Plasma-assisted synthesis of MnO2–polyaniline composite for electrochemical sensing of dopamine

Polydopamine functionalized FeTiO3 nanohexagons for selective and simultaneous electrochemical determination of dopamine and uric acid

Herein we report the simultaneous detection of dopamine (DA) and uric acid (UA) using polydopamine (PDA) functionalized FeTiO3 nanohexagons. The nanohexagons were hydrothermally synthesized and subsequently functionalized with PDA in a Tris-buffer solution. The PDA functionalized nanostructure was characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and Fourier transform infrared (FTIR), respectively. The SEM and TEM investigations revealed the presence of FeTiO3 nanohexagons along with a peripheral coating of PDA over the nanostructures. The XRD pattern confirmed the formation of the ilmenite structure, while the chemical structure was investigated through XPS and FTIR respectively. Using cyclic voltammetry (CV) the efficacy of FeTiO3-PDA electrode was evaluated toward DA oxidation. The enhanced activity of the functionalized electrode in DA oxidation, as compared to the untreated FeTiO3, may be attributed to the significant presence of hydroxyl, amine, and imine functional groups over the polymer layer. Differential pulse voltammetry (DPV) was utilized for the detection of DA and UA. With a linear range of 50 μM to 250 μM, the detection limits of 0.30 μM and 4.61 μM were determined for DA and UA, respectively. The peak separation of 263 mV between DA and UA demonstrates the sensor's remarkable selectivity. In addition, the study displayed the ability to detect both DA and UA simultaneously, and the validity of the sensor was evaluated in serum samples, respectively.

Copolymer-MnO2 nanocomposites for the adsorptive removal of organic pollutants from water

The copolymer beads prepared by suspension polymerisation were decorated with MnO₂ nanoparticles and successfully implemented for the efficient removal of toxic organic contaminants from water. Copolymer-MnO₂ nanocomposite was further analysed using XRD, SEM and optical microscope. The SEM images showed the surface characteristics of MnO₂ nanoparticles on copolymer beads. The efficiency of the copolymer-MnO₂ nanocomposite for the removal of model pollutant methylene blue and rhodamine B is then analysed by changing the concentration of pollutant. The results obtained exhibited 18.45 mg/g for methylene blue adsorption and 3.125 mg/g for rhodamine B. The adsorption equilibrium results were fitted to Langmuir adsorption isotherm for both methylene blue and rhodamine B adsorption. The desorption studies were performed for five consecutive cycles, and material was showing good regenerating capacity towards both organic pollutants. The obtained results show that copolymer-MnO₂ nanocomposite is an efficient material for the removal of organic contaminants from wastewater.