Comparison of osteoconductivity and absorbability of beta-tricalcium phosphate and hydroxyapatite in clinical scenario of opening wedge high tibial osteotomy

Radiographic Assessment of Bone Union in Proximal Tibia and Distal Femur Osteotomies: A Systematic Review

Background

Osteotomies around the knee are a well-established treatment option for early and moderate unicompartmental osteoarthritis combined with a lower extremity malalignment. Moreover, osteotomies are often combined with cartilage treatment. Current image-based bone union assessments lack an accepted definition despite widespread use in research and clinical settings. The aim of this systematic review was to identify definitions and classification systems for bone union on radiographs after a proximal tibia or distal femur osteotomy.

Methods

Following the Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines, we systematically searched MEDLINE and Embase database, applying specific inclusion and exclusion criteria. Two independent reviewers screened abstracts and full-texts. The modified Cochrane Risk of Bias Tool and Risk of Bias in Nonrandomized Studies of Interventions tool were used. Data extraction included study characteristics, imaging modality, bone union definition, classification systems, assessment of gap fillers, use of modifiers, and osteotomy type.

Results

Of the 1,180 screened titles and abstracts, 105 studies were included, with the majority (69 studies [65.7%]) using a retrospective design. Fifty-five studies (52.4%) defined bone union based on one or more criteria, while 50 studies (47.6%) used a classification system. There were 13 different criteria for bone union and 9 different classification systems. Interestingly, none of the classification systems incorporated negative criteria, such as hardware failure. Notably, 137 studies (49.1%) described bone union as either a primary or secondary outcome but do not describe a system for assessing bone union.

Conclusion

This systematic review highlights the lack of consensus in the literature in defining bone union after a proximal tibia or distal femur osteotomy, revealing many criteria and different classifications. None of the classification systems were applicable to osteotomies with and without gap filler. This systematic review shows the need for a straightforward, reproducible, and accurate method to assess bone union after a proximal tibia or distal femur osteotomy.

Level of Evidence

Level III. See Instructions for Authors for a complete description of levels of evidence.

Bilateral Knee Osteoarthritis Treated With Medial Open-Wedge High Tibial Osteotomy Using Two Types of β-Tricalcium Phosphate With Differing Placements in Each Knee: A Report of Two Cases

In medial open-wedge high tibial osteotomy (MOWHTO) for knee osteoarthritis, synthetic bone is commonly used as a replacement material for the opening gap. Unidirectional porous β-tricalcium phosphate (UDPTCP) and spherical porous β-tricalcium phosphate (SPTCP) have been widely used in this regard. In general, the two prostheses are placed parallel to the osteotomy opening gap. In this report, we discuss two cases involving a 63-year-old woman and a 51-year-old man who underwent MOWHTO for bilateral knee osteoarthritis. Both patients had experienced bilateral knee pain. In both patients, UDPTCP was placed anteriorly and SPTCP was placed posteriorly in one knee, with the placement reversed in the other knee. The remodeling of each type of β-TCP was evaluated using CT immediately after the surgery and one year postoperatively. The postoperative corrective loss and clinical outcomes were also evaluated. Remodeling with β-TCP was found to be faster with UDPTCP than with SPTCP, even though the anteroposterior placement differed laterally in each patient. Furthermore, there was no correction loss, and the clinical outcomes were comparable, regardless of the placement of β-TCP.

Faster bone union progression and less sclerosis at the osteotomy margin after medial opening-wedge high tibial osteotomy using highly porous β-tricalcium phosphate granules versus allogeneic bone chips: A matched case-control study

BACKGROUND

This study compared bone union progression using highly porous (80% porosity) β-tricalcium phosphate (β-TCP) granules or allogeneic bone chips in the gap created by medial opening-wedge high tibial osteotomy (MOWHTO).

METHODS

The study population consisted of 54 patients who received MOWHTO with locking plate fixation: 27 patients using highly porous β-TCP granules, and 27 age- and sex-matched patients using allogeneic bone chips. Bone union progression was evaluated 1, 3, 6, and 12 months postoperatively. The presence of radiographic sclerosis at the osteotomy margin was also assessed.

