinic due to technological limitations regarding microspheres patterning, a crucial issue for the control of scaffold strength, vascularization and integration in vivo. In this work, we propose a robust and reliable approach to address this issue through the fabrication of polycaprolactone (PCL) microsphere-based scaffolds with in-silico designed microarchitectures and high compression moduli. The scaffold fabrication technique consists of four main steps, starting with the manufacture of uniform PCL microspheres by fluidic emulsion technique. In the second step, patterned polydimethylsiloxane (PDMS) moulds were prepared by soft lithography. Then, layers of 500 µm PCL microspheres with geometrically inspired patterns were obtained by casting the microspheres onto PDMS moulds followed by their thermal sintering. Finally, three-dimensional porous scaffolds were built by the alignment, stacking and sintering of multiple (up to six) layers. The so prepared scaffolds showed excellent morphological and microstructural fidelity with respect to the in-silico models, and mechanical compression properties suitable for load bearing TE applications. Designed porosity and pore size features enabled in vitro human endothelial cells adhesion and growth as well as tissue integration and blood vessels invasion in vivo. Our results highlighted the strong impact of spatial patterning of microspheres on modular scaffolds response, and pay the way about the possibility to fabricate in silico-designed structures featuring biomimetic composition and architectures for specific TE purposes.

Microcomputed Tomography-Based Analysis of Neovascularization within Bioengineered Vascularized Tissues

In the field of tissue engineering, evaluating newly formed vascular networks is considered a fundamental step in deciphering the processes underlying tissue development. Several common modalities exist to study vessel network formation and function. However, a proper methodology that allows through three-dimensional visualization of neovessels in a reproducible manner is required. Here, we describe in-depth exploration, visualization, and analysis of vessels within newly formed tissues by utilizing a contrast agent perfusion protocol and high-resolution microcomputed tomography. Bioengineered constructs consisting of porous, biocompatible, and biodegradable scaffolds are loaded with cocultures of adipose-derived microvascular endothelial cells (HAMECs) and dental pulp stem cells (DPSCs) and implanted in a rat femoral bundle model. After 14 days of in vivo maturation, we performed the optimized perfusion protocol to allow host penetrating vascular visualization and assessment within neotissues. Following high-resolution microCT scanning of DPSC:HAMEC explants, we performed the volumetric and spatial analysis of neovasculature. Eventually, the process was repeated with a previously published coculture system for prevascularization based on adipose-derived mesenchymal stromal cells (MSCs) and HAMECs. Overall, our approach allows a comprehensive understanding of vessel organization during engraftment and development of neotissues.

miR-328a-3p stimulates endothelial cell migration and tubulogenesis

Endothelial cells have important biological roles after peripheral nerve injury by forming blood vessels within the nerve gap and guiding Schwann cell migration. MicroRNAs (miRNAs/miRs) affect cellular behavior and regulate a wide variety of physiological and pathological activities, including peripheral nerve regeneration. Emerging studies have identified the essential roles of miRNAs in the phenotype modulation of Schwann cells, while the effects of miRNAs on endothelial cells have remained to be thoroughly investigated. miR-328a-3p was differentially expressed in peripheral nerve stumps after nerve injury. In the present study, the effects of miR-328a-3p on biological functions of endothelial cells were determined by transfecting cultured human umbilical vein endothelial cells (HUVECs) with miR-328a-3p mimics or inhibitor. Transfection with miR-328a-3p mimics led to slightly decreased HUVEC proliferation and robustly increased HUVEC migration and tubulogenesis, while transfection with miR-328a-3p inhibitor led to opposite results. Using bioinformatics analysis, potential regulators and effectors of miR-328a-3p were further discovered and a miR-328a-3p-centered competing endogenous RNA network was constructed. Collectively, the present study demonstrated that dysregulated miR-328a-3p after peripheral nerve injury may affect the migration and angiogenesis of endothelial cells and contribute to peripheral nerve regeneration.

