Alginate-enfolded copper hexacyanoferrate graphene oxide granules for adsorption of low-concentration cesium ions from aquatic environment

Cesium adsorption from an aqueous medium for environmental remediation: A comprehensive analysis of adsorbents, sources, factors, models, challenges, and opportunities

Considering the widespread and indispensable nature of nuclear energy for future power generation, there is a concurrent increase in the discharge of radioactive Cs into water streams. Recent studies have demonstrated that adsorption is crucial in removing Cs from wastewater for environmental remediation. However, the existing literature lacks comprehensive studies on various adsorption methods, the capacities or efficiencies of adsorbents, influencing factors, isotherm and kinetic models of the Cs adsorption process. A bibliometric and comprehensive analysis was conducted using 1179 publications from the Web of Science Core Collection spanning from 2014 to 2023. It reviews and summarizes current publication trends, active countries, adsorption methods, adsorption capacities or efficiencies of adsorbents, tested water sources, influencing factors, isotherm, and kinetic models of Cs adsorption. The selection of suitable adsorbents and operating parameters is identified as a crucial factor. Over the past decade, due to their notable capacity for Cs adsorption, considerable research has focused on novel adsorbents, such as Prussian blue, graphene oxide, hydrogel, and nanoadsorbents (NA). However, there remains a need for further development of application-oriented laboratory-scale experiments. Future research directions should encompass exploring adsorption mechanisms, developing new adsorbents or their combinations, practical applications of lab-scale studies, and recycling radioactive Cs from wastewater. Drawing upon this literature review, we present the most recent research patterns concerning adsorbents to remove Cs, outline potential avenues for future research, and delineate the obstacles hindering effective adsorption. This comprehensive bibliometric review provides valuable insights into prevalent research focal points and emerging trends, serving as a helpful resource for researchers and policymakers seeking to understand the dynamics of adsorbents for Cs removal from water.

Separation and Removal of Radionuclide Cesium from Water by Biodegradable Magnetic Prussian Blue Nanospheres

As the main component of radioactive wastewater, the cesium ion has seriously endangered the environment and human health. Prussian blue nanoparticles (PB NPs) are used as adsorbents for the purification of cesium-containing wastewater because of their ability to selectively adsorb cesium ions. In this work, novel magnetic Prussian blue nanospheres (MPBNs) were developed from polylactic acid nanospheres as a carrier, loaded with Fe3O4 nanoparticles (Fe3O4 NPs) inside and PB NPs outside for the removal of cesium ions with the help of magnetic separation. Meanwhile, the effects on the adsorption efficiency of MPBNs, such as pH, time, temperature and initial concentration of cesium ion solution, were studied. The adsorption isotherms, kinetic models and adsorption thermodynamics were investigated to research the absorption mechanism. The results showed that MPBNs were spherical with a rough surface, and their particle size, iron content and saturation magnetization were 268.2 ± 1.4 nm, 40.01% and 41.71 emu/g, which can be recovered by magnetic separation. At 293 K, MPBNs could reduce the cesium ion solution from 40 mg/L to 4.8 mg/L, and its cesium ion removal rate and adsorption capacity were 82.46% and 16.49 mg/g, respectively. The optimum pH of MPBNs for cesium ion adsorption was 5~9, the adsorption equilibrium time was 60 min, and the maximum adsorption capacity was 17.03 mg/g. In addition, MPBNs were separated rapidly by an external magnetic field, and the adsorption process was an endothermic reaction. The adsorption isotherm and kinetics of MPBNs were in accordance with the Freundlich model and quasi-second-order fitting model, respectively, and the adsorption process of MPBNs was controlled by the diffusion step in particles. Notably, these MPBNs could be effectively separated from water by a magnetic field, facilitating engineering applications in cesium-containing wastewater.

