Synthesis of magnetite-based nanocomposites for effective removal of brilliant green dye from wastewater

Magnetic nanocomposite of maize offal biomass for effective sequestration of Congo red and methyl orange dyes from contaminated water: modeling, kinetics and reusability

The current study aims to use a facile and novel method to remove Congo red (CR) and Methyl Orange (MO) dyes from contaminated water with Maize offal biomass (MOB) and its nanocomposite with magnetic nanoparticles (MOB/MNPs). The MOB and MOB/MNPs were characterized with Fourier-transform infrared (FTIR), scanning electron microscopy (SEM), BET, XRD and point of zero charge (pHPZC). The influence of initial CR and MO levels (20-320 mg/L), adsorbent dosage (1-3 g/L), pH (3-9), co-exiting ions, temperature (25-45 °C) and time (15-180 min) was estimated. The findings demonstrated that MOB/MNPs exhibited excellent adsorption of 114.75 and 29.0 mg/g for CR and MO dyes, respectively while MOB exhibited 81.35 and 23.02 mg/g adsorption for CR and MO dyes, respectively at optimum pH-5, and dose 2 g/L. Initially, there was rapid dye removal which slowed down until equilibrium was reached. The interfering/competing ions in contaminated water and elevated temperature favored the dyes sequestration. The MOB/MNPs exhibited tremendous reusability and stability. The dyes adsorption was spontaneous, and exothermic with enhanced randomness. The adsorption effects were well explained with Freundlich model, pseudo second order and Elovich models. It is concluded that MOB/MNPs showed excellent, eco-friendly, and cost-effective potential to decontaminate the water.

Preparation and characterization of single perovskite microplates and its sunlight assisted photodecolorization activity, validated by response surface methodology

Perovskites overtaking simple metal oxides as solar light harvesting material due to their excellent photocatalytic efficiency and superior stability. An efficient visible light responsive, K₂Ba_0.3Cu_0.7O₃ single perovskites oxides (SPOs) photocatalyst was fabricated by a facile hydrothermal method. The fabricated SPOs was characterized by various techniques. SEM analysis confirm the cubic morphology of SPOs, the average length and diameter of SPOs were 27.84 and 10.06 μm calculated from SEM images. FT-IR analysis confirmed the presence of M-M and M - O bonds. EDX showed prominent peaks of the constituent elements. The average crystallite size of SPOs calculated by Scherrer and Williamson-Hall equation was 14.08 and 18.47 nm respectively. The optical band gap value lies in visible region of spectrum (2.0 eV) determined from the Tauce's plot. The fabricated SPOs was applied for photocatalytic degradation of methylene blue (MB) dye. Maximum degradation 98.09% of MB was achieved at 40 min irradiation time, 0.01 g catalyst dose, 60 mg L^-1 MB concentration and pH 9. The photocatalytic degradation of MB follows first order kinetic. RSM modeling of MB removal was also caried out. Reduce quadratic model was best fitted model having F-value = 300.65, P-value = < 0.0001,R² = 0.9897, predicted R² = 0.9850 and adjusted R² = 0.9864.

Phytoremediation plants (ramie) and steel smelting wastes for calcium silicate coated-nZVI/biochar production: Environmental risk assessment and efficient As(V) removal mechanisms

Arsenic is one of the most common and harmful pollutants in environment throughout the world, especially in aqueous solutions. In this study, two kinds of industrial solid wastes (Oxide scale (OS) and Blast furnace slag (BFS)) and one kind of phytoremediation plant waste (Ramie stalk) were used to prepare an environmentally friendly, low-cost, and efficient calcium silicate coated nano zero-valent iron (nZVI)/biochar composite (BOS) for As(V) adsorption. The potential environmental risks of BOS and their effects on removal of arsenic ions from aqueous media were investigated. The adsorption mechanism was explored and discussed based on XRD, SEM-EDS, XPS, etc. The results suggested that the environmental risk and heavy metals toxicity in BOS by co-pyrolysis were significantly reduced compared to the original materials, and no additional contaminant was observed in the subsequent experiments. Simultaneously, the BOS showed excellent As(V) removal capacity (>99%) and regenerative properties. The As(V) removal mechanisms are mainly ascribed to the complexation and co-precipitation between Fe and As, and the hydrogen bond between CO functional group of BOS and As. The mechanism of enhanced nZVI activity for As(V) removal was revealed. A protective layer of Ca₂SiO₄ was formed on the surface of nZVI during the co-pyrolysis process to prevent the passivation of nZVI. During the reaction process, the Ca₂SiO₄ covering the nZVI surface would be continuously detached to expose the fresh surface of nZVI, thus providing more redox activity and adsorption sites. This study provides a new way to treat and recycle industrial steel solid wastes and phytoremediation plant wastes, and the produced calcium silicate coated-nZVI/biochar composite is proposed to be a very promising material for practical remediation of As(V)-contaminated water bodies.