RESULTS

Among all patients, the highest degree of bone union observed 12 months postoperatively was grade 4. As postoperative time passed, bone union progression of highly porous β-TCP granules increased linearly and was statistically significant compared with that of cancellous allogeneic bone chips (P = 0.014). The presence of radiographic sclerosis at the osteotomy margin was significantly less common in the β-TCP group than in the allograft group (P = 0.003) and was the strongest predictor of delayed progress of bone union (odds ratio = 6.16, P = 0.006).

CONCLUSIONS

Patients who underwent MOWHTO using highly porous β-TCP granules had faster new bone remodeling, less radiographic sclerosis at the osteotomy margin, and no inferior clinical outcome compared with allogeneic bone chips, as determined at the 1-year follow up. The presence of radiographic sclerosis at the osteotomy margin in patients undergoing MOWHTO using allogeneic bone or synthetic bone substitute may indicate delayed progress of bone union.

Type of bone graft and primary diagnosis were associated with nosocomial surgical site infection after high tibial osteotomy: analysis of a national database

PURPOSE

Although several small-scale studies have reported risk factors for surgical site infection (SSI) after high tibial osteotomy (HTO), no study has collectively analysed risk factors in a large cohort. The present study aimed to clarify the risk factors for SSI after HTO using a national database.

METHODS

Data of inpatients who underwent HTO from 2010 to 2017 were obtained from the Diagnosis Procedure Combination database in Japan. Outcome measures were the incidence of SSI and deep SSI after HTO. Associations between SSI and patient data were examined with multivariable logistic regression analysis.

RESULTS

Among 12,853 patients who underwent HTO, 195 developed SSI (1.52%) and 50 developed deep SSI (0.39%). Univariate analysis showed that male sex, smoking, and longer anaesthesia duration were associated with higher incidences of SSI, whereas a primary diagnosis of osteonecrosis and use of natural bone grafts were associated with lower incidences. In multivariable analysis, SSI was positively associated with male sex, anaesthesia duration longer than 210 min (vs. 150-210 min), and use of artificial bone graft (vs. natural bone graft). SSI was negatively associated with age ≤ 49 years (vs. 50-59 years) and a primary diagnosis of osteonecrosis (vs. osteoarthritis).

CONCLUSION

The present study revealed novel risk factors for SSI after HTO that previous studies have failed to find, including use of artificial bone graft and longer anaesthesia duration; primary diagnosis of osteonecrosis and younger age were novel protective factors. These findings will help surgeons assess risks of SSI after HTO in individual patients.

LEVEL OF EVIDENCE

III.

Combination of Cylindrical Autologous Bone Grafting Technique With a Metallic Block Insertion in Open-Wedge High Tibial Osteotomy

Open-wedge high tibial osteotomy (OW-HTO) is an effective surgical intervention for medial-compartment knee osteoarthritis. However, the osteotomized gap might be a disadvantage in OW-HTO because it can cause problems such as delayed bone union or loss of correction. These issues can be minimized by using autologous bone graft in the osteotomized gap, which is known to be the fastest and most clinically satisfactory gap filler. The primary mechanical stability of the osteotomy site in OW-HTO is essential for early weight bearing after surgery. Therefore, we introduce the combination of a cylindrical autologous bone grafting technique and a metallic block insertion for faster bone union and better primary stability of the site in OW-HTO. We expect that the described procedure will enable early postoperative weight bearing and, thereby, allow an early return to normal function.

