Ce-MOF Nanosphere as Colorimetric Sensor with High Oxidase Mimicking Activity for Sensitive Detection of H2O2

Ratio Fluorescence Sensor Based on Bimetal MOFs for the Detection of Hg2+and H2O2

In this work, a dual-emission material based on lanthanide metals was synthesized and used as a ratio fluorescence sensor to respond to Hg2+ and H2O2, respectively. Tb-BDC-NH2 as a bimetal MOFs had double ligands and exhibited double fluorescence emission peaks at 550 nm and 450 nm. The two emission peaks of Tb-BDC-NH2 can be quenched by Hg2+ and H2O2 respectively, forming a built-in calibration signal for ratio fluorescence detection. Based on the different detection conditions of the Hg2+ and H2O2, the simultaneous detection of the two detection substances can be achieved with simple operation. This detection system had good stability and anti-interference ability. Under optimal conditions, the detection limit for Hg2+ detection was 0.2 µM. Meanwhile, for the detection of H2O2, the detection limit was 11 µM and large linear ranges were obtained. Through actual sample testing, it had been proven that the ratio fluorescence sensor based on Tb-BDC-NH2 had good application prospects. And the work also provided a new idea for double substances detection.

Gold nanoclusters stabilized with dopa-containing ligands: Catalyst-indicator integrated probe for tumor cell screening

Elevated hydrogen peroxide (H2O2) levels not only inflict cellular damage but also serve as a harbinger for various diseases. Tumor cells, in particular, often exhibit an abundance of H2O2. Hence, the detection of this pivotal molecule assumes paramount importance in monitoring physiological states and expediting cancer diagnosis. To this end, we have ingeniously devised an enzyme-free and monomeric system for intracellular H2O2 detection. Our astute selection of dopa-containing peptidomimetics, replete with ortho-bisphenol and amino acid moieties, has engendered the synthesis of distinctive fluorescent gold nanoclusters (AuNCs). These nanoclusters not only function as a peroxidase-like catalyst, catalyzing the decomposition of H2O2 into hydroxyl radicals (·OH), but also serve as an indicator, with their fluorescence quenched in response to varying H2O2 concentrations. Experimental results evince that our GDpE-AuNCs exhibit remarkable sensitivity, boasting a detection limit of 0.49 μM and a linear range of 5-1000 μM. Moreover, the amalgamation of catalyst and indicator within a single structure, facilitating efficient cellular uptake, engenders intracellular H2O2 detection and discernment of tumor cells. This pioneering approach bequeaths a valuable assay probe for monitoring physiological states and ushering in early disease diagnosis.

Optimization of cerium-based metal-organic framework synthesis for maximal sonophotocatalytic tetracycline degradation

Wastewater treatment is inevitably required to alleviate the pollution of water resources by various contaminants such as antibiotics. MOFs are novel materials with photocatalytic activities. In this study, sonophotocatalytic degradation of tetracycline (TC) by the Cerium-based MOF (Ce-MOF) is optimized by modification of its synthesis route. Ce-MOF synthesis by room temperature (RT), hydrothermal (HT), and sonochemical synthesis (SC) are studied. TC degradation experiments revealed the superiority of SC synthesis. The interplay of main synthesis parameters, namely, initial ligand concentration, ultrasound (US) power and time on sonophotocatalytic activity of Ce-MOF, were investigated by response surface methodology model (RSM) utilizing the central composite experimental design (CCD). The optimum SC synthesis conditions are an initial ligand concentration of 8.4 mmol/L, a sonication power of 50 amplitude, and a US time of 60 min. The optimally synthesized Ce-MOF was characterized by infrared spectroscopy, FTIR, XRD, FE-SEM, TEM, zeta potential analysis, diffuse reflectance spectroscopy, particle size analysis, Mott-Schottky analysis, photocurrent analysis, electrochemical impedance spectra, and photoluminescence spectroscopy. The findings indicate that the removal efficiency of TC can reach up to 81.75% within 120 min in an aqueous solution containing an initial TC concentration of 120 ppm and 1 g/L Ce-MOF at pH of 7. Mineralization efficiency of the process is 71% according to COD measurements. The Ce-MOF catalyst retained its chemical stability and remained active upon TC degradation which makes it a promising candidate for wastewater treatment.

Research progress of metal-organic framework nanozymes in bacterial sensing, detection, and treatment

The high efficiency and specificity of enzymes make them play an important role in life activities, but the high cost, low stability and high sensitivity of natural enzymes severely restrict their application. In recent years, nanozymes have become convincing alternatives to natural enzymes, finding utility across diverse domains, including biosensing, antibacterial interventions, cancer treatment, and environmental preservation. Nanozymes are characterized by their remarkable attributes, encompassing high stability, cost-effectiveness and robust catalytic activity. Within the contemporary scientific landscape, metal-organic frameworks (MOFs) have garnered considerable attention, primarily due to their versatile applications, spanning catalysis. Notably, MOFs serve as scaffolds for the development of nanozymes, particularly in the context of bacterial detection and treatment. This paper presents a comprehensive review of recent literature pertaining to MOFs and their pivotal role in bacterial detection and treatment. We explored the limitations and prospects for the development of MOF-based nanozymes as a platform for bacterial detection and therapy, and anticipate their great potential and broader clinical applications in addressing medical challenges.