Biowaste-Derived, Highly Efficient, Reusable Carbon Nanospheres for Speedy Removal of Organic Dyes from Aqueous Solutions

The current work explores the adsorptive efficiency of carbon nanospheres (CNSs) derived from oil palm leaves (OPL) that are a source of biowaste. CNSs were synthesized at 400, 600, 800 and 1000 °C, and those obtained at 1000 °C demonstrated maximum removal efficiency of ~91% for malachite green (MG). Physicochemical and microscopic characteristics were analysed by FESEM, TEM, FTIR, Raman, TGA and XPS studies. The presence of surface oxygen sites and the porosity of CNSs synergistically influenced the speed of removal of MG, brilliant green (BG) and Congo red (CR) dyes. With a minimal adsorbent dosage (1 mg) and minimum contact time (10 min), and under different pH conditions, adsorption was efficient and cost-effective (nearly 99, 91 and 88% for BG, MG and CR, respectively). The maximum adsorption capacities of OPL-based CNSs for BG were 500 and 104.16 mg/g for MG and 25.77 mg/g for CR. Adsorption isotherms (Freundlich, Langmuir and Temkin) and kinetics models (pseudo-first-order, pseudo-second-order and Elovich) for the adsorption processes of all three dyes on the CNSs were explored in detail. BG and CR adsorption the Freundlich isotherm best, while MG showed a best fit to the Temkin model. Adsorption kinetics of all three dyes followed a pseudo-second-order model. A reusability study was conducted to evaluate the effectiveness of CNSs in removing the MG dye and showed ~92% efficiency even after several cycles. Highly efficient CNSs with surface oxygen groups and speedy removal of organic dyes within 10 min by CNSs are highlighted in this paper.

Potential of nanocomposites of zero valent copper and magnetite with Eleocharis dulcis biochar for packed column and batch scale removal of Congo red dye

The current study is the first attempt to prepare nanocomposites of Eleocharis dulcis biochar (EDB) with nano zero-valent Copper (nZVCu/EDB) and magnetite nanoparticles (MNPs/EDB) for batch and column scale sequestration of Congo Red dye (CR) from synthetic and natural water. The adsorbents were characterized with advanced analytical techniques. The impact of EDB, MNPs/EDB and nZVCu/EDB dosage (1-4 g/L), pH (4-10), initial concentration of CR (20-500 mg/L), interaction time (180 min) and material type to remove CR from water was examined at ambient temperature. The CR removal followed sequence of nZVCu/EDB > MNPs/EDB > EDB (84.9-98% > 77-95% > 69.5-93%) at dosage 2 g/L when CR concentration was increased from 20 to 500 mg/L. The MNPs/EDB and nZVCu/EDB showed 10.9% and 20.1% higher CR removal than EDB. The adsorption capacity of nZVCu/EDB, MNPs/EDB and EDB was 212, 193 and 174 mg/g, respectively. Freundlich model proved more suitable for sorption experiments while pseudo 2nd order kinetic model well explained the adsorption kinetics. Fixed bed column scale results revealed excellent retention of CR (99%) even at 500 mg/L till 2 h when packed column was filled with 3.0 g nZVCu/EDB, MNPs/EDB and EDB. These results revealed that nanocomposites with biochar can be applied efficiently for the decontamination of CR contaminated water.

