A hydrophobic artificial solid-interphase-protective layer with fast self-healable capability for stable lithium metal anodes

Self-Healing Binder for High-Voltage Batteries

Lithium-ion batteries are core components of flexible electronic devices. However, deformation types, such as impinging, bending, stretching, folding, and twisting, can cause internal cracks and, eventually, damage these batteries. The cracks separate the active particles from the conductive particles and the binder, as well as the electrode from the collector. Self-healing binders can alleviate this mechanical damage and improve the stress response of active material particles during high rates of charging and discharging of these batteries and the operation at a high voltage, thereby enhancing their cycle performance. In the present study, a thermoplastic intrinsic self-healing polymer (TISP) binder is proposed. The TISP is obtained by polymerization of butanediol (2,3-BDO), propylene glycol (1,3-PDO), succinic acid (SuA), sebacic acid (SeA), and iconic acid (IA). The hydroxyl and ester groups in its structure can form diverse bonds including the hydrogen and ion-dipole with active particles and the current collector, thereby producing elevated adhesion. Its properties, including a low glass transition temperature (-60 °C), amorphous structure, and low cross-link density, improve the mobility of polymer chains at 40 °C, and this facilitates structural recovery and the maintenance of strong adhesions. Owing to its higher occupied molecular orbital (HOMO) level than the electrolyte solvent, the TISP is likely oxidized before the main component of the electrolyte during charging. This decomposition produces a chemical passivation interphase on the cathode which reduces side reactions of LiCoO₂ and the electrolyte under high-voltage conditions. Tests reveal that a LiCoO₂ electrode battery using the TISP as a binder retains 162.4 mAh g^-1 after 349 cycles at 4.5 V, and this represents an 86.5% capacity retention. In addition, heating (40 °C, 1 h) of a scratch-damaged electrode can recover a specific capacity of 156.6 mAh g^-1 after 349 cycles at 4.5 V. Relative to a battery without any mechanical scratch, this capacity recovery represents approximately 96%, and this demonstrates the importance of the TISP to the high-voltage damaged electrode.

Stretchable Gas Barrier Films Using Liquid Metal toward a Highly Deformable Battery

Highly deformable batteries that are flexible and stretchable are important for the next-generation wearable devices. Several studies have focused on the stable operation and life span of batteries. On the other hand, there has been less focus on the packaging of highly deformable batteries. In wearable devices, solid-state or pouch lithium-ion batteries (LIBs) packaged in aluminum (Al)-laminated films, which protect against moisture and gas permeation, are used. Stretchable elastomer materials are used as the packaging films of highly deformable batteries; however, they are extremely permeable to gas and moisture. Therefore, a packaging film that provides high deformability along with gas and moisture barrier functionalities is required for the stable operation of highly deformable batteries used in ambient conditions. In this study, a stretchable packaging film with high gas barrier functionality is developed successfully by coating a thin layer of liquid metal onto a gold (Au)-deposited thermoplastic polyurethane film using the layer-by-layer method. The film exhibits excellent oxygen gas impermeability under mechanical strain and extremely low moisture permeability. It shows high impermeability along with high mechanical robustness. Using the proposed stretchable gas barrier film, a highly deformable LIB is assembled, which offers reliable operation in air. The operation of the highly deformable battery is analyzed by powering LEDs under mechanical deformations in ambient conditions. The proposed stretchable packaging film can potentially be used for the development of packaging films in advanced wearable electronic devices.