Does fluoroscopy improve acetabular component placement in total hip arthroplasty?

Fluoroscopy Versus Imageless Optical Navigation in Direct Anterior Approach Total Hip Arthroplasty

BACKGROUND

Utilization of the direct anterior approach (DAA) for total hip arthroplasty (THA) has risen in popularity. Accurate implant placement is a critical factor that influences patient outcomes. The goal of this study was to compare the accuracy and precision of fluoroscopy with imageless optical navigation in DAA THA.

METHODS

This was a cohort study of 640 consecutive primary DAA THAs performed with intraoperative fluoroscopy (n = 300 patients) or imageless optical navigation (n = 304 patients). Accuracy was compared by measuring acetabular cup inclination, anteversion, and leg-length discrepancy (LLD). The proportion of implants placed within the Lewinnek safe zone and those placed within a more precise target of 40 ± 5° inclination and 20 ± 5° anteversion was evaluated.

RESULTS

According to the Lewinnek criteria, there was no difference in the percentage of implants placed within both inclination and anteversion targets (fluoroscopy: 90.3%; navigation: 88.8%, P = 0.519). Using the more precise targets, navigation increased the implants positioned correctly for both inclination and anteversion (fluoroscopy: 50.3%; navigation: 65.6%, P < 0.001). Navigation increased the proportion of implants positioned within the target anteversion zone (fluoroscopy: 71.3%; navigation: 83.8%, P < 0.001) but not inclination (fluoroscopy: 71.9%; navigation: 76.9%, P = 0.147). The mean LLD was higher with the use of fluoroscopy compared with navigation (5.5 mm, standard deviation: 4.1; 4.6 mm, SD: 3.4, P < 0.005). No difference in dislocation rate was observed ( P = 0.643).

CONCLUSION

Both fluoroscopy and imageless optical navigation demonstrated accurate acetabular implant positioning during DAA THA. Navigation was more precise and associated with improved acetabular anteversion placement and restoration of LLD. Navigation is an accurate alternative to fluoroscopy with decreased radiation exposure.

Clinical application of artificial intelligence-assisted three-dimensional planning in direct anterior approach hip arthroplasty

PURPOSE

The objective of this study was to investigate the efficacy of an artificial intelligence-assisted 3D planning system (AIHIP) in total hip arthroplasty by direct anterior approach and assess the reliability of the AIHIP preoperative program in terms of both interobserver and intraobserver agreement.

METHODS

A retrospective analysis was conducted on patients who underwent unilateral primary THA via direct anterior approach from June 2019 to March 2022. Participants were randomly assigned to receive either the AIHIP system (n = 220) or the 2D template (control group) (n = 220) for preoperative planning. The primary outcome aimed to evaluate the correspondence between the prosthesis selected intro-operation and the one planned preoperatively, as well as to calculate the intraclass correlation coefficient (ICC). Secondary outcomes included operation time, intraoperative blood loss, fluoroscopy times, Harris hip score (HHS), lower limb length difference (LLD), femoral offset (FO), and bilateral femoral offset difference.

RESULTS

No significant differences were observed in gender, age, body mass index (BMI), aetiology, and American Society of Anesthesiologists (ASA) score between the two groups. Both planning methods exhibited good intraobserver agreement for component planning (ICC: 0.941-0.976). Interobserver agreement for component planning was comparable between the two methods (ICC: 0.882-0.929). In the AIHIP group, the accuracy of acetabular cup and femoral stem prosthetics planning significantly improved, with accuracies within the size range of ± 0 and ± 1 being 76.8% and 90.5% and 79.5% and 95.5%, respectively. All differences between two groups were statistically significant (p < 0.05). Patients receiving AIHIP preoperative planning experienced shorter operation times, reduced intraoperative blood loss, fewer fluoroscopy times, and lower leg length discrepancy (LLD) (p < 0.05). Moreover, they demonstrated a higher Harris hip score (HHS) at three days post-surgery (p < 0.05). However, no significant differences were found in femoral offset (FO), difference of bilateral femoral offsets, and HHS at 1 month after the operation.

CONCLUSION

Utilizing AIHIP for preoperative planning of direct anterior approach THA can significantly enhance the accuracy of prosthetic sizing with good reliability, decrease operation time, reduce intraoperative blood loss, and more effectively restore the length of both lower limbs. This approach has greater clinical application value.

Gender differences in cementless short stem total hip arthroplasty: significantly higher femoral lengthening in female patients

Modern cementless short stems in total hip arthroplasty (THA) enable a precise reconstruction of the native pre-arthritic hip geometry. While gender differences have been reported for older generation straight hip stems, there are hardly reports regarding modern cementless short hip stems. Therefore, we aimed to evaluate the influence of gender differences in hip anatomy in cementless short stem THA. A total of 207 patients (109 females, 98 males) with unilateral THA and absence of contralateral joint space narrowing (Kellgren-Lawrence grade ≤ 2) were included. Acetabular height and offset as well as femoral height and offset were measured on pre- and 3-months-postoperative anteroposterior X-rays of the pelvis and compared to the contralateral hip. Additionally, implant position was evaluated on the postoperative radiograph. In male patients, the loss of acetabular offset was significantly greater than in females (p = 0.012), leading to a compensatory increase in femoral offset (p = 0.041). Femoral height discrepancy was significantly higher in females (p < 0.001), accounting for an increased global hip height discrepancy (p < 0.001). The mean acetabular anteversion was significantly greater in female patients (p < 0.001). Female patients are at higher risk of femoral lengthening in THA with a cementless short stem potentially caused by a further proximally conducted femoral neck osteotomy and show significantly higher cup anteversion angles. Therefore, surgeons should take special care to the level of neck resection and implant positioning in female patients.

Fluoroscopy-guided direct anterior approach total hip arthroplasty provides more accurate component positions in the supine position than in the lateral position

PURPOSE

The position of the acetabular and femoral components is critical for stability and wear resistance. The aim of this study is to investigate whether the fluoroscopy-guided direct anterior approach in the supine position (S-DAA) is more helpful in improving the position of acetabular and femoral components than the fluoroscopy-guided direct anterior approach in the lateral decubitus position (L-DAA).

METHODS

A retrospective analysis of 76 cases of fluoroscopy-guided direct anterior approach total hip arthroplasty (38 cases in the S-DAA and 38 cases in the L-DAA group) was performed in one hospital from 2019 to 2021. The differences in inclination, anteversion, femoral offset (FO), global offset (GO), and leg length discrepancy (LLD) measurements during and after surgery were analyzed. The postoperative femoral offset (FO), global offset (GO), leg length discrepancy (LLD), and preoperative and postoperative Harris hip score were compared between the two groups.

RESULTS

In the S-DAA group, there were no significant differences in the mean intraoperative inclination angle anteversion angle, FO, GO, and LLD compared to the postoperative values, whereas in the L-DAA group, there were significant differences between the intraoperative and postoperative measurements (P < 0.001, P = 0.009, P＜0.001, P＜0.001 and P = 0.008, respectively). Additionally, there were significant differences in the accuracy of LLD, FO, and GO between the two groups (P < 0.001). Compared with the L-DAA group, the average differences of inclination, anteversion, LLD, FO, and GO during and after operation in the S-DAA group were smaller, and the consistency was higher. There was a significant difference in Harris hip score between the two groups at 1 week after surgery (P = 0.033). There was no significant difference in Harris hip score between 1 month and 3 months after surgery (P = 0.482 and P = 0.797, respectively).

CONCLUSIONS

In the supine group, the direct anterior approach (DAA) provides more accurate positioning of the acetabular and femoral components. However, there was no significant difference in hip joint function and activity between the two groups at follow-up.

Contemporary, non-navigation, cup orientation techniques improve accuracy and eliminate differences seen between the anterior and posterior approach in THA

BACKGROUND

This study aimed to: (1) Determine the ability to achieve the surgeons' desired cup orientation, without navigation, using contemporary measures with the anterior- (AA) and posterior- approaches (PA); and (2) assess whether surgical approach is associated with cup orientation accuracy, as previously reported, when contemporary measures are used.

METHODS

A prospective, 2-centre, multi-surgeon study of 400 THAs (200 AA; 200 PA) was performed. Intraoperative radiographs were obtained with the AA. A digital inclinometer and 3-point pelvic support were used with the PA. With the PA, intraoperative cup inclination at impaction was recorded. Radiographic inclination/anteversion (RI/RA) was measured from intraoperative radiographs (AA-only) and from postoperative radiographs for all cases. Optimum inclination/anteversion was defined as 40°/20° (±10°). The difference between intra- and postoperative orientations allowed for determination of the difference in pelvic position at impaction.

RESULTS

Optimum RI and RA were achieved in 91.3% (n = 365) and 92% (n = 368) of cases respectively. Optimum cup orientation was detected in 84% of cases (n = 336). There was equivalent ability to achieve cup orientation between approaches (AA: 82.5% vs. PA: 85.5%; p = 0.41). The use of an inclinometer in the PA was associated with a smaller variability of inclination at implantation (10° vs. 14°) and counteracted the greater difference in pelvic position (4.4° vs. 2.1°) seen with the PA.

CONCLUSIONS

Over 80% of cases can have optimum orientation without navigation, using simple, cheap contemporary measures. Such measures eliminate differences between approaches, related to patient position. Narrower implantation angles will further reduce variability in cup orientation achieved.

Influence of obesity and intra-operative imaging guidance technology on acetabular cup positioning in total hip arthroplasty

BACKGROUND

Accuracy of acetabular cup positioning during total hip arthroplasty (THA) can be improved with intra-operative imaging but may be influenced by body mass index (BMI). This study assessed the influence of BMI (kg/m2) on cup accuracy when using intra-operative fluoroscopy (IF) alone or supplemented with a commercial product.

METHODS

This retrospective review included four consecutive cohorts of patients having undergone anterior approach THA with IF alone (2011-2015), IF and Overlay (2015-2016) (Radlink Inc., Los Angeles, CA), IF and Grid (2017-2018) (HipGrid Drone™, OrthoGrid Systems Inc., Salt Lake City, UT) and IF and Digital (2018-2020) (OrthoGrid Phantom®, OrthoGrid Systems, Inc., Salt Lake City, UT). Component placement accuracy was measured on 6-week post-operative weight bearing radiographs and compared between four BMI patient groups (BMI ≤ 25, 25 < BMI ≤ 30, 30 < BMI ≤ 35, and 35 < BMI). Total fluoroscopy times were also recorded directly from the fluoroscopy unit.

