Waste rice straw and coal fly ash composite as a novel sustainable catalytic particle electrode for strengthening oxidation of azo dyes containing wastewater in electro-Fenton process

State-of-the-art review and bibliometric analysis on electro-Fenton process

The electro-Fenton (EF) process was first proposed in 1996 and, since then, considerable development has been achieved for its application in wastewater treatment, especially at lab and pilot scale. After more than 25 years, the high efficiency, versatility and environmental compatibility of EF process has been demonstrated. In this review, bibliometrics has been adopted as a tool that allows quantifying the development of EF as well as introducing some useful correlations. As a result, information is summarized in a more visual manner that can be easily analyzed and interpreted as compared to conventional reviewing. During the recent decades under review, 83 countries have contributed to the dramatic growth of EF publications, with China, Spain and France leading the publication output. The top 12 most cited articles, along with the top 32 most productive authors in the EF field, have been screened. Four stages have been identified as main descriptors of the development of EF throughout these years, being each stage characterized by relevant breakthroughs. To conclude, a general cognitive model for the EF process is proposed, including atomic, microscopic and macroscopic views, and future perspectives are discussed.

Electro-Fenton treatment of contaminated mine water to decrease thiosalts toxicity to Daphnia magna

Treatment of organic contaminants using the electro-Fenton (EF) process is efficient but generates toxic by-products. The aim of the present study was to assess the residual toxicity associated to the treatment of real mine effluents using EF and to perform a preliminary techno-economic analysis to compare the costs of different techniques. Two mine effluents from northern Quebec with different concentrations of thiosalts (ME_low and ME_high) were tested for acute toxicity to Daphnia magna, before and after EF treatment. The higher toxicity of untreated ME_low compared to ME_high, despite its lower thiosalts content (58 vs 199 mg/L), suggests the presence of an unidentified toxic species, which was removed during EF treatment, or that higher thiosalts concentrations mitigate the toxicity of other toxicants. EF treatment of ME_high, initially non-acutely toxic (50% mortality), resulted in the elimination of D. magna mortality. A preliminary techno-economic analysis conducted for northern Quebec vs the rest of Canada and the USA showed that energy consumption was the main contributor (52-95%) to the total operating costs. Electricity-related costs nearly doubled (55%) for northern Quebec relative to the rest of Canada. These findings provide new insights for the potential application of the EF for the treatment of thiosalts in mine water, for operations in central jurisdictions and in remote northern areas.

Performance and mechanism of methylene blue degradation by an electrochemical process

An exciting electrochemical oxidation (EO) process has been developed. Compared with electro-Fenton (EF) and electro-coagulation (EC) processes, this process had more advantages in the degradation of methylene blue. It is observed that methylene blue can be quickly degraded by EO, in which an iron rod is used as an anode, graphite is used as a cathode, and fly ash-red mud particles are used as particle electrodes. Compared to EC and EF processes that are affected by specific pH values, EO has excellent performance in the pH range of 3.0-11.0. In addition, the electric energy consumption (EEC) of EF, EC and EO is 81.51, 36.55 and 21.35 kW h m-3 respectively, suggesting EO is more economical. The free radical scavenging mechanism of i-PrOH is studied, and the contribution of EC, EF and fly ash-red mud particle electrodes in EO is inferred. Particle electrodes before and after use are characterized by SEM, EDS and BET to illustrate the role of particle electrodes in the EO system. Analysis of flocs and solutions by FTIR and GC-MS proves that EO can effectively degrade methylene blue, and the degradation route of methylene blue is speculated. The particle electrode dissolution experiment shows that the prepared fly ash-red mud particle electrode is considered to be suitable and safe for wastewater treatment. Finally, in actual surface water experiments, the EO process still has great potential.

Toxicity Reduction of Industrial and Municipal Wastewater by Advanced Oxidation Processes (Photo-Fenton, UVC/H2O2, Electro-Fenton and Galvanic Fenton): A Review

The application of Fenton-based advanced oxidation processes (AOPs), such as photo-Fenton or electro-Fenton for wastewater treatment have been extensively studied in recent decades due to its high efficiency for the decomposition of persistent organic pollutants. Usually Fenton-based AOPs are used for the degradation of targeted pollutant or group of pollutants, which often leads to the formation of toxic by-products possessing a potential environmental risk. In this work, we have collected and reviewed recent findings regarding the feasibility of Fenton-based AOPs (photo-Fenton, UVC/H2O2, electro-Fenton and galvanic Fenton) for the detoxification of real municipal and industrial wastewaters. More specifically, operational conditions, relevance and suitability of different bioassays for the toxicity assessment of various wastewater types, cost estimation, all of which compose current challenges for the application of these AOPs for real wastewater detoxification are discussed.

Possible applications of coal fly ash in wastewater treatment

Management of coal fly ash as a particulate byproduct of coal burning has become an issue to be solved right away due to environmental concerns related to soil, water, and air pollution. Many attempts have been made by researchers for the conversion of coal fly ash into useful products while searching feasible avenues for its sustainable utilization. Wastewater remediation using coal fly ash is one such attempt solving both waste management and water quality issues. The characteristics like morphology, surface area, porosity, and chemical composition (silica, alumina, iron oxide, titania, etc.) make coal fly ash amenable material for potential application in wastewater treatment. Few reports have summarized the coal fly ash utilization in wastewater treatment but solely discussed the adsorption. Besides adsorption, the current paper aims to highlight the possibilities of using coal fly ash in wastewater treatment by different technologies that extend the utilization scope in the domains of filtration, Fenton process, photocatalysis, and coagulation. The promising use of coal fly ash as an adsorbent, membrane filter, Fenton catalyst, photocatalyst, and as an integral part of these structures is reviewed. Finally, the current trends and future prospects on utilization modes of coal fly ash in wastewater treatment are stated.