Three-dimensional biofabrication of an aragonite-enriched self-hardening bone graft substitute and assessment of its osteogenicity in vitro and in vivo

A self-hardening three-dimensional (3D)-porous composite bone graft consisting of 65 wt% hydroxyapatite (HA) and 35 wt% aragonite was fabricated using a 3D-Bioplotter^®. New tetracalcium phosphate and dicalcium phosphate anhydrous/aragonite/gelatine paste formulae were developed to overcome the phase separation of the liquid and solid components. The mechanical properties, porosity, height and width stability of the end products were optimised through a systematic analysis of the fabrication processing parameters including printing pressure, printing speed and distance between strands. The resulting 3D-printed bone graft was confirmed to be a mixture of HA and aragonite by X-ray diffraction, Fourier transform infrared spectroscopy and energy dispersive X-ray spectroscopy. The compression strength of HA/aragonite was between 0.56 and 2.49 MPa. Cytotoxicity was assessed using the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay in vitro. The osteogenicity of HA/aragonite was evaluated in vitro by alkaline phosphatase assay using human umbilical cord matrix mesenchymal stem cells, and in vivo by juxtapositional implantation between the tibia and the anterior tibialis muscle in rats. The results showed that the scaffold was not toxic and supported osteogenic differentiation in vitro. HA/aragonite stimulated new bone formation that bridged host bone and intramuscular implants in vivo. We conclude that HA/aragonite is a biodegradable and conductive bone formation biomaterial that stimulates bone regeneration. Since this material is formed near 37°C, it will have great potential for incorporating bioactive molecules to suit personalised application; however, further study of its biodegradation and osteogenic capacity is warranted. The study was approved by the Animal Ethical Committee at Tongji Medical School, Huazhong University of Science and Technology (IACUC No. 738) on October 1, 2017.

Treating mouse skull defects with 3D-printed fatty acid and tricalcium phosphate implants

Skull surgery, also known as craniectomy, is done to treat trauma or brain diseases and may require the use of an implant to reestablish skull integrity. This study investigates the performance of 3D printed bone implants in a mouse model of craniectomy with the aim of making biodegradable porous implants that can ultimately be fitted to a patient's anatomy. A nonpolymeric thermoplastic bioink composed of fatty acids and β-tricalcium phosphate was used to 3D print the skull implants. Some of these were sintered to yield pure β-tricalcium phosphate implants. The performance of nonsintered and sintered implants was then compared in two semi-quantitative murine calvarial defect models using computed tomography, histology, and luciferase activity. Both types of implants were biocompatible, but only sintered implants promoted defect healing, with osseointegration to adjacent bone and the formation of new bone and bone marrow tissue in the implant pores. Luciferase scanning and histology showed that mesenchymal stem cells seeded onto the implants engraft and proliferate on the implants after implantation and contribute to forming bone. The experiments indicate that fatty acid-based 3D printing enables the creation of biocompatible and bone-forming β-tricalcium phosphate implants.

Bone forming ability of recombinant human collagen peptide granules applied with β-tricalcium phosphate fine particles

Recombinant human collagen peptide, developed based on human collagen type I, contains an arginyl-glycyl-aspartic acid (RGD)-rich motif to enhance cell behavior and is anticipated as a xeno-free polymer material for use in tissue engineering. We fabricated granules containing recombinant human collagen peptide (RCP) applied with beta-tricalcium phosphate fine particles (RCP/β-TCP) as bone filling scaffold material and assessed the bone forming ability of RCP/β-TCP. Recombinant peptide was thermal crosslinked and freeze-dried to prepare RCP. An aqueous dispersion of β-TCP fine particles was added to RCP to obtain RCP/β-TCP. Subsequently, RCP/β-TCP were characterized using scanning electron microscopy (SEM), energy dispersive X-ray spectrometry (EDX), and cell culture assessments. Furthermore, RCP/β-TCP were implanted into rat cranial bone defects for radiographic and histological evaluations. In SEM and EDX analyses of RCP/β-TCP, β-TCP particles dose-dependently covered the surface of RCP. Cell culture tests showed that RCP/β-TCP remarkably promoted proliferation and mRNA expression of various genes, such as integrin β1 and osteogenic markers, of osteoblastic MC3T3-E1 cells. Histomorphometric assessment at 4 weeks showed that RCP/β-TCP significantly promoted new skull bone formation compared to RCP (p < 0.05) and control (no application) (p < 0.01). Accordingly, these findings suggest RCP/β-TCP possess bone forming capability and would be beneficial for bone tissue engineering therapy.

