High performance of screen-printed graphite electrode modified with Ni–Mo-MOF for voltammetric determination of amaranth

Recent advances in electrochemical detection of common azo dyes

PURPOSE

Food forensics is an emerging field and the initial part of this review showcases the toxic effects and the instrumental methods applied for the detection of the most commonly used azo dyes. Electrochemical detection has a lot of advantages and hence the significance of the most important techniques used in the electrochemical detection is discussed. The major part of this review highlights the surface modified electrodes, utilized for the detection of the most important azo dyes to achieve low detection limit (LOD).

METHODS

A thorough literature study was conducted using scopus, science direct and other scientific databases using specific keywords such as toxic azo dyes, electrochemical detection, modified electrodes, LOD etc. The recent references in this field have been included.

RESULTS

From the published literature, it is observed that with the growing interests in the field of electrochemical techniques, a lot of importance have been given in the area of modifying the working electrodes. The results unambiguously show that the modified electrodes outperform bare electrodes and offer a lower LOD value.

CONCLUSION

According to the literature reports it can be concluded that, compared to other detection methods, electrochemical techniques are much dependable and reproducible. The fabrication of the electrode material with the appropriate modifications is the main factor that influences the sensitivity. Electrochemical sensors can be designed to be more sensitive, more reliable, and less expensive. These sensors can be effectively used by toxicologists to detect trace amounts of harmful dyes in food samples.

A novel ACE2-Based electrochemical biosensor for sensitive detection of SARS-CoV-2

SARS-CoV-2 emerged in late 2019 and quickly spread globally, resulting in significant morbidity, mortality, and socio-economic disruptions. As of now, collaborative global efforts in vaccination and the advent of novel diagnostic tools have considerably curbed the spread and impact of the virus in many regions. Despite this progress, the demand remains for low-cost, accurate, rapid and scalable diagnostic tools to reduce the influence of SARS-CoV-2. Herein, the angiotensin-converting enzyme 2 (ACE2), a receptor for SARS-CoV-2, was immobilized on two types of electrodes, a screen-printed gold electrode (SPGE) and a screen-printed carbon electrode (SPCE), to develop electrochemical biosensors for detecting SARS-CoV-2 with high sensitivity and selectivity. This was achieved by using 1H, 1H, 2H, 2H-perfluorodecanethiol (PFDT) and aryl diazonium salt serving as linkers for SPGEs and SPCEs, respectively. Once SARS-CoV-2 was anchored onto the ACE2, the interaction of the virus with the redox probe was analyzed using electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). Aryl diazonium salt was observed as a superior linker compared to PFDT due to its consistent performance in the modification of the SPCEs and effective ACE2 enzyme immobilization. A distinct pair of redox peaks in the cyclic voltammogram of the biosensor modified with aryl diazonium salt highlighted the redox reaction between the functional groups of SARS-CoV-2 and the redox probe. The sensor presented a linear relationship between the redox response and the logarithm of SARS-CoV-2 concentration, with a detection limit of 1.02 × 106 TCID50/mL (50% tissue culture infectious dose). Furthermore, the biosensor showed remarkable selectivity towards SARS-CoV-2 over H1N1virus.

Recent advances in electrochemical sensors based on nanomaterials for detection of red dyes in food products: A review

Red dyes as Allura Red (E129), Amaranth (E124), Ponceau 4R (E123), Erythrosine (E127) and Carmoisine (E122), are very popular food additives due to their stability, low cost, and minimal microbial contamination. Despite these advantages, their consumption may result in asthma, hyperactivity, carcinogenic effects, etc depending on the uptake and age. Therefore, the United States Food and Drug Administration (FDA) and European Food Safety Authority (EFSA) have managed the permissions of allowed daily intake (ADI) for consumption levels of these dyes to be 0.01-7.0 mg/kg to assure foodstuffs consumer's safety and avoid their adverse effects. Yet, many countries as Japan and USA have prohibited their use in food and drinks to reduce their possible health risks. Based on the above concentration ranges, highly sensitive and selective detection techniques are required, accordingly, the application of electrochemical sensors for the analysis of these dyes in food samples is very promising due to their superior sensitivity and selectivity, low cost and rapid response compared to traditional spectrophotometric or chromatographic methods. Also, they can be miniaturized, portable and require no complicated sampling or preparation procedures, besides being ecofriendly which allows their commercialization for public consumers in fast detection kits. In this review, the role of nanomaterials such as: carbon-based, transition metal oxides, metal organic frameworks, ionic liquids and others in enhancing the detection properties of modified electrochemical sensors for red dyes will be evaluated in terms of the type of nanomaterial applied, tested food samples and their impact on the evaluation of foodstuffs quality.

