Kinetic Analysis on the Skin Disposition of Cytotoxicity as an Index of Skin Irritation Produced by Cetylpyridinium Chloride: Comparison of In Vitro Data using a Three-Dimensional Cultured Human Skin Model with In Vivo Results in Hairless Mice

A strong, silk protein-inspired tissue adhesive with an enhanced drug release mechanism for transdermal drug delivery

In transdermal drug delivery system (TDDS) patches, achieving prolonged adhesion, high drug loading, and rapid drug release simultaneously presented a significant challenge. In this study, a PHT-SP-Cu2+ adhesive was synthesized using polyethylene glycol (PEG), hexamethylene diisocyanate (HDI), trimethylolpropane (TMP), and silk protein (SP) as functional monomers which were combined with Cu2+ to improve the adhesion, drug loading, and drug release of the patch. The structure of the adhesion chains and the formation of Cu2+-p-π conjugated network in PHT-SP-Cu2+ were characterized and elucidated using different characterization methods including FT-IR, 13C NMR, XPS, SEM imaging and thermodynamic evaluation. The formulation of pressure-sensitive adhesive (PSA) was optimized through comprehensive research on adhesion, mechanics, rheology, and surface energy. The formulation of 3 wt.% SP and 3 wt.% Cu2+ provided superior adhesion properties compared to commercial standards. Subsequently, the peel strength of PHT-SP-Cu2+ was 7.6 times higher than that of the commercially available adhesive DURO-TAK® 87-4098 in the porcine skin peel test. The adhesion test on human skin confirmed that PHT-SP-Cu2+ could adhere to the human body for more than six days. Moreover, the drug loading, in vitro release test and skin permeation test were investigated using ketoprofen as a model drug, and the results showed that PHT-SP-Cu2+ had the efficacy of improving drug compatibility, promoting drug release and enhancing skin permeation as a TDDS. Among them, the drug loading of PHT-SP-Cu2+ was increased by 6.25-fold compared with PHT, and in the in vivo pharmacokinetic analysis, the AUC was similarly increased by 19.22-fold. The mechanism of α-helix facilitated drug release was demonstrated by Flori-Hawkins interaction parameters, molecular dynamics simulations and FT-IR. Biosafety evaluations highlighted the superior skin cytocompatibility and safety of PHT-SP-Cu2+ for transdermal applications. These results would contribute to the development of TDDS patch adhesives with outstanding adhesion, drug loading and release efficiency. STATEMENT OF SIGNIFICANCE: A new adhesive, PHT-SP-Cu2+, was created for transdermal drug delivery patches. Polyethylene glycol, hexamethylene diisocyanate, trimethylolpropane, silk protein, and Cu2+ were used in synthesis. Characterization techniques confirmed the structure and Cu2+-p-π conjugated networks. Optimal formulation included 3 wt.% SP and 3 wt.% Cu2+, exhibiting superior adhesion. PHT-SP-Cu2+ showed 7.6 times higher peel strength than DURO-TAK® 87-4098 on porcine skin and adhered to human skin for over six days. It demonstrated a 6.25-fold increase in drug loading compared to PHT, with 19.22-fold higher AUC in vivo studies. α-helix facilitated drug release, proven by various analyses. PHT-SP-Cu2+ showed excellent cytocompatibility and safety for transdermal applications. This study contributes to developing efficient TDDS patches.

A Rhamnose-PEG-Modified Dendritic Polymer for Long-Term Efficient Transdermal Drug Delivery

This study introduces a dendronized pressure-sensitive adhesive, TMPE@Rha, addressing Food and Drug Administration (FDA) concerns about traditional pressure-sensitive adhesives (PSAs) in transdermal drug delivery systems. The unique formulation, composed of rhamnose, trihydroxypropane, and poly(ethylene glycol), significantly enhances cohesion and tissue adhesion. Leveraging rhamnose improves intermolecular interactions and surface chain mobility, boosting tissue adhesion. Compared to acrylic pressure-sensitive adhesive 87-DT-4098, TMPE@Rha shows substantial advantages, with up to 5 to 6 times higher peel strength on porcine and wood substrates. Importantly, it maintains strong human skin adhesion beyond 7 days without the typical "dark ring" phenomenon. When loaded with diclofenac, the adhesive exhibits 3.12 times greater peeling strength than commercial alternatives, sustaining human adhesion for up to 6 days. Rigorous analyses confirm rhamnose's role in increasing interaction strength. In vitro studies and microscopy demonstrate the polymer's ability to enhance drug loading and distribution on the skin, improving permeability. Biocompatibility tests affirm TMPE@Rha as nonirritating. In summary, TMPE@Rha establishes a new standard for PSAs in transdermal drug delivery systems, offering exceptional adhesion, robustness, and biocompatibility. This pioneering work provides a blueprint for next-generation, highly adhesive, drug-loaded PSAs that meet and exceed FDA criteria.