Copolymerization of anthranilic acid and o-phenylenediamine by a free radical in the presence of nanoparticles of copper hexacyanoferrates for the removal of cesium ions in aqueous solutions

Core–shell nanocomposite of copper hexacyanoferrate copolymer of anthranilic acid with o-phenylenediamine (CHCF-poly-AA-co-OPD)) was synthesized and used as ion exchanger for the removal of cesium ions from wastewater. The nanocomposite was prepared by implantation of CHCF nanoparticles into the copolymer of poly(AA-co-OPD) during the polymerization process. By transmission electron microscope, scanning electron microscope and Brunauer–Emmett–Teller, the surface morphology and the porous structure were investigated. The physicochemical characterization of the prepared core–shell nanocomposite was carried out by FT-IR spectroscopy, XRD and thermogravimetric analysis. As a function in pH, metal ion concentration, shaking time and temperature, the capacity of the CSNC toward cesium ions and the behaviors of the process were studied. The results illustrated that the maximum capacity was recorded 1.35 mmol g−1 at pH 11, 10 mmol L−1 Cs+ and 25 °C. Also, Langmuir, Freundlich, Temkin and Dubinin–Radushkevich (D–R) isotherms models were studied, in which the data were well fitted with Langmuir model, suggesting that the uptake of Cs+ was monolayer and homogeneous. Also, the adsorption kinetics data were fitted well to pseudo-second-order model. Thermodynamic parameters were calculated in the temperature from 25 to 60 °C, and the data revealed that Cs+ sorption was endothermic, spontaneous and more favorable at higher temperature. Up to 92% desorption of Cs+ was completed with 2 M KCl.

Selective and effective adsorption of cesium ions by metal hexacyanoferrates (MHCF, M = Cu, Co, Ni) modified chitosan fibrous biosorbent

Selective and effective adsorptive removal of radiocesium is of great importance in terms of nuclear waste management and environmental remediation, but is still challenging because of its radioactive and non-complexing nature. Herein, metal hexacyanoferrates (MHCF, M = Cu, Co, or Ni) modified fibrous chitosan was prepared by multiple sequential adsorption and self-assembly approach, and applied for the selective and effective adsorption of Cs⁺. The physically supported MHCF in chitosan fibers showed good crystallinity and stability, and the obtained fibrous composite has high specific surface area (18.2-29.4 m² g^-1). Moreover, MHCF crystals endowed the fibrous chitosan-based adsorbent with a high adsorption capacity and selectivity towards Cs⁺. Its adsorption kinetic and isotherm performance followed the pseudo second-order model and the Sips model. The q_m value of three fibrous MHCF/chitosan (M = Cu, Co, or Ni) composites was 24.9-70.3 mg g^-1. The fibrous CuHCF/chitosan composite had the highest q_m among the three composites. In summary, the modified chitosan can selectively and effectively remove Cs⁺ from complicated aqueous solutions.

Core–shell polymer nanocomposite based on free radical copolymerization of anthranilic acid and o-amino phenol in the presence of copper hexacyanoferrates nanoparticles and its adsorption properties

Core–shell polymer nanocomposite (CSNC) of copper hexacyanoferrate-copolymer of anthranilic acid with o-aminophenol (CHCF-poly(AA-co-OAP)) was synthesized and used as ion exchanger for the sorption of cesium ions from aqueous solution. The nanocomposite was prepared by implantation of CHCF nanoparticles into copolymer of poly(AA-co-OAP) during the polymerization process. The surface morphology and the porous structure were investigated through transmission electron microscope (TEM), scanning electron microscope (SEM) and Brunauer–Emmett–Teller (BET). The characterization of the prepared (CSNC) was carried out by Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD) and Thermogravimetric (TGA). Which SEM and TEM images confirmed the nano-size of the prepared CSNC. The values of adsorption capacity of CSNC towards cesium ions and the factors influence on the removal of cesium from solutions were investigated as function in pH, metal ion concentration, temperature and contact time. The results illustrated that the highest value of sorption capacity of the prepared CSNC towards Cs+ ions was 2.1 mmol g−1 at pH 11, 10 mmol L−1 Cs+ and 25 °C. Four modeling include on Langmuir, Freundlich, Temkin and Dubinin-Radushkevich (D-R) isotherms models were studied. According to the obtained data, Langmuir model considered the most suitable model, which suggest that the uptake of Cs+ was monolayer and homogeneous. Also, the adsorption kinetics data was fitted well to pseudo-second-order model. Thermodynamic parameters were calculated in the temperature from 25 to 60 °C and the data revealed that Cs+ sorption was endothermic, spontaneous, and more favorable at higher temperature. Up to 92% desorption of Cs+ was completed with 2 M KCl.