Concurrent removal of elemental mercury and SO2 from flue gas using a thiol-impregnated CaCO3-based adsorbent: a full factorial design study

Low-temperature aerobic carbonization and activation of cellulosic materials for Pb2+ removal in water source

Targeting the removal of Pb²⁺ in wastewater, cellulosic materials were carbonized in an aerobic environment and activated via ion exchange. The maximum adsorption capacity reached 243.5 mg/g on an MCC-derived adsorbent activated with sodium acetate. The modified porous properties improved the adsorption capacity. The capacity could be completely recovered five times through elution with EDTA. Because of the negative effects of Ni, Mg, and Ca elements, the adsorption capacities of activated carbonized natural materials were lower than that of pure cellulose. N₂ adsorption measurement showed that the adsorbent had a large specific surface area as well as abundant micropores and 4-nm-sized mesopores. FTIR and surface potential results proved that carboxyl group was generated in the aerobic carbonization, and was deprotonated during ion exchange. This adsorbent consisted of C-C bonds as the building blocks and hydrophilic groups on the surface. XPS results demonstrated that the Pb 4f binding energies were reduced by 0.7-0.8 eV due to the interaction between Pb²⁺ and the activated adsorbent, indicating that the carboxylate groups bonded with Pb²⁺ through coordination interactions. Pseudo-second-order and Elovich kinetic models were well fitted with the adsorption processes on the pristine and activated carbonized adsorbents, indicative of chemisorption on heterogeneous surfaces. The Freundlich expression agreed well with the data measured, and the pristine and activated adsorbents had weak and strong affinities for Pb²⁺, respectively. The Pb²⁺ adsorption process was exothermic and spontaneous, and heat release determined the spontaneity. The adsorption capacity is attributed to the carboxylate groups and pores generated in the aerobic oxidation and ion exchange procedures.

Remediation of brownfields contaminated by organic compounds and heavy metals: a bench-scale test of a sulfur/vermiculite sorbent for mercury vapor removal

In this study, we report for the first time a novel type of sorbent that can be used for mercury adsorption from the air-based off-gasses-vermiculite impregnated with alkali polysulfides and thiosulfates. In contrast to other sorbents, vermiculite exhibits superior thermal stability in air and low adsorption capacity for organic vapors. This allows for a more favorable design of the soil remediation unit-direct coupling of thermal desorber with catalytic oxidizer using air as a carrier gas. In the bench-scale test at 180 °C, the sulfur/vermiculite sorbent exhibited significantly higher efficiency for the adsorption of mercury vapor from the off-gasses than the commercial sulfur/activated carbon sorbent at its highest operating temperature (120 °C). The average mercury concentration in the adsorber off-gas decreased from 1.634 mg/m³ for the sulfur/activated carbon to 0.008 mg/m³ achieved with impregnated vermiculite. The total concentration of organic compounds in the soil after thermal desorption was below the detection limit of the employed analytical method.

Natural Kaolin: Sustainable Technology for the Instantaneous and Energy-Neutral Recycling of Anthropogenic Mercury Emissions

Kaolin, a natural and inexpensive clay mineral, is ubiquitous in soil, dirt, and airborne particles. Amongst four commonly available clay minerals, kaolin, as a result of its layered structure, is the most efficient natural gaseous Hg adsorbent to date (Langmuir maximum adsorption capacity Q_m =574.08 μg g^-1 and Freundlich Q_m =756.49 μg g^-1 ). The Hg uptake proceeds by homogeneous monolayer and heterogeneous processes. Hg physisorption on kaolin occurs in the dark, yet the adsorption rate is enhanced upon irradiation. The effects of several metal complexes, salts, halides and solvents on the Hg uptake were examined. The addition of CuCl₂ particles leads to a significant enhancement of the Hg uptake capacity (>30 times) within second timescales and without irradiation. The physisorption with kaolin is switched to chemisorption upon the addition of CuCl₂ to kaolin. This process is entirely reversible upon the addition of Zn/Sn granules at room temperature without any added energy. However, the investment of a small amount of renewable energy can speed up the process. This technology demonstrates the facile and efficient capture and recycling of elemental Hg⁰ from air. A wide range of metal particles and diverse physicochemical processes, which include the microphysics of nucleation, are herein examined to explore the potential reaction mechanism by using a suite of complementary analytical techniques. These new mechanistic insights open a new era of energy-neutral environmental remediation based on natural soil/airborne particles.

High adsorption activated calcium silicate enabling high-capacity adsorption for sulfur dioxide

Fly ash, with its abundant silicon sources and high porosity, is an excellent precursor of porous silica-based sorbents, which are the key to obtaining high SO₂ adsorption performance.