Effect of Commercial Children's Mouthrinses and Toothpastes on the Viability of Neonatal Human Melanocytes: An In Vitro Study

In this study, we examined the cytotoxic effects of six commercial children's mouthrinses (designated as #1, #2, #3, #4, #5, and #6) and four commercial children's toothpastes (designated as #1, #2, #3, and #4) on primary human neonatal melanocytes that were used as a representative model for oral melanocytes. Mouthrinses diluted directly with culture medium (1:2, 1:5, 1:10, 1:100, and 1:1000) were added to monolayers of melanocytes for 2 min, followed by 24 h recovery, after which MTS cytotoxicity assay was conducted. The extracts of each toothpaste were prepared (50% w/v), diluted in culture medium (1:2, 1:5, 1:10, 1:50, 1:100, and 1:1000), and added to cell monolayers for 2 min (standard brushing time), followed by an analysis of cell viability after 24 h. Results showed that all mouthrinses except mouthrinse #4 showed significantly greater loss of cell viability, ascribed to cetylpyridinium chloride (CPC) that induced significant cytotoxicity to melanocytes (IC50 = 54.33 µM). In the case of toothpastes, the examination of cellular morphology showed that a 2 min exposure to all toothpaste extracts induced a concentration-dependent decline in cell viability, pronounced in toothpaste containing sodium lauryl sulfate (SLS) detergent. Further results suggested SLS to be the critical driver of cytotoxicity (IC50 = 317.73 µM). It is noteworthy that toothpaste #1 exhibited much lower levels of cytotoxicity compared to the other three toothpastes containing SLS. Taken together, these findings suggest that the melanocytotoxicity of children's mouthrinse (#4) and toothpaste (#1) is comparatively low. To the best of our knowledge, this is the first study to examine the impact of children's toothpastes and mouthrinses on neonatal primary human melanocytes. Future studies to investigate these findings in a realistic scenario replicating oral cavity conditions of the presence of microbiota, pellicle layer and saliva, and other cell types are warranted.

Fe(III)-coordinated N-[tris(hydroxymethyl)methyl]acrylamide-modified acrylic pressure-sensitive adhesives with enhanced adhesion and cohesion for efficient transdermal application

Pressure-sensitive adhesives are critical to the product's safety, efficacy, and quality in transdermal drug delivery systems. However, many defects of transdermal patches (e.g., insufficient adhesion, patch displacement, and "dark ring" phenomenon) remain. Herein, the N-[tris(hydroxymethyl)methyl]acrylamide (NAT)-modified acrylic pressure-sensitive adhesive coordinated with Fe(III) (AA-NAT/Fe³⁺) was creatively proposed. Results demonstrated that the adhesiveness and cohesiveness of the optimized AA-NAT/Fe³⁺ were higher by 1.8- and 9.7-fold, respectively, than those of commercially available DURO-TAK® 87-4098 due to the hydrogen bonding interaction of NAT-skin interface and coordination of NAT-Fe³⁺. Moreover, compared with that of DURO-TAK® 87-4098, the adhesion time of AA-NAT/Fe³⁺ on the human forearm was remarkably prolonged, and no "dark ring" phenomenon was observed for AA-NAT/Fe³⁺ after removal. After clonidine (CLO) was loaded into AA-NAT/Fe³⁺, controlled drug release and a drug transdermal behavior were endowed for CLO@AA-NAT/Fe³⁺in vitro and in vivo. AA-NAT/Fe³⁺ still maintained superiority in adhesion and cohesion properties after CLO loading. These observations would contribute to the development of pressure-sensitive adhesives with outstanding adhesion and cohesion for transdermal patches. STATEMENT OF SIGNIFICANCE: This N-[tris(hydroxymethyl)methyl]acrylamide-modified acrylic pressure-sensitive adhesive coordinated with Fe(III) has enhanced adhesion and cohesion properties, which provide a simple but effective strategy to solve the problems (e.g., insufficient adhesion, patch displacement, and "dark ring" phenomenon) in existing transdermal patches.

