The promotional effects of cerium on the catalytic properties of Al2O3-supported MnFeOx for NO oxidation and fast SCR reaction

Overview of mechanisms of Fe-based catalysts for the selective catalytic reduction of NOx with NH3 at low temperature

With the increasingly stringent control of NOx emissions, NH3-SCR, one of the most effective de-NOx technologies for removing NOx, has been widely employed to eliminate NOx from automobile exhaust and industrial production. Researchers have favored iron-based catalysts for their low cost, high activity, and excellent de-NOx performance. This paper takes a new perspective to review the research progress of iron-based catalysts. The influence of the chemical form of single iron-based catalysts on their performance was investigated. In the section on composite iron-based catalysts, detailed reviews were conducted on the effects of synergistic interactions between iron and other elements on catalytic performance. Regarding loaded iron-based catalysts, the catalytic performance of iron-based catalysts on different carriers was systematically examined. In the section on iron-based catalysts with novel structures, the effects of the morphology and crystallinity of nanomaterials on catalytic performance were analyzed. Additionally, the reaction mechanism and poisoning mechanism of iron-based catalysts were elucidated. In conclusion, the paper delved into the prospects and future directions of iron-based catalysts, aiming to provide ideas for the development of iron-based catalysts with better application prospects. The comprehensive review underscores the significance of iron-based catalysts in the realm of de-NOx technologies, shedding light on their diverse forms and applications. The hope is that this paper will serve as a valuable resource, guiding future endeavors in the development of advanced iron-based catalysts.

Synergistic Catalytic Performance of Toluene Degradation Based on Non-Thermal Plasma and Mn/Ce-Based Bimetal-Organic Frameworks

A series of Mn/Ce-based bimetal-organic frameworks, recorded as MCDx (x = 1, 2, 4, 6), were prepared by a solvothermal synthesis method to explore their effects and performance in the synergistic catalysis of toluene under the irradiation of non-thermal plasma. The catalytic properties of different manganese loadings in MCDx for degradation of toluene were investigated. The microphysical structures of the material were analyzed by powder X-ray diffraction (PXRD), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA). The results showed that a MCDx coupling with non-thermal plasma can greatly improve the degradation efficiency, the energy efficiency and the CO2 selectivity, and could also significantly reduce the generation of O3 in the by-products. Among the test samples, MCD6 with Mn:Ce = 6:1 (molar ratio) showed the best catalytic performance and stability, exhibited toluene catalytic efficiency 95.2%, CO2 selectivity 84.2% and energy efficiency 5.99 g/kWh, and reduced O3 emission concentration 81.6%. This research provides a reference for the development and application of synergistic catalysis based on bimetal-organic frameworks and non-thermal plasma in the reduction of industrial volatile organic compounds.

LaOx modified MnOx loaded biomass activated carbon and its enhanced performance for simultaneous abatement of NO and Hg0

A battery of agricultural straw derived biomass activated carbons supported LaO_x modified MnO_x (LaMn/BACs) was prepared by a facile impregnation method and then tested for simultaneous abatement of NO and Hg⁰. 15%LaMn/BAC manifested excellent removal efficiency of Hg⁰ (100%) and NO (86.7%) at 180 °C, which also exhibited splendid resistance to SO₂ and H₂O. The interaction between Hg⁰ removal and NO removal was explored; thereinto, Hg⁰ removal had no influence on NO removal, while NO removal preponderated over Hg⁰ removal. The inhibitory effect of NH₃ was greater than the accelerative effect of NO and O₂ on Hg⁰ removal. The physicochemical characterization of related samples was characterized by SEM, XRD, BET, H₂-TPR, NH₃-TPD, and XPS. After incorporating suitable LaO_x into 15%Mn/BAC, the synergistic effect between LaO_x and MnO_x contributed to the improvement of BET surface area and total pore volume, the promotion of redox ability, surface active oxygen species, and acid sites, inhibiting the crystallization of MnO_x. 15%LaMn/BAC has the best catalytic oxidation activity at low temperature. That might be answerable for superior performance and preferable tolerance to SO₂ and H₂O. The results indicated that 15%LaMn/BAC was a promising catalyst for simultaneous abatement of Hg⁰ and NO at low temperature.

