Adsorption of thorium(IV) from aqueous solutions by poly(cyclotriphosphazene-co-4,4′-diaminodiphenyl ether) microspheres

Synthesis of ion exchange film based on chemical grafting of styrene onto polyethylene/EPDM rubber blend for thorium removal

Chemical grafting of low-density polyethylene film blended with ethylene propylene diene monomer rubber (PE/EPDM) using styrene monomer followed by a sulfonation process was investigated. Different factors affecting the grafting process, such as monomer and initiator concentrations, time of reaction, and grafting temperature, were studied. Sulfonation of the grafted films was carried out using chlorosulfonic acid in dichloromethane. Characterization of the grafted and sulfonated films was performed using ATR-FTIR, SEM, TGA, and XRD instruments. The grafting was successfully performed in aqueous media using sodium bisulfite as initiator, reaching a grafting yield of 130% and an ion exchange capacity of 1.2 meq/g. The removal of thorium ions from aqueous solution was studied using the obtained ion exchange films. The results showed that the maximum adsorption capacity of Th(IV) was 177.5 mg. g-1 (pH = 3, 298 K and 60 min). Removal isotherm and Kinetics were investigated, and the results revealed that the adsorption process was chemisorption homogeneous monolayer adsorption, exothermic, and spontaneous.

Cyclotriphosphazene: A Versatile Building Block for Diverse Functional Materials

Cyclotriphosphazene (CP) is a cyclic inorganic compound with the chemical formula N3P3. This unique molecule consists of a six-membered ring composed of alternating nitrogen and phosphorus atoms, each bonded to two chlorine atoms. CP exhibits remarkable versatility and significance in the realm of materials chemistry due to its easy functionalization via facile nucleophilic substitution reactions in mild conditions as well as intriguing properties of resultant final CP-based molecules or polymers. CP has been served as an important building block for numerous functional materials. This review provides a general and broad overview of the synthesis of CP-based small molecules through nucleophilic substitution of hexachlorocyclotriphosphazene (HCCP), and their applications, including flame retardants, liquid crystals (LC), chemosensors, electronics, biomedical materials, and lubricants, have been summarized and discussed. It would be expected that this review would offer a timely summary of various CP-based materials and hence give an insight into further exploration of CP-based molecules in the future.

Eco-friendly and cost-effective adsorbent derived from blast furnace slag with black liquor waste for hazardous remediation

The current investigation concerns with preparation eco-friendly and cost-effective adsorbent (mesoporous silica nanoparticles (SBL)) based on black liquor (BL) containing lignin derived from sugarcane bagasse and combining it with sodium silicate derived from blast furnace slag (BFS) for thorium adsorption. Thorium ions were adsorbed from an aqueous solution using the synthesized bio-sorbent (SBL), which was then assessed by X-ray diffraction, BET surface area analysis, scanning electron microscopy with energy dispersive X-ray spectroscopy (EDX), and Fourier transforms infrared spectroscopy (FTIR). Th(IV) sorption properties, including the pH effect, uptake rate, and sorption isotherms across various temperatures were investigated. The maximum sorption capacity of Th(IV) on SBL is 158.88 mg/L at pH value of 4328 K, and 60 min contact time. We demonstrated that the adsorption processes comport well with pseudo-second-order and Langmuir adsorption models considering the kinetics and equilibrium data. According to thermodynamic inspections results, the Th(IV) adsorption process exhibited endothermic and random behavior suggested by positive ΔH° and ΔS° values, while the negative ΔG° values indicated a spontaneous sorption process. The maximum Th(IV) desorption from the loaded SBL (Th/SBL) was carried out at 0.25 M of NaHCO3 and 60 min of contact. Sorption/desorption processes have five successive cycles. Finally, this study suggests that the recycling of BFS and BL can be exploited for the procurement of a promising Th(IV) adsorbents.

Preparation and adsorption properties of hyperbranched polyethyleneimine-cellulose nanofiber aerogel

A novel cellulose-based aerogel was prepared by a chemical cross-linking reaction and hydrogen bonding between cellulose nanofibers (CNF), polyethylene glycol diglycidyl ether (PEGDE), and hyperbranched polyethyleneimine (HPEI).