A combined morphometric approach to feature mouse kidney vasculature

Physiological kidney function is closely related to the state of the vascular network. Disorders, such as capillary rarefaction, predispose to chronic kidney disease (CKD). In this context, deepening of the methodologies for studying the renal vascular network can be of basic importance. To meet this need, numerous animal models and, in parallel, several methods have been developed. In this work we propose a protocol to accurately feature kidney vasculature in mouse, however, the same protocol is suitable to be applied also to other animal models. The approach is multiparametric and mainly based on micro-computed tomography (μCT) technique. Micro-ct allows to study in detail the vascular network of any organ by exploiting the possibility to perfuse the sample with a contrast agent. The proposed protocol provides a fast and reliable method to extract quantitative information from the μCT scan by using only the basic functions of the software supplied by the scanner without any additional analysis. Through iterative cropping of the scanned ROI and calculation of a sample-specific threshold we calculated that the average volume of a female BALB/c kidney of eighth weeks is 147.8 mm³ (5.4%). We also pointed out that the average volume of the vascular network is 4.9% (0.3%). In parallel we performed traditional histological and immunofluorescence techniques to integrate the information gained via μCT and to frame them in the tissue context. Vessel count on histological sections showed a different density in the different regions of the organ parenchyma, in detail, vessel density in the cortex was 19.03 ± 2.51 vessels/ROI while in the medulla it was 10.6 ± 1.7 vessels/ROI and 5.4 ± 1.3 vessels/ROI in the outer and inner medulla, respectively. We then studied vessel distribution in the renal parenchyma which showed that the 55% of vascular component is included in the cortex, the 30% in the outer medulla and the 15% in the inner medulla. Collectively, we propose an integrated approach that can be particularly useful in the preclinical setting to characterize the vasculature of any organ accurately and rapidly.

Development and Angiogenic Potential of Cell-Derived Microtissues Using Microcarrier-Template

Tissue engineering and regenerative medicine approaches use biomaterials in combination with cells to regenerate lost functions of tissues and organs to prevent organ transplantation. However, most of the current strategies fail in mimicking the tissue's extracellular matrix properties. In order to mimic native tissue conditions, we developed cell-derived matrix (CDM) microtissues (MT). Our methodology uses poly-lactic acid (PLA) and Cultispher® S microcarriers' (MCs') as scaffold templates, which are seeded with rat bone marrow mesenchymal stem cells (rBM-MSCs). The scaffold template allows cells to generate an extracellular matrix, which is then extracted for downstream use. The newly formed CDM provides cells with a complex physical (MT architecture) and biochemical (deposited ECM proteins) environment, also showing spontaneous angiogenic potential. Our results suggest that MTs generated from the combination of these two MCs (mixed MTs) are excellent candidates for tissue vascularization. Overall, this study provides a methodology for in-house fabrication of microtissues with angiogenic potential for downstream use in various tissue regenerative strategies.

Modular Strategies to Build Cell-Free and Cell-Laden Scaffolds towards Bioengineered Tissues and Organs

Engineering three-dimensional (3D) scaffolds for functional tissue and organ regeneration is a major challenge of the tissue engineering (TE) community. Great progress has been made in developing scaffolds to support cells in 3D, and to date, several implantable scaffolds are available for treating damaged and dysfunctional tissues, such as bone, osteochondral, cardiac and nerve. However, recapitulating the complex extracellular matrix (ECM) functions of native tissues is far from being achieved in synthetic scaffolds. Modular TE is an intriguing approach that aims to design and fabricate ECM-mimicking scaffolds by the bottom-up assembly of building blocks with specific composition, morphology and structural properties. This review provides an overview of the main strategies to build synthetic TE scaffolds through bioactive modules assembly and classifies them into two distinct schemes based on microparticles (µPs) or patterned layers. The µPs-based processes section starts describing novel techniques for creating polymeric µPs with desired composition, morphology, size and shape. Later, the discussion focuses on µPs-based scaffolds design principles and processes. In particular, starting from random µPs assembly, we will move to advanced µPs structuring processes, focusing our attention on technological and engineering aspects related to cell-free and cell-laden strategies. The second part of this review article illustrates layer-by-layer modular scaffolds fabrication based on discontinuous, where layers' fabrication and assembly are split, and continuous processes.

