Regenerable, innovative porous silicon-based polymer-derived ceramics for removal of methylene blue and rhodamine B from textile and environmental waters

Biochar from co-pyrolysis of biological sludge and woody waste followed by chemical and thermal activation: end-of-waste procedure for sludge management and biochar sorption efficiency for anionic and cationic dyes

Nine biochars were produced by co-pyrolysis of sawdust and biological sludge following the "design of experiment" approach. Two kinds of sludge (both deriving from the treatment of mixed industrial-municipal wastewater) and two types of woody waste were selected as categorical predicting variables, while contact time, pyrolysis temperature, and sludge percentage were used as quantitative variables. Biochars were analysed for their product characteristics and environmental compatibility based on the European Standards (EN 12915-1:2009) for materials intended for water treatment (i.e. ash content, water leachable polycyclic aromatic hydrocarbons (PAHs) and elements), as well as for specific surface area (SSA), using them as response variables of a multivariate partial least square multiple regression, whose results provided interesting insights on the relationships between pyrolysis conditions and biochar characteristics. Biochars produced with sludge and/or providing the highest SSA values (258-370 m2 g-1) were selected to undergo a sustainable chemical treatment using a by-product of the gasification of woody biomass, complying in all cases with European Standards and achieving therefore the end-of-waste status for sewage sludge. The biochar deriving from the highest percentage of sludge (30% by weight) and with the highest SSA (390 m2 g-1) was thermally activated achieving SSA of 460 m2 g-1 and then tested for the sorption of direct yellow 50 and methylene blue in ultrapure water and real wastewater, compared to a commercial activated carbon (AC). The biochar showed Langmuir sorption maxima (Qm) 2-9 times lower than AC, thus highlighting promising sorption performances. Qm for methylene blue in wastewater (28 mg‧g-1) was confirmed by column breakthrough experiments.

GO-CuO nanocomposites assimilated into CA-PES polymer membrane in adsorptive removal of organic dyes from wastewater

Textile industries are one of the leading environmental pollutants by releasing harmful dye effluents. In many textile distrts, the amount of excess color in treated textile effluent that exceeds regulatory limitations is still being a major concern. The combining usage of nanomaterials and polymer material to solve these issues using various techniques. In this research, graphene oxide-copper oxide (GO-CuO) nanomaterial have been incorporated into cellulose-acetate (CA), poly-ether sulfone (PES) blend polymer by using phase inversion process to fabricate thin film nanocomposite (TFN) membrane for removal of dye pollutant. The physiochemical properties of prepared TFN materials were studied by Fourier transform infra-red spectroscopy (FT-IR), X-ray diffractometer (XRD), field emission scanning electron microscopy (FE-SEM), atomic force microscopy (AFM), thermo gravimetric analysis (TGA), and mechanical strength analysis. Dye adsorption experiments were performed with four typical water-soluble organic dyes methylene blue (MB), rhodamine blue (Rh. B), methyl orange (MO) and Congo red (CR). After reaching adsorption equilibrium, the composite membrane final removal effectiveness for MB 92.42%, Rh. B 89.39%, CR 68.39%, and MO 58.82% respectively. As a result, the fabricated TFN material proves to be an effective adsorbent material for cationic dye molecules. Also, when the fabricated material was tested with textile industry effluent sample, all physio-chemical properties exhibited a considerable decrease in concentrations when compared to the real textile effluent concentration. The treated effluents permitted for a relatively greater growth and germination index of Tropical amaranth roots than the textile effluent, this demonstrates that phytotoxicity testing was also successful. The most effective temperature, concentration and pH were found to be 273 K, 1 × 10^-5 M and pH 9. The fabricated TFN membrane material (GO-CuO @ CA-PES) can be recommended for water treatment applications.

SiC Foams for the Photocatalytic Degradation of Methylene Blue under Visible Light Irradiation

SiC foams were synthesized by impregnating preceramic polymer into polyurethane foam templates, resulting in a photo-catalytically active material for the degradation of methylene blue. The crystalline structure, electronic properties, and photocatalytic performance of the SiC foams were characterized using a series of experimental techniques, including X-ray diffraction, electron microscopy, energy dispersive X-ray spectroscopy, N2 physisorption measurements, UV-visible spectroscopy, and methylene blue photodegradation tests. The original polyurethane template's microporous structure was maintained during the formation of the SiC foam, while additional mesopores were introduced by the porogen moieties added to the preceramic polymers. The prepared SiC-based photocatalyst showed attractive photocatalytic activity under visible light irradiation. This structured and reactive material offers good potential for application as a catalytic contactor or membrane reactor for the semi-continuous treatment of contaminated waste waters in ambient conditions.

