Equilibrium, kinetic, and thermodynamic studies on biosorption of Cd(II) from aqueous solution by biochar

Porous Carbons Derived from Desiliconized Rice Husk Char and Their Applications as an Adsorbent in Multivalent Ions Recycling for Spent Battery

Recycling of spent lithium-ion batteries (LIBs) has attracted increasing attentions recently on account of continuous growth demand for corresponding critical metals/materials and environmental requirement of solid waste disposal. In this work, rice husk as one of the most abundant renewable fuel materials in the world was used to prepare rice husk char (RC) and applied to recycle multivalent ions in waste water from hydrometallurgical technology dispose of spent LIBs. Rice husk char with specific surface area and abundant pores was obtained via pickling and desilication process (DPRC). The structural characterization of the obtained rice husk char and its adsorption capacity for multivalent ions in recycled batteries were studied. XRD, TEM, SEM, Raman, and BET were used for the characterization of the raw and the modified samples. The results show rice husk chars after desilication has more flourishing pore structure and larger pore size about 50–60 nm. Meanwhile, after desilication, the particle size of rice husk char decreased to 31.392 μm, and the specific surface area is about 402.10 m2/g. Its nitrogen adsorption desorption curve (BET) conforms to the type IV adsorption isotherm with H3 hysteresis ring, indicating that the prepared rice husk char is a mesoporous material. And the adsorption capacity of optimized DPRC for Ni, Co, and Mn ions is 7.00 mg/g, 4.84 mg/g, and 2.67 mg/g, respectively. It also demonstrated a good fit in the Freundlich model for DPRC-600°C, and a possible adsorption mechanism is proposed. The study indicates biochar materials have great potential as an adsorbent to recover multivalent ions from spent batteries.

The efficiency of potato peel biochar for the adsorption and immobilization of heavy metals in contaminated soil

We investigated the potential application of potato peel biochar (PPB) for the adsorption and immobilization of heavy metals (Cd, Pb, and Ni) in contaminated acidic soil. The addition of PPB to the soil, especially at the application rate of 8%, increased soil pH, cation exchange capacity (CEC), and organic carbon (OC). The maximum adsorption capacity of Cd, Pb, and Ni in the soil amended with PPB at the application rate of 8% was 3215.9, 4418.67, and 3508.51 mg kg^-1, respectively. Compared to the control, the addition of 8% PPB to the soil decreased the soluble and exchangeable fraction of Cd, Pb, and Ni to 84.3, 90.6, and 79.1 mg kg^-1, respectively. In contrast, the addition of 8% PPB to the soil increased the organically-bound and residual fractions of metals in the following order: Pb > Cd > Ni, and Cd > Pb > Ni, respectively. The results of this study showed that potato peel biochar has the potential to stabilize and reduce the bioavailability of heavy metals in contaminated acidic soil. Therefore, potato peel biochar can serve as an eco-friendly, low-cost, and efficient adsorbent to immobilization of heavy metals in contaminated acidic soils.NOVELTY STATEMENTEffect of biochar produced from potato peel on the adsorption of the heavy metals in contaminated acidic soil.Immobilization of heavy metals in contaminated acidic soil amended with potato peel biochar.Improving the chemical properties of soil amended with potato peel biochar.

Single and Competitive Adsorption Behaviors of Cu2+, Pb2+ and Zn2+ on the Biochar and Magnetic Biochar of Pomelo Peel in Aqueous Solution

As an environment-friendly material, biochar has been used to remove heavy metals from wastewater, and the development of cost-effective biochar has been an emerging trend. However, limited studies consider the competitive adsorption of co-existing metals and the separation efficiency of absorbent and solution after adsorption. In this study, pomelo peel was used to prepare biochar (BC) and magnetic biochar (MBC) at different temperatures. Then, the physicochemical properties of the biochars were characterized and the adsorption characteristics of Cu2+, Pb2+, and Zn2+ on the biochars in single, binary, and ternary metal systems were investigated. The results showed that both pyrolysis temperature and magnetization could affect the adsorption capacity of biochar. The adsorption kinetic and thermodynamic processes could be well described by the pseudo-second-order kinetic model and Langmuir model. The adsorption isotherm types of Pb2+ and Zn2+ changed in the binary metal condition. The competitive adsorption order of three heavy metal ions in ternary metal adsorption was Pb2+ > Cu2+ > Zn2+. The MBC of 500 °C showed a good adsorption capacity to Pb2+ in the co-existing environment, and the maximum adsorption capacity was 48.74 mmol g−1. This study also provided technical support for the utilization of pomelo peel and the engineering application of biochar.

