Boosting of Power Conversion Efficiency of 2D ZnO Nanostructures-Based DSSC by the Lorentz Force with Chitosan Polymer Electrolyte

Natural resources for dye-sensitized solar cells

While the development of dye-sensitized solar cells (DSSCs) has been ongoing for more than 30 years, the currently obtained efficiency is unsatisfactory. However, the study of DSSC development has produced a fundamental understanding of cell performance and inspired other devices, such as perovskite cell solar cells. DSSCs consist of a dye-sensitized photoanode, a counter electrode, and a redox couple in the electrolyte system. Each of the components has an important role and cofunctions with each other to obtain a high power conversion efficiency. Various modifications to each DSSC component have been applied to improve their performance. Additionally, to generate improvements, the effort to reduce production costs has been crucial. The utilization of natural sources for DSSC components is a possible solution to this issue. The utilization of natural resources also aims to increase the value of the natural resource itself. In this review, the applications of various natural sources for DSSC components are described, as well as the modification efforts that have been made to enhance their performance. The discussion covers the utilization of natural dye for sensitizer dyes in liquid DSSC applications: (1) utilization of biopolymers for quasi-solid DSSC electrolytes, (2) green synthesis methods for photoanode semiconductors, and (3) development of natural carbon counter electrodes. The detailed factors that influence improvements in cell performance are also addressed.

Advances on Dye-Sensitized Solar Cells (DSSCs) Nanostructures and Natural Colorants: A Review

Human beings are attempting to take advantage of renewable natural resources by using solar cells. These devices take the sun’s radiation and convert it into electrical energy. The issue with traditional silicon-based solar cells is their manufacturing costs and environmental problems. For this reason, alternatives have been developed within the solar cell field. One of these alternatives is the dye-sensitized solar cell (DSSC), also known as Grätzel solar cells. DSSCs are a type of solar cell that mimics photosynthesis. They have a photoanode, which is formed by a semiconductor film sensitized with a dye. Some of their advantages include low-cost manufacturing, eco-friendly materials use, and suitability for most environments. This review discusses four important aspects, with two related to the dye, which can be natural or synthetic. Herein, only natural dyes and their extraction methods were selected. On the other hand, this paper discusses the nanostructures used for DSSCs, the TiO2 nanostructure being the most reported; it recently reached an efficiency level of 10.3%. Finally, a review on the novelties in DSSCs technology is presented, where it is observed that the use of Catrin protein (cow brain) shows 1.45% of efficiency, which is significantly lower if compared to Ag nanoparticles doped with graphene that report 9.9% efficiency.

Recent Advances in Chitin and Chitosan/Graphene-Based Bio-Nanocomposites for Energetic Applications

Herein, we report recent developments in order to explore chitin and chitosan derivatives for energy-related applications. This review summarizes an introduction to common polysaccharides such as cellulose, chitin or chitosan, and their connection with carbon nanomaterials (CNMs), such as bio-nanocomposites. Furthermore, we present their structural analysis followed by the fabrication of graphene-based nanocomposites. In addition, we demonstrate the role of these chitin- and chitosan-derived nanocomposites for energetic applications, including biosensors, batteries, fuel cells, supercapacitors and solar cell systems. Finally, current limitations and future application perspectives are entailed as well. This study establishes the impact of chitin- and chitosan-generated nanomaterials for potential, unexplored industrial applications.

Highly Ordered TiO2 Nanotube Electrodes for Efficient Quasi-Solid-State Dye-Sensitized Solar Cells

Free-standing TiO2 nanotube (NT) electrodes have attracted much attention for application in solid- or quasi-solid-state dye-sensitized solar cells (DSSCs) because of their suitable pore structure for the infiltration of solid electrolytes. However, few studies have been performed on the relationship between nanostructures of these NT electrodes and the photovoltaic properties of the solid- or quasi-solid-state DSSCs. Here, we prepare vertically aligned and highly ordered TiO2 NT electrodes via a two-step anodization method for application in quasi-solid-state DSSCs that employs a polymer gel electrolyte. The length of NT arrays is controlled in the range of 10–42 μm by varying the anodization time, and the correlation between NT length and the photovoltaic properties of quasi-solid-state DSSCs is investigated. As the NT length increases, the roughness factor of the electrode is enlarged, leading to the higher dye-loading; however, photovoltage is gradually decreased, resulting in an optimized conversion efficiency at the NT length of 18.5 μm. Electrochemical impedance spectroscopy (EIS) analysis reveals that the decrease in photovoltage for longer NT arrays is mainly attributed to the increased electron recombination rate with redox couples in the polymer gel electrolyte.