A Negatively Charged Hydrophobic Hemi-micelle of Fe3O4/Ag MNP Role Towards SERS, Photocatalysis and Bactericidal

Rational design of CdS-enwrapped polypyrrole nanoparticles for wastewater treatment: removal of hazardous pollutants in aqueous solutions

The modern world requires a chemical industry that can run at low production costs while producing high-quality products with minimal environmental impact. The development of environmentally friendly, cost-effective, and efficient wastewater treatment materials remains a major problem for the sustainable approach. We prepared nanoscale cadmium sulfide (CdS)-enwrapped polypyrrole (PPy) polymer composites for degradation of organic pollutants. The prepared CdS@PPy nanocomposites were characterized by powder X-ray diffraction, scanning electron microscope (SEM), field emission scanning electron microscope (FESEM), Fourier transform infrared spectroscopy (FTIR), and ultraviolet-visible (UV) absorption spectroscopy, indicating proper intercalation between CdS and PPy. Consequently, the catalytic efficiency of the synthesized hybrid nanocomposites was analyzed through the degradation of methylene blue (MB) and rhodamine B (Rh B) under visible light irradiation. The measured degradation efficiency of the dye solutions under the photolysis process is about 18% and 23% for MB and Rh B dye, respectively. Furthermore, the recycle test result concludes that the CdS@PPy composite exhibits 91% and 89% of MB and Rh B dye degradation efficiency even at the 4th cycle, respectively. The positive synergistic impact of CdS and PPy may be the result of effective photocatalytic degradation of MB and RhB.

Silver-decorated SrTiO3 nanoparticles for high-performance supercapacitors and effective remediation of hazardous pollutants

SrTiO3/Ag nanocomposites were synthesized using a facile wet impregnation method, employing rigorous experimental techniques for comprehensive characterization. XRD, FTIR, UV, PL, FESEM, and HRTEM were meticulously utilized to elucidate their structural, functional, morphological, and optical properties. The electrochemical performance of the SrTiO3/Ag nanocomposite was rigorously assessed, revealing an impressive specific capacitance of 850 F/g at a current density of 1 A. Furthermore, the photocatalytic activity of the SrTiO3/Ag nanocomposite was rigorously examined using methylene blue (MB) dye, and the results were outstanding. After 120 min of UV irradiation, the nanocomposite exhibited an exceptional MB dye degradation efficiency exceeding 88%. The SrTiO3/Ag nanocomposite represents an exemplary catalyst in terms of efficiency, cost-effectiveness, environmental compatibility, and reusability. The electron and superoxide radicals play a chief role in the MB dye degradation process. The inclusion of Ag within the SrTiO3 matrix facilitated the formation of a conductive nano-network, ultimately resulting in superior capacitive and photocatalytic performance.

Study on Magnetic and Plasmonic Properties of Fe3O4-PEI-Au and Fe3O4-PEI-Ag Nanoparticles

Magnetic-plasmonic nanoparticles (NPs) have attracted great interest in many fields because they can exhibit more physical and chemical properties than individual magnetic or plasmonic NPs. In this work, we synthesized Au- or Ag-decorated Fe3O4 nanoparticles coated with PEI (Fe3O4-PEI-M (M = Au or Ag) NPs) using a simple method. The influences of the plasmonic metal NPs' (Au or Ag) coating density on the magnetic and plasmonic properties of the Fe3O4-PEI-M (M = Au or Ag) NPs were investigated, and the density of the plasmonic metal NPs coated on the Fe3O4 NPs surfaces could be adjusted by controlling the polyethyleneimine (PEI) concentration. It showed that the Fe3O4-PEI-M (M = Au or Ag) NPs exhibited both magnetic and plasmonic properties. When the PEI concentration increased from 5 to 35 mg/mL, the coating density of the Au or Ag NPs on the Fe3O4 NPs surfaces increased, the corresponding magnetic intensity became weaker, and the plasmonic intensity was stronger. At the same time, the plasmonic resonance peak of the Fe3O4-PEI-M (M = Au or Ag) NPs was red shifted. Therefore, there was an optimal coverage of the plasmonic metal NPs on the Fe3O4 NPs surfaces to balance the magnetic and plasmonic properties when the PEI concentration was between 15 and 25 mg/mL. This result can guide the application of the Fe3O4-M (M = Au or Ag) NPs in the biomedical field.

Strategic rationalization for improved photocatalytic decomposition of toxic pollutants: Immobilizing Bi2Te3 nanorods and V2O5 nanoparticles over MoS2 nanosheets

Researchers have become increasingly interested in solar energy based on semiconductor photocatalysts to remove hazardous pollutants and clean the environment. In this work, an efficient MoS2-Bi2Te3-V2O5 nanocomposite has been prepared through wet impregnation method. MoS2-Bi2Te3-V2O5 photocatalyst was utilized to decompose the MB and Rh B dyes. The photocatalytic efficiency (Rh B) of MoS2-Bi2Te3-V2O5 nanocomposite (95.19 %) was higher than 2.70 times of Bi2Te3 nanorods, 1.55 times of V2O5 nanoparticles, 1.68 times of MoS2 nanosheets, 1.50 times of MoS2-Bi2Te3, and 1.21 times of MoS2-V2O5 nanocomposite, respectively. Recycling tests conducted on the MoS2-Bi2Te3-V2O5 nanocomposite revealed its high stability and durability. The outcomes obtained from the scavenger test suggest that the photogenerated hydroxyl radicals play a chief role in the photocatalytic performance of Rh B dye in the MoS2-Bi2Te3-V2O5 nanocomposite, respectively. The enhanced photocatalytic performance of the MoS2-Bi2Te3-V2O5 nanocomposite is ascribed to the strong hybrid formation of Bi2Te3, V2O5, and MoS2 nanosheets, respectively. Consequently, the straightforward and readily synthesized MoS2-Bi2Te3-V2O5 nanocomposite can serve as an economical, highly effective material for environmental applications.