Synthesis of ternary-based visible light nano-photocatalyst for decontamination of organic dyes-loaded wastewater

The release of dyes-loaded wastewater from various industries is a major threat to human beings due to their health hazard effects. Ternary ferrites-based visible light photocatalyst Fe₂Zn_0.5Cu_0.5 O₄-CM (CZF-CM) was formed via the co-precipitation method. These prepared ternary ferrites nanoparticles Fe₂Zn_0.5Cu_0.5O₄ (CZF-NPs) and photocatalyst (CZF-CM) were analyzed using different spectroscopic techniques. The average crystallite size of CZF-NPs was calculated from XRD data using Scherer's equation and found to be 12 nm. The elemental composition of the synthesized ternary ferrites nanoparticles (CZF-NPs) was defined by the EDX images. The morphology of CZF-CM photocatalyst is spherical, having a smooth surface and average microspheres size of 810 μm based on SEM micrographs. The photocatalyst has bandgap of 2.57 eV, which lies in the visible range of the electromagnetic spectrum derived by extrapolating Tauc's plot. Photocatalyst CZF-CM showed 94% degradation efficiency for Rhodamine B (RB) dye at optimized conditions of initial dye concentration, catalyst dosage, pH and sunlight irradiation contact time as 40 ppm, 0.7 g, pH 8 and 125 min, respectively. Maximum degradation (96%) of methyl orange (MO) dye occurred at pH 6, at similar optimized conditions as the RB dye. The binary ferrites photocatalyst Fe₂CuO₄-CM (CF-CM) and Fe₂ZnO₄-CM (ZF-CM) of the selected metals showed lesser photocatalytic efficiency than ternary ferrites. An artificial neural network in addition to the response surface methodology was used for the optimization process. The artificial neural network is highly in agreement with the experimental results obtained for the selected dyes. The corresponding predicted response for each data set from ANOVA showed high R², R²_adj, and R²_pred values for the proposed model. It also indicates that contributing parameters in the model are significant due to having very high F-values and low p-values. It is concluded that the synthesized photocatalysts are considered an efficient entrant for the decolorization of industrial wastewater.

Synthesis and characterization of ZnO decorated reduced graphene oxide (ZnO-rGO) and evaluation of its photocatalytic activity toward photodegradation of methylene blue

Photocatalytic treatment is one of the techniques used for the treatment of dyes-contaminated wastewater. It is important to develop an effective visible-light-driven catalyst for the treatment of dyes-contaminated wastewater. This study reports the synthesis of ZnO-reduced graphene oxide catalyst for the degradation of methylene blue. Graphene oxide was prepared by Hammer and Offeman process, while ZnO-rGO (1:1) was prepared by the chemical reduction method. The prepared ZnO-rGO composite was characterized by XRD, TEM, SEM, UV-Vis, DRS, N₂ adsorption-desorption, FTIR, and XPS analyses. The photocatalytic activity was evaluated by photodegradation of methylene blue solution under irradiation. It was found that ZnO-rGO is capable of removing the dye from water and achieved the highest dye degradation efficiency of ~99% within 60 min. Furthermore, the ZnO-rGO was recycled in degradation experiments without any loss in its catalytic performance. The reaction kinetics was described in terms of the Langmuir-Hinshelwood mechanism, one of the kinetics mechanisms of surface catalyzed reaction. 36.2 and 13.1 kJ/mol were calculated as the apparent and true activation energy for photodegradation of methylene blue respectively.

Alkali assisted hydrophobic reinforcement of coconut fiber for enhanced removal of cationic dyes: equilibrium, kinetics, and thermodynamic insight

The present study illustrates enhanced removal of methylene blue (MB) and malachite green (MG) from water using alkali-activated coconut fiber (ACF) as adsorbent. Alkali activation effectively reduces the lignocellulosic components present within coco-fiber which in turn reinforces the coco-fiber to become more water-stable. The material was characterized by FTIR, SEM-EDS, BET, XRD, and pH_ZPC. BET surface area was found to be 10.901 m² g^-1, whereas pH_ZPC of the material is 6.05. FESEM images reveal rod-like morphology. Batch experiments were optimized with respect to contact time (0-120 min), temperature (288-308 K), pH (3-10), dose (1-5 g) and input dye concentration (10-50 mg L^-1). The maximum adsorption coefficient was found to be 133.11 and 110.74 mg g^-1 for MB and MG respectively. Adsorptions are best described by pseudo-second-order kinetics (k_MB = 1.712, R² = 0.999; k_MG = 1.399, R² = 0.999) and Langmuir isotherm model (R² = 0.999). Thermodynamic data suggests a spontaneous (ΔG, -14 kJ mol^-1) and feasible process. Spent material could be regenerated by using 0.5 M HCl. Up to 50% retention of activities was seen after five cycles. It can be concluded that alkali-activated coconut fiber is an economic and sustainable choice for dye removal. Novelty statement: Spent coconut was converted into an effective biosorbent by simple alkali activation under ambient conditions to increase the hydrophobicity of the fibers by reducing the lignocellulosic components. Two cationic dyes; methylene blue and malachite green have been efficiently removed with adsorption capacities of 133.11 and 110.74 mg g^-1. The operation is simple, economically viable, and partially fulfills the principles of green engineering. Comparing with contemporary adsorbents, this material offers higher adsorption capacities with multi-cycle reusability and enhanced water stability.

