Effect of sunflower lecithins on the stability of water-in-oil and oil-in-water emulsions

Consumer acceptance of protein beverage ingredients: Less is more

An array of ingredients is added to protein beverage formulations. These ingredients may not be desirable to consumers. Our objective was to determine consumer perception of ingredients in protein beverages. An online survey was conducted with protein beverage consumers (n = 405). Maximum difference scaling and projective mapping were applied to determine the relative acceptance of ingredients based on their functional role (protein source, sweetener, stabilizer, thickener). Subsequently, 4 120-min focus groups were conducted (n = 25 consumers). Survey data were evaluated by univariate and multivariate statistics. Consumer sentiment from focus groups was compiled and grouped based on themes that emerged across multiple focus groups. Consumers placed the highest importance on the amount of protein followed by protein type in protein beverages. Plant protein, whey protein, and milk protein were most appealing, whereas soy protein, collagen, and casein or caseinates were less appealing. Natural sweeteners (agave, monk fruit, cane sugar) were the most appealing sweeteners. Fibers and starches were more appealing than gums (carrageenan, gellan gum). Stabilizers were the least desirable class of beverage ingredients, with sodium and potassium phosphates the least desirable. In regard to the package of a protein beverage, consumers placed the greatest importance on recognizable ingredients and plain language. Consistent with survey results, consumers in focus groups expressed skepticism and feeling overwhelmed by all of the ingredients on the label of protein beverages. Protein was their primary desire and the presence of sweeteners was acceptable, but they did not desire additional ingredients. There is an opportunity to increase the acceptance and competitiveness of dairy protein beverages by reformulating beverages to include fewer and more familiar ingredients. Functional proteins, such as those derived from dairy, may have opportunities to exclude undesirable ingredients (stabilizers, thickeners) from the label.

Dual (pH and thermal) stimuli-responsive Pickering emulsion stabilized by chitosan-carrageenan composite microgels

Formulation of water-in-oil (W/O) Pickering emulsion (PE) for food applications has been largely restricted by the limited choices of food-grade Pickering emulsifiers. In this study, composite microgels made of chitosan and carrageenan were explored as a dual (pH and thermal) stimuli-responsive Pickering emulsifier for the stabilization of W/O PE. The chitosan-carrageenan (CS-CRG) composite microgels not only exhibited pH- and thermo-responsiveness, but also displayed enhanced lipophilicity as compared to the discrete polymers. The stability of the CS-CRG-stabilized W/O PE system (CS-CRG PE) was governed by CS:CRG mass ratio and oil fractions used. The CS-CRG PE remained stable at acidic pH and at temperatures below 40 °C. The instability of CS-CRG composite microgels at alkaline pH and at temperatures above 40 °C rendered the demulsification of CS-CRG PE. This stimuli-responsive W/O PE could unlock new opportunities for the development of stimuli-responsive W/O PE using food-grade materials.

Liposomes: Structure, Biomedical Applications, and Stability Parameters With Emphasis on Cholesterol

Liposomes are essentially a subtype of nanoparticles comprising a hydrophobic tail and a hydrophilic head constituting a phospholipid membrane. The spherical or multilayered spherical structures of liposomes are highly rich in lipid contents with numerous criteria for their classification, including structural features, structural parameters, and size, synthesis methods, preparation, and drug loading. Despite various liposomal applications, such as drug, vaccine/gene delivery, biosensors fabrication, diagnosis, and food products applications, their use encounters many limitations due to physico-chemical instability as their stability is vigorously affected by the constituting ingredients wherein cholesterol performs a vital role in the stability of the liposomal membrane. It has well established that cholesterol exerts its impact by controlling fluidity, permeability, membrane strength, elasticity and stiffness, transition temperature (Tm), drug retention, phospholipid packing, and plasma stability. Although the undetermined optimum amount of cholesterol for preparing a stable and controlled release vehicle has been the downside, but researchers are still focused on cholesterol as a promising material for the stability of liposomes necessitating explanation for the stability promotion of liposomes. Herein, the prior art pertaining to the liposomal appliances, especially for drug delivery in cancer therapy, and their stability emphasizing the roles of cholesterol.

Direct impact of commonly used dietary emulsifiers on human gut microbiota

BACKGROUND

Epidemiologic evidence and animal studies implicate dietary emulsifiers in contributing to the increased prevalence of diseases associated with intestinal inflammation, including inflammatory bowel diseases and metabolic syndrome. Two synthetic emulsifiers in particular, carboxymethylcellulose and polysorbate 80, profoundly impact intestinal microbiota in a manner that promotes gut inflammation and associated disease states. In contrast, the extent to which other food additives with emulsifying properties might impact intestinal microbiota composition and function is not yet known.