Characterization Techniques as Supporting Tools for the Interpretation of Biochar Adsorption Efficiency in Water Treatment: A Critical Review

Over the past decade, biochar (BC) has received significant attention in many environmental applications, including water purification, since it is available as a low-cost by-product of the energetic valorisation of biomass. Biochar has many intrinsic characteristics, including its porous structure, which is similar to that of activated carbon (AC), which is the most widely used sorbent in water treatment. The physicochemical and performance characteristics of BCs are usually non-homogenously investigated, with several studies only evaluating limited parameters, depending on the individual perspective of the author. Within this review, we have taken an innovative approach to critically survey the methodologies that are generally used to characterize BCs and ACs to propose a comprehensive and ready-to-use database of protocols. Discussion about the parameters of chars that are usually correlated with adsorption performance in water purification is proposed, and we will also consider the physicochemical properties of pollutants (i.e., K_ow). Uniquely, an adsorption efficiency index BC/AC is presented and discussed, which is accompanied by an economic perspective. According to our survey, non-homogeneous characterization approaches limit the understanding of the correlations between the pollutants to be removed and the physicochemical features of BCs. Moreover, the investigations of BC as an adsorption medium necessitate dedicated parallel studies to compare BC characteristics and performances with those of ACs.

Insight in to sunlight-driven rapid photocatalytic degradation of organic dyes by hexacyanoferrate-based nanoparticles

Release of colouring agents into the environment alarms the need to design a cheap, quick and safe process. Owing to environmental safety concern, synthesis of two metal hexacyanoferrates (MHCFs) based on cadmium (CdHCF) and manganese (MnHCF) was carried out using natural plant extract of Azadirachta indica and water as a solvent. Synthesized MHCFs were utilized for the removal of an acid dye (fuchsin acid, FA) and a xanthenes dye (rhodamine B, RB). The reactions were optimized at various conditions of dye concentration, catalyst dose, reaction pH, time and source of light. The MHCFs showed excellent results with both the dyes within very limited span of time (2 h). Consequently, 98% of FA and 97% of RB were degraded with 10 mg of CdHCF, at neutral pH and under sunlight. The degradation process followed the first-order reaction kinetics having t_1/2 around 0.3 min. The MHCFs exhibited difference of only little percentage in degradation owing to a very slight difference between their surface areas (CdHCF: 54.1 m² g^-1; MnHCF: 49.7 m² g^-1). The synthesised nanocatalysts were stable as indicated by their higher negative zeta potential values. The adsorption of dyes was found to be maximum with CdHCF having X_m value 19.69 mg g^-1 and 18.15 mg g^-1 for FA and RB, respectively. Photocatalytic degradation involved the main role of hydroxyl radical as indicated by decline in activity of nanocatalyst in the presence of scavengers. All in all, this study presents highly active nanomaterials with higher surface area, stability and semiconducting properties under natural conditions.

Mesoporous Polymer-Derived Ceramic Membranes for Water Purification via a Self-Sacrificed Template

Membrane separation has been widely used in water purification, and mesoporous ceramic membranes show a high potential in the future because of their high stability and resistance to harsh environments. In the current study, a novel polymer-derived ceramic silicon oxycarbide (SiOC) membrane was developed via a preceramic reactive self-sacrificed method and was further applied in a homemade dead-end system for water purification. A cyclosiloxane hybrid polymer was selected as the precursor and polydimethylsiloxane (PDMS) was used as the sacrificial template. Membrane pores were formed because of template removal during the sintering process, creating channels for water transportation. The pore size and porosity could be readily adjusted by changing the amounts and types of PDMS used in the fabrication process. The as-prepared SiOC membrane showed a high water permeability (140 LMH@2.5 bar) and high removal rate of rhodamine B (RhB), demonstrating its potential applications in water treatment. This work would provide an easy and scalable method to prepare ceramic membranes with a controlled pore size, which could be used for different water treatment applications.