RESULTS

Abduction angle significantly increased as BMI increased (p = 0.003) with IF alone but no difference was present in groups with guidance technology. Anteversion was significantly different between BMI groups for IF alone (p = 0.028) and Grid (p = 0.027) but was not different in Overlay (p = 0.107) or Digital (p = 0.210). Fluoroscopy time was significantly different between BMI categories for IF alone (p = 0.005) and Grid (p = 0.018) but was not different in Overlay (p = 0.444) or Digital (p = 0.170).

CONCLUSION

Morbid obesity (BMI > 35) increases risk for malpositioning of acetabular cups and increases surgical time with IF alone or the Grid. Additional IF guidance technology (Overlay or Digital) increased cup positioning accuracy without decreasing surgical efficiency.

Accuracy of Leg Length and Hip Offset Measurements Using a Fluoroscopic Grid During Anterior Approach Total Hip Arthroplasty

Background

Minimizing leg length (LLD) and hip offset (OD) discrepancies is critical for tissue tension and implant longevity in total hip arthroplasty (THA). The direct anterior approach (DAA) helps surgeons recreate these values under fluoroscopy. Several methods to accomplish this have been described, with no consensus on which is superior. This study evaluated the ability to minimize LLD and OD using a surgeon-controlled, adjustable fluoroscopic grid. We hypothesized that this tool would recreate parameters to within 10 mm of the contralateral side.

Methods

One hundred eleven primary THAs performed with an adjustable radiopaque grid to equalize leg length and hip offset were retrospectively reviewed. These values were measured on postoperative radiographs and compared to the contralateral hip. Patients were excluded if they had inadequate imaging, revision arthroplasty, preexisting deformities, or underwent approaches other than DAA.

Results

Mean age was 59.1 ± 11.1 years, 63.1% of patients were female, and average body mass index was 27.8 ± 7.0. Mean LLD was 3.7 ± 3.0 mm, while mean OD was 4.6 ± 3.6 mm. 95.5% of hips showed LLD < 10 mm, while 93.7% of hips had OD < 10 mm. Furthermore, 76.6% of hips had LLD < 5 mm, while 62.2% of hips had OD < 5 mm.

Conclusions

The described technique restored limb length and hip offset during DAA THA. This technique yields consistent results and offers an inexpensive alternative to costly digital software and more cumbersome fixed grid systems.

Prosthetic Hip Dislocations in Direct Anterior versus Posterior Approach in Patients with Instrumented Lumbar Fusion

BACKGROUND

Instrumented Posterior Lumbar Spinal Fusion (IPLSF) has been demonstrated to contribute to instability following Total Hip Arthroplasty (THA). It is unclear whether a supine Direct Anterior (DA) approach reduces the risk of instability.

METHODS

A retrospective review of 1,773 patients who underwent THA through either a DA approach or a posterior approach at our institution over a 7-year period. Radiographic and chart review were then used to identify our primary group of interest comprised of 111 patients with previous IPLSF. Radiographic review, chart review, and phone survey was performed. Dislocation rates in each approach group were then compared within this cohort of patients with IPLSF.

RESULTS

Within the group of patients with IPLSF, 33.3% (n=37) received a DA approach while 66.6% (n=74) received a posterior approach. None of the 9 total dislocations in the DA group had IPLSF, whereas 4 of the 16 total dislocations in the posterior approach group had IPLSF (p=0.78). When examining the larger group of patients, including those without IPLSF, patients undergoing a DA approach had a lower BMI and were likely have a smaller head size implanted (p<0.001 for both). Using Fischer's exact test, fusion was associated with dislocation in the posterior approach group (p<0.01), whereas fusion was not associated with dislocation in the anterior approach group (p=1.0).

CONCLUSIONS

While there was no significant difference in dislocation rates between posterior and anterior approach groups, in patients with IPLSF, the anterior approach had a lower percentage of dislocation events compared to the posterior approach.

Digital templating cementless short stem total hip arthroplasty: is there a difference in planning adherence between the direct anterior approach and minimally invasive anterolateral approach?

PURPOSE

Minimally invasive approaches (MIS) in total hip arthroplasty (THA) show inconsistent findings regarding planning adherence in digital templating. The purpose of this study is to evaluate any difference in planning adherence between the direct anterior approach (DAA) and an anterolateral MIS approach (AL MIS) in cementless short stem THA.

METHODS

A single surgeon series of 222 THAs in 208 patients with an uncemented short curved stem and a bi-hemispherical acetabular cup were screened for inclusion. A total of 118 THAs were implanted via the DAA and 72 THAs via the AL MIS were included. The planning adherence for the offset option, stem size and the acetabular cup were retrospectively evaluated.

RESULTS

Planning adherence for cup size (perfect match: p = 0.763; ± 1 size: p = 0.124), offset option (0.125) and stem size (perfect match: p = 0.275; ± 1 size: p = 0.552) did not show any statistical significance. Preoperative diagnosis of avascular necrosis of the femoral head in AL MIS approach (OR 6.045; CI 1.153-31.696) or mild hip dysplasia in the general cohort poses (OR 11.789; CI 1.386-100.293) a significant risk for inadequate prediction of the offset option.

CONCLUSION

digital templating for THA with an uncemented short curved stem and a bi-hemispherical acetabular cup show comparable results between a direct anterior approach and a minimally invasive anterolateral approach in supine position. Surgeons should be aware of a low planning adherence for this type of short stem in minimally invasive approaches.

CONCLUSION

Digital templating for THA with an uncemented short curved stem and a bi-hemispherical acetabular cup show comparable results between a direct anterior approach and a minimally invasive anterolateral approach in supine position. Surgeons should be aware of a low planning adherence for this type of short stem in minimally invasive approaches.

Does fluoroscopy improve baseplate position compared to conventional technique in reverse shoulder arthroplasty? A preliminary study

Background

Accurate placement of glenoid component in reverse shoulder arthroplasty remains a challenge for surgeons of all levels of expertise; however, no studies have evaluated the utility of fluoroscopy as a surgical assistance method.

Methods

Prospective comparative study of 33 patients undergoing primary reverse shoulder arthroplasty during a 12-month period. Fifteen patients had a baseplate placed using the conventional "free hand" technique (control group), and 18 patients using intraoperative fluoroscopy assistance group, in a case-control design. Postoperative glenoid position was evaluated on postoperative Computed Tomography (CT) scan.

Results

The mean deviation of version and inclination for fluoroscopy assistance vs. control group was 1.75° (0.675-3.125) vs. 4.2° (1.975-10.45) (p = .015), and 3.85° (0-7.225) vs. 10.35° (4.35-18.75) (p = .009). The distance from the central peg midpoint to the inferior glenoid rim (fluoroscopy assistance 14.61 mm/control 4.75 mm, p = .581) and the surgical time (fluoroscopy assistance 1.93 ± 0.57/control 2.18 ± 0.44 h, p = .400) showed no differences, with an average radiation dose of 0.45 mGy and fluoroscopy time of 14 s.

Conclusions

Accurate axial and coronal scapular plane positioning of glenoid component is improved with intraoperative fluoroscopy at the cost of a greater radiation dose and without differences in surgical time. Comparative studies are needed to determine whether their use in relation to more expensive surgical assistance systems result in similar effectiveness.L evel of evidence : Level III, therapeutic study.

Accuracy of acetabular cup placement during anterolateral supine total hip arthroplasty using intraoperative fluoroscopy: a retrospective study

BACKGROUND

In our institution, total hip arthroplasty (THA) is performed using the anterolateral supine (ALS) approach with intraoperative fluoroscopy. This study aimed to investigate and review the accuracy of acetabular cup placement in ALS-THA using intraoperative fluoroscopy.

METHODS

A total of 142 patients with 154 joints (mean age 64.3 years, 30 males and 112 females) underwent ALS-THA with intraoperative fluoroscopy at the same institution. The target angle of the cup position was set at 40° for radiographic inclination (RI) and 5°-25° for radiographic anteversion (RA) based on the functional pelvic plane according to the pelvic motion during individual postural changes. The cup position angle was measured using postoperative computed tomography, and the error in the target angle was investigated.

RESULTS

The target angle of RI was 40°, and the postoperative RI was 39.3° ± 4.3°. The target angle of the RA was 17° ± 2.6°, and the postoperative RA was 20.6° ± 3.7°. The absolute values of the error from the target angle were 3.6° ± 2.5° for RI and 4.2° ± 3.3° for RA. For RI and RA, 67.5% (104/154 joints) were within ± 5° of the target and 96.1% (148/154 joints) were within ± 10°.

CONCLUSIONS

The accuracy of cup positioning in ALS-THA using intraoperative fluoroscopy was good and appeared comparable to that of various navigation systems.

High varus stem alignment in short-stem total hip arthroplasty: a risk for reconstruction of femoro-acetabular offset, leg length discrepancy and stem undersizing?

PURPOSE

Short stems are increasingly used in in total hip arthroplasty (THA) because of advantages in bone and soft tissue preservation and reconstruction of hip geometry. Short stems can be inserted in a more varus position compared to conventional straight stems. This poses the risk of final varus misplacement of the femoral component, which is not intended in all femoral short stems.

METHODS

We wanted to evaluate the effect of a high varus stem positioning in MIS THA on hip offset, leg length and femoral canal fill index. A series of 1052 consecutive THAs with a singular cementless femoral short stem and press-fit cup was retrospectively screened for inclusion. One hundred six patients with unilateral THA and a contralateral healthy hip met the inclusion criteria. Measurements were carried out on preoperative and 3 months anterior-posterior postoperative radiographs. Patients were divided into Group A (varus stem alignment ≤ 3°) and Group B (varus stem alignment > 3°).

RESULTS

Hip offset (HO) increased significantly in Group B by 4 mm (p = 0.013). No influence on leg length difference was detected in both groups. Preoperative CCD angle was significantly lower in Group B (p < 0.001). Canal Fill Indices (CFI) were significantly lower in Group B (CFI I: p < 0.001; CFI II p = 0.003; CF III p = 0.002).

CONCLUSION

High varus stem alignment > 3° leads to a statistically significant but minor increase in HO and poses the risk of stem undersizing. A preoperatively low genuine CCD angle pose a risk for varus stem positioning.

Improved hip symmetry with an adjustable fluoroscopic grid during total hip arthroplasty

BACKGROUND

The use of intraoperative fluoroscopy (IF) is common with direct anterior total hip arthroplasty (THA), however image distortion in IF may limit its usefulness. The supplementation of IF with an adjustable grid (AG) may provide consistently better accuracy in component placement. Therefore, the purpose of this study was to compare the accuracy, consistency, and surgical efficiency between IF only and AG supplementation.