Development and Fabrication of a Molecularly Imprinted Polymer-Based Electroanalytical Sensor for the Determination of Acyclovir

Acyclovir (ACV), a synthetic nucleoside derivative of purine, is one of the most potent antiviral medications recommended in the specific management of varicella-zoster and herpes simplex viruses. The molecularly imprinted polymer (MIP) was utilized to create an effective and specific electrochemical sensor using a straightforward photopolymerization process to determine ACV. The polymeric thin coating was developed using the template molecule ACV, a functional monomer acrylamide, a basic monomer 2-hydroxyethyl methacrylate, a cross-linker ethylene glycol dimethacrylate, and a photoinitiator 2-hydroxy-2-methyl propiophenone on the exterior of the glassy carbon electrode (GCE). Scanning electron microscopy, attenuated total reflectance-Fourier transform infrared spectroscopy, electrochemical impedance spectroscopy, and cyclic voltammetry were employed for the purpose of characterizing the constructed sensor (AM-ACV@MIP/GCE). Differential pulse voltammetry and a 5 mM ferrocyanide/ferricyanide ([Fe(CN)6]3-/4-) redox reagent were used to detect the ACV binding to the specific cavities on MIP. The study involves density functional theory (DFT) calculations, which were conducted to investigate template-functional monomer interactions thoroughly, calculate template-functional monomer interaction energies, and determine the optimal template/functional monomer ratio. DFT calculations were performed using Becke's three-parameter hybrid functional with the Lee-Yang-Parr correlation functional (B3LYP) method and 6-31G(d,p) basis set. The sensor exhibits linear performance throughout the concentration region 1 × 10-11 to 1 × 10-10 M, and the limit of detection and limit of quantification were 7.15 × 10-13 M and 2.38 × 10-12 M, respectively. For the electrochemical study of ACV, the sensor demonstrated high accuracy, precision, robustness, and a short detection time. Furthermore, the developed electrochemical sensor exhibited exceptional recovery in tablet dosage form and commercial human blood samples, with recoveries of 99.40 and 100.44%, respectively. The findings showed that the AM-ACV@MIP/GCE sensor would effectively be used to directly assess pharmaceuticals from actual specimens and would particularly detect ACV compared to structurally similar pharmaceutical compounds.

A ratiometric sensor based on dual-emission carbon dots sensitive detection of amaranth

Amaranth (AMA), a common food additive, is important to strictly control the content of food for the human body. In this paper, an innovative method based on intrinsic dual-emissive carbon dots (Y/B-CDs) was used to detect AMA. Y/B-CDs have two emission wavelengths at 416 and 544 nm with the excitation wavelength at 362 nm. The addition of AMA can rapidly quench the fluorescence of the two peaks with different degrees, and ratiometric detection can be achieved. Quantitative analysis showed two linear ranges of 0.1-20 μM and 20-80 μM, and detection limits are 42 and 33 nM, respectively. Moreover, good results were obtained for the detection of AMA in beverages and candy using Y/B-CDs. This suggests that the constructed sensor has the potential to detect AMA in real samples.

