The preparation of PZS-OH/CNT composite and its adsorption of U(VI) in aqueous solutions

Efficient Removal of Uranium(VI) from Aqueous Solutions by Triethylenetetramine-Functionalized Single-Walled Carbon Nanohorns

In the present study, SWCNH-COOH and SWCNH-TETA were fabricated using single-walled carbon nanohorns (SWCNHs) via carboxylation and grafting with triethylenetetramine (TETA) for uranium (VI) ion [U(VI)] removal. The morpho-structural characterization of as-prepared adsorbing materials was performed by transmission electron microscopy, X-ray diffractometry, Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS). Several parameters including the pH value of the aqueous solutions, contact time, temperature, and U(VI) concentration were used to evaluate the sorption efficiency of SWCNH-COOH and SWCNH-TETA. The Langmuir isotherm model could well represent the as-obtained adsorption isotherms, and the kinetics was successfully modeled by pseudo-second-order kinetics in the adsorption process. The maximum adsorption capacity of SWCNH-TETA was calculated as 333.13 mg/g considering the Langmuir isotherm model. Thermodynamic studies showed that adsorption proved to be a spontaneous endothermic process. Moreover, SWCNH-TETA exhibited excellent recycling performance and selective adsorption of uranium. Furthermore, the possible mechanism was investigated by XPS and density functional theory calculations, indicating that the excellent adsorption was attributed to the cooperation capability between uranium ions and nitrogen atoms in SWCNH-TETA. This efficient approach can provide a strategy for developing high-performance adsorbents for U(VI) removal from wastewater.

N, P and S co-doped carbon materials derived from polyphosphazene for enhanced selective U(VI) adsorption

Herein, the precursor polyphosphazene was synthesized by the polymerization of hexachlorocyclotriphosphazene (HCCP) and bis(4-hydroxyphenyl) sulfone (BPS). The adsorbent which was codoped with N, P and S (amidate-CS) was developed from the precursor by using the carbonization method. The images of Scanning electron microscope (SEM) and Transmission electron microscope (TEM) indicate that the amidate-CS possessed porous graphene-like carbon lamellar structure. The excellent behaviors with respect to kinetics (120 min for equilibrium) and thermodynamics (maximum removal of 290 mg/g when pH was at 6.0) revealed the outstanding performance of amidate-CS in removing U(VI), which is due to the functional groups and strong covalent bonds between heteroatoms and uranyl ions. The adsorption of amidate-CS followed the pseudo-second-order kinetic and Langmuir adsorption model. The thermodynamic parameters indicate that the process was spontaneous and endothermic. The adsorption and desorption efficiency of amidate-CS had a slight decrease after five cycles, indicating excellent regeneration performance. Overall, the amidate-CS is a prospective candidate for highly selective U(VI) removing.

Ultra-High Performance of Hyper-Crosslinked Phosphate-Based Polymer for Uranium and Rare Earth Element Adsorption in Aqueous Solution

In this work, a new type of hyper-crosslinked phosphate-based polymer (HCPP) polymerized by bis(2-methacryloxyethyl)phosphate has been developed for uranium and rare earth element (REE) extraction in an aqueous solution. The influence of the pH value, contact time, initial concentration, temperature, and competing ions on uranium adsorption of HCPP is investigated in detail. HCPP exhibits a maximum uranium adsorption capacity of up to 800 mg g^-1 at pH = 6.0 and excellent selectivity toward uranium adsorption over coexisting ions, because of the high affinity between HCPP and uranium ions and dense phosphate groups on the backbone. It also demonstrates high adsorption performance in both simulated seawater with a high salt concentration and a real nuclear industrial effluent. Besides, the crosslinked network structure of HCPP endows this polymer with high chemical stability and reusability. Furthermore, the adsorption mechanism is probed by energy-dispersive spectroscopy, X-ray photoelectron spectroscopy, and Fourier transform infrared measurements. It is confirmed that the adsorption of uranium on the adsorbent originates from the interaction between phosphate groups and uranium ions. Meanwhile, HCPP also displays high REE adsorption capacities. This work indicates that the phosphate-based HCPP could be utilized as a promising adsorbent for the effective removal of uranium and REEs from aqueous solution.