METHODS

To help fill this knowledge gap, we examined here the extent to which a human microbiota, maintained ex vivo in the MiniBioReactor Array model, was impacted by 20 different commonly used dietary emulsifiers. Microbiota density, composition, gene expression, and pro-inflammatory potential (bioactive lipopolysaccharide and flagellin) were measured daily.

RESULTS

In accordance with previous studies, both carboxymethylcellulose and polysorbate 80 induced a lasting seemingly detrimental impact on microbiota composition and function. While many of the other 18 additives tested had impacts of similar extent, some, such as lecithin, did not significantly impact microbiota in this model. Particularly stark detrimental impacts were observed in response to various carrageenans and gums, which altered microbiota density, composition, and expression of pro-inflammatory molecules.

CONCLUSIONS

These results indicate that numerous, but not all, commonly used emulsifiers can directly alter gut microbiota in a manner expected to promote intestinal inflammation. Moreover, these data suggest that clinical trials are needed to reduce the usage of the most detrimental compounds in favor of the use of emulsifying agents with no or low impact on the microbiota. Video abstract.

Physicochemical Characterization and Evaluation of Emulsions Containing Chemically Modified Fats and Different Hydrocolloids

The study aims to investigate the physicochemical properties and stability of the dispersion systems containing structured fats as a fatty base. In this work, calf tallow and pumpkin seed oil blends were chemically interesterified at various ratios (9:1, 3:1, 3:2, 3:3, 2:3, and 1:3) to produce structured lipids. Fatty acids composition, polar and nonpolar fraction content, and acid value were determined for the raw fats and interesterified blends. Afterwards, selected blends were applied in emulsion systems. Stability, microstructure, color and texture of emulsions were evaluated. The chemical interesterification had an effect on the modified blends properties, and caused an increase in polar fraction content and acid value, and a decrease in nonpolar fraction content. No effect on the fatty acids composition has been found. The evaluation of the prepared emulsions results allowed us to select two of the most stable and favorable samples—both containing chemically interesterified calf tallow and a pumpkin seed oil blend in a ratio of 1:3 as a fatty base, and xanthan gum or carboxymethylcellulose as a thickener. The obtained dispersions, containing fatty bases with improved physicochemical properties and desirable functionality, can be applied as food, cosmetic, and pharmaceutical emulsions.

Particle-stabilized Janus emulsions that exhibit pH-tunable stability

A simple and large-scale fabrication approach to create Janus emulsions that can be controlled in size, geometry and stability.

Colloidal properties of sodium caseinate-stabilized nanoemulsions prepared by a combination of a high-energy homogenization and evaporative ripening methods

Nanoemulsions stabilized by sodium caseinate (NaCas) were prepared using a combination of a high-energy homogenization and evaporative ripening methods. The effects of protein concentration and sucrose addition on physical properties were analyzed by dynamic light scattering (DLS), Turbiscan analysis, confocal laser scanning microscopy (CLSM) and small angle X-ray scattering (SAXS). Droplets sizes were smaller (~100nm in diameter) than the ones obtained by other methods (200 to 2000nm in diameter). The stability behavior was also different. These emulsions were not destabilized by creaming. As droplets were so small, gravitational forces were negligible. On the contrary, when they showed destabilization the main mechanism was flocculation. Stability of nanoemulsions increased with increasing protein concentrations. Nanoemulsions with 3 or 4wt% NaCas were slightly turbid systems that remained stable for at least two months. According to SAXS and Turbiscan results, aggregates remained in the nano range showing small tendency to aggregation. In those systems, interactive forces were weak due to the small diameter of flocs.

The enhanced stability and biodegradation of dispersed crude oil droplets by Xanthan Gum as an additive of chemical dispersant

It is necessary for chemical dispersant to disperse oil effectively and maintain the stability of oil droplets. In this work, Xanthan Gum (XG) was used as an environmentally friendly additive in oil dispersant formulation to enhance the stability and biodegradation of dispersed crude oil droplets. When XG was used together with chemical dispersant 9500A, the dispersion effectiveness of crude oil in artificial sea water (ASW) and the oil droplet stability were both greatly enhanced. In the presence of XG, lower concentration of 9500A was needed to achieve the effective dispersion and stabilization. In addition to the enhancement of dispersion and stabilization, it was found that the biodegradation rate of crude oil by bacteria was dramatically enhanced when a mixture of 9500A and XG was used as a dispersant. Because of the low environmental impact of XG, this would be a potential way to formulate the dispersant with lower toxicity.