Adenine phosphate-Cu nanozyme with multienzyme mimicking activity for efficient degrading phenolic compounds and detection of hydrogen peroxide, epinephrine and glutathione

BACKGROUND

With the development of nanotechnology, various nanomaterials with enzyme-like activity (nanozymes) have been reported. Due to their superior properties, nanozymes have shown important application potential in the fields of bioanalysis, disease detection, and environmental remediation. However, only a few nanomaterials with multi-enzyme mimicry activity have been reported. In this study, a novel multienzyme mimic was synthesized through a simple and rapid preparation protocol by coordinating copper ions with N3, N6 (amino), N7, and N9 on adenine phosphate.

RESULTS

The prepared adenine phosphate-Cu complex exhibits significant peroxidase, laccase, and oxidase mimicking activities. The Michaelis-Menten constant (Km) and the maximal velocity (Vmax) values of the peroxidase, laccase, and oxidase mimicking activities of AP-Cu nanozyme are 0.052 mM, 0.14 mM, and 2.49 mM; and 0.552 μM min-1, 6.70 μM min-1, and 2.24 μM min-1, respectively. Then, based on its laccase mimicking activity, the nanozyme was applied in the degradation of phenolic compounds. The calculated kinetic constant for the degradation of 2,4-dichlorophenol is 0.468 min-1 and the degradation efficiency of 2,4-dichlorophenol (0.1 mM) reaches 96.14% at 7 min. Finally, based on the multienzyme mimicking activity of adenine phosphate-Cu nanozyme, simple colorimetric sensing methods with high sensitivity and good selectivity were developed for the detection of hydrogen peroxide, epinephrine, and glutathione in the ranges of 20.0-200.0 μM (R2 = 0.9951), 5.0-100.0 μM (R2 = 0.9970), and 5.0-200.0 μM (R2 = 0.9924) with the limits of quantitation of 20.0 μM, 5.0 μM, and 5.0 μM, respectively.

SIGNIFICANCE

In short, the synthesis of nanozymes with multi-enzyme mimicry activity through coordination between copper ions and small molecule mimicry enzymes provides new ideas for the design and research of multi-enzyme mimics.

Amorphization-Modulated Metal Sulfides with Boosted Active Sites and Kinetics for Efficient Enzymatic Colorimetric Biodetection

Colorimetric biosensing has become a popular sensing method for the portable detection of a variety of biomarkers. Artificial biocatalysts can replace traditional natural enzymes in the fields of enzymatic colorimetric biodetection; however, the exploration of new biocatalysts with efficient, stable, and specific biosensing reactions has remained challenging so far. Here, to enhance the active sites and overcome the sluggish kinetics of metal sulfides, the creation of an amorphous RuS₂ (a-RuS₂ ) biocatalytic system is reported, which can dramatically boost the peroxidase-mimetic activity of RuS₂ for the enzymatic detection of diverse biomolecules. Due to the existence of abundant accessible active sites and mildly surface oxidation, the a-RuS₂ biocatalyst displays a twofold V_max value and much higher reaction kinetics/turnover number (1.63 × 10^-2 s^-1 ) compared to that of the crystallized RuS₂ . Noticeably, the a-RuS₂ -based biosensor shows an extremely low detection limit of H₂ O₂ (3.25 × 10^-6 m), l-cysteine (3.39 × 10^-6 m), and glucose (9.84 × 10^-6 m), respectively, thus showing superior detection sensitivity to many currently reported peroxidase-mimetic nanomaterials. This work offers a new path to create highly sensitive and specific colorimetric biosensors in detecting biomolecules and also provides valuable insights for engineering robust enzyme-like biocatalysts via amorphization-modulated design.

Decorating Zirconium on Graphene Oxide to Design a Multifunctional Nanozyme for Eco-Friendly Detection of Hydrogen Peroxide

Peroxidase enzymes are crucial in analytical chemistry owing to significant peroxide analytes and their key role in hydrogen peroxide (H2O2) detection. Therefore, exploiting appropriate catalysts for the peroxidase like reactions has become crucial for achieving desired analytical performance. Zirconium (Zr) has attracted growing interest, as a safe and stable potential eco-friendly catalyst for various organic transformations that address increasing environmental challenges. Hence, aiming at fast, sensitive and selective optical detection of H2O2, a colorimetric platform is presented here, based on the excellent peroxidase enzyme-like activity of Zr decorated on graphene oxide (GO). The synergistic effect achieved due to intimate contact between an enzyme like Zr and the high surface area 0f GO ensures efficient electron transfer that increases the chemical and catalytic activity of the composite and advances the decomposition of H2O2 into hydroxyl radicals. The designed probe, thus, efficiently catalyzes the oxidation of 3,3′,5,5′-tetramethylbenzidine (TMB), via hydroxyl radicals, thereby transforming the colorless TMB into blue oxidized TMB within 2 min. The catalytic mechanism of the Zr-GO enzyme mimic is proposed herein and verified using a fluorescent probe terephthalic acid (TA) and other scavenger experiments. The multifunctional optical probe allows sensitive and highly selective recognition of H2O2 in a linear range from 100 to 1000 µM with a low detection limit of 0.57 µM. Essentially, the direct accessibility of Zr prevents having to use the complicated preparation and purification procedures mostly practiced for conventional biozymes and nanozymes. The devised method offers several gains, including being green and an inexpensive catalyst, having lower LOD, being fast, cost-effective and sensitive, and having selective work-up procedures.