Functionalization of Fluorine on the Surface of SnO2-Mg Nanocomposite as an Efficient Photocatalyst for Toxic Dye Degradation

This work reports on the photocatalytic activity of tin oxide (SnO2)-doped magnesium (Mg) and fluorine (F) nanoparticles for methyl orange and safranin dye degradation under sunlight irradiation. Nanocatalysis-induced dye degradation was examined using UV-visible spectroscopy and a pseudo-first-order kinetics model. The results indicate that the prepared nanoparticles exhibit superior photocatalytic activity, and the degradation of methyl orange (MO) dye is approximately 82%. In contrast, the degradation of safranin dye is 96% in the same time interval of 105 min. The calculated crystallite size of the SnO2-Mg-F nanocomposite is 29.5 nm, which respects the particle size found in the DLS analysis with a tetragonal structure and spherical morphology affirmed. The optical characteristics were assessed, and their respective bandgap energies were determined to be 3.6 eV. The influence of F in Mg and SnO2 is recognized with the XRD and FT-IR spectra of the prepared particles.

Photocatalytic degradation of organic pollutants and inactivation of pathogens under visible light via SnO2/rGO composites

The domains of environmental cleanup and pathogen inactivation are particularly interesting in nanocomposites (NCs) due to their exceptional physicochemical properties. Tin oxide/reduced graphene oxide nanocomposites (SnO₂/rGO NCs) have potential uses in the biological and environmental fields, but little is known about them. This study aimed to investigate the photocatalytic activity and antibacterial efficiency of the nanocomposites. The co-precipitation technique was used to prepare all the samples. XRD, SEM, EDS, TEM, and XPS analyses were employed to characterize the physicochemical properties of SnO₂/rGO NCs for structural analysis. The rGO loading sample resulted in a decrease in the crystallite size of SnO₂ nanoparticles. TEM and SEM images demonstrate the firm adherence of SnO₂ nanoparticles to the rGO sheets. The chemical state and elemental composition of the nanocomposites were validated by the XPS and EDS data. Additionally, the visible-light active photocatalytic and antibacterial capabilities of the synthesized nanocomposites were assessed for the degradation of Orange II and methylene blue, as well as the suppression of the growth of S. aureus and E. coli. As a result, the synthesized SnO₂/rGO NCs are improved photocatalysts and antibacterial agents, expanding their potential in the fields of environmental remediation and water disinfection.

Eco-friendly approaches of mycosynthesized copper oxide nanoparticles (CuONPs) using Pleurotus citrinopileatus mushroom extracts and their biological applications

This current study aims to develop a unique biomaterial that can fight against oxidative stress and microbial infections without causing any harm. As a result, an easy-to-make, environment-friendly, long-lasting, and non-toxic copper oxide nanoparticle (CuONP) was synthesized using an edible mushroom Pleurotus citrinopileatus extract. The UV-visa spectroscopy analyses reflected a sharp absorbance peak at 250 nm. The FTIR, XRD, SEM, HR-TEM, and EDX instrumental tools were used to characterize the myco-produced CuONPs. The face-centred cubic (FCC) CuONPs were found to have diffraction peaks at the planes of (110), (002), (111), (112), (020), (202), (113), (310), (220), and (004). The HR-TEM result showed the particles having a spherical structure and an average nanoparticles size of 20 nm. The antimicrobial activity results expressed the broad spectrum of antibacterial effect and the better growth inhibition zone was recorded in P. aeruginosa (8.3 ± 0.1), E. coli (7.4 ± 0.3), K. pneumoniae (7.2 ± 0.1), S. aureus (7.1 ± 0.3), S. pneumoniae (6.3 ± 0.2), and B. cereus (6.2 ± 0.3). The cytotoxicity efficacy of myco-synthesized CuONPs tested against a cancer cell line (HT-29) observed the best result in low doses of mushroom extract (45.62 μg/mL). Based on the outcome of the study suggests that the mycosynthesized CuONPs using Pleurotus mushroom extract might serve as an alternative agent for biomedical applications in the near future.

Synthesis of PVDF membrane loaded with wrinkled Au NPs for sensitive detection of R6G

A novel SERS membrane is synthesized by combining metal lattice and surface enhanced Raman scattering (SERS) technology. Since R6G is a carcinogenic and harmful pollutant, and traditional detection methods have many drawbacks and have research value, this paper selects R6G as the detection target. The SERS substrates are synthesized by loading Au nanoparticles (Au NPs) on the surface of polyvinylidene fluoride (PVDF) membrane. The Au NPs are synthesized through a controllable hydrothermal method. The synthesized AuNPs are covered by some gold particles, forming a fold pattern. Finally, the synthesized structure is immobilized on the surface of the PVDF membrane by the phase inversion method. It is suggested that the prepared Au NPs@PVDF membrane exhibits adjustable cavity structure, strong plasmon coupling, tunable magnetic plasmon resonance, prominent SERS performances. The prepared Au NPs@PVDF membrane showed sensitive SERS activity, good mechanical strength and reusability, expanding the application field of SERS detection. Overall, this study establishes a novel technique for the synthesis of SERS membrane with excellent SERS property and expands the application field of SERS detection.