NaHCO3 activated sludge-derived biochar by KMnO4 modification for Cd(II) removal from aqueous solutions

Removal of Cr(vi) in wastewater by Fe-Mn oxide loaded sludge biochar

Sludge biochar loaded with Fe-Mn oxides (FMBC) was prepared and employed to remove Cr(vi) from wastewater. The influences of solution pH, co-existing ion, contact time, adsorption temperature and Cd(vi) concentrations on removing Cr(vi) by FMBC were investigated. The Cr(vi) adsorption on FMBC had strong pH dependence. Additionally, Na+, Mg2+, Ca2+, SiO32-, NO3- and Cl- ions exhibited no influence on Cr(vi) removal efficiency for FMBC, whereas there were inhibition effects of Pb2+, Cu2+, Ni2+, CO32-, SO42-, and PO43- on removing Cr(vi). The Cr(vi) adsorption from solution for FMBC was well described by models of pseudo-second-order and Langmuir, and the largest Cr(vi) removal capacity of FMBC reached 172.3 mg g-1. FMBC had good capacity for treating electroplating wastewater and mineral dissolving wastewater containing Cr(vi). After five regenerations, the 50 and 5 mg L-1 Cr(vi) removing efficiency of FMBC was 82.34% and 97.68%, respectively. The Cr(vi) removal for FMBC involved adsorption-reduction and re-adsorption of Cr(iii) generated by reduction. These results indicated that FMBC has good prospects for remediating Cr(vi)-containing wastewater.

Sodium hydroxide/magnesium chloride multistage activated sludge biochar: interfacial chemical behavior and Cd(II) adsorption performance

To enhance the adsorption performance of municipal sludge biochar on Cd(II), modified sludge biochar was prepared by sodium hydroxide/magnesium chloride (NaOH/MgCl2) graded activation, and the Cd(II) adsorption performance on sludge biochar (BC), NaOH-activated sludge biochar (NBC) and NaOH/MgCl2 activated sludge biochar (NBC-Mg) was investigated. The results showed that NaOH/MgCl2 graded activation upgraded the surface structure and enhanced the graphitization of sludge biochar. The adsorption experiments indicated that the adsorption kinetic and adsorption isotherm for Cd(II) were in accordance with the pseudo second-order kinetic and Langmuir model. The adsorption capacity of NBC-Mg (143.49 mg/g) for Cd(II) was higher than that of BC (50.40 mg/g) and NBC (85.20 mg/g). The mechanism of Cd(II) adsorption included ion exchange, complexation, cation-π interaction, and mineral precipitation. After five regeneration, the removal efficiency of Cd(II) by NBC-Mg remained above 90%. This work indicated that sludge biochar prepared by multistage activation could be an effective material for Cd-containing wastewater treatment.

Application of common industrial solid waste in water treatment: a review

Industrial solid waste has a wide range of impacts, and it is directly or indirectly related to land, atmosphere, water, and other resources. Industrial solid waste has a large amount of production, complex and diverse components and contains a variety of harmful substances. However, as industrial by-products, it also has a lot of available value. Industrial solid waste has been continuously studied in water treatment due to its special composition and porous and loose structure. It is known that there are few reviews of various industrial solid wastes in the field of wastewater treatment, and most of them only discuss single industrial solid waste. This paper aims to sort out the different studies on various solid wastes such as fly ash, red mud, wastewater sludge, blast furnace slag and steel slag in dyeing, heavy metal, and phosphorus-containing wastewater. Based on the modification of industrial solid waste and the preparation of composite materials, adsorbents, coagulants, catalysts, filtration membranes, geological polymers, and other materials with high adsorption properties for pollutants in wastewater were formed; the prospect and development of these materials in the field of wastewater were discussed, which provides some ideas for the mutual balance of environment and society. Meanwhile, some limitations of solid waste applications for wastewater treatment have been put forward, such as a lack of further researches about environment-friendly modification methods, application costs, the heavy metal leaching, and toxicity assessment of industrial solid waste.

Mitigation of Cd(II) contamination in aqueous solution and soil by multifunctional hydroxyapatite/sludge biochar composite

Biochar with well-developed pore structure is an ideal carrier for easily agglomerated hydroxyapatite (HAP). Hence, a novel multifunctional hydroxyapatite/sludge biochar composite (HAP@BC) was synthesized by chemical precipitation method and used for mitigating Cd(II) contamination form aqueous solution/soil. Compared to sludge biochar (BC), HAP@BC exhibited rougher and more porous surface. Meanwhile, the HAP was dispersed on the sludge biochar surface, which reduced the agglomeration of HAP. The adsorption performance of HAP@BC on Cd(II) was better than that of BC under the influence of different single-factor batch adsorption experiments. Moreover, the Cd(II) adsorption behavior by BC and HAP@BC was uniform monolayer adsorption, and this reaction process was endothermic and spontaneous. The Cd(II) maximum adsorption capacities of BC and HAP@BC were 79.96 and 190.72 mg/g at 298 K, respectively. Moreover, the Cd(II) adsorption mechanism on BC and HAP@BC included complexation, ion exchange, dissolution-precipitation and Cd(II)-π interaction. According to the semi-quantitative analysis, ion exchange was the main mechanism for Cd(II) removal by HAP@BC. Notably, HAP played a role in the Cd(II) removal by dissolution-precipitation and ion exchange. This result suggested that there was a synergistic effect between HAP and sludge biochar for the Cd(II) removal. HAP@BC reduced the leaching toxicity of Cd(II) in soil better than BC, indicating that the HAP@BC was able to mitigate Cd(II) contamination in soil more effectively. This work demonstrated that sludge biochar was an ideal carrier for dispersed HAP and provided an effective HAP/biochar composite for the mitigation of Cd(II) contamination in aqueous solution/soil.

The performance of temperature and acid-modified sludge in removing lead and cadmium

In the present study, the aluminum-containing wastewater treatment residue was modified at 400 °C and 2.5 mol/L HCl and used in the removal of Pb and Cd from an aqueous solution for the first time. The modified sludge was characterized by SEM, XRD, FTIR, and BET. Under the optimized conditions, including pH 6, adsorbent dose 3 g/L, Pb/Cd reaction time 120 and 180 min, and Pb/Cd concentration 400 and 100 mg/L, Pb/Cd adsorption capacity was obtained as 90.72 and 21.39 mg/g, respectively. The adsorption process of sludge before and after modification is more consistent with the quasi-second-order kinetics, and the correlation coefficients R² are all above 0.99. The fitting of data with the Langmuir isotherm and pseudo-second-order kinetics showed that the adsorption process is monolayer and chemical in nature. The adsorption reaction included ion exchange, electrostatic interaction, surface complexation, cation-π interaction, co-precipitation, and physical adsorption. This work implies that the modified sludge has greater potential in the removal of Pb and Cd from wastewater relative to raw sludge.