Resolving an Enhanced Oil Recovery Challenge: Optimum Formulation of a Surfactant-Oil–Water System Made Insensitive to Dilution

A methodology for measuring the characteristic curvature of technical-grade ethoxylated nonionic surfactants: the effects of concentration and dilution

Characterization of the behaviour of commercially available non-ionic surfactants has received considerable attention due to their efficacy in a variety of applications. The main challenge in the application of these types of surfactants is that the hydrophilicity of the surfactant varies with concentration and dilution due to the polydispersity of the ethylene oxide groups. The hydrophilicity of a surfactant can be quantified by the characteristic curvature (Cc) parameter of the hydrophilic–lipophilic difference (HLD) framework. In this work, a model based on natural logarithmic regression was developed to calculate the Cc value of commercial surfactants as a function of surfactant concentration by a fast and simple phase scan. The slope of the Cc curve and the measured Cc at a reference concentration were used to develop the model. The Cc values determined with the model agreed with the measured values from the phase scans. Furthermore, the linear mixing rule proved to be reliable for mixtures of polydisperse ethoxylated surfactants. Finally, the impact of the water-to-oil ratio on the Cc was evaluated and the implications were discussed.

Highly Ca2+-Ion-Tolerant Biobased Zwitterionic Surfactant with High Interfacial Activity

The wide application of surfactants has a harmful effect on the environment, drawing more attention to the development and application of low-toxicity surfactants. A salt-tolerant and low-toxicity biobased zwitterionic surfactant, N,N-dimethyl-N-[2-hydroxy-3-sulfo-propyl]-N-benzyloxyoctadecanoyl-1,3-propanediamine (SPBOPA), was prepared from the oleic acid extracted from waste oils and anise ether extracted from the tarragon. The final surfactant structure was confirmed using gas chromatography-mass spectrometry (GC-MS), liquid chromatography-mass spectrometry (LC-MS), and ¹H nuclear magnetic resonance (NMR) spectroscopy. The SPBOPA surfactant could reduce the interfacial tension between crude oil and formation brine to ultralow (5.2 × 10^-4 mN/m) at a low dosage without extra alkali. It still had good interfacial properties in NaCl up to 60 g/L, Ca²⁺ up to 2000 mg/L, and temperature up to 100 °C. Furthermore, SPBOPA had strong antidilution and antiadsorption properties with low toxicity as demonstrated by the high LD₅₀ value of >5000 mg/kg·BW. It could also enhance the wetting ability of crude oil surfaces. Meanwhile, it showed a high biodegradability in the environment. All of the results achieved in this work confirmed that the SPBOPA surfactant is a more robust and promising biobased surfactant candidate than traditional surfactants as an eco-friendly surfactant for enhanced oil recovery (EOR).

Formulation Improvements in the Applications of Surfactant-Oil-Water Systems Using the HLDN Approach with Extended Surfactant Structure

Soap applications for cleaning and personal care have been used for more than 4000 years, dating back to the pharaonic period, and have widely proliferated with the appearance of synthetic surfactants a century ago. Synthetic surfactants used to make macro-micro-nano-emulsions and foams are used in laundry and detergency, cosmetics and pharmaceuticals, food conditioning, emulsified paints, explosives, enhanced oil recovery, wastewater treatment, etc. The introduction of a multivariable approach such as the normalized hydrophilic–lipophilic deviation (HLD _N) and of specific structures, tailored with an intramolecular extension to increase solubilization (the so-called extended surfactants), makes it possible to improve the results and performance in surfactant–oil–water systems and their applications. This article aims to present an up-to-date overview of extended surfactants. We first present an introduction regarding physicochemical formulation and its relationship with performance. The second part deals with the importance of HLD _N to make a straightforward classification according to the type of surfactants and how formulation parameters can be used to understand the need for an extension of the molecule reach into the oil and water phases. Then, extended surfactant characteristics and strategies to increase performance are outlined. Finally, two specific applications, i.e., drilling fluids and crude oil dewatering, are described.

How to Use the Normalized Hydrophilic-Lipophilic Deviation (HLDN) Concept for the Formulation of Equilibrated and Emulsified Surfactant-Oil-Water Systems for Cosmetics and Pharmaceutical Products

The effects of surfactant molecules involved in macro-, mini-, nano-, and microemulsions used in cosmetics and pharmaceuticals are related to their amphiphilic interactions with oil and water phases. Basic ideas on their behavior when they are put together in a system have resulted in the energy balance concept labeled the hydrophilic-lipophilic deviation (HLD) from optimum formulation. This semiempirical equation integrates in a simple linear relationship the effects of six to eight variables including surfactant head and tail, sometimes a cosurfactant, oil-phase nature, aqueous-phase salinity, temperature, and pressure. This is undoubtedly much more efficient than the hydrophilic-lipophilic balance (HLB) which has been used since 1950. The new HLD is quite important because it allows researchers to model and somehow predict the phase behavior, the interfacial tension between oil and water phases, their solubilization in single-phase microemulsion, as well as the corresponding properties for various kinds of macroemulsions. However, the HLD correlation, which has been developed and used in petroleum applications, is sometimes difficult to apply accurately in real cases involving ionic–nonionic surfactant mixtures and natural polar oils, as it is the case in cosmetics and pharmaceuticals. This review shows the confusion resulting from the multiple definitions of HLD and of the surfactant parameter, and proposes a “normalized” Hydrophilic-Lipophilic Deviation (HLDN) equation with a surfactant contribution parameter (SCP), to handle more exactly the effects of formulation variables on the phase behavior and the micro/macroemulsion properties.

Properties of Binary Surfactant Mixtures of Anionic Gemini Surfactant and Amphoteric Surfactant

The surface tension of the mixed system of linear alkylated diphenylmethane sulfonate and amphoteric surfactant didodecylmethylcarboxyl betaine along with their different combinations has been investigated in 0.1 M salt solutions at 313 K. The surface chemical parameters of the mixture were also calculated. The results show that the critical micelle concentration (CMC) and γCMC of the mixture are always lower than those of the individual surfactants, which indicates synergistic effects between the surfactant molecules. The interfacial tension of the Chinese Shengli crude oil and the connate water can be reduced to 5 × 10−3 mN · m−1 at 70°C with the mixture of alkylated diphenylmethane sulfonate and didodecylmethylcarboxyl betaine.

How to Attain an Ultralow Interfacial Tension and a Three-Phase Behavior with a Surfactant Formulation for Enhanced Oil Recovery: A Review. Part 2. Performance Improvement Trends from Winsor's Premise to Currently Proposed Inter- and Intra-Molecular Mixtures

The minimum interfacial tension occurrence along a formulation scan at the so-called optimum formulation is discussed to be related to the interfacial curvature. The attained minimum tension is inversely proportional to the domain size of the bicontinuous microemulsion and to the interfacial layer rigidity, but no accurate prediction is available. The data from a very simple ternary system made of pure products accurately follows the correlation for optimum formulation, and exhibit a linear relationship between the performance index as the logarithm of the minimum tension at optimum, and the formulation variables. This relation is probably too simple when the number of variables is increased as in practical cases. The review of published data for more realistic systems proposed for enhanced oil recovery over the past 30 years indicates a general guidelines following Winsor's basic studies concerning the surfactant-oil-water interfacial interactions. It is well known that the major performance benefits are achieved by blending amphiphilic species at the interface as intermolecular or intramolecular mixtures, sometimes in extremely complex formulations. The complexity is such that a good knowledge of the possible trends and an experienced practical know-how to avoid trial and error are important for the practitioner in enhanced oil recovery.