Efficacy and safety of permeation enhancers: a kinetic evaluation approach and molecular mechanism study in the skin

This study sought to provide approach for evaluating and predicting the efficacy and safety of permeation enhancers on the basis of their kinetic distribution behavior in the skin dictated by physicochemical properties. Herein, the efficacy-safety regularity of eight permeation enhancers were studied with ex vivo skin permeation study, small-angle X-ray scattering, MTT assay, H&E staining, and in vivo skin erythema analysis, classifying into the following three categories: high enhancement-low irritation, medium enhancement-high irritation, and low enhancement-low irritation. These three modes were positively correlated with the distribution amount of permeation enhancers in the skin layers and verified by the in vitro tape-stripping study. The kinetic parameter, effective-safety index (I_ES), was proposed to describe the regularity of enhancement effect tendency and irritation risk, and the relationship between I_ES and physicochemical properties of permeation enhancers was analyzed with multiple regression analysis. According to the results of modulated temperature differential scanning calorimetry and dielectric spectrum, permeation enhancers with high lipophilicity and low polarity had I_ES > 1, suggesting high enhancement effect and low irritation due to their higher affinity with the stratum corneum (SC) than with epidermis (EP). Permeation enhancers with medium lipophilicity and medium polarity exhibited 0 <I_ES ≤ 1, showing medium enhancement effect and high irritation, as determined by their comparable affinity with the SC and epidermis (EP). However, permeation enhancers with low lipophilicity and high polarity had I_ES → 0, demonstrating low enhancement effect and irritation, as indicated by their poor affinity with the SC. In summary, different physicochemical properties of permeation enhancers influenced their affinities with skin layers, resulting in their different enhancement effect and irritation potential. This study will provide a theoretical basis and criteria for evaluating and predicting the safety and efficacy of permeation enhancers, which will enable a more rational selection of permeation enhancers in the optimization of transdermal patches.

Antimicrobial adhesive polyurethane gel sheet with cetylpyridinium chloride-montmorillonite for facial and somato prosthesis fastening

PURPOSE

Existing options for attaching facial and somato prostheses, such as skin adhesives, are problematic because of microbial colonization and skin irritation. This study aims to evaluate the suitability of adhesive polyurethane gel sheets containing cetylpyridinium chloride (CPC)-montmorillonite (Mont) for prosthesis fastening.

METHODS

Adhesive gel sheets were fabricated as mixtures of base resin (99.6 wt% polyol) and hardening agent at a ratio of 3:1 with 0 (control), 2, 5, 10, or 15 wt% CPC-Mont. The controlled release of CPC, antimicrobial activity, in vitro skin irritation, and adhesive force against silicone and human skin at different blending ratios were determined. Statistical analyses of the data were performed using one-way analysis of variance (ANOVA), analysis of covariance (ANCOVA), Tukey's test, or single regression analysis, as appropriate.

RESULTS

The amount of CPC released increased with the CPC-Mont blending ratio and was linearly proportional to the surface occupation area ratio of CPC-Mont. The samples with >5 wt% CPC-Mont exhibited antimicrobial activity against Staphylococcus aureus at an exposure time of 0 d, and samples with >2 wt% CPC-Mont exhibited antimicrobial activity against Candida albicans at an exposure time of 1 d. All samples were classified as non-irritant based on an in vitro skin irritation test. The adhesive force on the silicone material and human skin decreased with increasing CPC-Mont blending ratio.

CONCLUSION

Samples with 5 wt% CPC-Mont are potential candidates as antimicrobial adhesive polyurethane gel sheets for fastening facial and somato prostheses.

Anti-Inflammatory and Protective Effects of Juncus effusus L. Water Extract on Oral Keratinocytes

Periodontitis is a chronic inflammatory disease caused by periodontopathogenic bacteria that form biofilms in periodontal pockets. The gingival epithelium acts as the first physical barrier in fighting attacks by periodontopathogenic pathogens, such as the primary etiological agent Porphyromonas gingivalis, and various exogenous chemicals, as well as regulates the local innate immune responses. Therefore, the development of novel oral care products to inhibit inflammatory reactions caused by bacterial infection and protect the gingival epithelium is necessary. Juncus effusus L. has generally been used as an indigenous medicine, such as a diuretic, an antipyretic, and an analgesic, in ancient practice. In this study, we examined the effects of a water extract from J. effusus L. on the inhibition of the inflammatory reaction elicited by bacterial infection and protection of the oral epithelium by chemical irritation. Pretreatment of oral epithelial cells with the water extract from J. effusus L. significantly reduced P. gingivalis or its lipopolysaccharide- (LPS-) mediated production of chemokines (interleukin-8 and C-C-chemokine ligand20) in a concentration-dependent manner with comparable to or greater effects than epigallocatechin gallate and protected oral epithelial cells from injury by chemical irritants, cetylpyridinium chloride, and benzethonium chloride. Moreover, the water extract from J. effusus L. in the presence of antimicrobial agents or antifibrinolytics already used as ingredients in mouthwash could significantly reduce the production of chemokines from P. gingivalis LPS-stimulated oral epithelial cells in a concentration-dependent manner. These findings suggest that the water extract from J. effusus L. is potentially useful for oral care to prevent oral infections, such as periodontal infections, and maintain oral epithelial function.