Efficient removal of Cd(II) from aqueous solution by pinecone biochar: Sorption performance and governing mechanisms

Cadmium (Cd) is one of the most harmful and widespread environmental pollutants. Despite decades-long research efforts, the remediation of water contaminated by Cd has remained a significant challenge. A novel carbon material, pinecone biochar, was previously hypothesized to be a promising adsorbent for Cd, while so far, it has received little attention. This study evaluated the sorption capacity of pinecone biochar through isotherm experiments. Based on Langmuir model, the adsorption maximum for Cd(II) was up to 92.7 mg g^-1. The mechanism of Cd(II) adsorption on pinecone biochar was also explored through both thermodynamic and kinetics adsorption experiments, as well as both solution and solid-phase microstructure characterization. The solid-solution partitioning behaviour of Cd(II) fitted best with the Tόth model while the adsorption process followed a pseudo-second-order rate, suggesting that the Cd(II) adsorption on the pinecone biochar was mainly a chemisorption process. Microstructure characteristics and mechanism analysis further suggested that coprecipitation and surface complexation were the main mechanisms of Cd adsorption by biochar. Coprecipitation occurred mainly through the forms of Cd(OH)₂ and CdCO₃. Our results demonstrated that pinecone biochar was an efficient adsorbent which holds a huge potential for Cd(II) removal from aqueous solution.

Adsorptive potential of Zea mays tassel activated carbon towards the removal of metformin hydrochloride from pharmaceutical effluent

In the present study, Zea mays tassel which is a zero-value agricultural waste was used to produce a low-cost activated carbon using phosphoric acid as the activating agent. The prepared Z. mays tassel activated carbon (ZMTAC) was characterized by Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD). The adsorbent was applied for adsorption of an emerging contaminant, metformin hydrochloride (MH) from pharmaceutical effluent. The effects of solution pH, contact time, adsorbent dosage, and initial MH concentration and their interactions were investigated using a response surface methodology following a central composite experimental design (CCD). The optimum experimental conditions were as follows: pH 9.5, contact time 67.50 min, dosage 0.5750 g, and MH concentration 152.50 mg/L. The isotherm data followed Langmuir isotherm model (R² = 0.979; sum of square deviation, SSD = 0.321). The saturation adsorption capacity of ZMTAC was 44.84 mg/g at 20 °C. MH adsorption process followed pseudo-second-order kinetics (higher R² and smaller SSD values). The thermodynamic properties obtained showed that the adsorption process was feasible, endothermic and spontaneous. Consequently, the study demonstrated that Z. mays tassel is a potential precursor for preparation of adsorbents for the removal of the MH from pharmaceutical effluent.

Cowpea pod (Vigna unguiculata) biomass as a low-cost biosorbent for removal of Pb(II) ions from aqueous solution

The use of cowpea pod (CPP) biomass for the removal of Pb(II) ions from aqueous solution was investigated. The effects of factors such as dosage concentration (0.2 to 1.6 g L^-1), pH (2 to 8), contact time (5 to 120 min), metal ion concentrations (10 to 80 mg L^-1) and temperature (20 to 50 °C) were examined through batch studies. The biosorption data conformed best to the Langmuir model at the three working temperatures (20, 30 and 40 °C) as revealed by the correlation coefficients (R ²) which were greater than 0.940. The maximum sorption capacity of the CPP for Pb(II) was 32.96 mg g^-1 at 313 K. Furthermore, the kinetic data fitted well to the pseudo-second-order model as it had the lowest sum of square error (SSE) values and correlation coefficients close to unity (R ² > 0.999). The thermodynamic parameters (ΔG°, ΔS° and ΔH°) showed that the biosorption process was spontaneous, feasible and endothermic. The results obtained in the present study indicated that cowpea pod biomass could be used for the effective removal of Pb(II) from aqueous solution.