METHODS

2 cohorts were retrospectively evaluated, including 573 IF only patients and 211 AG patients having undergone unilateral THA between 2011 and 2018. Post-THA radiographic assessment was performed to evaluate the accuracy of component placement, with target placements for global hip offset (GHO) and leg-length differences (LLD) <10 mm and acetabular cup abduction of 45° (±10°). Accuracy and surgical efficiency were evaluated between groups and over time.

RESULTS

The AG group had a significant greater percentage of components placed within the target zone compared to IF only for GHO (99.5%, 92.7%, p < 0.001), LLD (99.1%, 96.5%, p = 0.039) and abduction (99.5%, 96.3%, p = 0.009), with no difference in fluoroscopic time (p = 0.973). Over time, accuracy was significantly different in IF group for GHO (p = 0.008) and abduction (p = 0.002) and trended toward significance for LLD (p = 0.055). There were no significant differences over time for the AG group.

CONCLUSIONS

The addition of an AG to IF significantly increased the accuracy of component placement during direct anterior THA. These results were consistent over 2 years of use and did not decrease surgical efficiency.

Compared learning curves of the direct anterior and anterolateral approach for minimally invasive hip replacement

Minimally invasive hip arthroplasty becomes increasingly popular. It is technically challenging and the approaches used are associated with a considerable learning curve. This nurtures concerns regarding patient safety, surgical training, and cost effectiveness. Consequently, we initiated a study comparing the learning curves of a supervised trainee surgeon utilizing both the anterolateral and direct anterior approach (DAA) when introduced to minimally invasive hip replacement surgery. Outcome measurements included the Harris hip score (HHS), cup inclination and anteversion, offset and leg length, stem placement, surgical time and complications. Time from incision to suture decreased significantly over time but did not differ between both groups. The functional outcomes (HHS) after six weeks and three months were comparable (p=0.069 and 0.557) and within the expected range equalling 90.3 (anterior) and 89.2 (anterolateral) points. With both approaches safe component placement was readily achieved. Both offset and leg length, however, were reconstructed more reliably with the DAA (p=0.02 and 0.001). A higher rate of dislocations was seen with the anterior, more perioperative infections with the anterolateral approach. We suggest that supervision by an experienced surgeon favourably influences the learning curves for both the minimally invasive DAA and anterolateral approach and conclude that the greatest improvement is seen within the first 60 cases.

Occupational Hazards to the Joint Replacement Surgeon: Radiation Exposure

BACKGROUND

Intraoperative fluoroscopy is an essential tool to assist orthopedic surgeons in accurately and safely implanting hardware. In arthroplasty cases, its use is on the rise with the increasing popularity of the direct anterior (DA) approach for THA. However, exposure of ionizing radiation poses a potential health risk to surgeons. While the benefits of intraoperative fluoroscopy in DA THA is becoming clearer, and are well-described in the literature, the potential health dangers associated with career-long cumulative radiation exposure are rarely discussed.

METHODS

In this article, we review the available literature to discuss radiation safety in orthopedics with a focus on total joint arthroplasty. We present the basic science of radiation, discuss the amount of radiation exposure in orthopedic surgery, and review the potential health risks associated with long-term exposure.

CONCLUSION

Overall, the radiation dose exposure to arthroplasty surgeons is low and within recommendations for occupation exposure limits. However, due to the stochastic health impacts of ionizing radiation, there is no threshold dose below which radiation exposure is truly safe. Therefore, it is imperative that surgeons practice proper fluoroscopy safety habits, such as wearing proper protective equipment, minimizing fluoroscopy time and magnification, and maximizing distance from the radiation source to minimize the life-long cumulative radiation exposure and associated health risks.

Improved accuracy and fewer outliers with a novel CT-free robotic THA system in matched-pair analysis with manual THA

Accurate component orientation and restoration of hip biomechanics remains a continuing challenge in total hip arthroplasty (THA). The goal of this study was to analyze the accuracy/reproducibility of a novel CT-free and pin-less robotic-assisted THA (RA-THA) platform compared to manual THA (mTHA). This matched-pair cadaveric study compared this RA-THA system to mTHA (n = 33/arm), both using the assistance of fluoroscopic imaging, in a group of 14 high-volume arthroplasty surgeons. In both groups, surgeons were asked to aim for 40°/15° for cup inclination/version, and 0 mm of leg length discrepancy (LLD). A validated and accurate method using radio-opaque markers measured cup inclination/version and LLD. The accuracy and reproducibility (fewer outliers) of cup inclination was significantly improved in the robotic group (1.8° ± 1.3° vs 6.4° ± 4.9°, respectively, robotic vs manual; p < 0.001), with no significant difference between groups for version. The reproducibility of LLD was significantly improved in the robotic group (p = 0.003). For all parameters studied, the robotic group had an improved accuracy and lower variance (fewer outliers). The percentage of cases within the more restrictive Callanan safe zone was 100% for RA-THA vs 73% for mTHA (p = 0.002). The CT-free RA-THA platform, using only fluoroscopic imaging, demonstrated more accurate acetabular cup positioning, when compared to the mTHA procedures performed by high-volume hip surgeons (naive to this RA-THA platform), with respect to cup inclination and placement within the Lewinnek/Callanan safe zones. Future study must incorporate economic factors, lower volume surgeons, clinical and patient-centric outcomes, and other radiographic parameters in controlled studies in large sample sizes.

A new understanding of radiographic landmarks of the greater trochanter that indicate correct femoral rotation for measurement of femoral offset

Objectives

To establish and validate a novel method for aligning femoral rotation to accurately measure femoral offset for preoperative templating and component sizing, and to identify the physical location of two radiographic lines utilized in the described method.

Materials and methods

Cadaveric proximal femurs were skeletonized and mounted to a biaxial load frame. Two radiographic lines along the greater trochanter were identified fluoroscopically. The femurs were rotated, and images were taken when the lines appeared superimposed, then in 2-degree increments to 10° of internal and external rotation, and at 30°. Radiographic femoral offset was calculated at each angle, and the maximum and aligned offsets were compared. Bone was removed until the radiographic lines disappeared, then a metal wire was inserted in place of the bone to confirm that the lines reappeared.

Results

The physical locations of the radiographic landmarks were on the anterior and posterior aspects of the greater trochanter. The mean true femoral offset was 38.2 mm (range, 30.5–46.3 mm). The mean aligned femoral offset was 37.3 mm (range, 29.3–46.3 mm), a 2.4% underestimation. The mean angle between aligned and true offset was 3.6° of external rotation (range, 10°ER-8°IR). Intra-rater intraclass correlation coefficient was 0.991.

Conclusion

Alignment of the radiographic lines created by the anterior and posterior aspects of the greater trochanter is a reliable and accurate rotational positioning method for measuring true femoral offset when using plain films or fluoroscopy, which can aid surgeons with preoperative templating and intraoperative component placement for total hip arthroplasty.

Component placement accuracy of two digital intraoperative fluoroscopy supplementation systems in direct anterior total hip arthroplasty

INTRODUCTION

Intraoperative fluoroscopy (IF) may increase accuracy of component placement when performing direct anterior approach total hip arthroplasty (THA), however, unguided IF continues to produce inconsistent results. Supplementation of IF, with a digital grid (Grid) system or digital overlay (Overlay), may increase component placement accuracy. The purpose of this study was to compare component placement accuracy following THA when IF was supplemented with the Grid or Overlay technique.

MATERIALS AND METHODS

Acetabular abduction and anteversion, with leg length discrepancy (LLD) and global hip offset (GHO) were retrospectively evaluated for unilateral and bilateral THA patients from 6-week post-operative radiographs. Target component placement were GHO and LLD < 10 mm, abduction 45° ± 10° and anteversion 15° ± 10° for Overlay and 17° ± 10° for Grid. Differences between the Overlay and Grid were determined by univariate analyses.

RESULTS

The Overlay and Grid groups included 178 patients (217 hips) and 262 patients (317 hips), respectively. Target placement with the Overlay and Grid was achieved for GHO in 98.3% and 95.7% of cases (p = 0.108), LLD in 100% and 98.4% of cases (p = 0.121), cup abduction in 98.2% and 97.4% of cases (p = 0.384), and cup anteversion in 97.7% and 71.1% of cases (p < 0.001), respectively. Surgical time was significantly longer in Overlay compared to Grid (Unilateral 77.5 ± 14.1 min and 68.8 ± 12.2; p < 0.001; Bilateral 184.6 ± 27.0 min and 165.5 ± 23.1; p < 0.001, respectively).

CONCLUSION

Although no difference was found between the Grid and the Overlay cohorts for LLD, GHO or abduction angle, the Overlay resulted in greater accuracy for acetabular component anteversion angle, with only a slight decrease in surgical efficiency.

Accuracy and Reliability of Software Navigation for Acetabular Component Placement in THA: An In Vitro Validation Study

Background and Objectives: Intraoperative fluoroscopy can be used to increase the accuracy of the acetabular component positioning during total hip arthroplasty. However, given the three-dimensional nature of cup positioning, it can be difficult to accurately assess inclination and anteversion angles based on two-dimensional imaging. The purpose of this study is to validate a novel method for calculating the 3D orientation of the acetabular cup from 2D fluoroscopic imaging. Materials and Methods: An acetabular cup was implanted into a radio-opaque pelvis model in nine positions sequentially, and the inclination and anteversion angles were collected in each position using two methods: (1) a coordinate measurement machine (CMM) was used to establish a digitalized anatomical coordinate frame based on pelvic landmarks of the cadaveric specimen, and the 3D position of the cup was then expressed with respect to the anatomical planes; (2) AP radiographic images were collected, and a mathematical formula was utilized to calculate the 3D inclination and anteversion based on the 2D images. The results of each method were compared, and interrater and intrarater reliably of the 2D method were calculated. Results: Interrater reliability was excellent, with an interclass correlation coefficient (ICC) of 0.988 (95% CI 0.975–0.994) for anteversion and 0.997 (95% CI 0.991–0.999) for inclination, as was intrarater reliability, with an ICC of 0.995 (95% CI 0.985–0.998) for anteversion and 0.998 (95% CI 0.994–0.999) for inclination. Intermethod accuracy was excellent with an ICC of 0.986 (95% CI: 0.972–0.993) for anteversion and 0.993 (95% CI: 0.989–0.995) for inclination. The Bland–Altman limit of agreement, which represents the error between the 2D and 3D methods, was found to range between 2 to 5 degrees. Conclusions: This data validates the proposed methodology to calculate 3D anteversion and inclination angles based on 2D fluoroscopic images to within five degrees. This method can be utilized to improve acetabular component placing intraoperatively and to check component placement postoperatively.

