Enhanced proton conductivity of Mo154-based porous inorganic framework

Giant {Mo132} polyoxometalate isolated with diverse organic cations: a systematic proton conductivity study

The development of efficient and stable proton conductors is a pivotal area of research due to their transformative potential in alternative energy technologies. Recently, there has been a surge of interest in synthesizing proton conductors based on polyoxometalate (POM) materials, attributed to their highly negatively charged and oxygen-rich surfaces. In this study, we report on a highly water-soluble giant POM, (NH4)42[Mo132O372(CH3COO)30(H2O)72]·ca.300H2O·ca.10CH3COONH4 (designated as {Mo132}), which was rendered insoluble in water by exchanging its ammonium cations with larger organic cations, specifically histidinium, pyridinium, bipyridinium, and methyl viologen, resulting in His-Mo132, Py-Mo132, Bpy-Mo132 and MV-Mo132, respectively. These ion-exchanged compounds were thoroughly characterized through comprehensive spectral analyses, elemental analyses and microscopic studies. The substitution with organic cations containing nitrogen centres not only rendered {Mo132} insoluble, but also increased the number of proton hopping sites, thereby enhancing proton transport. Consequently, His-Mo132, Py-Mo132, Bpy-Mo132 and MV-Mo132 demonstrated impressive proton conductivity. Among these, Py-Mo132 stood out with a proton conductivity of 1.07 × 10-2 S cm-1 under 98% relative humidity at 80 °C. All four compounds exhibited proton conduction predominantly via the Grotthuss mechanism. Furthermore, stability assessments of these Mo132-based proton conductors were conducted under operational conditions to evaluate their performance in practical applications.

Assembly of the Skirt-Like Giant Molybdenum Blue Cluster {Mo158} from Dimerization of {Mo79} Featuring an Octameric Skeleton

Cyclic compounds are appealing owing to their intrinsic porous structures and facile accessibility as building blocks (BBs) for fabricating high-order assemblies. Nevertheless, the modular synthesis of such molecular entities and their subsequent controlled assembly are still very challenging. Herein, we report the synthesis of a gigantic molybdenum blue (MB) wheel {Mo158} (1), featuring a skirt-shaped structure dimerized from {Mo79}. {Mo79} exhibits an unprecedented octameric architecture built from eight sets of {Mo8} BBs, and the controlled assembly of this smallest member in the MB library is achieved by proper wheel contraction induced by {Mo1} and edge-sharing {Mo2} BBs. Moreover, {Mo158} can function as a 4-connected giant synthon, connecting with adjacent four clusters in a controlled manner via four Mo-O-Mo bridges, resulting in a high-order architecture with a 2D layer structure. In addition to single-crystal X-ray diffraction, {Mo158} is fully characterized by a variety of spectroscopies, allowing for the unambiguous determination of its structure and formula. This work not only enriches the family of gigantic clusters but also demonstrates their potential for constructing more complex assemblies.

A Two-Dimensional Layered Heteropolyoxoniobate Based on Cubic Sn(IV)-Containing {Sn12Nb56O200} Cages with Good Proton Conductivity Property

The first example of a Sn(IV)-containing heteropolyoxoniobate K6H18[Cu(en)2]8{[Sn(OH)2]12 (HNb7O22)8}·2en·88H2O (1) is built from nanoscale high-nuclearity cubic {[Sn(OH)2]12(HNb7O22)8} cluster and [Cu(en)2]2+ complexes. The cubic {[Sn(OH)2]12(HNb7O22)8} cage is composed of eight {Nb7O22} clusters and 12 SnO6 octahedrons. The eight {Nb7O22} fragments are situated at the vertices of the cubic cage, while the 12 SnO6 octahedrons are positioned along the edges of the cubic cage. The [Cu(en)2]2+ complexes link the {[Sn(OH)2]12(HNb7O22)8} clusters into two-dimensional (2D) (4,4) grid-like layers. The N-H···O hydrogen bonds between the [Cu(en)2]2+ complexes and the {[Sn(OH)2]12(HNb7O22)8} clusters link the layers to form a 3D supramolecular structure. Compound 1 exhibits a good proton conductivity of 3.1 × 10-2 S cm-1 at 85 °C and 98% relative humidity.