The efficacy of porous hydroxyapatite chips as gap filling in open-wedge high tibial osteotomy in terms of clinical, radiological, and histological criteria

PURPOSE

Hydroxyapatite (HA) does not fully degrade, which raises concerns about poor remodeling and incorporation into the bone after open-wedge high tibial osteotomy (HTO). The purpose of this study was to compare the results between gap filling with allogenous chip bone and HA chip after open-wedge HTO using propensity score matching and to analyze the radiological unabsorbed area of opening gaps histologically in HA using patients.

METHODS

The matched variables were age, body mass index, sex, correction angle, and smoking status. After matching, the allogenous group and HA group included 33 patients each with two years of follow-up. The range of motion (ROM), International Knee Documentation Committee (IKDC) subjective score, Knee Injury and Osteoarthritis Outcome Score (KOOS), mechanical axis (MA), tibial slope, osteoconductivity, and absorbability were evaluated and compared between both groups. Among the HA group, 20 patients underwent bone biopsy and histologically analyzed of the radiological unabsorbed area.

RESULTS

The postoperative ROM, IKDC subjective score, and KOOS were similar in both groups. The osteoconductivities did not differ significantly. The absorbability in the HA group was significantly lower than allogenous group (59.6% vs. 22.6%, P < .001). The histological sections of the radiological unabsorbed area showed mature lamelliform bone tissues were significantly greater than structurally degraded remnant HA (30.4% and 4.2%, P < .001).

CONCLUSION

The HA chips showed an inferior absorbability, however, a mature lamelliform bone was observed in significantly larger amounts than remnant HA in the radiological unabsorbed area. The allogenous bone chips and HA chips showed similar clinical and radiological results after open-wedge HTO.

Lateral hinge fracture delays healing of the osteotomy gap in opening wedge high tibial osteotomy with a beta-tricalcium phosphate block

BACKGROUND

The purpose of this study was to investigate the healing process of synthetic bone grafts in opening wedge high tibial osteotomy (OWHTO) and to identify the factors that affect bone healing in OWHTO. It was hypothesized that lateral hinge fracture (LHF) is associated with delayed bone healing after OWHTO with synthetic bone grafting.

METHODS

The subjects included 350 knees of 283 patients who underwent OWHTO using two wedged blocks of beta-tricalcium phosphate (β-TCP) with 60% porosity. The healing of the osteotomy gap using a radiologic rating system for OWHTO with synthetic bone grafts and the presence of an LHF were assessed up to postoperative 24 months.

RESULTS

LHFs were found in 49 knees (14%). The osteotomy gap showed slower progression of radiographic healing with an LHF than without an LHF (P < .05). In the knees with LHFs, initial radiographic change in the osteotomy gap was observed almost at the same time as healing of the LHF. Multivariate logistic regression analysis identified LHF as the factor preventing the progression of bone healing (OR = 46.78, P < .05).

CONCLUSIONS

LHF is associated with delayed bone healing after OWHTO with synthetic bone grafting.

Analysis and quantification of bone healing after open wedge high tibial osteotomy

Background

The aim of this study was to analyze radiographic imaging techniques and to quantify bone ossification in the osteotomy gap after high tibial osteotomy.

Material and methods

Study phase 1: high tibial osteotomy was performed on six lower extremities of human body donors and experimental X‑rays and computed tomography (CT) scans were applied. Different techniques were evaluated by three specialists for best representation of the osteotomy gap.

Study phase 2: optimized radiological techniques were used for follow-up on 12 patients. The radiographs were examined by 3 specialists measuring 10 different parameters. The CT scans were analyzed with semiautomatic computer software for quantification of bone ossification.

Results

The osteotomy gap was best represented in 30° of flexion in the knee and 20° internal rotation of the leg. There were significant changes of the medial width over time (p < 0.019) as well as of the length of fused osteotomy, the Schröter score, sclerosis, trabecular structure and zone area measurements. Sclerosis, medial width of the osteotomy and area measurements were detected as reproducible parameters. Bone mineral density was calculated using CT scans, showing a significantly higher value 12 weeks postoperatively (112.5 mg/cm³) than at baseline (54.6 mg/cm³). The ossification of the gap was visualized by color coding.

