CO2 Hydrogenation Over Ni-Based Zeolites: Effect of Catalysts Preparation and Pre-reduction Conditions on Methanation Performance

Advanced zeolite and ordered mesoporous silica-based catalysts for the conversion of CO2 to chemicals and fuels

For many years, capturing, storing or sequestering CO₂ from concentrated emission sources or from air has been a powerful technique for reducing atmospheric CO₂. Moreover, the use of CO₂ as a C1 building block to mitigate CO₂ emissions and, at the same time, produce sustainable chemicals or fuels is a challenging and promising alternative to meet global demand for chemicals and energy. Hence, the chemical incorporation and conversion of CO₂ into valuable chemicals has received much attention in the last decade, since CO₂ is an abundant, inexpensive, nontoxic, nonflammable, and renewable one-carbon building block. Nevertheless, CO₂ is the most oxidized form of carbon, thermodynamically the most stable form and kinetically inert. Consequently, the chemical conversion of CO₂ requires highly reactive, rich-energy substrates, highly stable products to be formed or harder reaction conditions. The use of catalysts constitutes an important tool in the development of sustainable chemistry, since catalysts increase the rate of the reaction without modifying the overall standard Gibbs energy in the reaction. Therefore, special attention has been paid to catalysis, and in particular to heterogeneous catalysis because of its environmentally friendly and recyclable nature attributed to simple separation and recovery, as well as its applicability to continuous reactor operations. Focusing on heterogeneous catalysts, we decided to center on zeolite and ordered mesoporous materials due to their high thermal and chemical stability and versatility, which make them good candidates for the design and development of catalysts for CO₂ conversion. In the present review, we analyze the state of the art in the last 25 years and the potential opportunities for using zeolite and OMS (ordered mesoporous silica) based materials to convert CO₂ into valuable chemicals essential for our daily lives and fuels, and to pave the way towards reducing carbon footprint. In this review, we have compiled, to the best of our knowledge, the different reactions involving catalysts based on zeolites and OMS to convert CO₂ into cyclic and dialkyl carbonates, acyclic carbamates, 2-oxazolidones, carboxylic acids, methanol, dimethylether, methane, higher alcohols (C₂₊OH), C₂₊ (gasoline, olefins and aromatics), syngas (RWGS, dry reforming of methane and alcohols), olefins (oxidative dehydrogenation of alkanes) and simple fuels by photoreduction. The use of advanced zeolite and OMS-based materials, and the development of new processes and technologies should provide a new impulse to boost the conversion of CO₂ into chemicals and fuels.

Carbon Dioxide Reforming of Methane over Nickel-Supported Zeolites: A Screening Study

As the utilization of zeolites has become more frequent in the dry reforming of methane (DRM) reaction, more systematic studies are required to evaluate properly the influence of zeolites’ composition and framework type on the performance. Therefore, in this work, a step-by-step study was performed with the aim of analyzing the effects of Ni loading (5, 10 or 15 wt.% over USY(3) zeolite), Si/Al ratio (3, 15 or 38 on USY zeolites with 15 wt.% Ni) and framework type (USY, BEA, ZSM-5 or MOR for 15 wt.% Ni and Si/Al ratios of ≈40) on catalysts’ properties and performances. Increasing Ni loadings enhanced CH4 and CO2 conversions even though the catalysts’ stability was decreasing over the time. The variation of the Si/Al ratio on USY and the use of different zeolites had also a remarkable impact on the catalytic performance. For instance, at 500–600 °C reaction temperatures, the catalysts with higher basicity and reducibility exhibited the best results. However, when the temperature was further increased, catalysts presenting stronger metal–support interactions (nickel nanoparticles located in mesoporous cavities) displayed the highest conversions and stability over time. In brief, the use of 15 wt.% Ni and a USY zeolite, with both micro- and mesopores and high surface area, led to the best performances, mainly attributed to a favorable number of Ni0 active sites and the establishment of stronger metal–support interactions (due to nanoparticles confinement inside the mesopores).

Alkali and Alkali-Earth Metals Incorporation to Ni/USY Catalysts for CO2 Methanation: The Effect of the Metal Nature

CO2 methanation is typically carried out using Ni-supported catalysts containing promoters such as alkali or alkali-earth metals to improve their properties. In this work, bimetallic Ni-based USY zeolite catalysts containing alkali (Li, K and Cs) and alkali-earth (Mg, Ca) metal compounds were prepared using the same conditions (15 wt% of metals; co-impregnation), characterized by N2 sorption, XRD, TGA, CO2 adsorption–desorption, DRS UV-Vis and H2-TPR, and finally applied in CO2 methanation reaction (86,100 mL h−1 g−1, PCO2 = 0.16 bar, H2:CO2 = 4:1). For each group, the effects of the second metal nature on the properties and performances were assessed. Alkali metals incorporation induced considerably low catalytic performances (CH4 yields < 26%), attributed to their negative impact on zeolite structure preservation. On the contrary, alkali-earth metal-containing catalysts exhibited lower structural damage. However, the formation of Ni-Mg mixed oxides in Ni-Mg/USY catalyst and CaCO3 during the reaction in Ni-Ca/USY sample could explain their performances, similar or lower than those obtained for Ni/USY catalyst. Among the studied metals, calcium was identified as the most interesting (CH4 yield of 65% at 415 °C), which was ascribed to the slight improvement of the Ni0 dispersion.