ZnO Hollow Quasi-Spheres Modified Screen-Printed Graphite Electrode for Determination of Carmoisine

Food colorants are important in food selection because they improve the gastronomic appeal of foods by improving their aesthetic appeal. However, after prolonged use, many colorants turn toxic and cause medical problems. A synthetic azo-class dye called carmoisine gives meals a red color. Therefore, the carmoisine determination in food samples is of great importance from the human health control. The current work was developed to synthesis ZnO hollow quasi-spheres (ZnO HQSs) to prepare a new electrochemical carmoisine sensor that is sensitive. Field emission-scanning electron microscopy (FE-SEM) and X-ray diffraction (XRD) have been used to analyze the properties of prepared ZnO HQSs. A screen-printed graphite electrode (SPGE) surface was modified with ZnO HQSs to prepare the ZnO HQSs-SPGE sensor. For carmoisine detection, the ZnO HQSs-SPGE demonstrated an appropriate response and notable electrocatalytic activities. The carmoisine electro-oxidation signal was significantly stronger on the ZnO HQSs-SPGE surface compared to the bare SPGE. Cyclic voltammetry (CV), linear sweep voltammetry (LSV), chronoamperometry (CHA), and differential pulse voltammetry (DPV) have been utilized to investigate the suggested protocol. The DPV results revealed an extensive linear association between variable carmoisine concentrations and peak current that ranged from 0.08 to 190.0 µM, with a limit of detection (LOD) as narrow as 0.02 µM. The ZnO HQSs-SPGE's ability to detect carmoisine in real samples proved the sensor's practical application.

Electrochemical platform based on molecularly imprinted polymer with zinc oxide nanoparticles and multiwalled carbon nanotubes modified screen-printed carbon electrode for amaranth determination

A novel electrochemical platform for amaranth determination has been developed using a rapid, easy, inexpensive, and portable molecularly imprinted polymer technique. The MIP platform was fabricated by electropolymerizing melamine as monomer in the presence of amaranth as template on the surface of ZnO-MWCNT/SPCE. Then, amaranth was completely eluted, leaving imprinted cavities in the polymeric film that could effectively recognize amaranth in solution. The electrochemical platform based on a molecularly imprinted polymelamine was analyzed by scanning electron microscopy (SEM), cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and differential pulse voltammetry (DPV). Under optimum conditions, the developed MIP/ZnO-MWCNT/SPCE platform can be properly used for amaranth determination, with high sensitivity of 96.2 µA µM cm^-2, two linear concentration ranges (0.01 to 1 µM and 1 to 1000 µM) and a low limit of detection of 0.003 µM. The anodic peak potential of amaranth was found to be 0.73 V. Additionally, the polymelamine MIP films specifically recognize amaranth molecules, making it possible to detect amaranth in a complex solution with high selectivity, excellent repeatability, reproducibility, and stability. The MIP/ZnO-MWCNT modified screen-printed carbon electrode was successfully applied to determine amaranth in pharmaceutical and water samples, with recovery values ranging from 99.7 to 102% and RSD% values less than 3.2%.

Halloysite nanotube/black phosphorene nanohybrid modified screen-printed carbon electrode as an ultra-portable electrochemical sensing platform for smartphone-capable detection of maleic hydrazide with machine learning assistance

With the assistance of machine learning (ML), black phosphorene (BP) stabilized by silver nanoparticles (AgNPs) is used to modify halloysite nanotube (HNT) to obtain highly conductive nanomaterials, HNT/BP-AgNPs, which are morphologically characterized and elementally analyzed. Artificial neural network (ANN) and least squares support vector machine (LS-SVM) are adopted for the intelligent and rapid analysis of maleic hydrazide (MH). An ultra-portable electrochemical sensor bases on HNT/BP-AgNPs modifying screen-printed carbon electrode (SPCE), smartphone and mini-palm potentiostat for detection of MH in the linear range 0.7-55 μM with limit of detection (LOD) of 0.3 μM. For comparison, a traditional electrochemical sensor is fabricated by glass carbon electrode (GCE), desktop computer and large electrochemical potentiostat, and the linear range is 0.3-600 μM with low LOD of 0.1 μM. The ultra-portable electrochemical sensor combined with ML for the detection of MH in sweat potato and carrot gain satisfactory recoveries.