Green synthesis of Fe nanoparticles by using Mangifera indica extract and its application in photo-catalytic degradation of dyes

An exceedingly facile green approach that produces a reliable adsorbent based on a transition metal such as Iron (Fe) using Mangifera indica leaf extract at room temperature is described. A single pot method was used for synthesis with no capping agents, surfactants or other templates. The main intention of this study is to synthesize iron nanoparticles from leaf extract (Mangifera indica) and examine its degradation potential for photo-catalytic removal of dyes (Congo red and brilliant green) from wastewater. Characterization of synthesized nanoparticles was executed by pH_pzc, scanning electron microscopy and Fourier transform infrared spectroscopy studies and results confirm the presence of iron nano-sheets with biomolecules. All photo-catalytic experimental results were assessed by sum of squared estimate of errors and simple linear regression R² with dye concentration, pH, contact time and dose rate as dependent and independent variables. Adsorption experimental data was verified by kinetics and isothermal models. Results showed that Langmuir and pseudo second order models give best fitness towards the photo-catalytic adsorption procedure. Thermodynamics revealed that adsorption mechanism is endothermic, described by the values of changes in Gibbs free energy, enthalpy and entropy, and is chemisorption in nature, with spontaneous processes. Overall photo-catalytic adsorption execution with synthesized iron nanoparticles and simple biomass of Mangifera indica gives satisfactory results for treating dye wastewater.

Coconut shell derived ZnCl2 activated carbon for malachite green dye removal

The coconut-based agricultural wastes have gained wide attention as an alternative adsorbent for the removal of diverse pollutants from the industrial effluents. This paper presents the zinc chloride activation of adsorbent carbon and the utilization as an adsorbent for the removal of malachite green dye from aqueous solution. The characterisation of activated carbon was performed to get an insight into the adsorption mechanism. The ZnCl₂ activated carbon acquired a higher specific surface area (544.66 m² g^-1) and stability (-32.6 mV). The impact of process parameters including contact time (20-220 min) and initial dye concentration (20-80 mg L^-1) were evaluated on the effectiveness of activated carbon for dye removal. The results concluded that zinc chloride activated carbon showed a significant dye adsorption (39.683 mg g^-1) at an initial concentration of 20 mg L^-1 after 3 hours. Based on the correlation coefficient (R²), the Freundlich isotherm model (0.978-0.998) was best fitted for the experimental data followed by the intraparticle diffusion model (0.88-0.929) as the most appropriate model for malachite green dye removal. Additionally, the energy and thermogravimetric analysis portrayed the suitability of the carbon material to be used as an energy alternative to coal.

Synthesis, characterization and application of novel MnO and CuO impregnated biochar composites to sequester arsenic (As) from water: Modeling, thermodynamics and reusability

The present study aimed at enhancing the adsorption potential of novel nanocomposites of Sesbania bispinosa biochar (SBC) with copper oxide (SBC/CuO) and manganese oxide nanoparticles (SBC/MnO) for the efficient and inexpensive removal of environmentally concerned contaminant arsenic (As) from contaminated water at batch scale. The scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, energy dispersive X-ray (EDX), X-ray diffraction (XRD) and point of zero charge (PZC) analyses proved successful impregnation of the metallic nanoparticles on SBC surface. The results revealed the maximum As removal (96 %) and adsorption (12.47 mg/g) by SBC/CuO composite at 10 mg As/L, optimum pH-4, dose 1.0 g/L and ambient temperature (25 ± 1.5 °C) as compared with SBC (7.33 mg/g) and SBC/MnO (7.34 mg/g). Among four types of adsorption isotherms, Freundlich isotherm demonstrated best fit with R² > 0.997. While pseudo second-order kinetic model revealed better agreement with kinetic experimental data as matched with other kinetic models. The thermodynamic results depicted that As adsorption on the as-synthesized adsorbents was endothermic and spontaneous in nature with increased randomness. The SBC/CuO displayed excellent reusability and stability over four adsorption/desorption cycles and proved that the as-synthesized SBC/CuO composite may be the efficient adsorbent for practical removal of As from contaminated water.