CO2 Hydrogenation to Synthetic Natural Gas over Ni, Fe and Co–Based CeO2–Cr2O3

CO2 methanation was studied over monometallic catalyst, i.e., Ni, Fe and Co; on CeO2-Cr2O3 support. The catalysts were prepared using one-pot hydrolysis of mixed metal nitrates and ammonium carbonate. Physicochemical properties of the pre- and post-exposure catalysts were characterized by X-Ray Powder Diffraction (XRD), Hydrogen Temperature Programmed Reduction (H2-TPR), and Field Emission Scanning Electron Microscope (FE-SEM). The screening of three dopants over CeO2-Cr2O3 for CO2 methanation was conducted in a milli-packed bed reactor. Ni-based catalyst was proven to be the most effective catalyst among all. Thus, a group of NiO/CeO2-Cr2O3 catalysts with Ni loading was investigated further. 40 % NiO/CeO2-Cr2O3 exhibited the highest CO2 conversion of 97.67% and CH4 selectivity of 100% at 290 °C. The catalytic stability of NiO/CeO2-Cr2O3 was tested towards the CO2 methanation reaction over 50 h of time-on-stream experiment, showing a good stability in term of catalytic activity.

Promising Catalytic Systems for CO2 Hydrogenation into CH4: A Review of Recent Studies

The increasing utilization of renewable sources for electricity production turns CO2 methanation into a key process in the future energy context, as this reaction allows storing the temporary renewable electricity surplus in the natural gas network (Power-to-Gas). This kind of chemical reaction requires the use of a catalyst and thus it has gained the attention of many researchers thriving to achieve active, selective and stable materials in a remarkable number of studies. The existing papers published in literature in the past few years about CO2 methanation tackled the catalysts composition and their related performances and mechanisms, which served as a basis for researchers to further extend their in-depth investigations in the reported systems. In summary, the focus was mainly in the enhancement of the synthesized materials that involved the active metal phase (i.e., boosting its dispersion), the different types of solid supports, and the frequent addition of a second metal oxide (usually behaving as a promoter). The current manuscript aims in recapping a huge number of trials and is divided based on the support nature: SiO2, Al2O3, CeO2, ZrO2, MgO, hydrotalcites, carbons and zeolites, and proposes the main properties to be kept for obtaining highly efficient carbon dioxide methanation catalysts.

Zeolite-Supported Ni Catalysts for CO2 Methanation: Effect of Zeolite Structure and Si/Al Ratio

The urgent need to reduce CO2 emissions requires the development of efficient catalysts for the conversion of CO2 into chemicals and fuels. In this study, a series of nickel catalysts supported on ITQ-2 and ZSM-5 zeolites have been prepared, characterized and tested in the hydrogenation reaction of CO2 towards methane. Specifically, two ITQ-2 and two ZSM 5 zeolites with different aluminum content have been studied. For both types, the higher Si/Al ratio of the material, the more active the catalyst due probably to its higher hydrophobicity. The largest difference was found for the ITQ-2 samples, being the CO2 conversion for the sample with a greater Si/Al ratio 50 points higher at 350 °C. Comparing both zeolite structures, while similar catalytic results were obtained with the samples with lower Si/Al ratio, a distinctly higher activity was found for the ITQ-2 zeolite without aluminum, pure silica. Therefore, this result suggests that the presence of aluminum is of particular relevance. Among the studied materials, the catalyst supported on the delaminated ITQ-2 zeolite without Al was the most active catalyst. Its higher activity was mainly attributed to the smaller crystallite size of nickel supported on the large external surface area presented by this zeolite.

Recent Progresses in Constructing the Highly Efficient Ni Based Catalysts With Advanced Low-Temperature Activity Toward CO2 Methanation

With the development and prosperity of the global economy, the emission of carbon dioxide (CO2) has become an increasing concern. Its greenhouse effect will cause serious environmental problems, such as the global warming and climate change. Therefore, the worldwide scientists have devoted great efforts to control CO2 emissions through various strategies, such as capture, resource utilization, sequestration, etc. Among these, the catalytic conversion of CO2 to methane is considered as one of the most efficient routes for resource utilization of CO2 owing to the mild reaction conditions and simple reaction device. Pioneer thermodynamic studies have revealed that low reaction temperature is beneficial to the high catalytic activity and CH4 selectivity. However, the low temperature will be adverse to the enhancement of the reaction rate due to kinetic barrier for the activation of CO2. Therefore, the invention of highly efficient catalysts with promising low temperature activities toward CO2 methanation reaction is the key solution. The Ni based catalysts have been widely investigated as the catalysts toward CO2 methanation due to their low cost and excellent catalytic performances. However, the Ni based catalysts usually perform poor low-temperature activities and stabilities. Therefore, the development of highly efficient Ni based catalysts with excellent low-temperature catalytic performances has become the research focus as well as challenge in this field. Therefore, we summarized the recent research progresses of constructing highly efficient Ni based catalysts toward CO2 methanation in this review. Specifically, the strategies on how to enhance the catalytic performances of the Ni based catalysts have been carefully reviewed, which include various influencing factors, such as catalytic supports, catalytic auxiliaries and dopants, the fabrication methods, reaction conditions, etc. Finally, the future development trend of the Ni based catalysts is also prospected, which will be helpful to the design and fabrication of the Ni catalysts with high efficiency toward CO2 methanation process.