Recent advances in selective catalytic oxidation of nitric oxide (NO-SCO) in emissions with excess oxygen: a review on catalysts and mechanisms

Nitric oxides (NO_x, which mainly include more than 90% NO) are one of the major air pollutants leading to a series of environmental problems, such as acid rain, haze, photochemical smog, etc. The selective catalytic oxidation of NO to NO₂ (NO-SCO) is regarded as a key process for the development of selective catalytic reduction of NO_x by ammonia (via fast selective catalytic reduction reaction) and also the simultaneous removal of multipollutant (pre-oxidation and post-absorption). Until now, scholars have developed various types of NO-SCO catalysts, dividing the main groups into noble metals (Pt, Pd, Ru, etc.), metal oxides (Mn-, Co-, Cr-, Ce-based, etc.), perovskite-type oxides (LaMnO₃, LaCoO₃, LaCeCoO₃, etc.), carbon materials (activated carbon, carbon fiber, carbon nanotube, graphene, etc.), and zeolites (ion-exchanged ZSM-5, CHA, SAPO, MCM-41, etc.) in this review. This paper summarizes the recent progress of the above typical catalysts and mostly analyzes the catalytic performance for NO oxidation in terms of the H₂O and/or SO₂ resistances and also the influencing factors, and their reaction mechanisms are described in detail. Finally, this review points out the key problems and possible solutions of the current researches and presents the application prospects and future development directions of NO-SCO technology using the above typical catalysts.

Comprehensive Comparison between Nanocatalysts of Mn−Co/TiO2 and Mn−Fe/TiO2 for NO Catalytic Conversion: An Insight from Nanostructure, Performance, Kinetics, and Thermodynamics

The nanocatalysts of Mn−Co/TiO2 and Mn−Fe/TiO2 were synthesized by hydrothermal method and comprehensively compared from nanostructures, catalytic performance, kinetics, and thermodynamics. The physicochemical properties of the nanocatalysts were analyzed by N2 adsorption, transmission electron microscope (TEM), X-ray diffraction (XRD), H2-temperature-programmed reduction (TPR), NH3-temperature-programmed desorption (TPD), and X-ray photoelectron spectroscopy (XPS). Based on the multiple characterizations performed on Mn−Co/TiO2 and Mn−Fe/TiO2 nanocatalysts, it can be confirmed that the catalytic properties were decidedly dependent on the phase compositions of the nanocatalysts. The Mn−Co/TiO2 sample presented superior structure characteristics than Mn−Fe/TiO2, with the increased surface area, the promoted active components distribution, the diminished crystallinity, and the reduced nanoparticle size. Meanwhile, the Mn4+/Mnn+ ratios in the Mn−Co/TiO2 nanocatalyst were higher than Mn−Fe/TiO2, which further confirmed the better oxidation ability and the larger amount of Lewis acid sites and Bronsted acid sites on the sample surface. Compared to Mn−Fe/TiO2 nanocatalyst, Mn−Co/TiO2 nanocatalyst displayed the preferable catalytic property with higher catalytic activity and stronger selectivity in the temperature range of 75–250 °C. The results of mechanism and kinetic study showed that both Eley-Rideal mechanism and Langmuir-Hinshelwood mechanism reactions contributed to selective catalytic reduction of NO with NH3 (NH3-SCR) over Mn−Fe/TiO2 and Mn−Co/TiO2 nanocatalysts. In this test condition, the NO conversion rate of Mn−Co/TiO2 nanocatalyst was always higher than that of Mn−Fe/TiO2. Furthermore, comparing the reaction between doping transition metal oxides and NH3, the order of temperature−Gibbs free energy under the same reaction temperature is as follows: Co3O4 < CoO < Fe2O3 < Fe3O4, which was exactly consistent with nanostructure characterization and NH3-SCR performance. Meanwhile, the activity difference of MnOx exhibited in reducibility properties and Ellingham Diagrams manifested the promotion effects of cobalt and iron dopings. Generally, it might offer a theoretical method to select superior doping metal oxides for NO conversion by comprehensive comparing the catalytic performance with the insight from nanostructure, catalytic performance, reaction kinetics, and thermodynamics.