Cetylpyridinium chloride inhibits human breast tumor cells growth in a no-selective way

OBJECTIVE

Analyze the antitumor capacity of cetylpyridinium chloride (CPC) on human breast tumor cells, and the possible action mechanism.

MATERIAL AND METHODS

The human breast tumor cells MCF-7 and no-tumor breast cells MCF-10A were exposed to CPC under various condition (concentration and duration). Cell viability was measured with MTT assay, the LIVE/DEAD assay, and fluorescence microscopy. Membrane permeability after CPC exposure was evaluated by Calcein AM assay, mitochondrial morphology with a MitoView staining, and genotoxicity with the comet assay and fluorescence microscopy.

RESULTS

CPC was cytotoxic to both MCF-7 and MCF-10A as of a 24-h exposure to 0.1 µM. Cytotoxicity was dose-dependent and reached 91% for MCF-7 and 78% for MCF-10A after a 24-h exposure to 100 µM CPC, which outperformed the positive control doxorubicin in effectiveness and selectivity. The LD50 of CPC on was 6 µM for MCF-7 and 8 µM for MCF-10A, yielding a selectivity index of 1.41. A time response analysis revealed 64% dead cells after only 5 min of exposure to 100 µM CPC. With respect to the action mechanisms, the comet assay did not reveal genome fragmentation. On the other hand, membrane damage was dose-dependent and may also affect mitochondrial morphology.

CONCLUSION

Cetylpyridinium chloride inhibits MCF-7 cell growing in a non-selective way as of 5 min of exposure. The action mechanism of CPC on tumor cells involves cell membrane damage without change neither mitochondrial morphology nor genotoxicity.

Novel Bis-Ammonium Salts of Pyridoxine: Synthesis and Antimicrobial Properties

A series of 108 novel quaternary bis-ammonium pyridoxine derivatives carrying various substituents at the quaternary nitrogen’s and acetal carbon was synthesized. Thirteen compounds exhibited antibacterial and antifungal activity (minimum inhibitory concentration (MIC) 0.25–16 µg/mL) comparable or superior than miramistin, benzalkonium chloride, and chlorhexidine. A strong correlation between the lipophilicity and antibacterial activity was found. The most active compounds had logP values in the range of 1–3, while compounds with logP > 6 and logP < 0 were almost inactive. All active compounds demonstrated cytotoxicity comparable with miramistin and chlorhexidine on HEK-293 cells and were three-fold less toxic when compared to benzalkonium chloride. The antibacterial activity of leading compound 5c₁₂ on biofilm-embedded Staphylococcus aureus, Staphylococcus epidermidis, Escherichia coli or Pseudomonas aeruginosa was comparable or even higher than that of the benzalkonium chloride. In vivo 5c₁₂ was considerably less toxic (LD₅₀ 1705 mg/kg) than benzalkonium chloride, miramistine, and chlorhexidine at oral administration on CD-1 mice. An aqueous solution of 5c₁₂ (0.2%) was shown to be comparable to reference drugs efficiency on the rat’s skin model. The molecular target of 5c₁₂ seems to be a cellular membrane as other quaternary ammonium salts. The obtained results make the described quaternary bis-ammonium pyridoxine derivatives promising and lead molecules in the development of the new antiseptics with a broad spectrum of antimicrobial activity.