Femoral Head Autograft Can Reliably Reconstruct Dysplastic Acetabula Through the Direct Anterior Approach for Total Hip Arthroplasty

Background

Bone deficiencies in dysplastic acetabula create technical difficulties during total hip arthroplasty (THA). Bulk femoral head autograft (FHA) is one method to increase cup coverage and bone stock of the true acetabulum; however, only limited data exist on its efficacy through a direct anterior approach (DAA). This study aimed to evaluate the outcomes of FHA during THA via a DAA in dysplastic hips.

Methods

Retrospective review of 34 patients (41 hips) with hip dysplasia (Crowe I-III) who underwent primary THA via a DAA with FHA at a single institution was performed. Surgical procedures were performed on a traction table with intraoperative fluoroscopy and highly porous-coated cup placement in the true acetabulum. Patients were assessed clinically and radiographically at a minimum of 2 years postoperatively (range, 2 to 7).

Results

The average modified Harris Hip Score improved from 31.9 ± 10.8 to 94.1 ± 5.8, Merle d'Aubigné Hip Score from 7.5 ± 2.8 to 16.6 ± 1.1, and visual analog pain score from 7.9 ± 2.7 to 1.4 ± 1.4 (all P < .001). All hips had an “anatomic” inferomedial cup position postoperatively, with an average increase in horizontal coverage of 43.4%. Mean postoperative limb-length discrepancy improved from 21.8 ± 16.1 mm to 1.6 ± 5.7 mm (P < .001). There were no cases of revision THA, nor complications such as dislocation, infection, or osteolysis.

Conclusion

Reconstructing dysplastic acetabula (Crowe I-III) with FHA during THA can be successfully accomplished via the DAA with increased acetabular bone stock and accurate correction of limb-length discrepancy.

Utility of Intraoperative Fluoroscopic Positioning of Total Hip Arthroplasty Components Using a Posterior and Direct Anterior Approach

INTRODUCTION

Positioning of implant components for total hip arthroplasty (THA) is important for polyethylene liner wear, prosthesis joint stability, and range of motion. The introduction of fluoroscopy for the direct anterior approach has been shown to improve physician accuracy for component positioning. Few studies compare the use of intraoperative fluoroscopy for THA component positioning in posterior THA. The purpose of this project is to retrospectively evaluate the effect of intraoperative fluoroscopy on component positioning for THA using posterior and direct anterior approach (DAA).

MATERIALS AND METHODS

A retrospective review of postoperative weight-bearing X-ray films of THAs was performed over a 2-year period where a single fellowship-trained total joint surgeon introduced direct anterior approach into his practice while expanding the intraoperative use of fluoroscopy for all THA procedures, regardless of approach. Component position was evaluated through radiographic measurement of acetabular cup inclination (goal of 40 degrees), limb length discrepancy (goal of 0 mm), and femoral component offset difference (goal of 0 mm). Radiographic analysis was performed by two independent providers. Statistical analysis was performed using Student's t-tests.

RESULTS

A total of 107 patients with an average age of 62 years were identified during the 2-year period surrounding the THA practice change, adding fluoroscopy to posterior and DAA THA. Three cohorts were identified: cohort A: 44 patients who underwent posterior THAs without the use of intraoperative fluoroscopy, cohort B: 35 patients who underwent direct anterior approach THAs with the use of intraoperative fluoroscopy, and cohort C: 18 patients who underwent posterior THAs with the use of intraoperative fluoroscopy. The use of intraoperative fluoroscopy for the posterior approach versus unguided posterior approach increased accuracy of both cup inclination (44 degrees vs 50 degrees, P < .05) and femoral offset (4 mm vs 7 mm, P < .05). A comparison of DAA with fluoroscopy versus posterior approach without fluoroscopy showed improvement in cup inclination (48 degrees vs 50 degrees, P < .05). Fluoroscopy with posterior approach versus fluoroscopy with DAA was found to have improved cup inclination (44 degrees vs 48 degrees, P < .05).

CONCLUSION

Intraoperative use of fluoroscopy can improve component positioning for posterior THA.

Reliability of a simple fluoroscopic image to assess leg length discrepancy during direct anterior approach total hip arthroplasty

BACKGROUND

Direct anterior approach (DAA) total hip arthroplasty (THA) in a supine position provides a unique opportunity to assess leg length discrepancy (LLD) intra-operatively with fluoroscopy. Reported fluoroscopic techniques are useful but are generally complicated or costly. Despite the use of multiple techniques for leg length assessment, LLD continues to be a major post-operative source of patient dissatisfaction further emphasizing the importance of near-anatomic restoration. The utility of an alternative direct measurement of LLD on an intra-operative fluoroscopic pelvic image during DAA THA has not been reported.

AIM

To determine the reliability of a novel simple intra-operative measurement of LLD using a parallel line technique on a single fluoroscopic digital image of the pelvis.

METHODS

One hundred and seventy-one patients who underwent DAA THA were included for analysis. Intra-operative fluoroscopic and post-operative anterior-posterior radiographs were imported to TraumaCad and calibrated for LLD measurement. LLD was measured on each image using the right-left hip differences in lesser trochanter to pelvic reference line distances. Pelvic reference points included the teardrops and ischia. Fluoroscopic LLD was compared to the gold-standard measurement of LLD measured on a post-operative radiograph.

RESULTS

Mean absolute difference in teardrop referenced LLD between fluoroscopic and post-operative radiographs was 2.17 mm and based on the ischia mean absolute difference was 2.63 mm. Linear regression of fluoroscopic and post-operative radiograph LLD based on teardrop and ischia LLD found r² values of 0.57 and 0.84, respectively. Mean absolute difference between fluoroscopic and post-operative x-ray LLD was within 5 mm in 95% of cases regardless of pelvic reference.

CONCLUSION

This study demonstrates that a single fluoroscopic view obtained during DAA THA for leg length assessment is clinically useful.

Improved accuracy and fewer outliers with a novel CT-free robotic THA system in matched-pair analysis with manual THA

Accurate component orientation and restoration of hip biomechanics remains a continuing challenge in total hip arthroplasty (THA). The goal of this study was to analyze the accuracy/reproducibility of a novel CT-free and pin-less robotic-assisted THA (RA-THA) platform compared to manual THA (mTHA). This matched-pair cadaveric study compared this RA-THA system to mTHA (n = 33/arm), both using the assistance of fluoroscopic imaging, in a group of 14 high-volume arthroplasty surgeons. In both groups, surgeons were asked to aim for 40°/15° for cup inclination/version, and 0 mm of leg length discrepancy (LLD). A validated and accurate method using radio-opaque markers measured cup inclination/version and LLD. The accuracy and reproducibility (fewer outliers) of cup inclination was significantly improved in the robotic group (1.8° ± 1.3° vs 6.4° ± 4.9°, respectively, robotic vs manual; p < 0.001), with no significant difference between groups for version. The reproducibility of LLD was significantly improved in the robotic group (p = 0.003). For all parameters studied, the robotic group had an improved accuracy and lower variance (fewer outliers). The percentage of cases within the more restrictive Callanan safe zone was 100% for RA-THA vs 73% for mTHA (p = 0.002). The CT-free RA-THA platform, using only fluoroscopic imaging, demonstrated more accurate acetabular cup positioning, when compared to the mTHA procedures performed by high-volume hip surgeons (naive to this RA-THA platform), with respect to cup inclination and placement within the Lewinnek/Callanan safe zones. Future study must incorporate economic factors, lower volume surgeons, clinical and patient-centric outcomes, and other radiographic parameters in controlled studies in large sample sizes.

Can the use of an inclinometer improve acetabular cup inclination in total hip arthroplasty? A review of the literature

INTRODUCTION

The angle of acetabular (cup) radiographic inclination is an important measurement in total hip arthroplasty (THA) procedures. Abnormal radiographic inclination is associated with dislocation, edge loading and higher failure rates. Consistently achieving a satisfactory radiographic inclination remains a challenge. Inclinometers have been increasingly used over the last decade. This paper reviews the literature to determine whether using an inclinometer improves the accuracy of acetabular cup inclination in THA.

METHODS

A systematic literature search was performed. The following search terms were used: ('hip' OR 'hip replacement' OR 'hip arthroplasty' OR 'primary hip replacement' OR 'THR' OR 'THA' OR 'Acetabular cup Inclination') AND ('Inclinometer'). Titles and abstracts were screened for relevance. Both radiographic and operative inclination comparisons were included.

RESULTS

7 studies met the inclusion criteria. 2 were randomised control trials with level I evidence, and the remaining studies were cohort studies with level III/IV evidence. 5 were clinical and 2 experimental. In total there were 16 cohorts: 7 using an inclinometer, 6 freehand, and 3 using MAG techniques. All studies comparing radiographic inclination and 1 of 2 studies comparing operative inclination showed an improvement in the attainment of the optimal inclination. Similarly, the use of an inclinometer showed a reduction in the number of outliers when compared to MAG and freehand techniques.

DISCUSSION

This review demonstrates that using an inclinometer improved the surgeon's ability to achieve their intended inclination (both operative and radiographic) and reduced the incidence of positioning outside the safe-zone. However, only 2 of the studies were randomised control trials and these resulted in opposing conclusions. Therefore, further studies looking at the use of inclinometers would prove useful in understanding their true benefit.

Capsular Management in Direct Anterior Total Hip Arthroplasty: A Randomized, Single-Blind, Controlled Trial

BACKGROUND

The direct anterior approach (DAA) is a popular approach to total hip arthroplasty (THA). Unlike the posterior approach, the importance of anterior capsular management is unknown. This randomized controlled trial compares capsular repair versus capsulectomy.

METHODS

This single-surgeon, single-blinded, parallel-group randomized controlled trial occurred between 2013 and 2016. Patients undergoing unilateral, primary THA for osteoarthritis consented to undergo blinded, simple randomization to anterior capsulotomy with repair or anterior capsulectomy. Primary outcome measures included hip range of motion, hip flexion strength, and pain with seated hip flexion. Secondary outcome measures included surgical time, estimated blood loss, postoperative complications, and hip disability and osteoarthritis outcome score. Data were prospectively collected intraoperatively, six weeks, six months, an average of over 5 years postoperatively.

RESULTS

Ninety-eight patients were ultimately enrolled in the trial; 50 received capsulectomy and 48 received capsulotomy. No significant differences were seen in preoperative demographics or in primary or secondary outcomes during this study. No difference was seen in pain at final follow-up at average > 5 years postoperatively.