A novel 2-dimensional nanocomposite as a mediator for the determination of doxorubicin in biological samples

In our study, the electrochemical properties of a novel activated nanocomposite were studied with 2-dimensional graphitic carbon nitride/sodium dodecyl sulfate/graphene nanoplatelets on the screen-printed electrodes (2D-g-C₃N₄/SDS/GNPs/SPE). The as-fabricated sensor exhibited excellent electrochemical performance, including wide dynamic ranges from 0.03 to 1.0 and 1.0-13.5 μM with a low limit of detection (LOD) of 10.0 nM. The fabricated 2D-g-C₃N₄/SDS/GNPs/SPE electrode exhibited high sensitivity, stability, good reproducibility, reusability, and repeatability towards DOX sensing. It can be utilized in real samples, including human plasma and urine, with excellent correlations and coefficients of variation below 6.0%. Therefore, this study presents potential application values in sensing DOX with efficient performance. Finally, the accuracy was attested by comparison with high-performance liquid chromatography (HPLC) as the reference method, signalizing a good agreement.

Tungsten Disulfide Decorated Screen-Printed Electrodes for Sensing of Glycated Hemoglobin

Diabetes is a global menace, and its severity results in various disorders including cardiovascular, retinopathy, neuropathy, and nephropathy. Recently, diabetic conditions are diagnosed through the level of glycated hemoglobin. The level of glycated hemoglobin is determined with enzymatic methodology. Although the system is sensitive, it has various restrictions such as long processing times, expensive equipment required for testing, and complex steps involved in sample preparation. These limitations are a hindrance to faster results. The limitations of the developed methods can be eliminated through biosensors. In this work, an electrochemical platform was fabricated that facilitates the identification of glycated hemoglobin protein in diabetic patients. The working electrode on the integrated circuit was modified with molecularly imprinted polymer decorated with tungsten disulfide nanoparticles to enhance its analytical properties. The analytical properties of the biosensor were studied using electrochemical techniques. The obtained detection limit of the nanoelectronic sensor was 0.01 pM. The calculated sensitivity of the biosensor was observed to be 0.27 μA/pM. Also, the sensor promises to operate in a dynamic working concentration range and provide instant results.

A copper-based metal-organic framework decorated with electrodeposited Fe2O3 nanoparticles for electrochemical nitrite sensing

An amperometric nitrite sensor is reported based on a screen-printed carbon electrode (SPCE) modified with copper(II)-benzene-1,4-dicarboxylate (Cu-BDC) frameworks and iron(III) oxide nanoparticles (Fe₂O₃ NPs). First, copper(I) oxide (Cu₂O) nanocubes were synthesized, followed by a solvothermal reaction between Cu₂O and H₂BDC to form square plate-like Cu-BDC frameworks. Then, Fe₂O₃ NPs were electrodeposited on Cu-BDC frameworks using a potentiostatic method. The Fe₂O₃@Cu-BDC nanocomposite benefits from high conductivity and large active surface area, offering excellent electrocatalytic activity for nitrite oxidation. Under optimal amperometric conditions (0.55 V vs. Ag/AgCl), the sensor has a linear range of 1 to 2000 µM with a detection limit of 0.074 µM (S/N = 3) and sensitivity of 220.59 µA mM^-1 cm^-2. The sensor also provides good selectivity and reproducibility (RSD = 1.91%, n = 5). Furthermore, the sensor exhibits long-term stability, retaining 91.4% of its original current after 4 weeks of storage at room temperature. Finally, assessing nitrite in tap and mineral water samples revealed that the Fe₂O₃@Cu-BDC/SPCE has a promising prospect in amperometric nitrite detection.