Conclusion

Sclerosis and medial width of the osteotomy gap as well as area measurements were determined as reproducible parameters for evaluation of bone healing. Quantification of bone ossification can be calculated with CT scans using a semiautomatic computer program and should be used for research in bone healing.

Enhanced osteogenic proliferation and differentiation of human adipose-derived stem cells on a porous n-HA/PGS-M composite scaffold

This study explored the applicability, cellular efficacy, and osteogenic activities of porous nano-hydroxyapatite/Poly (glycerol sebacate)-grafted maleic anhydride (n-HA/PGS-g-M) composite scaffolds. Nuclear magnetic resonance (NMR) analyses indicated that approximately 43% of the hydroxide radicals in PGS were displaced by maleic anhydride. Resonance bands at 1036 cm^-1 occurred in scaffolds containing nHA powders, and peak areas increased when n-HA weight increased in PGS-M-n-HA-0.4, PGS-M-n-HA-0.5, and PGS-M-n-HA-0.6 scaffolds. The n-HA/PGS-g-M composite scaffolds exhibited porous microstructure with average pore size of 150-300 µm in scanning electron microscopy (SEM) analysis. Differential scanning calorimetry (DSC) identified the glass transition temperature (Tg) as -25-30 °C, indicative of quality resilience. The modulus of compressibility increased when n-HA content increased. Interestingly, viability of human adipose-derived stem cells (hADSCs) in vitro and expression of the osteogenic related genes RUNX2, OCN, and COL1A1 was enhanced in the n-HA/PGS-g-M composite scaffolds compared to those factors observed in PGS-g-M scaffolds. Finally, simulated body fluid (SBF) tests indicated more apatite deposits on the surface of n-HA/PGS-g-M scaffolds compared to PGS-g-M scaffolds. Overall, porous n-HA/PGS-g-M composite scaffolds possessed acceptable biocompatibility and mechanical properties, and they stimulated hADSC cell proliferation and differentiation. Given these qualities, the composite scaffolds have potential applications in bone tissue engineering.

Computer-Assisted Three-Dimensional Corrective Osteotomy for Malunited Fractures of the Distal Radius Using Prefabricated Bone Graft Substitute

BACKGROUND

Three-dimensional computed tomography (3D-CT) imaging has enabled more accurate preoperative planning. The purpose of this study was to investigate the results of a novel, computer-assisted, 3D corrective osteotomy using prefabricated bone graft substitute to treat malunited fractures of the distal radius.

METHODS

We investigated 19 patients who underwent the computer-assisted 3D corrective osteotomy for a malunited fracture of the distal radius after the operation was stimulated with CT data. A prefabricated bone graft substitute corresponding to the patient's bone defect was implanted and internal fixation was performed using a plate and screws. We compared postoperative radiographic parameters of the patient's operated side with their sound side and analyzed clinical outcomes using Mayo wrist score.

RESULTS

All patients achieved bone union on X-ray imaging at final follow-up. The mean differences of palmar tilt, radial inclination and ulnar variance between the operation side and the sound side were 4.3°, 2.3° and 1.2 mm, respectively. The Mayo wrist score was fair in 4 patients and poor in 15 patients before surgery. At the final follow-up after surgery, the scores improved to excellent in 3 patients, good in 11 patients and fair in 5 patients. There were two patients with correction loss at the final follow-up, but no patient complained of hand joint pain.

CONCLUSIONS

We believe that computer-assisted 3D corrective osteotomy using prefabricated bone graft substitute achieved good results because it worked as a guide to the accurate angle.