High-Efficiency Catalytic Conversion of NOx by the Synergy of Nanocatalyst and Plasma: Effect of Mn-Based Bimetallic Active Species

Three typical Mn-based bimetallic nanocatalysts of Mn−Fe/TiO2, Mn−Co/TiO2, Mn−Ce/TiO2 were synthesized via the hydrothermal method to reveal the synergistic effects of dielectric barrier discharge (DBD) plasma and bimetallic nanocatalysts on NOx catalytic conversion. The plasma-catalyst hybrid catalysis was investigated compared with the catalytic effects of plasma alone and nanocatalyst alone. During the catalytic process of catalyst alone, the catalytic activities of all tested catalysts were lower than 20% at ambient temperature. While in the plasma-catalyst hybrid catalytic process, NOx conversion significantly improved with discharge energy enlarging. The maximum NOx conversion of about 99.5% achieved over Mn−Ce/TiO2 under discharge energy of 15 W·h/m3 at ambient temperature. The reaction temperature had an inhibiting effect on plasma-catalyst hybrid catalysis. Among these three Mn-based bimetallic nanocatalysts, Mn−Ce/TiO2 displayed the optimal catalytic property with higher catalytic activity and superior selectivity in the plasma-catalyst hybrid catalytic process. Furthermore, the physicochemical properties of these three typical Mn-based bimetallic nanocatalysts were analyzed by N2 adsorption, Transmission Electron Microscope (TEM), X-ray diffraction (XRD), H2-temperature-programmed reduction (TPR), NH3-temperature-programmed desorption (TPD), and X-ray photoelectron spectroscopy (XPS). The multiple characterizations demonstrated that the plasma-catalyst hybrid catalytic performance was highly dependent on the phase compositions. Mn−Ce/TiO2 nanocatalyst presented the optimal structure characteristic among all tested samples, with the largest surface area, the minished particle sizes, the reduced crystallinity, and the increased active components distributions. In the meantime, the ratios of Mn4+/(Mn2+ + Mn3+ + Mn4+) in the Mn−Ce/TiO2 sample was the highest, which was beneficial to plasma-catalyst hybrid catalysis. Generally, it was verified that the plasma-catalyst hybrid catalytic process with the Mn-based bimetallic nanocatalysts was an effective approach for high-efficiency catalytic conversion of NOx, especially at ambient temperature.

Structure–Activity Relationship Study of Mn/Fe Ratio Effects on Mn−Fe−Ce−Ox/γ-Al2O3 Nanocatalyst for NO Oxidation and Fast SCR Reaction

A series of Mn−Fe−Ce−Ox/γ-Al2O3 nanocatalysts were synthesized with different Mn/Fe ratios for the catalytic oxidation of NO into NO2 and the catalytic elimination of NOx via fast selective catalytic reduction (SCR) reaction. The effects of Mn/Fe ratio on the physicochemical properties of the samples were analyzed by means of various techniques including N2 adsorption, scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), H2-temperature-programmed reduction (TPR), NH3-temperature-programmed desorption (TPD) and NO-TPD, meanwhile, their catalytic performance was also evaluated and compared. Multiple characterizations revealed that the catalytic performance was highly dependent on the phase composition. The Mn15Fe15−Ce/Al sample with the Mn/Fe molar ratio of 1.0 presented the optimal structure characteristic among all tested samples, with the largest surface area, increased active components distributions, the reduced crystallinity and diminished particle sizes. In the meantime, the ratios of Mn4+/Mnn+, Fe2+/Fen+ and Ce3+/Cen+ in Mn15Fe15−Ce/Al samples were improved, which could enhance the redox capacity and increase the quantity of chemisorbed oxygen and oxygen vacancy, thus facilitating NO oxidation into NO2 and eventually promoting the fast SCR reaction. In accord with the structure results, the Mn15Fe15−Ce/Al sample exhibited the highest NO oxidation rate of 64.2% at 350 °C and the broadest temperature window of 75–350 °C with the NOx conversion >90%. Based on the structure–activity relationship discussion, the catalytic mechanism over the Mn−Fe−Ce ternary components supported by γ-Al2O3 were proposed. Overall, it was believed that the optimization of Mn/Fe ratio in Mn−Fe−Ce/Al nanocatalyst was an extremely effective method to improve the structure–activity relationships for NO pre-oxidation and the fast SCR reaction.