An Electroanalytical Flexible Biosensor Based on Reduced Graphene Oxide-DNA Hybrids for the Early Detection of Human Papillomavirus-16

Human Papilloma Virus 16 (HPV 16) is the well-known causative species responsible for triggering cervical cancer. When left undiagnosed and untreated, this disease leads to life-threatening events among the female populace, especially in developing nations where healthcare resources are already being stretched to their limits. Considering various drawbacks of conventional techniques for diagnosing this highly malignant cancer, it becomes imperative to develop miniaturized biosensing platforms which can aid in early detection of cervical cancer for enhanced patient outcomes. The current study reports on the development of an electrochemical biosensor based on reduced graphene oxide (rGO)/DNA hybrid modified flexible carbon screen-printed electrode (CSPE) for the detection of HPV 16. The carbon-coated SPEs were initially coated with rGO followed by probe DNA (PDNA) immobilization. The nanostructure characterization was performed using UV-Vis spectroscopy, Fourier transform infrared (FTIR) spectroscopy, Raman spectroscopy and X-ray diffraction (XRD) techniques. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) were employed to study the electrochemical characterization of the nano-biohybrid sensor surface. The optimization studies and analytical performance were assessed using differential pulse voltammetry (DPV), eventually exhibiting a limit of detection (LoD) ~2 pM. The developed sensor was found to be selective solely to HPV 16 target DNA and exhibited a shelf life of 1 month. The performance of the developed flexible sensor further exhibited a promising response in spiked serum samples, which validates its application in future point-of-care scenarios.

A novel platform based on CoMn2O4-rGO/1-ethyl-3-methylimidazolium chloride modified carbon paste electrode for voltammetric detection of pethidine in the presence morphine and olanzapine

The present work focuses on the development of a new electrochemical platform based on CoMn₂O₄-rGO/1-ethyl-3-methylimidazolium chloride modified carbon paste electrode (CoMn₂O₄-rGO/IL/CPE) for electrochemical determination of pethidine in the presence of biological species. For the first time, the electrooxidation mechanism of pethidine in presences of morphine and olanzapine is investigated by cyclic voltammetry (CV) and differential pulse voltammetry (DPV) technologies. The as-synthesized CoMn₂O₄-rGO nanocomposites are characterized by physicochemical measurements such as X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDX), Field emission scanning electron microscopy (FE-SEM), and Fourier transform infrared (FT-IR). The obtained results illustrated synergistic interactions between rGO and CoMn₂O₄ structures. Also, to investigate the electrode charge-transfer resistances, electrochemical features of the resulting nanocomposites are studied via electrochemical impedance spectroscopy (EIS) analysis. Based on the result, three segmented linear ranges are observed over the range 0.08-900 μM and detection limit of 0.024 μM. Over the 10.0-40.0 μM ranges of pethidine in phosphate buffer solution (PBS-pH 7.0), suitable diffusion coefficient of 5.67 × 10^-7 cm² s^-1 is evaluated by chronoamperometry technique (CHA). Finally, the CoMn₂O₄-rGO/IL/CPE with high sensitivity, selectivity and repeatability is successfully used for determination of pethidine in real sample and drug formulation.

Recent advances in carbon nanomaterials-based electrochemical sensors for food azo dyes detection

Azo dyes as widely applied food colorants are popular for their stability and affordability. On the other hand, many of these dyes can have harmful impacts on living organs, which underscores the need to control the content of this group of dyes in food. Among the various analytical approaches for detecting the azo dyes, special attention has been paid to electro-analytical techniques for reasons such as admirable sensitivity, excellent selectivity, reproducibility, miniaturization, green nature, low cost, less time to prepare and detect of specimens and the ability to modify the electrode. Satisfactory results have been obtained so far for carbon-based nanomaterials in the fabrication of electrochemical sensing systems in detecting the levels of these materials in various specimens. The purpose of this review article is to investigate carbon nanomaterial-supported techniques for electrochemical sensing systems on the analysis of azo dyes in food samples in terms of carbon nanomaterials used, like carbon nanotubes (CNT) and grapheme (Gr).