Brilliant Green Dye Biosorption Using Activated Carbon Derived from Guava Tree Wood

The removal of brilliant green (BG) dye from an aqueous solution using activated carbon (AC) derived from guava tree wood is conducted in batch conditions. The influence of different factors such as contact time, pH, adsorbent dosage, initial dye concentration, and temperature on the adsorption of BG onto AC was investigated. FTIR, BET, and SEM analyses were performed to determine the characteristics of the material. The isotherm results were analyzed using the Langmuir, Freundlich, Temkin, and Dubinin–Radushkevich isotherms. Linear regression was used to fit the experimental data. It was found that the equilibrium data are best represented by the Freundlich isotherm, and the adsorption capacity (qe) was 90 mg dye/g AC. The values of the free energy (∆G), enthalpy (∆H), and entropy (∆S) were −86.188 kJ/mol, 43.025 kJ/mol, and 128 J/mol.K, respectively, at pH 7 for the BG dye. The kinetics of BG dye adsorption were analyzed using pseudo-first-order and pseudo-second-order models, and it was found that the pseudo-second-order model was suitable for the behavior of the BG dye at R2 = 0.999.

Effect of biochar modified with magnetite nanoparticles and HNO3 for efficient removal of Cr(VI) from contaminated water: A batch and column scale study

Chromium (Cr) poses serious consequences on human and animal health due to its potential carcinogenicity. The present study aims at preparing a novel biochar derived from Chenopodium quinoa crop residues (QBC), its activation with magnetite nanoparticles (QBC/MNPs) and strong acid HNO₃ (QBC/Acid) to evaluate their batch and column scale potential to remove Cr (VI) from polluted water. The QBC, QBC/MNPs and QBC/Acid were characterized with SEM, FTIR, EDX, XRD as well as point of zero charge (PZC) to get an insight into their adsorption mechanism. The impact of different process parameters including dose of the adsorbent (1-4 g/L), contact time (0-180 min), initial concentration of Cr (25-200 mg/L) as well as solution pH (2-8) was evaluated on the Cr (VI) removal from contaminated water. The results revealed that QBC/MNPs proved more effective (73.35-93.62-%) for the Cr (VI) removal with 77.35 mg/g adsorption capacity as compared with QBC/Acid (55.85-79.8%) and QBC (48.85-75.28-%) when Cr concentration was changed from 200 to 25 mg/L. The isothermal experimental results follow the Freundlich adsorption model rather than Langmuir, Temkin and Dubinin-Radushkevich adsorption isotherm models. While kinetic adsorption results were well demonstrated by pseudo second order kinetic model. Column scale experiments conducted at steady state exhibited excellent retention of Cr (VI) by QBC, QBC/MNPs and QBC/Acid at 50 and 100 mg Cr/L. The results showed that this novel biochar (QBC) and its modified forms (QBC/Acid and QBC/MNPs) are applicable with excellent reusability and stability under acidic conditions for the practical treatment of Cr (VI) contaminated water.

Gold Nanoparticles and Nanorods in Nuclear Medicine: A Mini Review

In the last decade, many innovative nanodrugs have been developed, as well as many nanoradiocompounds that show amazing features in nuclear imaging and/or radiometabolic therapy. Their potential uses offer a wide range of possibilities. It can be possible to develop nondimensional systems of existing radiopharmaceuticals or build engineered systems that combine a nanoparticle with the radiopharmaceutical, a tracer, and a target molecule, and still develop selective nanodetection systems. This review focuses on recent advances regarding the use of gold nanoparticles and nanorods in nuclear medicine. The up-to-date advancements will be shown concerning preparations with special attention on the dimensions and functionalizations that are most used to attain an enhanced performance of gold engineered nanomaterials. Many ideas are offered regarding recent in vitro and in vivo studies. Finally, the recent clinical trials and applications are discussed.