Morphological influence of BiVO4 nanostructures on peroxymonosulfate activation for highly efficient catalytic degradation of rhodamine B

Facet-Dependent Fe2O3/BiVO4(110)/BiVO4(010)/Fe2O3 Dual S-Scheme Photocatalyst as an Efficient Visible-Light-Driven Peroxymonosulfate Activator for Norfloxacin Degradation

A lack of eco-friendly, highly active photocatalyst for peroxymonosulfate (PMS) activation and unclear environmental risks are significant challenges. Herein, we developed a double S-scheme Fe2O3/BiVO4(110)/BiVO4(010)/Fe2O3 photocatalyst to activate PMS and investigated its impact on wheat seed germination. We observed an improvement in charge separation by depositing Fe2O3 on the (010) and (110) surfaces of BiVO4. This enhancement is attributed to the formation of a dual S-scheme charge transfer mechanism at the interfaces of Fe2O3/BiVO4(110) and BiVO4(010)/Fe2O3. By introducing PMS into the system, photogenerated electrons effectively activate PMS, generating reactive oxygen species (ROS) such as hydroxyl radicals (·OH) and sulfate radicals (SO4·-). Among the tested systems, the 20% Fe2O3/BiVO4/Vis/PMS system exhibits the highest catalytic efficiency for norfloxacin (NOR) removal, reaching 95% in 40 min. This is twice the catalytic efficiency of the Fe2O3/BiVO4/PMS system, 1.8 times that of the Fe2O3/BiVO4 system, and 5 times that of the BiVO4 system. Seed germination experiments revealed that Fe2O3/BiVO4 heterojunction was beneficial for wheat seed germination, while PMS had a significant negative effect. This study provides valuable insights into the development of efficient and sustainable photocatalytic systems for the removal of organic pollutants from wastewater.

Alginate@ZnCO2O4 for efficient peroxymonosulfate activation towards effective rhodamine B degradation: optimization using response surface methodology

A facile chemical procedure was utilized to produce an effective peroxy-monosulfate (PMS) activator, namely ZnCo₂O₄/alginate. To enhance the degradation efficiency of Rhodamine B (RhB), a novel response surface methodology (RSM) based on the Box-Behnken Design (BBD) method was employed. Physical and chemical properties of each catalyst (ZnCo₂O₄ and ZnCo₂O₄/alginate) were characterized using several techniques, such as FTIR, TGA, XRD, SEM, and TEM. By employing BBD-RSM with a quadratic statistical model and ANOVA analysis, the optimal conditions for RhB decomposition were mathematically determined, based on four parameters including catalyst dose, PMS dose, RhB concentration, and reaction time. The optimal conditions were achieved at a PMS dose of 1 g l^-1, a catalyst dose of 1 g l^-1, a dye concentration of 25 mg l^-1, and a time of 40 min, with a RhB decomposition efficacy of 98%. The ZnCo₂O₄/alginate catalyst displayed remarkable stability and reusability, as demonstrated by recycling tests. Additionally, quenching tests confirmed that SO₄˙^-/OH˙ radicals played a crucial role in the RhB decomposition process.

Degradation of Textile Dye by Bimetallic Oxide Activated Peroxymonosulphate Process

The sulphate radical based advanced oxidation processes (AOPs) are highly in demand these days, owing to their numerous advantages. Herein, the Fe-Mn bimetallic oxide particle was used to activate peroxymonosulphate (PMS) for Rhodamine B (RhB) degradation. Three bimetallic catalysts were synthesized via the chemical precipitation method with different concentrations of metals; Fe-Mn (1:1), Fe-Mn (1:2) and Fe-Mn (2:1). The best performance was shown by Fe-Mn (2:1) system at optimized conditions; 96% of RhB was removed at optimized conditions. Scavenging experiments displayed the clear dominance of hydroxyl radical in pH 3, while sulphate radical was present in a large amount at pH 7 and 10. The monometallic Fe and Mn oxides were also synthesized to confirm the synergistic effect that was present in the bimetallic oxide system. The application of optimized condition in real textile wastewater was conducted, which revealed the system works efficiently at high concentrations of PMS and catalyst dosage.