High-efficiency application of CTS-Co NPs mimicking peroxidase enzyme on TMB(ox)

In this study, analytical studies of Chitosan-Cobalt(II) (CTS-Co(II)) nanoparticles (CTS - Co NPs) by mimicking horseradish peroxidase (HRP) were evaluated. In the applications, it was observed that CTS-Co NPs 3,3' 5,5' tetramethylbenzidine (TMB) oxidized in the presence of hydrogen peroxide (H₂O₂). The required CTS-Co NPs were synthesized at 50 °C in 30 min and characterized using Fourier transform infrared spectroscopy (FTIR), thermal gravimetric analysis (TGA), inductively coupled plasma-optical emission spectroscopy (ICP-OES), and X-ray photon spectroscopy (XPS) was done. CTS-Co NPs were studied to develop a selective TMB biosensor on TMB(ox) substrate. The synthesized CTS-Co NPs formed a catalytic reaction with 30% 0.2 mM H₂O₂ on 0.2 M TMB substrate. After the catalytic reaction, sensitive signals were obtained from the desired biosensor. Electrochemical measurements were taken as low limit of 10 mg and a high limit of 20 mg for the determination of CTS-Co NPs to TMB(ox). In the microplate study; The sensors were applied on 1.5 μg and 3 μg CTS-Co NPs TMB(ox) substrate, respectively. CTS- Co NPs; for TMB(ox) determination, optical density (OD) measurement was taken as a low limit of 1.5 μg and a high limit of 3 μg. Electrochemical applications of particles and microplate reader results were compared with horseradish peroxidase (HRP) enzyme for sensor properties. According to the data obtained, it was observed that it behaved similarly to the CTS-Co NPs peroxidase enzyme. This work presents innovations for nanoparticle extraction and sensor study from chitosan and other naturally sourced polymers.

Identification of heavy metal ions from aqueous environment through gold, Silver and Copper Nanoparticles: An excellent colorimetric approach

Heavy metal pollution has become a severe threat to human health and the environment for many years. Their extensive release can severely damage the environment and promote the generation of many harmful diseases of public health concerns. These toxic heavy metals can cause many health problems such as brain damage, kidney failure, immune system disorder, muscle weakness, paralysis of the limbs, cardio complaint, nervous system. For many years, researchers focus on developing specific reliable analytical methods for the determination of heavy metal ions and preventing their acute toxicity to a significant extent. The modern researchers intended to utilize efficient and discerning materials, e.g. nanomaterials, especially the metal nanoparticles to detect heavy metal ions from different real sources rapidly. The metal nanoparticles have been broadly utilized as a sensing material for the colorimetric detection of toxic metal ions. The metal nanoparticles such as Gold (Au), Silver (Ag), and Copper (Cu) exhibited localized plasmon surface resonance (LPSR) properties which adds an outstanding contribution to the colorimetric sensing field. Though, the stability of metal nanoparticles was major issue to be exploited colorimetric sensing of heavy emtal ions, but from last decade different capping and stabilizing agents such as amino acids, vitmains, acids and ploymers were used to functionalize the metal surface of metal nanoparticles. These capping agents prevent the agglomeration of nanoparticles and make them more active for prolong period of time. This review covers a comprehensive work carried out for colorimetric detection of heavy metals based on metal nanoparticles from the year 2014 to onwards.

In situ vertical alignment of 2D MoS2 layers on GO film: enhanced electrochemical properties for PD-L1 sensing

There is an urgent need for a flexible and simple programmed cell death ligand 1 (PD-L1) dynamic measurement method enabling real-time monitoring of cancer progression and assessment of immunotherapy efficacy. In the current study, we show facile in situ synthesis of vertical alignment two-dimensional molybdenum disulfide (2D MoS₂) layers on graphene-oxide-modified ITO (MoS_2┴GO-ITO) using a hydrothermal approach and demonstrate the importance of the alignment of 2D in achieving high-probe capturing, enhanced electrochemical properties and target selectivity during sensing. After modification of designed PD-L1 binding peptides on the MoS_2┴GO-ITO, a sensitive PD-L1 electrochemical sensor was designed using vertical alignment MoS₂ to capture more probes for PD-L1 recognition and excellent in plane electron transport to accelerate electrochemical signals. The fabricated electrochemical sensor could sensitively determine PD-L1 in a wide linear range of 25-500 ng/mL and exhibit desirable accuracy and reliability in clinical samples application. This simple and sensitive method is likely to investigate further research into the exploration of the perpendicular alignment of 2D surfaces for diverse applications.