Controllable Synthesis and Ultrahigh Proton Conduction of a Hydrogen-Bond Network

The functionalization of polyoxometalates with organic ligands provides a new-style strategy to accurately incorporate polyoxometalates with advanced functional organic moieties on their surfaces, the development of which has attracted increasing research interest due to the potential applications. A germanium tungstate Na2(H3O)6[{RuIV(bpy)}2{WO2(C2O4)}2(GeW11O39)2]·27H2O (bpy = 2,2'-bipyridine) with two ligands covalently modified was triumphantly synthesized, using the conventional one-pot hydrothermal method. It was systematically characterized by thermogravimetric analysis (TGA), elemental analysis, infrared (IR) spectroscopy, single-crystal X-ray diffraction, X-ray photoelectron spectroscopy (XPS), powder diffraction (PXRD), scanning electronic microscopy (SEM), and ultraviolet-visible (UV-vis) spectroscopy. The two-dimensional (2D) layered structure was established through hydrogen bonding and Na+ bridges. Impedance measurements indicate that it displays outstanding proton conduction properties, with a splendid conductivity up to 1.24 × 10-2 S·cm-1 under 353 K and 90% relative humidity (RH), owing to the rich interlayer hydrogen-bond network formed by the organic ligands ({RuC10H8N2}4+ and {WC2O4}4+), hydrated protons (H3O+), and crystal waters.

A Dawson-type {P4W24} modified using phenylphosphonic acid with excellent proton conductivity

A case of organic-inorganic hybridized phosphotungstate modified using aromatic organophosphonic acid, K4Na4H11[KCo2(H2O)10P4W24O92{(PhPO)2}]·48H2O (1), was successfully synthesized in conventional aqueous solution. The prominent structural feature is that the total structure of [KP4W24O92{(PhPO)2}]23- resembles a V-shaped structure, which was stabilized by two [Co(H2O)5]2+ ions. Furthermore, it can be connected into a three-dimensional mesh structure using K+ ions. Surprisingly, 1 possesses a remarkably high proton conductivity of 1.59 × 10-2 S cm-1 at 95% RH and 318 K probably due to the fact that its structure contains large amounts of lattice water molecules, coordination water molecules and counter cations.

Hybrid Membrane of Sulfonated Poly(aryl ether ketone sulfone) Modified by Molybdenum Clusters with Enhanced Proton Conductivity

Developing novel proton exchange membranes (PEMs) with low cost and superior performance to replace Nafion is of great significance. Polyoxometalate-doped sulfonated poly(aryl ether ketone sulfone) (SPAEKS) allows for the amalgamation of the advantages in each constituent, thereby achieving an optimized performance for the hybrid PEMs. Herein, the hybrid membranes by introducing 2MeIm-{Mo132} into SPAEKS are obtained. Excellent hydrophilic properties of 2MeIm-{Mo132} can help more water molecules be retained in the hybrid membrane, providing abundant carriers for proton transport and proton hopping sites to build successive hydrophilic channels, thus lowering the energy barrier, accelerating the proton migration, and significantly fostering the proton conductivity of hybrid membranes. Especially, SP-2MIMo132-5 exhibits an enhanced proton conductivity of 75 mS cm-1 at 80 °C, which is 82.9% higher than pristine SPAEKS membrane. Additionally, this membrane is suitable for application in proton exchange membrane fuel cells, and a maximum power density of 266.2 mW cm-2 can be achieved at 80 °C, which far exceeds that of pristine SPAEKS membrane (54.6 mW cm-2). This work demonstrates that polyoxometalate-based clusters can serve as excellent proton conduction sites, opening up the choice of proton conduction carriers in hybrid membrane design and providing a novel idea to manufacture high-performance PEMs.

A 3D heteropolyoxoniobate framework based on heart-shaped {Te2Nb19O60} clusters with proton conductivity property

A 3D tellurium-substituted heteropolyoxoniobate framework H5K3Na[Cu(en)2]2[Cu(en)0.75(H2O)2.5]{[(Te2Nb19O58)(μ3-OH)2]}·24H2O (1, en = ethylenediamine) with a 6-connected pcu topology is built from heart-shaped {Te2Nb19O60} clusters and copper complexes. The {Te2Nb19O60} cluster represents the new tellurniobate structure type with a 19-nuclearity Nb cluster. It consists of two new monovacant Lindqvist {Nb5O19} clusters, one boat-shaped {Nb9O32} cluster and two TeO32- anions. The {Te2Nb19O60} polyanions are interlinked by [Cu(en)2]2+ complexes into a 2D (4, 4) grid-like layer containing rhombic sheets. The Cu2+ supports the adjacent layers through Te-O-Cu-O-Te- bonds to form a three-dimensional heteropolyoxoniobate framework with 1D channels. This compound exhibits good chemical and solvent stability and proton conductivity, with a conductivity of 7.9 × 10-3 S cm-1 at 85 °C under 98% RH.

