Improved Photocatalytic Degradation of Phenolic Compounds With ZnAl Mixed Oxides Obtained from LDH Materials

Green Epoxidation of Olefins with ZnxAl/MgxAl-LDH Compounds: Influence of the Chemical Composition

This contribution concerns the effect of the chemical composition of the brucite-type layer of bi-cationic LDH materials ZnxAl and MgxAl (x = 2–5) and tri-cationic LDH MgyZnzAl (y + z = 4, y = 1, 2, 3) on their catalytic activity for olefin epoxidation with H2O2 in the presence of acetonitrile. LDH materials were prepared by the standard method of co-precipitation at constant pH 10, using an aqueous solution of the corresponding metal nitrates and a basic solution containing NaOH and Na2CO3. The fresh LDHs were calcined to yield the corresponding mixed oxides and then the recovery of the LDH structure by hydration of the mixed oxides was performed. The resulting samples were characterized by AAS, XRD, DRIFT, DR-UV–Vis, BET and determination of basic sites. The results of the catalytic tests for olefin epoxidation were well correlated with the basicity of the samples, which was in turn related to the M2+/Al3+ ratio and the electronegativity of different bivalent metals in the brucite-type layer.

Synthesis, Characterization and Photocatalytic Performance of Calcined ZnCr-Layered Double Hydroxides

The development of new materials for performing photocatalytic processes to remove contaminants is an interesting and important research line due to the ever-increasing number of contaminants on our planet. In this sense, we developed a layered double hydroxide material based on Zn and Cr, which was transformed into the corresponding oxide by heat treatment at 500 °C. Both materials were widely characterized for their elemental composition, and structural, morphological, optical and textural properties using several experimental techniques such as x-ray diffraction, x-ray photoelectron spectroscopy, scanning and transmission electron microscopy, Fourier transform infrared spectroscopy, UV-vis spectroscopy and physisorption techniques. In addition, the photocatalytic activity of both materials was analysed. The calcined one showed interesting photocatalytic activity in photodegradation tests using crystal violet dye. The operational parameters for the photocatalytic process using the calcined material were optimised, considering the pH, the initial concentration of the dye, the catalyst load, and the regeneration of the catalyst. The catalyst showed good photocatalytic activity, reaching a degradation of 100% in the optimised conditions and showing good performance after five photodegradation cycles.

Layered double hydroxides and LDH-derived materials in chosen environmental applications: a review

With increasing global warming awareness, layered double hydroxides (LDHs), hydrotalcites, and their related materials are key components to reduce the environmental impact of human activities. Such materials can be synthesized quickly with high efficiency by using different synthesis processes. Moreover, their properties' tunability is appreciated in various industrial processes. Regarding physical and structural properties, such materials can be applied in environmental applications such as the adsorption of atmospheric and aqueous pollutants, hydrogen production, or the formation of 5-hydroxymethylfurfural (5-HMF). After the first part that was dedicated to the synthesis processes of hydrotalcites, the present review reports on specific environmental applications chosen as examples in various fields (green chemistry and depollution) that have gained increasing interest in the last decades, enlightening the links between structural properties, synthesis route, and application using lamellar materials.

Sewage Sludge ZnCl2-Activated Carbon Intercalated MgFe-LDH Nanocomposites: Insight of the Sorption Mechanism of Improved Removal of Phenol from Water

Keywords: sludge-activated carbon; MgFe layered double hydroxide; nanocomposite materials; phenol aqueous uptake; mechanistic studies; reusability performance.

Optimization of ZnAl/Chitosan Supra-Nano Hybrid Preparation as Efficient Antibacterial Material

The menace of antimicrobial resistance continues to increase and hence the need to discover new antibiotics, especially alternative and effective sources such as hybrid organic-inorganic, organic-organic materials, and other combinations. In this study, an antimicrobial hybrid supra-nano material was prepared by the bi-titration synthesis method of chitosan (CS) and ZnAl layered double hydroxide. Fourier-transform infrared spectrometer (FTIR), thermogravimetric and differential thermal gravimetric (TGA/DTG), ultraviolet-visible (UV-Vis), X-ray diffraction (XRD), and scanning electron microscopy (SEM) analyses indicated that the ZnAl/CS hybrid exhibited low crystallinity with high thermal stability. The results of ZnAl/CS characterization showed the characteristic properties of the individual components ZnAl and CS, indicating a successful preparation of the ZnAl/CS hybrid. The antibacterial tests revealed that the ZnAl/CS hybrid possessed an enhanced antimicrobial effect against both Escherichia coli (E. coli, MTCC 739) and Penicilliumcyclopium (P. cyclopium, AS 3.4513). Under the central composite design (CCD) of the response surface methodology (RSM) tool, the parameters of the hybrid synthesis reaction were optimized and the result obtained was as follows: reaction pH was 11.3, reagent Zn/Al ratio was 3.27, and chitosan concentration was 1.07 g/L. After optimization, it was found that the antibacterial activity of ZnAl/CS was strengthened against E. coli as evidenced by a widening of the inhibition zone of about 41.6%. The antibacterial activity of ZnAl/CS was mainly due to the reactivation of the antibacterial activity of CS associated with the release of Zn²⁺ and Al³⁺ metal ions in addition to ZnO, Al₂O₃, and ZnAl₂O₄ compounds resulting from the method of preparation.

Efficiency of Novel Photocatalytic Coating and Consolidants for Protection of Valuable Mineral Substrates

In the process of protection and consolidation of valuable materials, the efficiency is the crucial property that needs to be considered. TiO₂/ZnAl layered double hydroxide (LDH) coating and silicate- and carbonate-based consolidants were synthesized and proposed to be used for protection and consolidation of four porous mineral substrates: brick, stone, render and mortar. The photocatalytic efficiency of TiO₂/ZnAl LDH coating, as well as consolidation efficiency of two consolidants, both applied on model substrates, were studied. The photocatalytic coating showed significant activity and performed well after the durability tests involving rinsing and freezing/thawing procedures. After treatment with both consolidants, a serious enhancement of consolidation of the used substrates was found. On the other hand, the application of TiO₂/ZnAl LDH, as well as consolidants, caused negligible changes in the water vapour permeability values and in appearance of the porous mineral substrates, indicating a high level of compatibility.

Photocatalytic degradation of 2,4-dichlorophenol with MgAlTi mixed oxides catalysts obtained from layered double hydroxides

MgAl and MgAlTi mixed oxides were obtained from the thermal treatment of LDH materials synthesized by the sol-gel method; these materials were characterized by N2 physisorption, XRD, UV-vis, XPS, EDS-SEM and TEM techniques. According to the results, Ti was incorporated in the LDH layer when content in the material was low. The MgAl and MgAlTi mixed oxides were evaluated in the photo-degradation of 2,4-dichlorophenol (2,4-DCP) in the presence of UV light. A superior efficiency in the photo-degradation of 2,4-DCP, in comparison with the Degussa P-25 TiO2 reference catalyst was observed, reaching a total decomposition of the 2,4-DCP molecule in less than 60 min. According to the results, Ti was incorporated in the LDH layer when the content in the material was low. The MgAl and MgAlTi mixed oxides were evaluated in the photo-degradation of 2,4-dichlorophenol (2,4-DCP) in the presence of UV light. A superior efficiency in the photo-degradation of 2,4-DCP with the MgAl and MgAlTi mixed oxides, in comparison with the Degussa P-25 TiO2 reference catalyst was observed, reaching a total decomposition of the 2,4-DCP molecule in less than 60 min.