Recent advantages in electrochemical monitoring for the analysis of amaranth and carminic acid food colors

This study provides a comprehensive review of the latest developments in the electrochemical impressions of the important dyestuffs including amaranth and carminic acid. Food colors are organic substances that have important effects on human health and food safety. While these substances do not pose a problem when used in the daily intake (ADI) amounts, they harm human health when consumed excessively. Amaranth and carminic acid are synthetic and natural food colors ingredients, respectively. Analysis of these substances in food, pharmaceutical, cosmetic and textile samples is extremely important because of their genotoxicity, cytostatic and cytotoxic effects. Electroanalytical methods, which have great advantages over traditional analytical methods, shed light on the scientific world. Electrochemical monitoring modules, which are fast, simple, accurate, reliable, and highly selective, are promising for the determination of both substances. Until now, amaranth and carminic acid food determinations have been carried out successfully with electrochemical monitoring techniques in many numbers in the literature. Voltammetric techniques are the most widely used among these electroanalytical methods. In particular, square wave and differential pulse voltammetric techniques, which have extraordinary properties, have been heavily preferred. Limits of detection (LOD) comparable to the standard analytical method have been achieved using these methods, which have very quick analysis durations, high precision and accuracy, do not require long preprocessing, and have great selectivity. In addition, more sensitive and selective analyses of amaranth and carminic acid in natural samples were carried out with numerous indicator electrodes. The merits of powerful electrochemical monitoring studies for the determination of both food colors during the last decade are presented in this study. Moreover, parameters such as analytical applications, detection limits, electrochemical methods, selectivity, working electrodes, and working ranges are summarized in detail.

Monitoring of Butylated Hydroxyanisole in Food and Wastewater Samples Using Electroanalytical Two-Fold Amplified Sensor

A high performance and fast response sensor was fabricated as a monitoring system for the determination of butylated hydroxyanisole (BHA) in food and wastewater samples. In this regard, a carbon paste electrode (CPE) that was amplified with platinum-decorated single wall carbon nanotubes (Pt/SWCNTs) and 1-Butyl-3-methylimidazolium chloride ([C4mim][Cl]) was investigated as a new electroanalytical sensor for the monitoring of BHA in aqueous solution. The [C4mim][Cl]/Pt/SWCNTs/CPE offered an excellent catalytic activity on oxidation signal of BHA and enhanced its oxidation current about 5.51 times. In the final step, the standard addition results confirmed the powerful ability of [C4mim][Cl]/Pt/SWCNTs/CPE to the monitoring of BHA in different water and food samples with acceptable recovery data.

Electrochemical determination of epirubicin in the presence of topotecan as essential anti-cancer compounds using paste electrode amplified with Pt/SWCNT nanocomposite and a deep eutectic solvent

Epirubicin (EP) and topotecan (TP) are two major anti-cancer compounds for the treatment of breast cancer with serious side effects. Hence herein, a carbon paste electrode (CPE) amplified with Pt/SWCNT nanocomposite and a deep eutectic solvent (CPE/DES/Pt-SWCNT) were proposed as an analytical tool for the monitoring of EP in the presence of TP in the real samples. Amplification of sensor was improve EP oxidation signal about 2.73 times. Under the optimized conditions, EP determined by using differential pulse voltammetry (DPV) technique with linear dynamic range of 0.001-500 μM with limit of detection (LOD) of 0.8 nM. The CPE/DES/Pt-SWCNT offered influential ability for monitoring of EP in injection and dextrose saline samples with a recovery range of 97.4%-104.9%.