CONCLUSION

This study demonstrates that capsular management in DAA THA does not affect postoperative pain or range of motion. The anterior capsule's role in prosthetic stability after DAA THA remains uncertain, but it does not currently appear that repair provides benefit and may lead to increased surgical time and blood loss. As such, capsular management in DAA THA is at surgeon discretion.

Primary total hip arthroplasty via the direct anterior approach in the lateral decubitus position : surgical technique, learning curve, complications, and early results

AIMS

The direct anterior approach (DAA) for total hip arthroplasty (THA) has potential advantages over other approaches and is most commonly performed with the patient in the supine position. We describe a technique for DAA THA with the patient in the lateral decubitus position and report the early clinical and radiological outcomes, the characteristics of the learning curve, and perioperative complications.

METHODS

All primary DAA THAs performed in the lateral position by a single surgeon over a four-year period from the surgeon's first case using the technique were identified from a prospectively collected database. Modified Harris Hip Scores (mHHS) were collected to assess clinical outcome, and routine radiological analysis was performed. Retrospective review of the medical records identified perioperative complications, the characteristics of the learning curve, and revisions.

RESULTS

A total of 257 patients were included in the study. Their mean age was 60 years (SD 9.0). A total of 164 (64%) were female. The mean mHHS improved significantly from 52.1 (SD 16.2) preoperatively to 94.4 (SD 11) at a follow-up of one year (p < 0.001), with 212 of 225 patients (94%) achieving a minimal clinically important difference (MCID) (> 8 points). Radiological evaluation showed a mean leg length discrepancy of 2.6 mm (SD 5.9) and a mean difference in femoral offset of 0.2 mm (SD 4.9). A total of 234/243 acetabular components (96.3%) were positioned within Lewinnek's safe zone. Analysis of operating time, blood loss, the position of the components, and complications did not identify a learning curve. A total of 14 patients (5.4%) had a major perioperative complication and three (1.2%) required revision THA. There were no major neurovascular complications and no dislocations.

CONCLUSION

We have described and analyzed a surgical technique for undertaking DAA THA in the familiar lateral decubitus position using a routine operating table, positioning devices, and instrumentation, and shown that it can be performed safely and effectively under these circumstances. Cite this article: Bone Joint J 2021;103-B(7 Supple B):53-58.

Dislocation rates following total hip arthroplasty via the direct anterior approach in a consecutive, non-selective cohort

AIMS

Use of the direct anterior approach (DAA) for total hip arthroplasty (THA) has increased in recent years due to proposed benefits, including a lower risk of dislocation and improved early functional recovery. This study investigates the dislocation rate in a non-selective, consecutive cohort undergoing THA via the DAA without any exclusion or bias in patient selection based on habitus, deformity, age, sex, or fixation method.

METHODS

We retrospectively reviewed all patients undergoing THA via the DAA between 2011 and 2017 at our institution. Primary outcome was dislocation at minimum two-year follow-up. Patients were stratified by demographic details and risk factors for dislocation, and an in-depth analysis of dislocations was performed.

RESULTS

A total of 2,831 hips in 2,205 patients were included. Mean age was 64.9 years (24 to 96), mean BMI was 29.2 kg/m² (15.1 to 53.8), and 1,595 patients (56.3%) were female. There were 11 dislocations within one year (0.38%) and 13 total dislocations at terminal follow-up (0.46%). Five dislocations required revision. The dislocation rate for surgeons who had completed their learning curve was 0.15% compared to 1.14% in those who had not. The cumulative periprosthetic infection and fracture rates were 0.53% and 0.67%, respectively.

CONCLUSION

In a non-selective, consecutive cohort of patients undergoing THA via the DAA, the risk of dislocation is low, even among patients with risk factors for instability. Our data further suggest that the DAA can be safely used in all hip arthroplasty patients without an increased risk of wound complications, fracture, infection, or revision. The inclusion of seven surgeons increases the generalizability of these results. Cite this article: Bone Joint J 2021;103-B(7 Supple B):38-45.

Radiation exposure in fluoroscopy-guided anterior total hip arthroplasty: a systematic review

PURPOSE

To investigate the average fluoroscopy time, as well as the patient and surgical staff average radiation exposure in the context of intraoperative fluoroscopy use during anterior total hip arthroplasty (THA).

METHODS

PubMed, Cochrane, Embase, Web of Science and Scopus were systematically searched for studies pertaining to intraoperative anterior THA fluoroscopy (PROSPERO ID 258049). The comprehensive literary search was conducted using "THA," "fluoroscopy" and "radiation exposure" as the search criteria, which resulted in 187 total papers. Of these 187 papers, 11 studies were included in this systematic review as they involved anterior THA and specifically contained data regarding radiation exposure dose and/or time.

RESULTS

Eleven studies were included, enrolling 1839 patients. The average fluoroscopy time was 21.4 (95% confidence interval [CI] 16.6-26.1) seconds, whereas the average patient radiation dose was 1.8 × 10^-3 (95% CI 7.4 × 10^-4-2.9 × 10^-3) Gy.

CONCLUSIONS

Although several studies fail to report fluoroscopy time and radiation dose in THA patients, fluoroscopy-guided THA has emerged as a safe procedure. Additional studies may analyze if radiation exposure during the surgeon's THA learning curve is significantly higher, as well as what protocols may potentially reduce radiation exposure even further.

Anterior Total Hip Arthroplasty With Bulk Femoral Head Autograft in a Patient With Camurati-Engelmann Disease

Camurati-Engelmann disease (CED) is an extremely rare, sclerosing bone disorder of intramedullary ossification with only 300 reported cases worldwide. The pathogenesis is related to activating mutations in transforming growth factor beta 1, which results in bilateral, symmetric hyperostosis affecting primarily the diaphysis of long bones. Despite effective pharmacological treatment options, the diagnosis of CED is problematic owning to its rarity and variability of clinical presentation. We present a patient with known CED with advanced early hip osteoarthritis, secondary to underlying hip dysplasia, for which she underwent a successful total hip arthroplasty via a direct anterior approach with the use of bulk femoral head autograft to reconstruct her native acetabulum.

Acetabular and Femoral Component Positioning Using Direct Anterior Approach Versus Posterior Approach in Total Hip Arthroplasty

PURPOSE

Direct anterior approach (DAA) has recently become popular in total hip arthroplasty (THA). However, irrespective of the surgical approach used, component malposition is an important factor affecting function and complications after THA. This study aims to compare component positioning on the femoral and acetabular side between DAA and posterior approach (PA) to the hip joint. We hypothesized that the two approaches are similar in terms of component positioning.

METHODS

We prospectively studied 50 patients, matched according to age, sex, and body mass index, undergoing THA, divided non-randomly into 2 groups. Group 1 comprised 25 patients (35 hips) undergoing THA using DAA and group 2 comprised 25 patients (25 hips) undergoing THA using PA. Ten patients from group 1 had simultaneous bilateral THA. Radiological parameters studied were acetabular inclination (AI), coronal femoral stem alignment (CFA), leg length difference (LLD), acetabular cup version (AV), and femoral stem version (FV).

RESULTS

There was no significant difference in AI, CFA, LLD, AV, and FV between the two groups. Excellent to good inter and intra-observer reliability expressed in terms of intraclass correlation coefficient (ICC) was noted for all the radiographic measurements.

CONCLUSION

Both DAA and PA for THA achieve comparable radiological component positioning. DAA may not provide any advantage over PA in terms of positioning of the prosthesis.

LEVEL OF EVIDENCE

Level II, non-randomized comparative study.

Can Dislocation Rates Be Decreased Using the Anterior Approach in Patients With Lumbar Spondylosis or Lumbar Instrumented Fusion?

BACKGROUND

Although spinopelvic stiffness is known to contribute to instability following total hip arthroplasty (THA), it is unknown whether use of an anterior surgical approach is associated with decreased postoperative instability rates in patients with lumbar spondylosis or fusion.

METHODS

A retrospective review was performed of 1750 patients who underwent primary THA at our institution over an 8-year time period. Radiographic and chart review was performed evaluating for dislocations. Lumbar and pelvic radiographs were used to identify the presence of spondylosis and/or instrumented fusion. Patients were then divided into non-spondylosis and spondylosis or fusion groups to compare dislocation rates by surgical approach.

RESULTS

In total, 54.4% of THA patients had an anterior approach (n = 952) and 54.6% had lumbar spondylosis or instrumented fusion (n = 956). There were 29 dislocations in total (1.7%), with less occurring in anterior approach patients (0.6% vs 2.9%, P < .001). In the patients without lumbar spondylosis, there were less dislocations in the anterior approach group (0.2% vs 1.7%, P = .048). Likewise, in patients with lumbar spondylosis or fusion, there were less dislocations in the anterior approach group (1.0% vs 3.8%, P = .004). Using logistic regression, there was a 4.1× increased risk of dislocation with a posterior approach vs an anterior approach in the spondylosis or fusion group (P = .011).

CONCLUSION

Patients with lumbar spondylosis or fusion have high rates of instability. At our institution, we found that utilization of an anterior surgical approach substantially mitigated this risk.

Comparison of Component Placement Accuracy Using Two Intraoperative Fluoroscopic Grid Technologies During Direct Anterior Total Hip Arthroplasty

BACKGROUND

Intraoperative fluoroscopy is beneficial when performing total hip arthroplasty (THA) via the direct anterior approach; however, image distortion may influence component placement. A manual gridding system (MGS) and a digital gridding system (DGS) are commercially available, aimed at visually representing or correcting image distortion. Therefore, the purpose of this study is to compare component placement accuracy following direct anterior approach THA when intraoperative fluoroscopy was supplemented with MGS or DGS.

METHODS

A retrospective evaluation of acetabular cup abduction (ABD), leg length discrepancy (LLD) and global hip offset difference (GHO) was completed for consecutive patients from 6 week post-THA weight-bearing radiographs. The predefined target LLD and GHO was <10 mm and ABD target was 45° ± 10°. Differences between MGS and DGS were determined by independent t-tests.

RESULTS

The MGS (250 patients, 315 hips) and DGS (183 patients, 218 hips) achieved targeted ABD in 98.7% and 96.8% of cases, respectively, and ABD was significantly lower in the MGS group (45.14 ± 4.03° and 47.01 ± 4.39°, respectively) (P < .001). Compared to MGS, the DGS group averaged significantly higher GHO (3.64 ± 2.44 and 4.45 ± 2.73 mm, respectively, P = .002) but was not significantly different regarding LLD (2.92 ± 2.55 and 3.19 ± 2.46 mm, respectively, P = .275). No significant group difference was noted for percentage within the targeted LLD and GHO; however, 93.5% of DGS and 97.6% of MGS achieved all three (P = .031).