Dual-Proton Conductor for Fuel Cells with Flexible Operational Temperature

The properties of proton conductors determine the operating temperature range of fuel cells. Typically, phosphoric acid (PA) proton conductors exhibit excellent proton conductivity owing to their high proton dissociation and self-diffusion abilities. However, at low temperatures or high current densities, water-induced PA loss causes rapid degradation of cell performance. Maintaining efficient and stable proton conductivity within a flexible temperature range can significantly reduce the start-up temperature of PA-doped proton exchange membrane fuel cells. In this study, a dual-proton conductor composed of an organic phosphonic acid (ethylenediamine tetramethylene phosphonic acid, EDTMPA) and an inorganic PA is developed for proton exchange membranes. The proposed dual-proton conductor can operate within a flexible temperature range of 80-160 °C, benefiting from the strong interaction between EDTMPA and PA, and the enhanced proton dissociation. Fuel cells with the EDTMPA-PA dual-proton conductor showed excellent cell stability at 80 °C. In particular, under the high current density of 1.5 A cm-2 at 160 °C, the voltage decay rate of the fuel cell with the dual-proton conductor is one-thousandth of that of the fuel cell with PA-only proton conductor, indicating excellent stability.

Controlled Assembly of a Dawson-like Antimoniotungstate-Supported Trefoil-type Trimer with Good Proton Conductivity Performance

With the excellent properties of POM in the field of proton conductivity, the preparation of POM-based proton-conductive materials has burst into life. Herein, an unprecedented Sb-templated all-inorganic trimer Na8H18.64[(SbW14O52)3(Sb2W6.12Ru5.88O18)]·85H2O (1), which is based on tetravacant Dawson-like [SbW14O52]17- blocks and exhibits a trefoil type with D3 symmetry, has been successfully designed and synthesized by the assembly of simple materials with a one-pot hydrothermal method under acidic conditions. Also, compound 1 is systematically characterized by single-crystal X-ray diffraction, PXRD, ESI-MS, IR spectroscopy, UV-vis, elemental analysis, and TGA. Crystal structure data analysis demonstrates that compound 1 is constructed by a hexagonal prismatic heterometallic {Sb2W6.12Ru5.88O18} core and three equivalent {SbW14} units bridged through μ2-O atoms in periphery. Subsequently, further property experiments show that compound 1 exhibits high proton conductivity with a conductivity value (σ) of 3.07 × 10-2 S cm-1 at 75 °C and 80% relative humidity (RH). The activation energy of compound 1 evaluated by the Arrhenius plots is 0.22 eV, which indicates that the Grotthuss mechanism is dominant during the process of proton transfer.

A heteropolytungstate based 2D layered porous framework with high proton conductivity

A heteropolytungstate cluster [{Ru2O(bpy)2}2{Bi2W32O110}]10- (bpy = C10H8N2) was incorporated into a 2 : 1 type layered porous framework by interweaving the Na+ bridged cluster chains through the hydrogen bonding ability of the bpy ligands. It features multiple pore channels rich in hydrogen-bond network, contributing high conductivities > 10-2 S cm-1 at 298-358 K and 85% RH.

A Macrocyclic Polyoxomolybdate with Phosphate and Phosphonate Linkers: Synthesis, Structure, and Proton Conductivity

A coordination macrocycle composed of eight identical [PMo8O27]- ({PMo8}) clusters connected by both organic tetraphosphonates and inorganic phosphates, (C3N2H5)29(NH4)6H12[(PMo8O27)8(C10P4O12N2H20)4(PO4)4Cs(Mo4O10(H2O)4)] (C3N2H5+ = imidazolium), is presented here. The primary building block, {PMo8}, is a tetravacant Keggin-type phosphomolybdate that has never been observed before. The compound shows a high proton conductivity of 9.70 × 10-3 S cm-1 at 373 K and 98% relative humidity. Control experiments on an imidazolium-free sample demonstrate the critical role of the imidazolium counterions as mobile proton carriers. The contribution of imidazolium necessitates a high activation energy (Ea = 0.502 eV) for proton conduction via the vehicle mechanism.