Development and characterization of functional O/W emulsions with chia seed (Salvia hispanica L.) by-products

The present work investigated the physicochemical properties of O/W emulsions containing functional ingredients (oil with high ω-3 fatty acid content, protein and/or soluble fiber) from chia seeds. The effect of different protein-carbohydrate combinations (sodium caseinate and lactose, sodium caseinate and maltodextrin, chia protein-rich fraction and maltodextrin) and the presence of chia mucilage (0 and 0.2 % wt/wt) in the aqueous phase of chia O/W emulsions was studied as a function of droplet size distribution, Sauter mean diameter, ζ-potential, rheological properties and backscattering profiles. The use of sodium caseinate in combination with lactose or maltodextrin produced chia O/W emulsions with small droplet size (0.22-0.27 µm), high degree of uniformity in droplet size distribution, negatively charged droplets (at pH 6.5), pseudoplastic behavior and high physical stability. Emulsions with chia protein-rich fraction presented wider droplet size distribution and higher D[3,2] values than the previous ones, recording a Newtonian behavior. The addition of chia mucilage affected the physicochemical properties studied, mainly the rheological characteristics of emulsions.

The Role of Endogenous Lipids in the Emulsifying Properties of Cocoa

This paper describes a study in which the emulsifying properties of cocoa material with and without its lipid fraction were explored. This study was motivated by the commercial interest in naturally-occurring particulate emulsifiers as opposed to the chemically modified emulsifying particles presently available for commercial use. The hypothesis was that endogenous lipids from cocoa were responsible for driving the formation of stable oil-in-water (o/w) emulsions. The data presented includes relative quantification of phospholipids from different commercially available cocoa material using ³¹P NMR spectroscopy and analyses of the emulsifying power of delipidified cocoa material. The commercially available cocoa material comprised several phospholipids, with phosphatidylcholine being the most abundant in all samples. Dispersions of delipidified cocoa material were found to drive the formation of o/w emulsions despite the absence of lipids. We therefore concluded that the emulsifying behavior of cocoa material is not entirely reliant upon the endogenous lipids. This suggests that cocoa material may have a new and potentially widespread use in industrial food preparation and may inform manufacturing strategies for novel food grade emulsifiers.

Thyme oil nanoemulsions coemulsified by sodium caseinate and lecithin

Many nanoemulsions are currently formulated with synthetic surfactants. The objective of the present work was to study the possibility of blending sodium caseinate (NaCas) and lecithin to prepare transparent thyme oil nanoemulsions. Thyme oil was emulsified using NaCas and soy lecithin individually or in combination at neutral pH by shear homogenization. The surfactant combination improved the oil content in transparent/translucent nanoemulsions, from 1.0% to 2.5% w/v for 5% NaCas with and without 1% lecithin, respectively. Nanoemulsions prepared with the NaCas-lecithin blend had hydrodynamic diameters smaller than 100 nm and had significantly smaller and more narrowly distributed droplets than those prepared with NaCas or lecithin alone. Particle dimension and protein surface load data suggested the coadsorption of both surfactants on oil droplets. These characteristics of nanoemulsions minimized destabilization mechanisms of creaming, coalescence, and Ostwald ripening, as evidenced by no significant changes in appearance and particle dimension after 120-day storage at 21 °C.

Effect of calcium salts and surfactant concentration on the stability of water-in-oil (w/o) emulsions prepared with polyglycerol polyricinoleate

The objective of this work was to obtain water-in-oil (w/o) emulsions with polyglycerol polyricinoleate (PGPR) as emulsifier and to study the effect of the addition of calcium in the dispersed aqueous phase on the stability of these systems. Emulsions were formulated with 0.2, 0.5 and 1.0% w/w PGPR and 10% w/w water containing calcium chloride at varied concentrations or other salts (calcium lactate or carbonate; sodium, magnesium or potassium chloride). The stability of these systems was studied with a vertical scan analyzer during 15 days; coalescence and sedimentation were observed as simultaneous destabilization processes. The increase of PGPR concentration and/or calcium chloride content gave more stable emulsions. The stabilizing effect of calcium salt was attributed to the diminution of the water droplets size, the decrease of the attractive force between water droplets and the increase of the adsorption density of the emulsifier. The viscoelastic parameters of the interfacial film were decreased with increasing calcium and PGPR concentrations. Calcium chloride produced a higher increase of stability than calcium salts with lower dissociation degree. The presence of any assayed salt in the aqueous phase also allowed the stabilization of w/o emulsions with higher water contents.