Predictive modeling of an azo metal complex dye sorption by pumpkin husk

Ofloxacin adsorptive interaction with rice husk ash: Parametric and exhausted adsorbent disposability study

The present study investigates the adsorptive interaction of rice husk ash (RHA) with Ofloxacin (OFL) antibiotic. The OFL loaded RHA was studied for its disposability by solidification to find its possible use as a building material. Further, toxicity analysis of leachate from the solidified RHA was also studied for probable leaching of OFL. The effects of adsorption parameters such as initial pH, the dosage of RHA (m), initial OFL concentration (C₀), and contact time (t) on the responses % OFL removal (X₁) and adsorption capacity (mg/g) (X₂) were evaluated using the central composite design (CCD) based on response surface method (RSM). Kinetic and thermodynamic studies were performed at optimized parameters, and adsorption equilibrium data were illustrated by using Langmuir, Redlich-Peterson (R-P), and Tempkin isotherm models. Optimum condition was found as m = 7.94 g/L, t = 430 min and pH = 6, and at this actual responses X₁ and X₂ were evaluated as 79.71% and 6.28 mg/g, respectively. Pseudo-first-order kinetic fitted best for the adsorption kinetic data. Toxicity analysis of leachate from solidified RHA indicated that most of the OFL was encapsulated inside the cement and the OFL present in leachate is not sufficient to eradicate the growth of E.coli and Bacillus subtilis.

Development of a new adsorbent from pumpkin husk by KOH-modification to remove copper ions

Heavy metal pollution in watercourses is a major environmental problem throughout the world due to rapid population growth, industrialization, and economic development. Considering this, the present study aimed to develop a new adsorbent from pumpkin husk (PH) by KOH modification to remove copper (Cu²⁺) ions and to explore its adsorptive potential. The sorption studies of Cu²⁺ on KOH-modified PH were carried out as functions of particle size, solution pH, adsorbent dose, temperature, initial metal concentration, and contact time. The sorption capacity of KOH-modified PH was found to be higher than that of raw PH, as 19.4 and 10.2 mg g^-1, respectively. Morphology and surface structures of adsorbents were characterized by determination of zero point charge, a Fourier transform infrared spectrometer (FTIR-ATR) spectra, and a scanning electron microscopy (SEM) of PH powders before and after the sorption of Cu²⁺. The pH_zpc of PH was found to be 5.0. FTIR-ATR analyses indicated that amino, amide, hydroxyl, carboxyl, and oxygenated groups of PH play an important role in the sorption process. Sorption isotherm, kinetic, and thermodynamic parameters of Cu²⁺ on KOH-modified PH were studied. The kinetic process was well represented by the Logistic model. The maximum sorption was found as 73.16 mg g^-1 according to the well-fitting of Langmuir isotherm. Results of sorption and thermodynamic studies indicated that the process was exothermic, being feasible, and spontaneous. KOH-modified PH as an eco-friendly adsorbent had great potential to remove Cu²⁺ ions from aquatic system.

Utilization of magnetically responsive cereal by-product for organic dye removal

BACKGROUND

Barley straw, an agricultural by-product, can also serve as a low-cost and relatively efficient adsorbent of various harmful compounds. In this case, adsorption of four water-soluble dyes belonging to different dye classes (specifically Bismarck brown Y, representing the azo group; methylene blue, quinone-imine group; safranin O, safranin group; and crystal violet, triphenylmethane group) on native and citric acid-NaOH-modified barley straw, both in magnetic and non-magnetic versions, was studied.

RESULTS

The adsorption was characterized using three adsorption models, namely Langmuir, Freundlich and Sips. To compare the maximum adsorption capacities (qmax), the Langmuir model was employed. The qmax values reached 86.5-124.3 mg of dye per g of native non-magnetic straw and 410.8-520.3 mg of dye per g of magnetic chemically modified straw. Performed characterization studies suggested that the substantial increase in qmax values after chemical modification could be caused by rougher surface of adsorbent (observed by scanning electron microscopy) and by the presence of higher amounts of carboxyl groups (detected by Fourier transform infrared spectroscopy). The adsorption processes followed the pseudo-second-order kinetic model and thermodynamic studies indicated spontaneous and endothermic adsorption.

CONCLUSION

The chemical modification of barley straw led to a significant increase in maximum adsorption capacities for all tested dyes, while magnetic modification substantially facilitated the manipulation with adsorbent.

Predictive modeling of sorption and desorption of a reactive azo dye by pumpkin husk

The use of effective disposal of redundant pumpkin husk (PH) to remove pollutants is an important issue for environmental protection and utilization of resource. The aim of this study was to remove a potentially toxic reactive azo dye, Reactive Red (RR) 120, by widespread PH as a low-cost adsorbent. Particle size, adsorbent dose, pH, temperature, initial dye concentration, and contact time affected the sorption process. Amine, amide, hydroxyl, and carboxyl groups of PH played significant roles on the sorption process. Rapid sorption occurred within the first 2 min and equilibrium was reached within 60 min. Sorption kinetic was well represented by logistic equation. Generated secondary logistic model can be used to describe effects of initial dye concentration, contact time, and temperature by a single equation with high R (2) value. Monolayer sorption capacity was found as 98.61 mg g(-1). Activation energy, thermodynamic, and desorption studies showed that this process was physical, endothermic, and spontaneous. This study indicated that redundant PH as a low-cost adsorbent had a great potential for the removal of RR 120 as an alternative eco-friendly process.