CONCLUSION

The use of both the MGS and DGS resulted in consistent component placement within the predefined target zone. Although the MGS appeared to be slightly more consistent, these differences are unlikely to be clinically significant.

Lewinnek Safe Zone References are Frequently Misquoted

Background

Optimal acetabular component orientation in total hip arthroplasty (THA) is a necessity in achieving a stable implant. Although there has been considerable debate in the literature concerning the safe zone, to date, there has not been any review to determine if these references are consistent with the definition applied by Lewinnek et al. in 1978. Therefore, this article aims to examine the available literature in the PubMed database to determine how often a correct reference to the safe zone as defined by Lewinnek was applied to discussions regarding THA.

Methods

A search for literature in the PubMed database was performed for articles from 1978 to 2019. Search criteria included terms ‘Lewinnek,’ ‘safe zone,’ and ‘total hip arthroplasty.’ Exclusions included abstract-only articles, non-English articles, articles unrelated to THA, and those lacking full content.

Results

A review of literature yielded 147 articles for inclusion. Overall, only 11% (17) cited the Lewinnek article correctly. Forty-five percent (66) of articles referenced measurements in the supine position, 18% (26) referenced other positions, and 37% (55) did not specify. Nineteen percent (28) reported measurements of the acetabular cup orthogonal to the anterior pelvic plane, while 73% (108) did not, and 7% (11) did not specify. Twenty-three percent (34) measured from computed tomography scans instead of other methods.

Conclusions

In the discussion of the safe zone regarding THA, only 11% of articles listed are consistent with the definition established by Lewinnek. This warrants further investigation into a consistent application of the term and its implications for THA implant stability and dislocation rates.

A comparison of leg length discrepancy between direct anterior and anterolateral approaches in total hip arthroplasty

Background

Leg length discrepancy (LLD) after total hip arthroplasty (THA) is a known source of complications and a leading cause of litigation (J Bone Joint Surg Br 87:155–157, 2005). There are limited studies investigating surgical approach combined with the use of fluoroscopy intraoperatively and their potential effects on LLD after THA. The purpose of this study was to compare the direct anterior (DA) approach utilizing a fluoroscopic overlay technique and anterolateral (AL) approach and their potential effect on LLD.

Methods

We retrospectively reviewed 121 patients who had undergone primary THA from September 1, 2016 to November 1, 2018 by either DA or AL approach by two separate surgeons. Leg length discrepancies were measured on pre-operative post-anesthesia care unit (PACU) and on post-operative low anterior/posterior (AP) pelvis plain radiographs by two investigators blinded to each other’s measurements. To confirm inter-observer and intra-observer reliability between LLD measurements amongst investigators, a Pearson correlation test was performed. The primary outcome measurement was leg length discrepancy (LLD).

Results

We observed LLD > 1.0 cm and LLD > 1.5 cm in the DA and AL groups. The DA approach group showed a mean LLD of 4.5 mm against 7.76 mm in the AL group (p < 0.00001). There was a significantly higher rate of LLD in the AL group as compared to the DA group (LLD> 1 cm (28% vs. 8%, p = 0.0037) and LLD > 1.5 cm (7% vs. 0%, p = 0.0096). The LLD measurements showed strong correlation in terms of inter-observer (r = 0.95) and intra-observer reliability (r = 0.99) between the two investigators (p < 0.001).

Conclusion

In our patient cohort, the DA approach with fluoroscopic overlay technique had less LLD in comparison with the AL approach, suggesting that intraoperative fluoroscopic use does have an impact on LLD.

Are single plane intraoperative and biplanar postoperative radiographic measurements of acetabular cup position the same?

PURPOSE

Supine positioning and the use of fluoroscopy during direct anterior approach total hip arthroplasty (DAA THA) have been reported to improve acetabular component positioning. This study aims to compare 2-dimensional intraoperative radiographic RadLink measurements of acetabular component position with 3-dimensional postoperative 3D SterEOS measurements.

METHODS

Intraoperative fluoroscopy and RadLink (El Segundo, CA, USA) were used to measure acetabular cup position intraoperatively in 48 consecutive patients undergoing DAA THA. Cup position was measured on 6-week postoperative standing EOS images using 3D SterEOS software (EOS Imaging, SA, Paris, France) and compared to RadLink findings using Student's t-test. Safe-zone outliers were identified. We evaluated for measurement difference of > +/- 5°.

RESULTS

RadLink acetabular cup abduction measurement (mean 43.0°) was not significantly different than 3D SterEOS in the anatomic plane (mean 42.6°, p = 0.50) or in the functional plane (mean 42.7°, p = 0.61). RadLink acetabular cup anteversion measurement (mean 17.9°) was significantly different than 3D SterEOS in both the anatomic plane (mean 20.6°, p = 0.022) and the functional plane (mean 21.2°, p = 0.002). RadLink identified 2 cups outside of the safe-zone. However, SterEOS identified 12 (anatomic plane) and 10 (functional plane) outside of the safe-zone. In the functional plane, 58% of anteversion and 92% of abduction RadLink measurements were within +/- 5° of 3D SterEOS.

CONCLUSIONS

Intraoperative fluoroscopic RadLink acetabular anteversion measurements are significantly different than 3D SterEOS measurements, while abduction measurements are similar. Significantly more acetabular cups were noted to be outside of the safe-zone when evaluated with 3D SterEOS versus RadLink.

Augmented Reality for Acetabular Component Placement in Direct Anterior Total Hip Arthroplasty

BACKGROUND

Malposition of the acetabular component of a hip prosthesis can lead to poor outcomes. Traditional placement with fluoroscopic guidance results in a 35% malpositioning rate. We compared the (1) accuracy and precision of component placement, (2) procedure time, (3) radiation dose, and (4) usability of a novel 3-dimensional augmented reality (AR) guidance system vs standard fluoroscopic guidance for acetabular component placement.

METHODS

We simulated component placement using a radiopaque foam pelvis. Cone-beam computed tomographic data and optical data from a red-green-blue-depth camera were coregistered to create the AR environment. Eight orthopedic surgery trainees completed component placement using both methods. We measured component position (inclination, anteversion), procedure time, radiation dose, and usability (System Usability Scale score, Surgical Task Load Index value). Alpha = .05.

RESULTS

Compared with fluoroscopic technique, AR technique was significantly more accurate for achieving target inclination (P = .01) and anteversion (P = .02) and more precise for achieving target anteversion (P < .01). AR technique was faster (mean ± standard deviation, 1.8 ± 0.25 vs 3.9 ± 1.6 minute; P < .01), and participants rated it as significantly easier to use according to both scales (P < .05). Radiation dose was not significantly different between techniques (P = .48).

CONCLUSION

A novel 3-dimensional AR guidance system produced more accurate inclination and anteversion and more precise anteversion in the placement of the acetabular component of a hip prosthesis. AR guidance was faster and easier to use than standard fluoroscopic guidance and did not involve greater radiation dose.

A new method for intraoperative assessment of leg length, sizing and placement of the components in total hip replacement

BACKGROUND

Intraoperative radiograph of the pelvis is a well-established way to avoid misplacement/undersizing of the components and leg length discrepancy (LLD) in total hip replacement (THR). We describe a method for the obtainment and the evaluation of intraoperative radiographs with a sophisticated wireless radiographic system and a computerized digital tool originally used for preoperative templating.

METHODS

In this retrospective case-control study, 60 patients with unilateral hip osteoarthritis who underwent THR with intraoperative radiographic check with the conventional method (n = 30, control group) or the new method (AGFA flat panel DR14eG™/Orthosize™, n = 30, case group) were evaluated and compared for operation time, intraoperative changes in size/placement of the components and final radiological outcome (LLD, acetabular inclination and femoral offset) based on postoperative radiographs of the pelvis.

RESULTS

Mean operation time was lower in case group (85.3 min vs. 103.3 min, p value < 0.005), as well as mean absolute LLD (1.93 mm vs. 2.94 mm, p value = 0.242). There was a higher percentage of intraoperative changes in the offset of the prostheses' head (70% vs. 40%, p value = 0.018) and a significantly lower percentage of patients with LLD > 5 mm in the case group (0% vs. 27%, p value = 0.002).

CONCLUSIONS

This new method for the obtainment and assessment of intraoperative radiographs proved to be fast and assuring for keeping LLD below 5 mm in all patients.

Effect of pelvic tilt and rotation on cup orientation in standing anteroposterior radiographs

BACKGROUND

Individual pelvic tilt and rotation have wide variability that can affect the measurement of cup orientation in anteroposterior (AP) radiographs. The purpose of this study was to analyse the effect of pelvic tilt and rotation on radiographic measurements of cup orientation.

METHODS

A total of 53 patients (63 hips) were included in this study. The patients underwent a computed tomography study with standing AP pelvis radiographs taken both preoperatively and approximately 3 months postoperatively. We used 2-dimensional/3-dimensional matching to measure the pelvic tilt and rotation, and the non-standardised and standardised cup orientation.

RESULTS

There was no difference in the pelvic tilt and rotation between the preoperative and postoperative radiographs. The distribution of the differences between the non-standardised and standardised cup anteversion exhibited a change within 5° in only 34/63 (54%) hips. The pelvic tilt correlated with the difference between the non-standardised and standardised cup anteversion, but the pelvic rotation did not. When all 63 hips were separated into the right and left sides, the pelvic rotation inversely correlated with the pelvic tilt-adjusted difference between the non-standardised and standardised cup anteversion of the right side but directly correlated with that of the left side.

CONCLUSIONS

The current study demonstrated that the measurement of cup anteversion in standing AP radiographs is significantly affected by both the pelvic tilt and pelvic rotation. An improved understanding of the pelvic orientation may eventually allow for desired cup positioning on a patient-specific basis to potentially reduce complications associated with the malposition of the cup.

Intraoperative evaluation of acetabular cup position during anterior approach total hip arthroplasty: are we accurately interpreting?

INTRODUCTION

Intraoperative radiographic evaluation during total hip arthroplasty (THA) has shown to improve the accuracy of acetabular component placement, however, differences in interpretation based on radiographic technique has not been established. This study aims to determine if differences exist in the interpretation of acetabular component abduction and anteversion between different radiographic projections.

METHODS

55 consecutive direct anterior THAs in 49 patients were prospectively enrolled. Target anteversion and abduction was defined by the Lewinnek zone. Fluoroscopy was used to direct acetabular component placement intraoperatively. After final cup implantation, fluoroscopic posterior-anterior hip and pelvis images were obtained for analysis. After completion of the procedure, an anterior-posterior plain pelvis radiograph was obtained in the operating room. Acetabulum component abduction and anteversion were postoperatively determined using specialised software on each of the 3 image acquisition methods.

