Effective adsorption of bisphenol A from aqueous solution over a novel mesoporous carbonized material based on spent bleaching earth

Electrostatic field as an emergent technology in refining crude oils: a review

Vegetable oils and fatty acid esters (FAEs) are commonly used in various industrial and commercial applications. However, the presence of contaminants in these oils can severely affect their functionality and suitability. Conventional refining techniques for vegetable oils typically involve degumming, neutralization, bleaching and deodorization. Meanwhile, refining of FAEs often utilize wet or dry washing processes. These are often resource-intensive, producing substantial waste products, causing neutral oil loss, and can also result in the loss of micronutrients. To address these challenges, researchers have explored the use of nano-adsorbents and electrostatic field (E-field) technologies as alternatives in purifying industrial dielectric oils by removing polar particles and contaminants. Nano-adsorbents demonstrated increased efficiency in removing polar contamination while minimizing neutral oil loss. However, removal of these spent adsorbents can be challenging due to their nano-size, and physicochemical properties. The use of these materials combined with E-field technologies offers a novel and sustainable solution for removing spent nano-adsorbents and contaminants. This review provides an overview of current traditional and novel refining technologies for vegetable oils and FAEs, including their associated limitations. Compared to conventional methods, E-field treatment offers several advantages, making it an attractive alternative to conventional approaches in food processing and oil refining.

Statistical physics modeling study of an environmentally friendly and efficient adsorbent derived from the brown macroalgae Bifurcaria bifurcata for the removal of Bisphenol A

The brown macroalgae Bifurcaria bifurcata was valued and used to develop a carbonaceous material activated by H2SO4 (AC-BB@H2SO4), with the goal of assessing its adsorption ability against Bisphenol A (BPA). During the adsorption experiments, the effects of the adsorbent dose, solution pH, and contact time were examined, and the results were m = 0.4 g/L, pH = 8.3, and t = 120 min, with an elimination yield of 91.6 %. With comparatively high R2 values, the pseudo-second-order kinetic model perfectly fitted the experimental data. Langmuir's model was found to be the best appropriate for describing the adsorption equilibrium of BPA on AC-BB@H2SO4. The thermodynamic findings show that BPA adsorption on AC-BB@H2SO4 was spontaneous, favorable, and endothermic in nature. Even after six cycles of reuse, regeneration testing demonstrated that our adsorbent could eliminate BPA by >50 %. The BPA adsorption mechanism's statistical physics control parameters were determined and analyzed. BPA's adsorption energies were <40 kJ/mol, indicating that the interactions between BPA and AC-BB@H2SO4 were governed by physical forces (i.e., hydrogen bonding and van der Waals and electrostatic interactions). All of these intriguing findings indicate that our carbonaceous material might have direct ramifications in the field of wastewater treatment, notably for the clearance of BPA, which is difficult to biodegrade.

A Novel Adsorbent of Attapulgite & Carbon Composites Derived from Spent Bleaching Earth for Synergistic Removal of Copper and Tetracycline in Water

Simultaneously eliminating tetracycline (TC) and copper (Cu-II) from wastewater was investigated by applying a novel adsorbent fabricated by transforming spent bleaching earth (SBE) into attapulgite & carbon composites (A&Cs). Pyrolysis temperature for A&Cs preparation exhibited a positive effect on Cu(II) adsorption, while the AC500 possessed the greatest performance for TC remediation. Interestingly, a synergistic effect instead of competitive adsorption occurred between Cu(II) and TC under the combined binary system, as both TC and Cu(II) adsorption amount on A&C500 increased more than that in the single system, which could be mainly attributed to the bridge actions between the TC and Cu(II). In addition, hydrogen bonding, ᴨ-ᴨ EDA interaction, pore-filling and complexation exerted significant roles in the adsorption process of TC and Cu(II). In general, this study offered a new perspective on the regeneration of livestock and poultry industry wastewater polluted with antibiotics and heavy metals.