A new device for fiducial registration of image-guided navigation system for liver RFA

Concentric-ring arrays for forward-viewing ultrasound imaging

Purpose

Current ultrasound (US)-image-guided needle insertions often require an expertized technique for clinicians because the performance of tasks in a three-dimensional space using two-dimensional images requires operators to cognitively maintain the spatial relationships between the US probe, the needle, and the lesion. This work presents forward-viewing US imaging with a ring array configuration to enable needle interventions without requiring the registration between tools and targets.

Approach

The center-open ring array configuration allows the needle to be inserted from the center of the visualized US image, providing simple and intuitive guidance. To establish the feasibility of the ring array configuration, the design parameters causing the image quality, including the radius of the center hole and the number of ring layers and transducer elements, were investigated.

Results

Experimental results showed successful visualization, even with a hole in the transducer elements, and the target visibility was improved by increasing the number of ring layers and the number of transducer elements in each ring layer. Reducing the hole radius improved the region's image quality at a shallow depth.

Conclusions

Forward-viewing US imaging with a ring array configuration has the potential to be a viable alternative to conventional US image-guided needle insertion methods.

Application of computer-aided image reconstruction and image guide in parasagittal meningioma resection

Background

In recent years, smaller-sized (diameter < 2.5 cm) meningiomas are diagnosed due to increased cranial imaging. Symptomatic meningiomas need to be removed surgically. Therefore, it is extremely important to locate the lesion exactly to tailor the craniotomy especially if the neuro-navigation system is not available. Many hospitals located in the underdeveloped countries cannot afford the high costs of neuro-navigation equipment. Hence, it is relevant to discover low-cost associated and effective methods for lesion localization for surgery.

Methods

The use of localization markers in advance can help to acquire preoperative CT images of the patients to create and calculate a three-dimensional (3D) virtual graph using a computer. With the 3D graph, spatial distance of the tumor from the markers is calculated and the tumor location projected on the scalp by the Triangle Pythagorean theorem. This enables precise localization of intracranial microlesions preoperatively.

Results

The location of the tumor was consistent with that of the pre-operative virtual image, and the craniotomy was exact. The patient was discharged 3 days later without any neurological deficits.

Conclusions

This method is simple and reliable, inexpensive, and accurate in the location of small-sized lesions, which can partially compensate for the lack of neuro-navigation and is suitable for widespread application in hospitals in developing countries.

Optimization Model for the Distribution of Fiducial Markers in Liver Intervention

The distribution of fiducial markers is one of the main factors affected the accuracy of optical navigation system. However, many studies have been focused on improving the fiducial registration accuracy or the target registration accuracy, but few solutions involve optimization model for the distribution of fiducial markers. In this paper, we propose an optimization model for the distribution of fiducial markers to improve the optical navigation accuracy. The strategy of optimization model is reducing the distribution from three dimensional to two dimensional to obtain the 2D optimal distribution by using optimization algorithm in terms of the marker number and the expectation equation of target registration error (TRE), and then extend the 2D optimal distribution in two dimensional to three dimensional to calculate the optimal distribution according to the distance parameter and the expectation equation of TRE. The results of the experiments show that the averaged TRE for the human phantom is approximately 1.00 mm by applying the proposed optimization model, and the averaged TRE for the abdominal phantom is 0.59 mm. The experimental results of liver simulator model and ex-vivo porcine liver model show that the proposed optimization model can be effectively applied in liver intervention.

Ring-arrayed Forward-viewing Ultrasound Imaging System: A Feasibility Study

Current standard workflows of ultrasound (US)-guided needle insertion require physicians to use their both hands: holding the US probe to locate interested areas with the non-dominant hand and the needle with the dominant hand. This is due to the separation of functionalities for localization and needle insertion. This requirement does not only make the procedure cumbersome, but also limits the reliability of guidance given that the positional relationship between the needle and US images is unknown and interpreted with their experience and assumption. Although the US-guided needle insertion may be assisted through navigation systems, recovery of the positional relationship between the needle and US images requires the usage of external tracking systems and image-based tracking algorisms that may involve the registration inaccuracy. Therefore, there is an unmet need for the solution that provides a simple and intuitive needle localization and insertion to improve the conventional US-guided procedure. In this work, we propose a new device concept solution based on the ring-arrayed forward-viewing (RAF) ultrasound imaging system. The proposed system is comprised with ring-arrayed transducers and an open whole inside the ring where the needle can be inserted. The ring array provides forward-viewing US images, where the needle path is always maintained at the center of the reconstructed image without requiring any registration. As the proof of concept, we designed single-circle ring-arrayed configurations with different radiuses and visualized point targets using the forward-viewing US imaging through simulations and phantom experiments. The results demonstrated the successful target visualization and indicates the ring-arrayed US imaging has a potential to improve the US-guided needle insertion procedure to be simpler and more intuitive.

Three-Dimensional Surface Point Cloud Ultrasound for Better Understanding and Transmission of Ultrasound Scan Information

Ultrasound is notoriously plagued by high user dependence. There is a steep drop-off in information in going from what the sonographer sees during image acquisition and what the interpreting radiologist is able to view at the reading station. One countermeasure is probe localization and tracking. Current implementations are too difficult and expensive to use and/or do not provide adequate detail and perspective. The aim of this work was to demonstrate that a protocol combining surface three-dimensional photographic imaging with traditional ultrasound images may be a solution to the problem of probe localization, this approach being termed surface point cloud ultrasound (SPC-US). Ultrasound images were obtained of major vessels in an ultrasound training phantom, while simultaneously obtaining surface point cloud (SPC) 3D photographic images, with additional scanning performed on the right forearm soft tissues, kidneys, chest, and pelvis. The resulting sets of grayscale/color Doppler ultrasound and SPC images are juxtaposed and displayed for interpretation in a manner analogous to current text-based annotation or computer-generated stick figure probe position illustrations. Clearly demonstrated is that SPC-US better communicates information of probe position and orientation. Overall, it is shown that SPC-US provides much richer image representations of probe position on the patients than the current prevailing schemes. SPC-US turns out to be a rather general technique with many anticipated future applications, though only a few sample applications are illustrated in the present work.