Rechargeable anti-microbial adhesive formulation containing cetylpyridinium chloride montmorillonite

Long-term anti-bacterial effect is a desired ability of any dental material in combating tooth caries as one of the most common and widespread persistent diseases today. Among several cationic quaternary ammonium compounds with antiseptic properties, cetylpyridinium chloride (CPC) is often used in mouthrinses and toothpastes. In this study, we incorporated CPC in a soft phyllosilicate mineral (clay), referred to as montmorillonite (Mont), to enable gradual CPC release with rechargeability. Besides measuring CPC release and recharge, we examined the anti-bacterial effect, cytotoxicity and bonding effectiveness of five experimental adhesive formulations, prepared by adding 1 and 3 wt% CPC_Mont, 3 wt% Mont (without CPC), and 1 and 3 wt% CPC (without Mont) to the commercial adhesive Clearfil S³ Bond ND Quick ('C-S³B'; Kuraray Noritake). Strong inhibition of Streptococcus mutans biofilm formation by CPC_Mont adhesives was confirmed by optical density and SEM. CPC release from CPC_Mont adhesives was higher and lasted longer than from CPC adhesives, while CPC_Mont adhesives could also be recharged with CPC upon immersion in 2 wt% CPC. In conclusion, CPC_Mont technology rendered adhesives anti-bacterial properties with recharge ability, this without reducing its bonding potential, neither increasing its cytotoxicity. STATEMENT OF SIGNIFICANCE: Dental caries is one of the most prevalent chronic diseases in the population worldwide and is the major cause of tooth loss. In this study, we developed cetylpyridinium chloride (CPC) loaded montmorillonite (CPC-Mont) with a long-term antibacterial efficacy to prevent caries. CPC is an antibacterial agent approved by FDA, used as an OTC drug and contained in oral hygiene aids. CPC-Mont was incorporated in a dental adhesive to gradually release CPC. CPC_Mont technology rendered adhesives anti-bacterial properties with rechargeability, this without reducing its bonding potential, neither increasing its cytotoxicity.

Synergistic Anti-MRSA Activity of Cationic Nanostructured Lipid Carriers in Combination With Oxacillin for Cutaneous Application

Nanoparticles have become a focus of interest due to their ability as antibacterial agents. The aim of this study was to evaluate the anti-methicillin-resistant Staphylococcus aureus (MRSA) activity of cationic nanostructured lipid carriers (NLC) combined with oxacillin against ATCC 33591 and clinical isolate. The cationic resource on the NLC surface was soyaethyl morpholinium ethosulfate (SME). NLC loaded with oxacillin was produced to assess the antibacterial activity and the effectiveness of topical application for treating cutaneous infection. The hydrodynamic diameter and zeta potential of oxacillin-loaded NLC were 177 nm and 19 mV, respectively. When combined with NLC, oxacillin exhibited synergistic MRSA eradication. After NLC encapsulation, the minimum bactericidal concentration (MBC) of oxacillin decreased from 250 to 62.5 μg/ml. The combined NLC and oxacillin reduced the MRSA biofilm thickness from 31.2 to 13.0 μm, which was lower than the effect of NLC (18.2 μm) and antibiotic (25.2 μm) alone. The oxacillin-loaded NLC showed significant reduction in the burden of intracellular MRSA in differentiated THP-1 cells. This reduction was greater than that achieved with individual treatment. The mechanistic study demonstrated the ability of cationic NLC to disrupt the bacterial membrane, leading to protein leakage. The cell surface disintegration also increased oxacillin delivery into the cytoplasm, activating the bactericidal process. Topical NLC treatment of MRSA abscess in the skin decreased the bacterial load by log 4 and improved the skin’s architecture and barrier function. Our results demonstrated that a combination of nanocarriers and an antibiotic could synergistically inhibit MRSA growth.

Antimicrobial activity of topically-applied soyaethyl morpholinium ethosulfate micelles against Staphylococcus species

Aim: Here we evaluated the antibacterial efficacy of soyaethyl morpholinium ethosulfate (SME) micelles as an inherent bactericide against Staphylococcus aureus and methicillin-resistant S. aureus (MRSA). Methodology: The antimicrobial activity was examined by in vitro culture model and murine model of skin infection. Cationic micelles formed by benzalkonium chloride or cetylpyridinium chloride were used for comparison. Results: The minimum inhibitory concentration and minimum bactericidal concentration against S. aureus and MRSA were 1.71–3.42 and 1.71–6.84 μg/ml, respectively. Topical administration of SME micelles significantly decreased the cutaneous infection and MRSA load in mice. The killing of bacteria was caused by direct cell wall/membrane rupture. SME micelles also penetrated into the bacteria to elicit a Fenton reaction and oxidative stress. Conclusion: SME micelles have potential as antimicrobial agents due to their lethal effect against S. aureus and MRSA with a low toxicity to mammalian cells.