State-of-the-Art on the Sulfate Radical-Advanced Oxidation Coupled with Nanomaterials: Biological and Environmental Applications

Sulfate radicals (SO₄^-·) play important biological roles in biomedical and environmental engineering, such as antimicrobial, antitumor, and disinfection. Compared with other common free radicals, it has the advantages of a longer half-life and higher oxidation potential, which could bring unexpected effects. These properties have prompted researchers to make great contributions to biology and environmental engineering by exploiting their properties. Peroxymonosulfate (PMS) and peroxydisulfate (PDS) are the main raw materials for SO₄^-· formation. Due to the remarkable progress in nanotechnology, a large number of nanomaterials have been explored that can efficiently activate PMS/PDS, which have been used to generate SO₄^-· for biological applications. Based on the superior properties and application potential of SO₄^-·, it is of great significance to review its chemical mechanism, biological effect, and application field. Therefore, in this review, we summarize the latest design of nanomaterials that can effectually activate PMS/PDS to create SO₄^-·, including metal-based nanomaterials, metal-free nanomaterials, and nanocomposites. Furthermore, we discuss the underlying mechanism of the activation of PMS/PDS using these nanomaterials and the application of SO₄^-· in the fields of environmental remediation and biomedicine, liberating the application potential of SO₄^-·. Finally, this review provides the existing problems and prospects of nanomaterials being used to generate SO₄^-· in the future, providing new ideas and possibilities for the development of biomedicine and environmental remediation.

Morphological guided sphere to dendrite BiVO4 for highly efficient organic pollutant removal and photoelectrochemical performance under solar light

Monoclinic BiVO₄ (m-BiVO₄) has been reported as promising phase for solar light driven photocatalysis. However, in the case of morphology guided BiVO₄ with different synthetic conditions maintaining the m-BiVO₄ phase remains a substantial challenge for achieving an efficient photocatalyst driven by solar light. Herein, a simple hydrothermal approach was used to produce well-defined template free m-BiVO₄ dendrites with distinct branches for photo catalytically removal of organic pollutant and photocurrent generation. The development of monoclinic dendrite BiVO₄ was confirmed after comprehensive structural, morphological, and optical examinations. FE-SEM images of m-BiVO₄ revealed transformation of spherical to dendritic morphology with distinct branches by simply changing the HNO₃ to NaOH ratios from 2:1 to 2:2, which are named as BVO 2-1 and BVO 2-2, respectively. The BVO 2-2 dendrites exhibited improved activity of 98% towards methylene blue (MB) photodegradation upon simulated solar light irradiation. The BVO 2-2 dendrites photoelectrode showed an outstanding photocurrent density of 1.4245 mAcm^-2 than that of the BVO 2-1 spherical photoelectrode (0.7367 mAcm^-2). Enhanced photocatalytic and photoelectrochemical action, could be ascribed to the unique morphological changes provides photoactive sites, harvest more light utilization together with higher separation of e^-/h⁺ pairs. Furthermore, photocatalytic mechanism is investigated based on scavenger trapping agent, valence band XPS, UV Visible DRS and PL study. Our findings could pave the way for the development of dendritic nanostructure photocatalysts with improved photocatalytic activity.

Magnetic graphene oxide for methylene blue removal: adsorption performance and comparison of regeneration methods

A series of Fe₃O₄-graphene oxide (GO) composite materials (MGOs) with abundant surface area, rich oxygen-containing functional groups, and magnetic properties were prepared in a facile coprecipitation method and then employed for the adsorptive removal of methylene blue (MB) from water. The kinetic data were better fitted in the pseudo-second-order model than in the pseudo-first-order model, and the intraparticle diffusion model revealed the two-step diffusion process including diffusion in the boundary layer and in the porous structures. The maximum adsorption amounts of MB were calculated to be 37.5-108 mg/g at 25 °C and pH 9 using the Langmuir isotherm model. Thermodynamic study showed that the adsorption process was spontaneous, with ΔH° of 23.0-49.6 kJ/mol and ΔS° of 131-249 J∙mol^-1∙K^-1. The adsorption amount of MB increased with pH in the range of 4-10. Inorganic ions including Na⁺ and Ca²⁺ suppressed the adsorption of MB, and the more pronounced impact of Ca²⁺ was ascribed to its higher valence state. The cetyltrimethylammonium bromide (CTAB) surfactant showed a stronger inhibitory effect than Ca²⁺. The adsorption mechanism was proposed to be a combination of electrostatic interactions, hydrophobic adsorption, and electron donor-acceptor interactions. Two methods were used for the regeneration of spent MGO, and the results showed that the peroxomonosulfate (PMS) oxidation method was more favorable than the acid washing method, considering the better regeneration ability and lower amount of washing water used. Finally, the reaction mechanism of PMS oxidation was analyzed based on quenching tests and in situ open circuit potential measurements, which proved that OH and ¹O₂ played dominant roles and that the fine adsorption ability of MGO promoted the reaction between them and MB.