Induced Pluripotent Stem Cells as Vasculature Forming Entities

Tissue engineering (TE) pursues the ambitious goal to heal damaged tissues. One of the most successful TE approaches relies on the use of scaffolds specifically designed and fabricated to promote tissue growth. During regeneration the guidance of biological events may be essential to sustain vasculature neoformation inside the engineered scaffold. In this context, one of the most effective strategies includes the incorporation of vasculature forming cells, namely endothelial cells (EC), into engineered constructs. However, the most common EC sources currently available, intended as primary cells, are affected by several limitations that make them inappropriate to personalized medicine. Human induced Pluripotent Stem Cells (hiPSC), since the time of their discovery, represent an unprecedented opportunity for regenerative medicine applications. Unfortunately, human induced Pluripotent Stem Cells-Endothelial Cells (hiPSC-ECs) still display significant safety issues. In this work, we reviewed the most effective protocols to induce pluripotency, to generate cells displaying the endothelial phenotype and to perform an efficient and safe cell selection. We also provide noteworthy examples of both in vitro and in vivo applications of hiPSC-ECs in order to highlight their ability to form functional blood vessels. In conclusion, we propose hiPSC-ECs as the preferred source of endothelial cells currently available in the field of personalized regenerative medicine.

The synergistic effects of graphene-contained 3D-printed calcium silicate/poly-ε-caprolactone scaffolds promote FGFR-induced osteogenic/angiogenic differentiation of mesenchymal stem cells

Graphene-contained calcium silicate (CS)/polycaprolactone (PCL) scaffold (GCP) provides an alternative solution that can bring several bone formation properties, such as osteoinductive. This study finds out the optimal percentage of graphene additive to calcium silicate and polycaprolactone mixture for excellent in vitro and in vivo bone-regeneration ability, in addition, this scaffold could fabricate by 3D printing technology and demonstrates distinct mechanical, degradation, and biological behavior. With controlled structure and porosity by 3D printing, osteogenesis and proliferation capabilities of Wharton's Jelly derived mesenchymal stem cells (WJMSCs) were significantly enhanced when cultured on 3D printed GCP scaffolds. In this study, it was also discovered that fibroblast growth factor receptor (FGFR) plays an active role in modulating differentiation behavior of WJMSCs cultured on GCP scaffolds. The validation has been proved by analyzed the decreased cell proliferation, osteogenic-related protein (ALP and OC), and angiogenic-related protein (VEGF and vWF) with FGFR knockdown on all experimental groups. Moreover, this study infers that the GCP scaffold could induce the effects of proliferation, differentiation and related protein expression on WJMSCs through FGFR pathway. In summary, this research indicated the 3D-printed GCP scaffolds own the dual bioactivities to reach the osteogenesis and vascularization for bone regeneration.

MicroRNAs delivery into human cells grown on 3D-printed PLA scaffolds coated with a novel fluorescent PAMAM dendrimer for biomedical applications

Many advanced synthetic, natural, degradable or non-degradable materials have been employed to create scaffolds for cell culture for biomedical or tissue engineering applications. One of the most versatile material is poly-lactide (PLA), commonly used as 3D printing filament. Manufacturing of multifunctional scaffolds with improved cell growth proliferation and able to deliver oligonucleotides represents an innovative strategy for controlled and localized gene modulation that hold great promise and could increase the number of applications in biomedicine. Here we report for the first time the synthesis of a novel Rhodamine derivative of a poly-amidoamine dendrimer (G = 5) able to transfect cells and to be monitored by confocal microscopy that we also employed to coat a 3D-printed PLA scaffold. The coating do not modify the oligonucleotide binding ability, toxicity or transfection properties of the scaffold that is able to increase cell proliferation and deliver miRNA mimics (i.e., pre-mir-503) into human cells. Although further experiments are required to optimize the dendrimer/miRNA ratio and improve transfection efficiency, we demonstrated the effectiveness of this promising and innovative 3D-printed transfection system to transfer miRNAs into human cells for future biomedical applications.

Vascular Cell Co-Culture on Silk Fibroin Matrix

Silk fibroin (SF), a natural polymer material possessing excellent biocompatibility and biodegradability, and has been widely used in biomedical applications. In order to explore the behavior of vascular cells by co-culturing on regenerated SF matrix for use as artificial blood vessels, human aorta vascular smooth muscle cells (HAVSMCs) were co-cultured with human arterial fibroblasts (HAFs) or human umbilical vein endothelial cells (HUVECs) on SF films and SF tubular scaffolds (SFTSs). Analysis of cell morphology and deoxyribonucleic acid (DNA) content showed that HUVECs, HAVSMCs and HAFs adhered and spread well, and exhibited high proliferative activity whether cultured alone or in co-culture. Immunofluorescence and scanning electron microscopy (SEM) analysis showed that HUVECs and HAFs co-existed well with HAVSMCs on SF films or SFTSs. Cytokine expression determined by reverse transcription-polymerase chain reaction (RT-PCR) indicated that the expression levels of α-smooth muscle actin (α-SMA) and smooth muscle myosin heavy chain (SM-MHC) in HAVSMCs were inhibited on SF films or SFTSs, but expression could be obviously promoted by co-culture with HUVECs or HAFs, especially that of SM-MHC. On SF films, the expression of vascular endothelial growth factor (VEGF) and platelet endothelial cell adhesion molecule-1 (CD31) in HUVECs was promoted, and the expression levels of both increased obviously when co-cultured with HAVSMCs, with the expression levels of VEGF increasing with increasing incubation time. The expression levels of VEGF and CD31 in cells co-cultured on SFTSs improved significantly from day 3 compared with the mono-culture group. These results were beneficial to the mechanism analysis on vascular cell colonization and vascular tissue repair after in vivo transplantation of SFTSs.