RESULTS

Average acetabular cup abduction for intraoperative fluoroscopic posterior-anterior hip (FH), intraoperative fluoroscopic posterior-anterior pelvis (FP), and postoperative, standard, anteroposterior pelvis radiographs (PP) was 40.95° ± 2.87°, 38.87° ± 3.82° and 41.73° ± 2.96° respectively. The fluoroscopic hip and fluoroscopic pelvis tended to underestimate acetabular cup abduction compared to the postoperative pelvis (p < 0.001). Average acetabular cup anteversion for FH, FP, and PP was 19.89° ± 4.87°, 24.38° ± 5.31° and 13.36° ± 3.52° respectively. Both the fluoroscopic hip and fluoroscopic pelvis overestimated anteversion compared to the AP pelvis, with a 6.38° greater mean value measurement for FH (p < 0.001), and an 11° greater mean value measurement for FP (p < 0.001).

CONCLUSIONS

Fluoroscopic technique and differences between radiographic projections may result in discrepancies in component position interpretation. Our results support the use of the fluoroscopic posterior-anterior hip as the choice fluoroscopic imaging technique.

Does the use of intraoperative fluoroscopy improve postoperative radiographic component positioning and implant size in total hip arthroplasty utilizing a direct anterior approach?

Background

The direct anterior approach (DAA) for total hip arthroplasty (THA) has gained recent popularity, with 1 purported benefit being access to intraoperative fluoroscopy. However, there are limited data demonstrating improved component position with the use of intraoperative fluoroscopy. The aim of this study is to compare radiographic implant positioning on 2 consecutive cohorts of patients undergoing DAA THA performed by 1 surgeon either utilizing intraoperative fluoroscopy or not. We hypothesized that there would be no relevant radiographic differences between the cohorts.

Methods

Forty-two consecutive patients underwent DAA THA utilizing fluoroscopy (IFC), and 42 consecutive patients then underwent DAA THA without fluoroscopy (NFC). Using preoperative pelvis radiographs and 6-week postoperative pelvis radiographs, acetabular anteversion, inclination, femoral offset, and templated component sizes vs final intraoperatively selected sizes were recorded and compared between cohorts.

Results

Acetabular inclination was 45.0° for IFC and 45.6° for NFC (P = .629). Femoral offset difference preoperatively and postoperatively was 0.8 mm for IFC and 1.3 mm for NFC (P = .734). Number of hips within the so-called safe zone was 32 for IFC and 33 for NFC (P = .794). These all demonstrated no significant difference between the cohorts. However, acetabular anteversion was 13.7° for IFC and 11.2° for NFC (P = .02).

Conclusions

In this limited series, the routine use of intraoperative fluoroscopy did not improve implant positioning or sizing. This may be surgeon-specific or due to the result of the use of acetabular landmarks to guide placement of the components without fluoroscopy.

Ten- to Sixteen-Year Follow-Up of Highly Cross-Linked Polyethylene in Total Hip Arthroplasty: What Factors Affect Wear?

BACKGROUND

Increase in acetabular cup abduction in total hip arthroplasty (THA) using conventional polyethylene is associated with greater linear wear. Whether this relationship holds true for highly crosslinked liners, particularly with long-term follow-up, is still controversial. The effect of liner thickness on wear of highly cross-linked liners also remains to be clarified.This study sought to determine (1) the long-term clinical and radiological performance of highly cross-linked polyethylene in THA and (2) the effect of acetabular component positioning, polyethylene thickness, and patient demographics on wear.

METHODS

Ninety-three THAs using a 28-mm hip ball, single brand of highly cross-linked polyethylene liner, and cementless cup were performed in 87 patients. Clinical outcomes were evaluated using the Harris Hip Score and need for revision surgery. Linear and volumetric wear, presence of osteolysis, and cup abduction angle were assessed.

RESULTS

The mean age at operation was 51.4 years. The mean duration of follow-up was 12.7 years (10-16 years). Patients aged >50 years had higher rates of linear wear than those aged <50 years (P = .015). Positive correlation was found between cup abduction angle (P = .014) and cup version (P = .035) with a linear wear rate. Thinner liners (≤7 mm) had similar rates of linear and volumetric wear as thicker liners (≥8 mm) (P = .447).

CONCLUSION

This is the only study to demonstrate a positive significant relationship between cup abduction angle and version with linear wear rate in THA with at least 10 years of follow-up. Liner thickness was not found to affect wear rates.

Changes in acetabular orientation during total hip arthroplasty

AIMS

The aims of this study were to determine the change in pelvic sagittal alignment before, during, and after total hip arthroplasty (THA) undertaken with the patient in the lateral decubitus position, and to determine the impact of these changes on acetabular component position.

PATIENTS AND METHODS

We retrospectively compared the radiological pelvic ratio among 91 patients undergoing THA. In total, 41 patients (46%) were female. The mean age was 61.6 years (sd 10.7) and the mean body mass index (BMI) was 20.0 kg/m² (sd 5.5). Anteroposterior radiographs were obtained: in the standing position preoperatively and at six weeks postoperatively; in the lateral decubitus position after trial reduction intraoperatively; and in the supine position in the post-anaesthesia care unit. Pelvic ratio was defined as the ratio between the vertical distance from the inferior aspect of the sacroiliac (SI) joints to the superior pubic symphysis and the horizontal distance between the inferior aspect of the SI joints. Changes in the apparent component position based on changes in pelvic ratio were determined, with a change of > 5° considered clinically significant. Analyses were performed using Wilcoxon's signed-rank test, with p < 0.05 considered significant.

RESULTS

Intraoperatively, in the lateral decubitus position, the pelvic ratio increased (anterior tilt) in 69.4% of cases, did not change significantly in 20.4%, and decreased (posterior tilt) in 10.2% of cases. When six-week postoperative radiographs were compared with preoperative radiographs, the pelvic ratio decreased in 44.9% of cases, did not change significantly in 42.3%, and increased in 12.8% of cases. This change in alignment correlated with a change in acetabular component version of > 5° in 79.6% of cases intraoperatively and 57.7% of cases at six weeks postoperatively.

CONCLUSION

Changes in pelvic sagittal pelvic position occur throughout THA that, if unaccounted for, introduce errors in acetabular component placement. The use of intraoperative imaging may help the appropriate placement of the acetabular component. Cite this article: Bone Joint J 2019;101-B(6 Supple B):45-50.

Can some early revision total hip arthroplasties be avoided?

Aims

Studying the indications for revision total hip arthroplasty (THA) may enable surgeons to change their practice during the initial procedure, thereby reducing the need for revision surgery. The aim of this study was to identify and describe the potentially avoidable indications for revision THA within five years of the initial procedure.

Patients and Methods

A retrospective review of 117 patients (73 women, 44 men; mean age 61.5 years (27 to 88)) who met the inclusion criteria was conducted. Three adult reconstruction surgeons independently reviewed the radiographs and medical records, and they classified the revision THAs into two categories: potentially avoidable and unavoidable. Baseline demographics, perioperative details, and quality outcomes up to the last follow-up were recorded.

Results

A total of 60 revision THAs (51.3%) were deemed potentially avoidable and 57 (48.7%) were deemed unavoidable. The following were identified as avoidable factors: suboptimal positioning of the acetabular component (29; 48%), intraoperative fracture or a fracture missed on an intraoperative radiograph (20; 33%), early (less than two weeks) aseptic loosening (seven; 11.7%), and symptomatic leg length discrepancy of > 1 cm (four; 6.7%).

Conclusion

A surprisingly large proportion of acute revision THAs are potentially avoidable. Surgeons must carefully evaluate the indications for revision THAs in their practice and identify new methods to address these issues. Cite this article: Bone Joint J 2019;101-B(6 Supple B):97–103.

Pelvic positioning in the supine position leads to more consistent orientation of the acetabular component after total hip arthroplasty

Aims

This study aims to: determine the difference in pelvic position that occurs between surgery and radiographic, supine, postoperative assessment; examine how the difference in pelvic position influences subsequent component orientation; and establish whether differences in pelvic position, and thereafter component orientation, exist between total hip arthroplasties (THAs) performed in the supine versus the lateral decubitus positions.

Patients and Methods

The intra- and postoperative anteroposterior pelvic radiographs of 321 THAs were included; 167 were performed with the patient supine using the anterior approach and 154 were performed with the patient in the lateral decubitus using the posterior approach. The inclination and anteversion of the acetabular component was measured and the difference (Δ) between the intra- and postoperative radiographs was determined. The target zone was inclination/anteversion of 40°/20° (± 10°). Changes in the tilt, rotation, and obliquity of the pelvis on the intra- and postoperative radiographs were calculated from Δinclination/anteversion using the Levenberg–Marquardt algorithm.

Results

The mean postoperative inclination/anteversion was 40° (± 8°)/23° (± 9°) with Δinclination and/or Δanteversion > ± 10° in 74 (21%). Intraoperatively, the pelvis was anteriorly tilted by a mean of 4° (± 10°), internally rotated by a mean of 1° (± 10°) and adducted by a mean of 1° (± 5°). Having Δinclination and/or Δanteversion > ± 10° was associated with a 3.5 odds ratio of having the acetabular component outside the target zone. A greater proportion of THAs that were undertaken with the patient in the lateral decubitus position had Δinclination and/or Δanteversion > ± 10° (35.3%, 54/153) compared with those in the supine position (4.8%, 8/167; p < 0.001). A greater number of acetabular components were within the target zone in THAs undertaken with the patient in the supine position (72%, 120/167), compared with those in the lateral decubitus position (44%, 67/153; p < 0.001). Intraoperatively, the pelvis was more anteriorly tilted (p < 0.001) and more internally rotated (p = 0.04) when the patient was in the lateral decubitus position.

Conclusion

The pelvic position is more reliable when the patient is in the supine position, leading to more consistent orientation of the acetabular component. Significant differences in pelvic tilt and rotation are seen with the patient in the lateral decubitus position. Cite this article: Bone Joint J 2018;100-B:1280–8.

Does Intraoperative Fluoroscopy Improve Limb-Length Discrepancy and Acetabular Component Positioning During Direct Anterior Total Hip Arthroplasty?

BACKGROUND

One potential benefit of the direct anterior approach (DAA) for total hip arthroplasty is the ability to use intraoperative fluoroscopy for acetabular cup positioning and limb-length evaluation. Previous studies comparing the use of fluoroscopy with an anterior approach to a posterior approach have reported conflicting results. To our knowledge, no prior study has compared acetabular cup position and limb-length discrepancy (LLD) using a DAA with and without fluoroscopy.