Monitoring of atropine anticholinergic drug using voltammetric sensor amplified with NiO@Pt/SWCNTs and ionic liquid

In this work, the synergic impact of 1-ethyl-3-methylimidazolium methyl sulfate (EMMS) and NiO doped Pt decorated SWCNTs (NiO@Pt/SWCNTs) in carbon paste matrix was examined as an analytical tool for investigating electrochemical behavior of atropine. The voltammetric results revealed that NiO@Pt/SWCNTs/EMMS/CPE exhibited an excellent electrocatalytic activity towards redox reaction of atropine in aqueous solution pH = 10.0. The NiO@Pt/SWCNTs/EMMS/CPE offered the best electro-analytical conditions for monitoring of atropine in the concentration range of 4.0 nM-220 μM with an increase in oxidation current about 5.93 times. On the other hand, NiO@Pt/SWCNTs/EMMS/CPE displayed a long time stability (about 60 days) for monitoring of atropine. The ability of NiO@Pt/SWCNTs/EMMS/CPE as an electroanalytical tool for monitoring of atropine was investigated, and the recovery range was detected as to be 97.6%-104.25% for this goal.

Three-dimensional porous reduced graphene oxide decorated with carbon quantum dots and platinum nanoparticles for highly selective determination of azo dye compound tartrazine

In this work, an electrochemical sensor for the azo dye compound tartrazine (TRT) determination was proposed. A screen-printed carbon electrode (SPCE) was modified by depositing three-dimensional porous reduced graphene oxide decorated with carbon quantum dots and platinum nanoparticles (Pt/CQDs@rGO/SPCE). The resulting amount of TRT was observed by differential pulse voltammetry. Under optimal conditions, the sensor exhibited two wide linearities ranging from 0.01 to 1.57 μM and 1.57-9.3 μM with the reliability coefficient of determination of 0.991 and 0.992, respectively. The detection limit (LOD) was also estimated to be 7.93 nM. Moreover, the Pt/CQDs@rGO/SPCE suggested high selectivity in the presence of several interfering agents and azo dye compounds that have a similar structure. Additionally, the Pt/CQDs@rGO/SPCE revealed superior recovery values of about 96.5-101.6% for candy, 99.7-103.5% for soft drinks, 96.0-101.2% for jelly powder, and 98.0-103.0% for water samples. Furthermore, the fabricated sensor exhibits excellent selectivity, stability, reproducibility, and repeatability, indicating a great perspective in the monitoring of TRT. Therefore, it can be speculated that the proposed electrode could be effectively applied to determine TRT in food samples.

Voltammetric sensor based on bimetallic nanocomposite for determination of favipiravir as an antiviral drug

A novel and sensitive voltammetric nanosensor was developed for the first time for trace level monitoring of favipiravir based on gold/silver core–shell nanoparticles (Au@Ag CSNPs) with conductive polymer poly (3,4-ethylene dioxythiophene) polystyrene sulfonate (PEDOT:PSS) and functionalized multi carbon nanotubes (F-MWCNTs) on a glassy carbon electrode (GCE). The formation of Au@Ag CSNPs/PEDOT:PSS/F-MWCNT composite was confirmed by various analytical techniques, including X-ray diffraction (XRD), ultraviolet–visible spectroscopy (UV–Vis), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDX), and field-emission scanning electron microscopy (SEM). Under the optimized conditions and at a typical working potential of + 1.23 V (vs. Ag/AgCl), the Au@Ag CSNPs/PEDOT:PSS/F-MWCNT/GCE revealed linear quantitative ranges from 0.005 to 0.009 and 0.009 to 1.95 µM with a limit of detection 0.46 nM (S/N = 3) with acceptable relative standard deviations (1.1-4.9 %) for pharmaceutical formulations, urine, and human plasma samples without applying any sample pretreatment (1.12–4.93%). The interference effect of antiviral drugs, biological compounds, and amino acids was negligible, and the sensing system demonstrated outstanding reproducibility, repeatability, stability, and reusability. The findings revealed that this assay strategy has promising applications in diagnosing FAV in clinical samples, which could be attributed to the large surface area on active sites and high conductivity of bimetallic nanocomposite.