Antitumor Activity of Ionic Liquids Based on Ampicillin

Significant antiproliferative effects against various tumor cell lines were observed with novel ampicillin salts as ionic liquids. The combination of anionic ampicillin with appropriate ammonium, imidazolium, phosphonium, and pyridinium cations yielded active pharmaceutical ingredient ionic liquids (API-ILs) that show potent antiproliferative activities against five different human cancer cell lines: T47D (breast), PC3 (prostate), HepG2 (liver), MG63 (osteosarcoma), and RKO (colon). Some API-ILs showed IC50 values between 5 and 42 nM, activities that stand in dramatic contrast to the negligible cytotoxic activity level shown by the ampicillin sodium salt. Moreover, very low cytotoxicity against two primary cell lines-skin (SF) and gingival fibroblasts (GF)-indicates that the majority of these API-ILs are nontoxic to normal human cell lines. The most promising combination of antitumor activity and low toxicity toward healthy cells was observed for the 1-hydroxyethyl-3-methylimidazolium-ampicillin pair ([C2 OHMIM][Amp]), making this the most suitable lead API-IL for future studies.

Anti-inflammatory and protective effects of 2-methacryloyloxyethyl phosphorylcholine polymer on oral epithelial cells

Periodontitis is a chronic inflammatory disease initiated by a microbial biofilm formed in the periodontal pocket. Gingival epithelium plays important roles as the first physical barrier to bacterial invasion and in orchestrating the innate immune reaction via toll-like receptors (TLRs), which recognize various bacterial products, and maintaining its function. Newly developed oral care products to inhibit bacterial adherence, subsequent inflammatory reaction and protect the gingival epithelium are expected. We previously reported that 2-methacryloyloxyethyl phosphorylcholine (MPC)-polymer coating decreased bacterial adhesion to human oral keratinocytes, RT-7, and mouth-rinsing with MPC-polymer inhibited the increase of oral bacteria. In this study, regarding the possibility of MPC-polymer application for preventing the adherence of periodontal pathogen, subsequent inflammatory reaction and protection of gingival epithelium, we examined the effects of MPC-polymer on the adherence of Porphyromonas gingivalis, major periodontitis-related pathogen, and TLR2 ligand to RT-7 and subsequent interleukin (IL)-8 production. MPC-polymer treatment significantly reduced P. gingivalis adherence by 44% and TLR2-mediated IL-8 production by blocking the binding of its specific-ligand in a concentration-dependent manner. Furthermore, MPC-polymer pretreatment protected RT-7 from injury by chemical irritants, cetylpyridinium chloride. These findings suggest that MPC-polymer is potentially useful for oral care to prevent oral infection and to maintain oral epithelial function.

Mathematical model to predict skin concentration after topical application of drugs

Skin permeation experiments have been broadly done since 1970s to 1980s as an evaluation method for transdermal drug delivery systems. In topically applied drug and cosmetic formulations, skin concentration of chemical compounds is more important than their skin permeations, because primary target site of the chemical compounds is skin surface or skin tissues. Furthermore, the direct pharmacological reaction of a metabolically stable drug that binds with specific receptors of known expression levels in an organ can be determined by Hill's equation. Nevertheless, little investigation was carried out on the test method of skin concentration after topically application of chemical compounds. Recently we investigated an estimating method of skin concentration of the chemical compounds from their skin permeation profiles. In the study, we took care of "3Rs" issues for animal experiments. We have proposed an equation which was capable to estimate animal skin concentration from permeation profile through the artificial membrane (silicone membrane) and animal skin. This new approach may allow the skin concentration of a drug to be predicted using Fick's second law of diffusion. The silicone membrane was found to be useful as an alternative membrane to animal skin for predicting skin concentration of chemical compounds, because an extremely excellent extrapolation to animal skin concentration was attained by calculation using the silicone membrane permeation data. In this chapter, we aimed to establish an accurate and convenient method for predicting the concentration profiles of drugs in the skin based on the skin permeation parameters of topically active drugs derived from steady-state skin permeation experiments.