Azopolymer photopatterning for directional control of angiogenesis

Understanding cellular behavior in response to microenvironmental stimuli is central to tissue engineering. An increasing number of reports emphasize the high sensitivity of cells to the physical characteristics of the surrounding milieu and in particular, topographical cues. In this work, we investigated the influence of dynamic topographic signal presentation on sprout formation and the possibility to obtain a space-time control over sprouting directionality without growth factors, in order to investigate the contribution of just topography in the angiogenic process. To test our hypothesis, we employed a 3D angiogenesis assay based on the use of spheroids derived from human umbilical vein endothelial cells (HUVECs). We then modulated the in situ presentation of topographical cues during early-stage angiogenesis through real-time photopatterning of an azobenzene-containing polymer, poly (Disperse Red 1 methacrylate) (pDR1m). Pattern inscription on the polymer surface was made using the focused laser of a confocal microscope. We demonstrate that during early-stage angiogenesis, sprouts followed the pattern direction, while spheroid cores acquired a polarized shape. These findings confirmed that sprout directionality was influenced by the photo-inscribed pattern, probably through contact guidance of leader cells, thus validating the proposed platform as a valuable tool for understanding complex processes involved in cell-topography interactions in multicellular systems.

STATEMENT OF SIGNIFICANCE

The complex relationship between endothelial cells and the surrounding environment that leads to formation of a newly formed vascular network during tissue repair is currently unknown. We have developed an innovative in vitro platform to study these mechanisms in a space and time controlled fashion simulating what happens during regeneration. In particular, we combine a "smart" surface, namely a polymer film, with a three-dimensional living cell aggregate. The polymer is activated by light through which we can design a path to guide cells toward the formation of a new vessel. Our work lies at the intersection of stimuli-responsive biointerfaces and cell biology and may be particularly inspiring for those interested in designing biomaterial surface related to angiogenesis.

Fabrication of β-tricalcium phosphate composite ceramic sphere-based scaffolds with hierarchical pore structure for bone regeneration

Polymer sphere-based scaffolds, which are prepared by bonding the adjacent spheres via sintering the randomly packed spheres, feature uniform pore structure, full three-dimensional (3D) interconnection, and considerable mechanical strength. However, bioceramic sphere-based scaffolds fabricated by this method have never been reported. Due to high melting temperature of bioceramic, only limited diffusion rate can be achieved when sintering the bioceramic spheres, which is far from enough to form robust bonding between spheres. In the present study, for the first time we fabricated 3D interconnected β-tricalcium phosphate ceramic sphere-based (PG/TCP) scaffolds by introducing phosphate-based glass (PG) as sintering additive and placing uniaxial pressure during the sintering process. The sintering mechanism of PG/TCP scaffolds was unveiled. The PG/TCP scaffolds had hierarchical pore structure, which was composed by interconnected macropores (>200 μm) among spheres, pores (20–120 μm) in the interior of spheres, and micropores (1–3 μm) among the grains. During the sintering process, partial PG reacted with β-TCP, forming β-Ca2P2O7; metal ions from PG substituted to Ca2+ sites of β-TCP. The mechanical properties (compressive strength 2.8–10.6 MPa; compressive modulus 190–620 MPa) and porosity (30%–50%) of scaffolds could be tailored by manipulating the sintering temperatures. The introduction of PG accelerated in vitro degradation of scaffolds, and the PG/TCP scaffolds showed good cytocompatibility. This work may offer a new strategy to prepare bioceramic scaffolds with satisfactory physicochemical properties for application in bone regeneration.