Synthesis of a novel 3,5-diacrylamidobenzoic acid based hyper-cross-linked resin for the efficient adsorption of Congo Red and Rhodamine B

A novel hyper cross-linked, 3,5-diacrylamidobenzoic acid based resin (APEADA) has been synthesized for the highly efficient removal of Congo red (CR) and Rhodamine B (RhB) from aqueous solution. The synthesized resin was extensively characterized by FT-IR, FESEM, PXRD, EDX, BET analysis, TGA and solid state ¹³C (CP-MAS) NMR. APEADA exhibits thermal stability (≈ 200 °C) and a considerable surface area (64.78 m² g^-1), as suggested by Thermogravimetric Analysis (TGA) and Brunauer-Emmett-Teller (BET) analysis, respectively. The experimental data of dyes adsorption onto resin was examined by a variety of isotherm models wherein Langmuir and Temkin models were found to be the best fit for explaining the adsorption of both RhB (R² = 0.9899) and CR (R² = 0.9919). The resin can efficiently remove CR (92.03%) at pH 8.14 and moderately adsorb RhB (45.3%) at pH 5.01 and exhibits maximum adsorption capacity (Q_max) for CR (280.0 mg g^-1) and RhB (23.28 mg g^-1) at 318.6 K. The thermodynamic analysis of the data revealed that the adsorption processes were exothermic and spontaneous. Moreover, APEADA showed efficient removal efficiency (80.13%) for dyes in simulated effluents which warrants its utility and effectiveness in industrial waste water treatment.

Quenching-Induced Structural Distortion of Graphitic Carbon Nitride Nanostructures: Enhanced Photocatalytic Activity and Electrochemical Hydrogen Production

Engineered nanomaterials are emerging in the field of environmental chemistry. This study involves the analysis of the structural, electronic, crystallinity, and morphological changes in graphitic carbon nitride (g-C₃N₄), an engineered nanomaterial, under rapid cooling conditions. X-ray diffraction, scanning electron microscopy, high-resolution transmission electron microscopy, Brunauer-Emmett-Teller, Fourier transform infrared, Raman, band gap, and Mott-Schottky analyses strongly proved that the liquid N₂-quenched sample of g-C₃N₄ has structural distortion. The photocatalytic efficiency of engineered g-C₃N₄ nanostructures was analyzed through the degradation of reactive red 120 (RR120), methylene blue (MB), rhodamine B, and bromophenol as a representative dye. The photocatalytic dye degradation efficiency was analyzed by UV-vis spectroscopy and total organic carbon (TOC) analysis. The photocatalytic efficiency of g-C₃N₄ under different quenching conditions included quenching at room temperature in ice and liquid N₂. The degradation efficiencies are found to be 4.2, 14.7, and 82.33% for room-temperature, ice, and liquid N₂ conditions, respectively. The pseudo-first-order reaction rate of N₂-quenched g-C₃N₄ is 9 times greater than the ice-quenched g-C₃N₄. Further, the TOC analysis showed that 55% (MB) and 59% (RR120) of photocatalytic mineralization were achieved within a time duration of 120 min by the liquid N₂-quenched g-C₃N₄ nanostructure. In addition, the quenched g-C₃N₄ electrocatalytic behavior was examined via the hydrogen (H₂) evolution reaction in acidic medium. The liquid N₂-quenched g-C₃N₄ catalyst showed a lower overpotential with high H₂ evolution when compared with the other two g-C₃N₄-quenched samples. The results obtained provide an insight and extend the scope for the application of engineered g-C₃N₄ nanostructures in the degradation of organic pollutants as well as for H₂ evolution.

Photocatalytic Activity of Bismuth Ferrite Nanoparticles Synthesized via Sol-Gel Route

Nanosized, magnetically separable bismuth ferrite (BFO) nanoparticles, pertaining a crystallite size in the range of 14–15 nm were prepared via facile sol-gel technique. The product was characterized by scanning electron microscopy, X-ray diffraction, and Fourier-transform infrared spectroscopy. The product was explored for the photocatalytic mineralization of rhodamine B (RB) dye in aqueous medium. The effect of different investigational parameters such as amount of photocatalyst, initial dye concentration and irradiation time on the photocatalytic degradation of RB was studied. The results reveal that the catalyst shows good degrading ability under normal pH and visible light conditions. BFO nanoparticles demonstrated a strong absorption ability in the visible-light region, which lead to efficient photocatalytic degradation of RB dye The reaction system was heterogeneous in nature in which the catalyst can be separated by a normal magnet.