Long-term survival of salivary streptococci on dental devices made of ethylene vinyl acetate

Bacterial infection associated with the use of medical or dental devices is a serious concern. Although devices made of ethylene vinyl acetate (EVA) are often used in the oral cavity, there are no established standards for their storage. We investigated bacterial survival on EVA sheets under various storage conditions to establish a standard for hygienic storage of such dental devices. Bacterial counts were evaluated, which showed a significant decrease after washing with sterilized water, mechanical brushing and rinsing, and using Mouthguard Cleaner as compared to untreated samples. In addition, no bacteria were detected on samples stored 2 days or longer in a ventilated environment, whereas they were detected for up to 14 days on samples without any cleaning stored in a closed environment. Bacterial counts for the untreated samples gradually declined, while surviving bacteria on samples treated with sterilized water and mechanical brushing showed a rapid decrease. Additionally, bacterial identification using polymerase chain reaction (PCR) revealed that Streptococcus oralis was dominantly detected on salivary samples after 14 days of storage among both two subjects. For effective hygienic storage of dental devices made of EVA, washing with sterilized water is important to remove absorbed salivary compounds along with storage in a ventilated environment.

The potential dermal irritating effect of residual (meth)acrylic monomers in pressure sensitive adhesive tapes

It is generally thought that residual unpolymerized (meth)acrylic monomers commonly found in pressure sensitive adhesive tapes for medical use may cause dermal irritation, but a systematic study has never been carried out. Therefore, we assessed the potential dermal irritating effect of residual (meth)acrylic monomers. We studied seven acrylic monomers, acrylic acid (AA), methyl acrylate (MA), ethyl acrylate (EA), n-butyl acrylate (n-BA), n-hexyl acrylate (n-HA), 2-ethylhexyl acrylate (2-EHA) and 2-hydroxyethyl acrylate (HEA), as well as three methacrylic monomers, methacrylic acid (MAA), methyl methacrylate (MMA) and 2-hydroxyethyl methacrylate (2-HEMA). We first examined their cytotoxic effect on a cultured dermis model using the MTT method to determine their EC(50) and then performed a primary irritation test in rabbits using the monomers at three different concentrations (i.e., EC(50) , one-tenth EC(50) and 10 times EC(50)). Marked variations were found in cytotoxic and dermal irritating activities among the (meth)acrylic monomers tested. HEA exhibited the most potent dermal irritation having the lowest erythema dose (the concentration which gives a primary dermal irritation index of 1.00) of 460 ppm. But the other monomers exhibited less potent dermal irritation (lowest erythema doses > or =1000 ppm). For the monomers, significant correlation was found between cytotoxic activity and in vivo dermal irritating activity. Our results show that residual unpolymerized (meth)acrylic monomers in adhesive tapes are unlikely to induce skin irritation except for HEA. This study also suggests that cultured skin models are extremely useful as a screening method for chemical substances that could potentially cause dermal irritating activity.

Biofunctionalized electrospun silk mats as a topical bioactive dressing for accelerated wound healing

Materials able to deliver topically bioactive molecules represent a new generation of biomaterials. In this article, we describe the use of silk mats, made of electrospun nanoscale silk fibers containing epidermal growth factor (EGF), for the promotion of wound healing processes. In our experiments, we demonstrated that EGF is incorporated into the silk mats and slowly released in a time-dependent manner (25% EGF release in 170h). We tested these materials using a new model of wounded human skin-equivalents displaying the same structure as human skin and able to heal using the same molecular and cellular mechanisms found in vivo. This human three-dimensional model allows us to demonstrate that the biofunctionalized silk mats, when placed on the wounds as a dressing, aid the healing by increasing the time of wound closure by the epidermal tongue by 90%. The preservation of the structure of the mats during the healing period as demonstrated by electronic microscopy, the biological action of the dressing, as well as the biocompatibility of the silk demonstrate that this biomaterial is a new and very promising material for medical applications, especially for patients suffering from chronic wounds.

Pulmonary drug delivery with aerosolizable nanoparticles in an ex vivo lung model

The use of colloidal carrier systems for pulmonary drug delivery is an emerging field of interest in nanomedicine. The objective of this study was to compare the pulmonary absorption and distribution characteristics of the hydrophilic model drug 5(6)-carboxyfluorescein (CF) after aerosolization as solution or entrapped into nanoparticles in an isolated rabbit lung model (IPL). CF-nanoparticles were prepared from a new class of biocompatible, fast degrading, branched polyesters by a modified solvent displacement method. Physicochemical properties, morphology, encapsulation efficiency, in vitro drug release, stability of nanoparticles to nebulization, aerosol characteristics as well as pulmonary dye absorption and distribution profiles after nebulization in an IPL were investigated. CF-nanoparticles were spherical in shape with a mean particle size of 195.3+/-7.1nm, a polydispersity index of 0.225+/-0.017 and a zeta-potential of -28.3+/-0.3mV. Encapsulation efficiencies of CF were as high as about 60% (drug loading of 3% (w/w)); 90% of the entrapped CF were released during the first 50min in vitro. Nanoparticle characteristics were not significantly affected by the aerosolization process utilizing a vibrating mesh nebulizer. After deposition of equal amounts of CF in the IPL, less CF was detected in the perfusate for CF-nanoparticles (plateau concentration 9.2+/-2.4ng/ml) when compared to CF aerosolized from solution (17.7+/-0.8ng/ml). In conclusion, the data suggest that inhalative delivery of biodegradable nanoparticles may be a viable approach for pulmonary drug delivery. Moreover, a targeting effect to the lung tissue is claimed.