Doping β-TCP as a Strategy for Enhancing the Regenerative Potential of Composite β-TCP-Alkali-Free Bioactive Glass Bone Grafts. Experimental Study in Rats

The present work aims at evaluating the potential gains derived from partially replacing calcium in resorbable β-tricalcium phosphate (β-TCP) by two different molar percentages of strontium (5, 10) and zinc (1, 2), concomitantly with a fixed molar percentage (0.5) of manganese. Synthetic granular composite bone filling grafts consisting of doped β-TCP and an alkali-free bioactive glass were prepared and implanted in ~4 mm diameter bone defects drilled in the calvaria of Wistar rats used as animal models. The animals were sacrificed after 9 weeks of implantation and the calvaria was excised. Non-manipulated bone was used as positive control, while empty defects were used as a negative control group. The von Kossa staining revealed an enhanced new bone formation with increasing doping levels, supporting the therapeutic effects exerted by the doping elements. The percentage of newly formed bone was similar when the defects were filled with autologous bone, BG (previous results) or 3TCP2/7BG, which indicates that the latter two are excellent candidates for replacement of autologous bone as bone regeneration material. This finding confirms that doping with suitable doses of therapeutic ions is a good strategy towards transposing the bone graft materials to biomedical applications in humans.

Bone substitutes: a review of their characteristics, clinical use, and perspectives for large bone defects management

Bone replacement might have been practiced for centuries with various materials of natural origin, but had rarely met success until the late 19th century. Nowadays, many different bone substitutes can be used. They can be either derived from biological products such as demineralized bone matrix, platelet-rich plasma, hydroxyapatite, adjunction of growth factors (like bone morphogenetic protein) or synthetic such as calcium sulfate, tri-calcium phosphate ceramics, bioactive glasses, or polymer-based substitutes. All these substitutes are not suitable for every clinical use, and they have to be chosen selectively depending on their purpose. Thus, this review aims to highlight the principal characteristics of the most commonly used bone substitutes and to give some directions concerning their clinical use, as spine fusion, open-wedge tibial osteotomy, long bone fracture, oral and maxillofacial surgery, or periodontal treatments. However, the main limitations to bone substitutes use remain the management of large defects and the lack of vascularization in their central part, which is likely to appear following their utilization. In the field of bone tissue engineering, developing porous synthetic substitutes able to support a faster and a wider vascularization within their structure seems to be a promising way of research.

Biomaterial Property Effects on Platelets and Macrophages: An in Vitro Study

The purpose of this study was to evaluate the effects of surface properties of bone implants coated with hydroxyapatite (HA) and β-tricalcium phosphate (β-TCP) on platelets and macrophages upon implant installation and compare them to grit-blasted Ti and Thermanox used as a control. Surface properties were characterized using scanning electron microscopy, profilometry, crystallography, Fourier transform infrared spectroscopy, and coating stability. For platelets, platelet adherence and morphology were assessed. For macrophages, morphology, proliferation, and polarization were evaluated. Surface characterization showed similar roughness of ∼2.5 μm for grit-blasted Ti discs, both with and without coating. Coating stability assessment showed substantial dissolution of HA and β-TCP coatings. Platelet adherence was significantly higher for grit-blasted Ti, Ti-HA, and Ti-β-TCP coatings compared to that of cell culture control Thermanox. Macrophage cultures revealed a decreased proliferation on both HA and β-TCP coated discs compared to both Thermanox and grit-blasted Ti. In contrast, secretion of pro-inflammatory cytokine TNF-α and anti-inflammatory cytokine TGF-β were marginal for grit-blasted Ti and Thermanox, while a coating-dependent increased secretion of pro- and anti-inflammatory cytokines was observed for HA and β-TCP coatings. The results demonstrated a significantly upregulated pro-inflammatory and anti-inflammatory cytokine secretion and marker gene expression of macrophages on HA and β-TCP coatings. Furthermore, HA induced an earlier M1 macrophage polarization but more M2 phenotype potency than β-TCP. In conclusion, our data showed that material surface affects the behaviors of first cell types attached to implants. Due to the demonstrated crucial roles of platelets and macrophages in bone healing and implant integration, this information will greatly aid the design of metallic implants for a higher rate of success in patients.