Gradual Size Enlargement of Aluminum-Oxo Clusters and the Photochromic Properties

Metallic clusters, assembled by functional motifs, possess the attribute of regulating the properties by changing inorganic and organic components. In this work, a series of aluminum-oxo clusters, [Al₆O(dmp)₄(Hdmp)₂]·2ⁱPrOH [Al₆-1, H₃dmp = 2,2-bis(hydroxymethyl)propionic acid], [Al₆(H₂thmmg)₆]·2DMF·2H₂O [Al₆-2, H₅thmmg = N-tris(hydroxymethyl)methylglycine], [Al₈(OH)₄(NAP-OH)₁₂(MeO)₇(MeOH)]Cl·7MeCN·3MeOH (Al₈, HNAP-OH = 3-hydroxy-2-naphthoic acid), and [Al₁₀(NA)₁₀(MeO)₂₀] (Al₁₀, HNA = nicotinic acid), were obtained based on different carboxylic acids, realizing metallic ring size enlargement from 5.91 to 9.32 Å. They all exhibit good chemical stability. Importantly, the Al₈ cluster displays obvious photochromic behavior from pale yellow to orange yellow, originating from the generation of photoinduced radicals in the metal-assisted ligand-ligand electron transfer process of 3-hydroxy-2-naphthoic acid (HNAP-OH). This work enriches the metal ring cluster chemistry and reports the example of the aluminum-oxo cluster-based photochromic material, developing a novel system of photochromic materials.

PMA-FeCo mixed-oxide magnetic quasi-nanosheets

Free-standing 2D nanoassemblies are a new class of advanced functional materials that can integrate the unique properties of their individual components. Herein, we report a facile template-free solvothermal strategy to manipulate the assembly of structurally distinct building blocks into free-standing 2D quasi-nanosheets. The obtained 2D nanoassemblies are magnetic in nature with thickness in the range of tens of nanometers and lateral dimensions of several micrometers. They showed exceptionally high stability and can even remain intact in any solvent for months without any significant disassembly. The magnetic quasi-nanosheets were further used to remove polystyrene (PS), a model microplastic pollutant, from water. The robust phosphomolybdic acid (PMA) cluster-based hybrid exhibited outstanding PS removal performance because of the unique quasi-nanosheet architecture and multiple coordination sites of the redox-active PMA clusters. Overall, our developed co-assembly and subsequent water purification strategy effectively tackles various limitations associated with traditional assembly and water purification strategies.

Organoamine-Directed Assembly of 5p-4f Heterometallic Cluster Substituted Polyoxometalates: Luminescence and Proton Conduction Properties

The assembly of heterometallic cluster substituted polyoxometalates (POMs) remains a great challenge for inorganic synthetic chemistry up to now. Herein, a series of 5p-4f heterometallic cluster substituted POMs were successfully isolated by a facile one-step hydrothermal reaction method, namely H₁₇(H₂en)₃[Sb^III₉Sb^VLn₃O₁₄(H₂O)₃][(SbW₉O₃₃)₃(PW₉O₃₄)]·28H₂O(1-Ln, Ln = Ce, Sm, Eu, Gd, Tb, Dy) (en = ethylenediamine). Interestingly, by replacing en with imidazole, another series of 5p-4f heterometallic cluster substituted POMs H₁₃(HIm)₄K₂Na₄(H₂O)₉[Sb^III₉Sb^VLn₃O₁₄(H₂O)₃][(SbW₉O₃₃)₃(PW₉O₃₄)]·26H₂O (2-Ln, Ln = Sm, Eu, Gd, Tb, Dy, Im = imidazole) were obtained. Structural analyses indicate that both 1-Ln and 2-Ln are made up of an unprecedented 5p-4f heterometallic {Sb₁₀Ln₃O₁₄(H₂O)₃} cluster stabilized simultaneously by mixed trilacunary heteropolyanions including {A-α-PW₉O₃₄} and {B-α-SbW₉O₃₃}. Impedance measurements indicate that both compounds exhibit different proton conduction properties, and the conductivity of 2 can reach up to 1.64 × 10^-2 S cm^-1 at 85 °C under 98% relative humidity. Moreover, the fluorescence emission behaviors of both compounds have been studied.