METHODS

We retrospectively reviewed the charts of 298 patients who underwent direct anterior total hip arthroplasty with or without intraoperative fluoroscopy. All procedures were performed by 2 surgeons who use DAA as their primary approach. Preoperative and 6-week postoperative low anteroposterior pelvis and cross-table lateral radiographs were reviewed by 3 independent surgeons. Acetabular cup inclination, anteversion, and LLD were measured and compared.

RESULTS

Thirty-three patients were excluded for inadequate imaging, leaving 125 patients in the fluoroscopy group and 140 patients in the nonfluoroscopy group. Mean inclination, anteversion, and LLD were 39.4° (95% confidence interval [CI], 38.5°-40.2°), 30.2° (95% CI, 29.2°-31.2°), and 1.1 mm (95% CI, 0.1 mm-2.2 mm) for the fluoroscopy group and 39.9° (95% CI, 39.3°-40.5°), 31.1° (95% CI, 30.0°-32.2°), and 0.8 mm (95% CI, -0.1 mm to 1.6 mm) for the nonfluoroscopy group. There was no significant difference in acetabular inclination (P = .35), anteversion (P = .22), or postoperative LLD (P = .64) between groups.

CONCLUSION

This study found no clinically or statistically significant difference in acetabular inclination, anteversion, or LLD between the fluoroscopy and nonfluoroscopy groups. Both surgeons achieved a similar mean acetabular cup position and an equivalent mean LLD.

Total hip arthroplasty after a previous pelvic osteotomy: A systematic review and meta-analysis

BACKGROUND

There are several reports regarding total hip arthroplasty (THA) after a previous pelvic osteotomy (PO). However, to our knowledge, until now there has been no formal systematic review and meta-analysis published to summarize the clinical results of THA after a previous PO. Therefore, we conducted a systematic review and meta-analysis of results of THA after a previous PO. We focus on these questions as follows: does a previous PO affect the results of subsequent THA, such as clinical outcomes, operative time, operative blood loss, and radiological parameters.

METHODS

Using PubMed, Web of Science, and Cochrane Library, we searched for relevant original papers. The pooling of data was performed using RevMan software (version 5.3, Cochrane Collaboration, Oxford, UK). A p-value<0.05 was judged as significant. Standardized mean differences (SMD) were calculated for continuous data with a 95% confidence interval (CI) was reported. Statistical heterogeneity was assessed based on I² using standard χ² test. When I²>50%, significant heterogeneity was assumed and a random-effects model was applied for the meta-analysis. A fixed-effects model was applied in the absence of significant heterogeneity.

RESULTS

Eleven studies were included in this meta-analysis. The pooled results indicated that there was no significant difference in postoperative Merle D'Aubigne-Postel score (I²=0%, SMD=-0.15, 95% CI: -0.36 to 0.06, p=0.17), postoperative Harris hip score (I²=60%, SMD=-0.23, 95% CI: -0.50 to 0.05, p=0.10), operative time (I²=86%, SMD=0.37, 95% CI: -0.09 to 0.82, p=0.11), operative blood loss (I²=82%, SMD=0.23, 95% CI: -0.17 to 0.63, p=0.25), and cup abduction angle (I²=43%, SMD=-0.08, 95% CI: -0.25 to 0.09, p=0.38) between THA with and without a previous PO. However, cup anteversion angle of THA with a previous PO was significantly smaller than that of without a previous PO (I²=77%, SMD=-0.63, 95% CI: -1.13 to -0.13, p=0.01).

CONCLUSION

Systematic review and meta-analysis of results of THA after a previous PO was performed. A previous PO did not affect the results of subsequent THA, except for cup anteversion. Because of the low quality evidence currently available, high-quality randomized controlled trials are required.

LEVEL OF EVIDENCE

Level III, meta-analysis of case-control studies.

Prevention of Dislocation After Total Hip Arthroplasty

BACKGROUND

Prevention of dislocation after primary total hip arthroplasty (THA) begins with patient preoperative assessment and planning.

METHODS

We performed a literature search to assess historical perspectives and current strategies to prevent dislocation after primary THA. The search yielded 3458 articles, and 154 articles are presented.

RESULTS

Extremes of age, body mass index >30 kg/m², lumbosacral pathology, surgeon experience, and femoral head size influence dislocation rates after THA. There is mixed evidence regarding the effect of neuromuscular disease, sequelae of pediatric hip conditions, and surgical approach on THA instability. Sex, simultaneous bilateral THA, and restrictive postoperative precautions do not influence the dislocation rates of THA. Navigation, robotics, lipped liners, and dual-mobility acetabular components may improve dislocation rates.

CONCLUSIONS

Risks for dislocation should be identified, and measures should be taken to mitigate the risk. Reliance on safe zones of acetabular component positioning is historical. We are in an era of bespoke THA surgery.

Effect of Pelvic Tilt and Rotation on Cup Orientation in Both Supine and Standing Positions

BACKGROUND

The purpose of this study is to analyze the effect of pelvic tilt and rotation on radiographic measurement of cup orientation.

METHODS

A total of 68 patients (79 hips) were included in this study. The patients had a computed tomography study and approximately 3 months of postoperative standing anteroposterior pelvic radiographs in both supine and standing positions. We used 2-dimensional (2D)/3-dimensional (3D) matching to measure pelvic tilt and rotation, and cup orientation.

RESULTS

There was a wide range of pelvic tilt between individuals in both supine and standing positions. Supine pelvic tilt was different from standing pelvic tilt (P < .05). There were differences in cup anteversion before and after 2D/3D matching in both supine and standing positions (P < .05). Supine and standing pelvic tilt correlated with differences in cup anteversion before and after 2D/3D matching. When all 79 hips were separated into right and left side, pelvic rotation inversely correlated with the pelvic tilt-adjusted difference in anteversion before and after 2D/3D matching of the right side but directly correlated with that of the left side in both supine and standing positions.

CONCLUSION

This study demonstrated that the measurement of cup anteversion on anteroposterior radiographs is significantly affected by both pelvic tilt and pelvic rotation (depending on the side). Improved understanding of pelvic orientation and improved ability to measure pelvic orientation may eventually allow for desired cup positioning to potentially protect against complications associated with malposition of the cup.

The Acetabular Fossa May Not Be Located at the True Center of the Acetabulum: A Detailed Analysis Using Preoperative CT Images

BACKGROUND

The acetabular fossa is thought to be located in the center of the acetabulum, and acetabular reaming in total hip arthroplasty is conventionally performed in the center of the fossa. However, the actual location of the fossa and the influence that hypoplasia or deformity may have on the position of the fossa are unknown. We hypothesized that the fossa is located in the center of the acetabulum, regardless of hypoplasia or deformity.

METHODS

Fifty patients with normal hips (normal hip group), 50 patients with dysplasia who underwent rotational acetabular osteotomy (dysplastic hip group), and 46 patients with osteoarthritis who underwent total hip arthroplasty (osteoarthritic hip group) were evaluated by computed tomography (CT) imaging. On the horizontal plane that passes through the center of the femoral head, the center line of the acetabulum was defined as the perpendicular bisector of the anterior and posterior rims of the acetabulum. The angle and distance of the center of the acetabular fossa in relation to the center line of the acetabulum were evaluated; furthermore, the center position of the fossa from the anterior margin of the acetabulum was calculated as a ratio relative to acetabular size. A 1-way analysis of variance was performed to compare measurements among the 3 groups.

RESULTS

The center of the acetabular fossa was positioned anteriorly to the center line of the acetabulum in all 3 groups. The mean center angle of the acetabular fossa was 14.0° ± 3.8°, 15.2° ± 5.6°, and 14.9° ± 5.5° in the normal, dysplastic, and osteoarthritic hip groups, respectively (p = 0.33). The mean center distance of the acetabular fossa was 5.6 ± 1.8, 5.8 ± 2.3, and 6.1 ± 2.2 mm, respectively (p = 0.55). The mean center position of the acetabular fossa was 38.8% ± 3.3%, 38.5% ± 4.2%, and 38.3% ± 3.9%, respectively (p = 0.71).

CONCLUSIONS

The center of the acetabular fossa is positioned anteriorly to the center of the acetabulum, and the positioning is affected by neither dysplasia nor osteoarthritis. The preconception that the center of the acetabulum corresponds to the center of the acetabular fossa may risk eccentric reaming, possibly damaging the anterior wall.

LEVEL OF EVIDENCE

Prognostic Level III. See Instructions for Authors for a complete description of levels of evidence.

Digital Radiography in Total Hip Arthroplasty: Technique and Radiographic Results

BACKGROUND

Obtaining the ideal acetabular cup position in total hip arthroplasty remains a challenge. Advancements in digital radiography and image analysis software allow the assessment of the cup position during the surgical procedure. This study describes a validated technique for evaluating cup position during total hip arthroplasty using digital radiography.

METHODS

Three hundred and sixty-nine consecutive patients undergoing total hip arthroplasty were prospectively enrolled. Preoperative supine anteroposterior pelvic radiographs were made. Intraoperative anteroposterior pelvic radiographs were made with the patient in the lateral decubitus position. Radiographic beam angle adjustments and operative table adjustments were made to approximate rotation and tilt of the preoperative radiograph. The target for cup position was 30° to 50° abduction and 15° to 35° anteversion. Intraoperative radiographic measurements were calculated and final cup position was determined after strict impingement and range-of-motion testing. Postoperative anteroposterior pelvic radiographs were made. Two independent observers remeasured all abduction and anteversion angles.

RESULTS

Of the cups, 97.8% were placed within 30° to 50° of abduction, with a mean angle (and standard deviation) of 39.5° ± 4.6°. The 2.2% of cups placed outside the target zone were placed so purposefully on the basis of intraoperative range-of-motion testing and patient factors, and 97.6% of cups were placed between 15° and 35° of anteversion, with a mean angle of 26.6° ± 4.7°. Twenty-eight percent of cups were repositioned on the basis of intraoperative measurements. Subluxation during range-of-motion testing occurred in 3% of hips despite acceptable measurements, necessitating cup repositioning. There was 1 early anterior dislocation.

CONCLUSIONS

Placing the acetabular component within a target range is a critical component to minimizing dislocation and polyethylene wear in total hip arthroplasty. Using digital radiography, we positioned the acetabular component in our desired target zone in 97.8% of cases and outside the target zone, purposefully, in 2.2% of cases. When used in conjunction with strict impingement testing, digital radiography allows for predictable cup placement in total hip arthroplasty.