Real-time detection of stress in 3D tissue-engineered constructs using NF-kappaB activation in transiently transfected human dermal fibroblast cells

The main objective of this study was to develop a nondestructive reporter system for assessing the response of human cells contained within a three-dimensional (3D) tissue-engineered construct to exogenous stress. Dermal fibroblasts were transiently transfected with a reporter construct linked to nuclear factor kappaB (NF-kappaB) activation which led to expression of a nonstable form of enhanced green fluorescent protein (d2EGFP) after stimulation. This led to a temporary production of fluorescence, which could be readily detected but was not intrinsically toxic, as cells were able to metabolize the initial cycle of d2EGFP produced. This permitted the model to be used for restimulation post recovery. To investigate the performance and predictive ability of this method for assessing cellular response to stress in 3D, we used a range of compounds known to have pro-inflammatory or oxidative properties. Tumor necrosis factor-alpha (TNF-alpha) and interleukin-1-beta (IL-1beta) were selected for having a direct cytokine action; lipopolysaccharide (LPS) was selected for modeling bacterial-mediated inflammation; and hydrogen peroxide was selected as a crude method for delivering an oxidative stress. Transfected cells were stimulated with the above compounds in 3D and the synthesis of d2EGFP was detected as a measure of NF-kappaB activation. The resultant fluorescence was scored using a series of photomicrographs taken by epifluorescence microscopy. All agents activated NF-kappaB when cells were grown in 3D scaffolds but did not cause any significant reduction in cell viability as measured by a standard MTT-ESTA viability test. Parallel NF-kappaB activation and MTT measurements was also conducted in two-dimension (2D) and confirmed findings in 3D. The 3D model described using a fluorescent reporter gene is a highly sensitive and reliable method for detecting cellular stress and represents a key step in developing tissue engineering models with the potential for screening pharmaceutical and cosmetic compounds, as an alternative to existing in vitro and in vivo methods.

In vitro and in vivo comparison of dermal irritancy of jet fuel exposure using EpiDerm (EPI-200) cultured human skin and hairless rats

The purpose of this study was to evaluate an in vitro EpiDerm human skin model (EPI-200) to study the irritation potential of jet fuels (JP-8 and JP-8+100). Parallel in vivo studies on hairless rats on the dermal irritancy of jet fuels were also conducted. Cytokines are an important part of an irritation and inflammatory cascade, which are expressed in upon dermal exposures of irritant chemicals even when there are no obvious visible marks of irritation on the skin. We have chosen two primary cytokines (IL-1alpha and TNF-1alpha) as markers of irritation response of jet fuels. Initially, the EPI-200 was treated with different quantities of JP-8 and JP-8+100 to determine quantities which did not cause significant cytotoxicity, as monitored using the MTT assay and paraffin embedded histological cross-sections. Volumes of 2.5-50 microl/tissue (approximately 4.0-78 microl/cm2) of JP-8 and JP-8+100 showed a dose dependent loss of tissue viability and morphological alterations of the tissue. At a quantity of 1.25 microl/tissue (approximately 2.0 microl/cm2), no significant change in tissue viability or morphology was observed for exposure time extending to 48 h. Nonetheless, this dose induced significant increase in IL-1alpha and TNF-alpha release versus non-treated controls after 24 and 48 h. In addition, IL-1alpha release for JP-8+100 was significantly higher than that observed for JP-8, but TNF-alpha release after 48 h exposure to these two jet fuels was the same. These findings parallel in vivo studies on hairless rats, which indicated higher irritation levels due to JP-8+100 versus JP-8. In vivo, transepidermal water loss (TEWL) and IL-1alpha expression levels followed the order JP-8+100 > JP-8 > control. Further, in vivo TNF-alpha levels for JP-8 and JP-8+100 were also elevated but not significantly different from one another. In aggregate, these findings indicate that EPI-200 tissue model can be utilized as an alternative to the use of animals in evaluating dermal irritation.